{"title":"Anycubic FDM 3D Printers","description":"\u003cp\u003e\u003cstrong\u003eAnycubic\u003c\/strong\u003e filament 3D printers and their \u003cstrong\u003eACE 2 Pro\u003c\/strong\u003e multicolour system: the \u003cstrong\u003eKobra S1 Max Combo\u003c\/strong\u003e, an enclosed 350 mm CoreXY with a heated chamber, and the \u003cstrong\u003eKobra X\u003c\/strong\u003e, which prints in 4 colours out of the box.\u003c\/p\u003e","products":[{"product_id":"anycubic-kobra-s1-max-combo","title":"Anycubic Kobra S1 Max Combo - 350 mm Enclosed CoreXY FDM 3D Printer with ACE 2 Pro, 4 Colours and Heated Chamber","description":"\u003ch2\u003eAnycubic Kobra S1 Max Combo: 350 mm enclosed CoreXY FDM 3D printer with ACE 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThe Anycubic Kobra S1 Max Combo is a large-format, enclosed CoreXY FDM 3D printer that comes with an ACE 2 Pro unit so you can print in 4 colours from day one. It prints parts up to 350 × 350 × 350 mm, with a nozzle reaching 350 °C, a bed up to 120 °C and an actively heated chamber up to 65 °C for ABS, ASA, PC or nylon. It's for anyone who wants large parts, colour and engineering materials in the same machine.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 350 × 350 × 350 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e fully enclosed CoreXY, with linear rails on X\/Y and a Z axis with three lead screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticolour as standard:\u003c\/strong\u003e 1 ACE 2 Pro included (4 colours), expandable to 16 colours with 4 units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e the ACE 2 Pro dries filament at up to 65 °C, even while printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatures:\u003c\/strong\u003e nozzle 350 °C, bed 120 °C, active chamber 65 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 300 mm\/s recommended and 600 mm\/s maximum, with 20,000 mm\/s², according to Anycubic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.4 mm quick-swap hardened steel, plus a 0.6 mm one in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera:\u003c\/strong\u003e 720p, timelapse and AI detection of spaghetti, foreign objects and parts detaching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtras:\u003c\/strong\u003e activated carbon filter, 2.4\/5 GHz Wi-Fi and Ethernet port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eIt's for anyone who has outgrown a 220 or 256 mm printer: helmets, cosplay parts, scale models, large prototypes or several parts at once. Being enclosed and with a heated chamber, it's also suited to functional parts in ABS, ASA, PC, PA or fibre-filled composites, which warp on an open printer. The combo makes sense if you want colour or soluble PVA supports. If you're only going to print single-colour PLA, it's more machine than you need.\u003c\/p\u003e\n\n\u003ch3\u003eThe technology, no hype\u003c\/h3\u003e\n\u003ch4\u003eEnclosed CoreXY\u003c\/h4\u003e\n\u003cp\u003eThe print head moves in X and Y with two motors working together, and the bed only moves down in Z. The part doesn't move side to side, which is what allows high speeds on tall prints. The Z axis uses one motor, three lead screws and three guide rods.\u003c\/p\u003e\n\u003ch4\u003eReal-world speed\u003c\/h4\u003e\n\u003cp\u003eAnycubic advertises 600 mm\/s and 20,000 mm\/s², but the brand itself recommends working at 300 mm\/s. The maximums are machine figures. On a typical part, what matters is the quality you ask for, the material and, in multicolour, the colour changes.\u003c\/p\u003e\n\u003ch4\u003eChamber heated to 65 °C\u003c\/h4\u003e\n\u003cp\u003eAt the back there's a PTC heater with two fans that keep the chamber air at the temperature you choose, up to 65 °C. With ABS, PC or PA it reduces warping and improves layer adhesion. It's not used with PLA, PETG or TPU, as Anycubic warns that the filament softens and clogs the extruder.\u003c\/p\u003e\n\u003ch4\u003eHotend, bed and levelling\u003c\/h4\u003e\n\u003cp\u003eQuick-swap hotend with a 0.4 mm hardened steel nozzle. It accepts 0.25, 0.6 and 0.8 mm nozzles. For carbon or glass fibre, Anycubic recommends the 0.6 mm nozzle, which comes in the box. The bed is 1600 W at 220 V, with a flexible steel plate. Levelling is automatic, using a strain gauge in the print head.\u003c\/p\u003e\n\u003ch4\u003eMaterials\u003c\/h4\u003e\n\u003cp\u003eAccording to Anycubic: PLA, PETG, TPU, PET, PLA-CF, PETG-CF, PVA, ABS, ASA, PC, PA, PA6-CF, PC-CF, PC-GF and PET-CF. \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/technical-filaments\"\u003eEngineering filaments\u003c\/a\u003e are where you'll get the most out of the heated chamber.\u003c\/p\u003e\n\n\u003ch3\u003eMulticolour with ACE 2 Pro\u003c\/h3\u003e\n\u003cp\u003eThe ACE 2 Pro sits on top of the printer. It has 4 slots, each with its own motor. The printer has a single nozzle: when changing colour it cuts the filament, the ACE retracts it and loads the next one, and the nozzle purges through the side waste chute. Anycubic doesn't publish how much material is wasted per change, but on parts with many changes per layer, the purge adds up.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e 4 as standard, 8 with two ACE 2 Pro units and 16 with four, adding the input modules specified by Anycubic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e up to 65 °C, with three modes: dry while printing, before printing or drying only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRFID:\u003c\/strong\u003e with chipped Anycubic spools it automatically recognises material and colour and calculates what's left. For example, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-basic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA Basic with RFID\u003c\/a\u003e or \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA+ with RFID\u003c\/a\u003e. With other brands, you enter it manually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardboard spools:\u003c\/strong\u003e Anycubic doesn't recommend them as they are. It suggests printing adapter rings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e ACE 2 Pro only. The first-generation ACE Pro doesn't work with the S1 Max.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo add more colours you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-s1-x\"\u003eACE 2 Pro for Kobra S1 and Kobra X\u003c\/a\u003e, not the Kobra 3 version.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKobra S1 Max printer and ACE 2 Pro unit.\u003c\/li\u003e\n\u003cli\u003e2 power cables, signal cable and 4 PTFE tubes.\u003c\/li\u003e\n\u003cli\u003eReturn detection module with 4-in-1 hub.\u003c\/li\u003e\n\u003cli\u003eSpool holder, for printing without the ACE.\u003c\/li\u003e\n\u003cli\u003eWiping module and nozzle rest base.\u003c\/li\u003e\n\u003cli\u003e0.6 mm hardened steel nozzle and activated carbon pack.\u003c\/li\u003e\n\u003cli\u003eScrews, 2 cable clips, Allen keys, grease, cleaning needle and filament samples.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eKobra S1 Max Combo\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eFDM, enclosed CoreXY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e350 × 350 × 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e300 mm\/s recommended, 600 mm\/s maximum (according to Anycubic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum acceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.08-0.28 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened steel 0.4 mm (optional 0.25 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatures\u003c\/td\u003e\n\u003ctd\u003eNozzle 350 °C, bed 120 °C, chamber 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulticolour\u003c\/td\u003e\n\u003ctd\u003e4 colours as standard, up to 16 with 4 ACE 2 Pro units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e4.3\" touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi 2.4\/5 GHz, Ethernet, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e1000 W \/ 2200 W (according to Anycubic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003ePrinter 502.7 × 483 × 584 mm; ACE 2 Pro 368 × 291.5 × 236.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e25.7 kg printer + 3.7 kg ACE 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSoftware and connectivity\u003c\/h3\u003e\n\u003cp\u003eYou slice with Anycubic Slicer Next, and Anycubic also lists OrcaSlicer. With the Anycubic app you can start jobs, view the camera and receive notifications. If you'd rather not go through the cloud, there's a LAN mode. The menu is available in 10 languages, including Spanish. To find out how much each part costs you, try the \u003ca href=\"https:\/\/mrresin.es\/en\/pages\/3d-filament-cost-calculator\"\u003efilament cost calculator\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/creality-k2-plus-combo\"\u003eCreality K2 Plus Combo\u003c\/a\u003e:\u003c\/strong\u003e its direct rival, also a 350 mm enclosed CoreXY with a multicolour unit (CFS). I'd choose based on ecosystem: if you already use Anycubic filament and slicer, go for the S1 Max; if you're coming from Creality, the K2 Plus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-kobra-x\"\u003eAnycubic Kobra X\u003c\/a\u003e:\u003c\/strong\u003e open, bed-slinger, 260 mm and 4 colours without an external unit. Smaller and simpler, but not for engineering materials that need a heated chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/creality-k1c-2025\"\u003eCreality K1C 2025\u003c\/a\u003e:\u003c\/strong\u003e a more compact, single-colour enclosed CoreXY. If you don't need 350 mm or colour, it's the sensible choice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/elegoo-centauri-2-combo\"\u003eElegoo Centauri 2 Combo\u003c\/a\u003e:\u003c\/strong\u003e open 256 mm CoreXY with 4 colours, designed for PLA and PETG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find them all in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/fdm-3d-printers\"\u003eFDM 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone short on space: it takes up a footprint of about 50 × 48 cm, with the ACE on top it's over 80 cm tall, and together they weigh almost 30 kg.\u003c\/li\u003e\n\u003cli\u003eAnyone who only prints small, single-colour PLA parts.\u003c\/li\u003e\n\u003cli\u003eHighly detailed miniatures: that's where \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printing\u003c\/a\u003e wins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it print ABS, ASA, PC and nylon?\u003c\/h4\u003e\n\u003cp\u003eYes. It's enclosed, the bed reaches 120 °C, the nozzle 350 °C and the chamber heats up to 65 °C. Anycubic recommends it for ABS, ASA, PC and PA, including fibre-filled versions.\u003c\/p\u003e\n\u003ch4\u003eHow many colours can it print?\u003c\/h4\u003e\n\u003cp\u003eFour with the ACE 2 Pro in the box. With two ACE 2 Pro units it reaches 8, and with four, 16.\u003c\/p\u003e\n\u003ch4\u003eDoes the first-generation ACE Pro work?\u003c\/h4\u003e\n\u003cp\u003eNo. It's only compatible with the ACE 2 Pro, and ACE Pro and ACE 2 Pro units can't be mixed.\u003c\/p\u003e\n\u003ch4\u003eCan I use filament from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes. Anycubic says compatible materials work regardless of brand, adjusting temperature and flow. You only lose RFID reading: material and colour are entered manually.\u003c\/p\u003e\n\u003ch4\u003eIs it noisy?\u003c\/h4\u003e\n\u003cp\u003eAnycubic doesn't give a noise figure for the S1 Max. It runs a noise cancellation calibration on first start-up, but it's a large machine with fans and a heater. I wouldn't put it in a bedroom.\u003c\/p\u003e\n\u003ch4\u003eDoes it need assembly?\u003c\/h4\u003e\n\u003cp\u003eVery little: remove the transport locks, place the ACE 2 Pro on top with its cable and tubes, fit the detection module at the back and insert the activated carbon. Then the setup wizard calibrates and levels automatically.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for beginners?\u003c\/h4\u003e\n\u003cp\u003eYou can start with it, as it calibrates itself. But it's large and has a lot of features. If you don't need the size, a smaller one will be less work.\u003c\/p\u003e\n\u003ch4\u003eCan I print without the ACE 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. It comes with a spool holder that screws onto the back so you can print from a single spool.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":55537508942161,"sku":"KSMCBK0A-O","price":783.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-kobra-s1-max-combo-ace-2-pro.jpg?v=1793276673"},{"product_id":"anycubic-kobra-x","title":"Anycubic Kobra X - Multicolor FDM 3D Printer with 4 Colours as Standard, ACE GEN2 Print Head, 260 mm and Expandable to 19 Colours","description":"\u003ch2\u003eAnycubic Kobra X: 4-colour FDM 3D printer out of the box with ACE GEN2 print head\u003c\/h2\u003e\n\u003cp\u003eThe Anycubic Kobra X is an open, bed-slinger FDM 3D printer that prints in 4 colours out of the box with no external unit: the four spools sit on a holder on top of the machine, and colour changes are handled by the ACE GEN2 print head itself. It prints up to 260 × 260 × 260 mm, with a hardened steel nozzle up to 300 °C and a bed up to 100 °C. It's a great entry point into multicolour printing with PLA, PETG, TPU and PVA, and it can be expanded up to 19 colours with ACE 2 Pro.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticolour out of the box:\u003c\/strong\u003e 4 colours or materials in the same part, with no separate filament unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e up to 19 colours with 4 ACE 2 Pro units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 260 × 260 × 260 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 300 mm\/s recommended and 600 mm\/s maximum, according to Anycubic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling:\u003c\/strong\u003e automatic 49-point levelling with strain gauge (LeviQ 3.0).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.4 mm quick-swap hardened steel; 0.25, 0.6 and 0.8 mm optional.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera:\u003c\/strong\u003e 720p with AI detection of spaghetti and foreign objects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRFID:\u003c\/strong\u003e reader in the bottom-left corner for chipped Anycubic spools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e around 45 dB in silent mode, according to Anycubic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is the Kobra X?\u003c\/h3\u003e\n\u003cp\u003eIt's a bed slinger (print head on X, bed on Y) with a different kind of print head. Instead of an external unit pushing the filament, the ACE GEN2 print head has four inputs and one output, a cutter and an extruder that switches from one filament to another. The four spools sit on two holders above the gantry, and each one feeds into the print head through its own PTFE tube.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the \u003cstrong\u003eKobra X on its own\u003c\/strong\u003e: 4 colours, no ACE 2 Pro. Anycubic sells the Kobra X Combo separately, which adds an ACE 2 Pro.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to print in colour at home without a big unit sitting next to the printer: figures, keyrings, signs, parts with logos or toys. It's also good for combining rigid and flexible materials, such as PLA with TPU, or PLA with water-soluble PVA supports. If you're coming from a single-colour printer and want to try multicolour without any hassle, it's one of the most straightforward options.\u003c\/p\u003e\n\n\u003ch3\u003eThe technology, without the hype\u003c\/h3\u003e\n\u003ch4\u003eOpen bed slinger\u003c\/h4\u003e\n\u003cp\u003eIt's neither CoreXY nor enclosed. The bed moves back and forth, so you need free depth: with the bed and spool holder, Anycubic quotes a maximum footprint of 455.4 × 635 × 685.1 mm. The spool holder moves slightly while printing; Anycubic explains that it's designed this way to absorb vibrations.\u003c\/p\u003e\n\u003ch4\u003eReal-world speed\u003c\/h4\u003e\n\u003cp\u003eAnycubic advertises 600 mm\/s and 20,000 mm\/s² acceleration, but recommends 300 mm\/s and 10,000 mm\/s². Out of the factory, acceleration is limited to 10,000 mm\/s² for stable printing, and Anycubic warns that raising it increases the risk of layer shifts and artefacts. Treat the maximum as a spec-sheet figure.\u003c\/p\u003e\n\u003ch4\u003eColour changes and purging\u003c\/h4\u003e\n\u003cp\u003eAccording to Anycubic, the ACE GEN2 changes colour twice as fast and reduces waste by 40 to 50 %. It's still a single nozzle: at each change it cuts, retracts, loads the new filament and purges the excess into a collector that moves it out of the print area. On parts with many changes per layer, you'll still notice the purge waste and extra time.\u003c\/p\u003e\n\u003ch4\u003eHotend, bed and levelling\u003c\/h4\u003e\n\u003cp\u003eQuick-swap hotend with locking clip, 0.4 mm hardened steel nozzle and up to 300 °C. The bed reaches 100 °C and comes with a flexible steel plate. Before each print it wipes the nozzle on a silicone pad on the bed and levels itself automatically with 49 points.\u003c\/p\u003e\n\u003ch4\u003eMaterials\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle material:\u003c\/strong\u003e PLA, PETG, TPU, PVA and ABS, according to Anycubic's FAQ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombinations:\u003c\/strong\u003e PLA + TPU and PLA + PVA. For multicolour with TPU, it must be 68D or harder. In single colour it supports TPU 95A, but not 85A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASA:\u003c\/strong\u003e since it's an open printer, Anycubic recommends using it with an ACE 2 Pro to keep the filament dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo get started, PLA and PETG: we stock \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/filament-pla-1\"\u003ePLA filament\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/petg-filament\"\u003ePETG\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/flexible-tpu-filament\"\u003eTPU\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eMulticolour: 4 out of the box and up to 19\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 colours:\u003c\/strong\u003e using the four spools on the top holder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith ACE 2 Pro:\u003c\/strong\u003e the ACE feeds into channel 4 of the print head, so with one unit you get 3 + 4 = 7 colours. With four ACE 2 Pro units you reach 19, adding the hubs specified by Anycubic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eACE version:\u003c\/strong\u003e the Kobra X uses the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-s1-x\"\u003eACE 2 Pro for Kobra S1 and Kobra X\u003c\/a\u003e. The first-generation ACE Pro can't be combined with the ACE 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e the Kobra X doesn't dry filament. If you need that, the ACE 2 Pro does it, or check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/filament-dryers\"\u003efilament dryers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRFID:\u003c\/strong\u003e hold an Anycubic spool's tag up to the reader and the screen shows the material and colour. It works with \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-basic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA Basic with RFID\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA+ with RFID\u003c\/a\u003e. With other brands, you set it up manually.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinter base, gantry and build plate.\u003c\/li\u003e\n\u003cli\u003e2 spool holders with 4 shafts, and 4 PTFE tubes.\u003c\/li\u003e\n\u003cli\u003ePurge chute, power cable, trim covers, cover and cable clip.\u003c\/li\u003e\n\u003cli\u003eScrews (8 M5 × 30 and 1 M3 × 8), magnetic Allen keys, grease, nozzle cleaner and filament samples.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo USB stick included. You'll need to mount the gantry onto the base with 8 screws, then fit the purge chute, holders and tubes, following Anycubic's manual and video.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eKobra X\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eFDM, open bed slinger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e260 × 260 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e300 mm\/s recommended, 600 mm\/s maximum (according to Anycubic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcceleration\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s² recommended, 20,000 mm\/s² maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.08-0.28 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eSingle, 0.4 mm hardened steel (0.25 \/ 0.6 \/ 0.8 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatures\u003c\/td\u003e\n\u003ctd\u003eNozzle 300 °C, bed 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulticolour\u003c\/td\u003e\n\u003ctd\u003e4 colours out of the box, up to 19 with 4 ACE 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLevelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic, 49 points, strain gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003e720p, AI detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003e2.4\/5 GHz Wi-Fi with LAN mode, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e1450 W at 220 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e455.4 × 445.3 × 461.3 mm (maximum with bed and holder: 455.4 × 635 × 685.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSoftware and connectivity\u003c\/h3\u003e\n\u003cp\u003eYou slice with Anycubic Slicer Next and control the printer with the Anycubic app: start jobs, view the camera and get notifications. It has dual-band Wi-Fi and LAN mode, so you can print from the slicer without going through the cloud. To find out how much each part costs you, use our \u003ca href=\"https:\/\/mrresin.es\/en\/pages\/3d-filament-cost-calculator\"\u003efilament cost calculator\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/creality-sparkx-i7-color-combo\"\u003eCreality SPARKX i7 Color Combo\u003c\/a\u003e:\u003c\/strong\u003e the closest alternative, also a 4-colour bed slinger, but with the spools in a separate enclosed unit (CFS Lite). On the Kobra X, multicolour is handled in the print head with the spools in plain view, and it can be expanded up to 19 colours with ACE 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/elegoo-centauri-2-combo\"\u003eElegoo Centauri 2 Combo\u003c\/a\u003e:\u003c\/strong\u003e open 256 mm CoreXY with 4 colours (CANVAS). If you want CoreXY, go for that one; if you prefer multicolour in the print head, the Kobra X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-kobra-s1-max-combo\"\u003eAnycubic Kobra S1 Max Combo\u003c\/a\u003e:\u003c\/strong\u003e a different league: enclosed 350 mm CoreXY with a heated chamber, for ABS, PC and nylon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/creality-k1c-2025\"\u003eCreality K1C 2025\u003c\/a\u003e:\u003c\/strong\u003e enclosed single-colour CoreXY. A better choice if ABS or ASA matter more to you than colour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee them all in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/fdm-3d-printers\"\u003eFDM 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSerious ABS, ASA, PC or nylon printing: it's an open printer and its nozzle tops out at 300 °C.\u003c\/li\u003e\n\u003cli\u003eAnyone short on depth: with the moving bed it needs about 64 cm.\u003c\/li\u003e\n\u003cli\u003eHighly detailed miniatures: \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin printing\u003c\/a\u003e is a better fit for that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs it multicolour out of the box, or do I need to buy something else?\u003c\/h4\u003e\n\u003cp\u003eIt's multicolour out of the box: it prints 4 colours using the four spools on the top holder. You only need the ACE 2 Pro to go beyond 4 colours or to dry filament.\u003c\/p\u003e\n\u003ch4\u003eWhat's the maximum number of colours?\u003c\/h4\u003e\n\u003cp\u003e19 with four ACE 2 Pro units. Each ACE takes up channel 4 of the print head, which is why one unit gives you 7 colours, not 8.\u003c\/p\u003e\n\u003ch4\u003eDoes it print ABS or ASA?\u003c\/h4\u003e\n\u003cp\u003eAnycubic lists ABS and ASA, but it's an open printer. Small parts may work; with large parts, warping is likely. For those materials, an enclosed printer is a better choice.\u003c\/p\u003e\n\u003ch4\u003eCan I use filament from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes. You just lose RFID reading and need to enter the material and colour on the screen. Cut the tip at an angle before loading it.\u003c\/p\u003e\n\u003ch4\u003eIs it noisy?\u003c\/h4\u003e\n\u003cp\u003eIn silent mode, around 45 dB according to Anycubic. With PETG you may hear a slight rubbing in the upper channel, which according to the brand doesn't affect the print.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for beginners?\u003c\/h4\u003e\n\u003cp\u003eYes. It levels and calibrates itself on first start-up, and multicolour doesn't require a separate unit. Assembly is simple, but you do have to do it.\u003c\/p\u003e\n\u003ch4\u003eCan it print long jobs non-stop?\u003c\/h4\u003e\n\u003cp\u003eAnycubic states that it can run for up to 72 hours continuously.\u003c\/p\u003e\n\u003ch4\u003eDoes it print TPU?\u003c\/h4\u003e\n\u003cp\u003eYes, TPU 95A in single colour, and TPU 68D or harder combined with PLA or PETG. Softer TPU, such as 85A, isn't supported.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":55537509564753,"sku":"KBX0WH0A-O","price":273.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-kobra-x-impresora-3d-4-colores.jpg?v=1793276680"},{"product_id":"anycubic-ace-2-pro-kobra-3-4","title":"Anycubic ACE 2 Pro Kobra 3 \/ Kobra 4 Version - Multicolor System and Filament Dryer for Kobra 3, 3 V2, 3 Max and Kobra 4","description":"\u003ch2\u003eAnycubic ACE 2 Pro for Kobra 3 and Kobra 4: multicolour system and filament dryer\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the ACE 2 Pro version for Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra 3 Max V2 and Kobra 4.\u003c\/strong\u003e It is not the one you need for Kobra S1, Kobra S1 Max or Kobra X. The ACE 2 Pro is an enclosed 4-spool box that feeds the printer so you can print in 4 colours. It dries filament at up to 65 °C while printing and uses RFID to recognise chipped Anycubic spools.\u003c\/p\u003e\n\n\u003ch3\u003eWhich printers each version works with\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter\u003c\/th\u003e\n\u003cth\u003eACE 2 Pro version\u003c\/th\u003e\n\u003cth\u003eRequired firmware\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 3 \/ Kobra 3 Combo\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra 3 \/ Kobra 4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV2.4.6.4 or later (OTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 3 V2 \/ Combo\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra 3 \/ Kobra 4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV1.1.2.5 or later (OTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 3 Max \/ Combo\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra 3 \/ Kobra 4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV2.5.2.5 or later (OTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 3 Max V2\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra 3 \/ Kobra 4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKeep your firmware up to date (OTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 4 \/ Kobra 4 Combo\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra 3 \/ Kobra 4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKeep your firmware up to date (OTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra S1 \/ Kobra S1 Combo\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-s1-x\"\u003eKobra S1 \/ Kobra X version\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eV2.7.0.7 or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra S1 Max \/ Combo\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-s1-x\"\u003eKobra S1 \/ Kobra X version\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFactory firmware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra X \/ Kobra X Combo\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-s1-x\"\u003eKobra S1 \/ Kobra X version\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFactory firmware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 2 and earlier\u003c\/td\u003e\n\u003ctd\u003eNot compatible\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat differs between the two versions\u003c\/h3\u003e\n\u003cp\u003eThe ACE 2 Pro unit itself is the same. The difference is the mounting kit in the box, because each printer family takes in filament differently:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra 3 \/ Kobra 4 version (this one):\u003c\/strong\u003e 4-in-1 hub, purge assembly for the Kobra 3 Max series and M3 screws. The ACE sits to the left of the printer, 10-15 cm away, and the 4 tubes feed in from the top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra S1 \/ Kobra X version:\u003c\/strong\u003e runout and clog detection module with 4-in-1 hub, an adapter plate to mount it behind the printer and M2.5 screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you order the wrong version, you won't have the parts you need to install it. Check the table before you buy and, if you're unsure, message us with your exact printer model.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 slots\u003c\/strong\u003e, each with its own loading and unloading motor, running at 50 mm\/s according to Anycubic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive drying up to 65 °C\u003c\/strong\u003e, with a temperature and humidity sensor, sealed chamber and two solenoid valves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRFID:\u003c\/strong\u003e two readers that recognise the colour and material of Anycubic spools and estimate how much filament is left.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic spool switching\u003c\/strong\u003e when one runs out, if you have an identical spool loaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTangle and clog detection\u003c\/strong\u003e on all four external buffers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChainable:\u003c\/strong\u003e on the Kobra 3 series, up to 2 units (8 colours).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e 48 dB or less, according to Anycubic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003ePut in the spools, insert the filament tip into its inlet and the ACE loads it automatically. The printer has a single nozzle: when it changes colour, it retracts one filament back to the ACE, loads the next one and purges. The more colour changes per layer, the longer the print and the more purge waste. The inlets are made of alumina ceramic so the filament doesn't wear them down.\u003c\/p\u003e\n\u003cp\u003eWith chipped Anycubic spools, such as \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-basic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA Basic with RFID\u003c\/a\u003e or \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA+ with RFID\u003c\/a\u003e, the colour and material appear on the screen automatically. With other brands, a \"?\" appears and you set them manually.\u003c\/p\u003e\n\n\u003ch3\u003eFilament drying\u003c\/h3\u003e\n\u003cp\u003eIt dries at 35 to 65 °C for 2 to 24 hours, with three modes: dry while printing, dry before printing or drying only. Important: \u003cstrong\u003eit doesn't dry when disconnected\u003c\/strong\u003e. It must be connected to the printer via the signal cable, with the printer switched on. If you're looking for a standalone dryer, take a look at our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/filament-dryers\"\u003efilament dryers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSupported filaments\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 1 kg spools: 195-200 mm diameter, 60-68 mm width and 3-6 mm wall.\u003c\/li\u003e\n\u003cli\u003eAnycubic doesn't recommend using cardboard spools as they are and suggests printing adapter rings for them.\u003c\/li\u003e\n\u003cli\u003eAvoid very soft filaments (TPU 85A or softer, damp PVA), very brittle ones or those with highly abrasive fibres: Anycubic warns that they can snap or wear down the feed path.\u003c\/li\u003e\n\u003cli\u003eFor the Kobra 3 series, Anycubic lists PLA, PETG and TPU as the printer's materials. You'll find \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/filament-pla-1\"\u003ePLA\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/petg-filament\"\u003ePETG\u003c\/a\u003e in our shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eACE 2 Pro unit and power cable (built-in power supply, no external adapter).\u003c\/li\u003e\n\u003cli\u003eSignal cables and 4 PTFE tubes.\u003c\/li\u003e\n\u003cli\u003e4 cable organisers and 4-in-1 hub.\u003c\/li\u003e\n\u003cli\u003ePurge assembly for the Kobra 3 Max series and 2 M3 × 7 screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eACE 2 Pro\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlots\u003c\/td\u003e\n\u003ctd\u003e4 × 1 kg spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e35-65 °C, 2-24 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoading and unloading speed\u003c\/td\u003e\n\u003ctd\u003e50 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRFID\u003c\/td\u003e\n\u003ctd\u003e2 readers for Anycubic spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e235 W \/ 300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e368 × 291.5 × 236.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you have a Kobra S1, S1 Max or Kobra X, you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-s1-x\"\u003eACE 2 Pro for Kobra S1 and Kobra X\u003c\/a\u003e. The ACE 2 Pro only works with Anycubic printers. Systems from other brands, such as the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/creality-cfs-lite\"\u003eCreality CFS Lite\u003c\/a\u003e, only work with their own printers. If you don't have a printer yet, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-kobra-x\"\u003eKobra X\u003c\/a\u003e already prints in 4 colours without an external box. See more options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/fdm-3d-printers\"\u003eFDM 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a first-generation ACE Pro who wants to use both: they can't be combined.\u003c\/li\u003e\n\u003cli\u003eAnyone who just wants to dry filament without an Anycubic printer: it doesn't work on its own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWill it work with my Kobra S1 or Kobra X?\u003c\/h4\u003e\n\u003cp\u003eNo. For the Kobra S1, S1 Max and Kobra X there is the Kobra S1 \/ Kobra X version, which comes with a different mounting kit.\u003c\/p\u003e\n\u003ch4\u003eHow many colours can I use with a Kobra 3?\u003c\/h4\u003e\n\u003cp\u003e4 with one ACE 2 Pro and 8 with two, which is the maximum for the Kobra 3 series.\u003c\/p\u003e\n\u003ch4\u003eCan I use it together with my old ACE Pro?\u003c\/h4\u003e\n\u003cp\u003eNo. The ACE Pro and ACE 2 Pro can't work at the same time.\u003c\/p\u003e\n\u003ch4\u003eDoes it dry filament while printing?\u003c\/h4\u003e\n\u003cp\u003eYes, at up to 65 °C. You can also dry before printing or just dry, always with the printer switched on and connected.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with filament from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes, on standard 1 kg plastic spools. You only lose RFID recognition.\u003c\/p\u003e\n\u003ch4\u003eDo I need to update my printer?\u003c\/h4\u003e\n\u003cp\u003eOn the Kobra 3, Kobra 3 V2 and Kobra 3 Max, yes: Anycubic requires the firmware listed in the table, which you install via OTA directly from the printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a separate power supply?\u003c\/h4\u003e\n\u003cp\u003eNo. The power supply is built in; it only needs the power cable and the signal cable.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":55537510285649,"sku":"DS20BK1A-O","price":244.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-ace-2-pro-sistema-multicolor-4-bobinas.jpg?v=1793276689"},{"product_id":"anycubic-ace-2-pro-kobra-s1-x","title":"Anycubic ACE 2 Pro Kobra S1 \/ Kobra X Version - Multicolor System and Filament Dryer for Kobra S1, S1 Max and Kobra X","description":"\u003ch2\u003eAnycubic ACE 2 Pro for Kobra S1 and Kobra X: multicolour system and filament dryer\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the ACE 2 Pro version for the Kobra S1, Kobra S1 Max and Kobra X.\u003c\/strong\u003e It is not the one you need for the Kobra 3 or Kobra 4. The ACE 2 Pro is an enclosed 4-spool unit that feeds your printer for multicolour printing, dries filament at up to 65 °C while printing and recognises RFID-chipped Anycubic spools. Use it to add or expand colours on these three printers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich printers each version works with\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter\u003c\/th\u003e\n\u003cth\u003eACE 2 Pro version\u003c\/th\u003e\n\u003cth\u003eRequired firmware\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra S1 \/ Kobra S1 Combo\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra S1 \/ Kobra X\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eV2.7.0.7 or later (OTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra S1 Max \/ Combo\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra S1 \/ Kobra X\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOut of the box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra X \/ Kobra X Combo\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis one: Kobra S1 \/ Kobra X\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOut of the box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 3 \/ Kobra 3 V2 \/ Kobra 3 Max\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-3-4\"\u003eKobra 3 \/ Kobra 4 version\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSee that version's product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 3 Max V2\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-3-4\"\u003eKobra 3 \/ Kobra 4 version\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSee that version's product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 4 \/ Kobra 4 Combo\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-3-4\"\u003eKobra 3 \/ Kobra 4 version\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSee that version's product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKobra 2 and earlier\u003c\/td\u003e\n\u003ctd\u003eNot compatible\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's different between the two versions\u003c\/h3\u003e\n\u003cp\u003eThe ACE 2 Pro unit itself is the same. What changes is the mounting kit in the box, because each printer family takes in filament differently:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra S1 \/ Kobra X version (this one):\u003c\/strong\u003e runout and clog detection module with 4-in-1 hub, adapter plate for mounting it on the back of the printer, and M2.5 screws. On the S1 and S1 Max the ACE sits on top; on the Kobra X, to the right.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra 3 \/ Kobra 4 version:\u003c\/strong\u003e 4-in-1 hub, purge assembly for the Kobra 3 Max series, and M3 screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you order the wrong version, you'll be missing parts to install it. Check the table before you buy and, if in doubt, message us with the exact model of your printer.\u003c\/p\u003e\n\n\u003ch3\u003eHow many colours you get\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra S1 Max:\u003c\/strong\u003e 4 per ACE 2 Pro, up to 4 units and 16 colours, adding the 8-input and 2-in-1 modules specified by Anycubic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra X:\u003c\/strong\u003e the ACE feeds into channel 4 of the toolhead. With one ACE you get 3 + 4 = 7 colours, and with four, 19.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra S1:\u003c\/strong\u003e with one ACE 2 Pro, 4 colours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 slots\u003c\/strong\u003e, each with its own loading and unloading motor, at 50 mm\/s according to Anycubic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive drying up to 65 °C\u003c\/strong\u003e, with temperature and humidity sensor, sealed chamber and two solenoid valves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRFID:\u003c\/strong\u003e two readers that recognise the colour and material of Anycubic spools and calculate how much is left.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic spool switching\u003c\/strong\u003e when one runs out, if you have an identical one loaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTangle and clog detection\u003c\/strong\u003e on all four external buffers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e 48 dB or less, according to Anycubic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003ePut the spools in and the filament tip into its inlet, and the ACE loads it automatically. The printer has a single nozzle: when changing colour, it retracts one filament back to the ACE, loads the next and purges. The more changes per layer, the more time and purge waste. The inlets are made of alumina ceramic so the filament doesn't wear them down.\u003c\/p\u003e\n\u003cp\u003eWith chipped Anycubic spools, such as \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-basic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA Basic with RFID\u003c\/a\u003e or \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-pla-filament-with-rfid-detection\"\u003eAnycubic PLA+ with RFID\u003c\/a\u003e, the colour and material appear on screen automatically. With other brands, a \"?\" appears and you set it manually.\u003c\/p\u003e\n\n\u003ch3\u003eFilament drying\u003c\/h3\u003e\n\u003cp\u003eIt dries at 35 to 65 °C, for 2 to 24 hours, with three modes: dry while printing, dry before printing or dry only. On the Kobra X, which is an open-frame printer, Anycubic recommends it for ASA. Important: \u003cstrong\u003eit does not dry when disconnected\u003c\/strong\u003e. It must be connected to the printer via the signal cable with the printer switched on. If you're looking for a standalone dryer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/filament-dryers\"\u003efilament dryers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSupported filaments\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 1 kg spools: 195-200 mm diameter, 60-68 mm width and 3-6 mm wall.\u003c\/li\u003e\n\u003cli\u003eAnycubic doesn't recommend using cardboard spools as they are. It suggests printing adapter rings.\u003c\/li\u003e\n\u003cli\u003eAvoid very soft filaments (TPU 85A or softer, damp PVA), very brittle ones or highly abrasive fibre-filled ones: Anycubic warns that they can snap or wear down the feed path.\u003c\/li\u003e\n\u003cli\u003eEngineering filaments such as ABS, ASA or PC make sense on the S1 and S1 Max, which are enclosed. Browse our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/technical-filaments\"\u003eengineering filaments\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eACE 2 Pro unit and power cable (built-in power supply, no external adapter).\u003c\/li\u003e\n\u003cli\u003eSignal cables and 4 PTFE tubes.\u003c\/li\u003e\n\u003cli\u003eRunout and clog detection module with 4-in-1 hub.\u003c\/li\u003e\n\u003cli\u003eMounting adapter plate, 4 cable organisers and screws (2 M2.5 × 6 and 2 M2.5 × 25).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eACE 2 Pro\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlots\u003c\/td\u003e\n\u003ctd\u003e4 × 1 kg spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e35-65 °C, 2-24 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoading and unloading speed\u003c\/td\u003e\n\u003ctd\u003e50 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRFID\u003c\/td\u003e\n\u003ctd\u003e2 readers for Anycubic spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e235 W \/ 300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e368 × 291.5 × 236.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you have a Kobra 3 or Kobra 4, you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-ace-2-pro-kobra-3-4\"\u003eACE 2 Pro for Kobra 3 and Kobra 4\u003c\/a\u003e. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-kobra-s1-max-combo\"\u003eKobra S1 Max Combo\u003c\/a\u003e already includes an ACE 2 Pro, and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/anycubic-kobra-x\"\u003eKobra X\u003c\/a\u003e prints 4 colours without it: this unit is for expanding. The ACE 2 Pro only works with Anycubic printers. Systems from other brands, such as the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/creality-cfs-lite\"\u003eCreality CFS Lite\u003c\/a\u003e, only work with their own printers. More options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/fdm-3d-printers\"\u003eFDM 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a first-generation ACE Pro who wants to use both: they can't be mixed.\u003c\/li\u003e\n\u003cli\u003eAnyone who just wants to dry filament without an Anycubic printer: it doesn't work standalone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWill it work with my Kobra 3 or Kobra 4?\u003c\/h4\u003e\n\u003cp\u003eNo. For the Kobra 3, 3 V2, 3 Max, 3 Max V2 and Kobra 4 there's the Kobra 3 \/ Kobra 4 version, which comes with a different mounting kit.\u003c\/p\u003e\n\u003ch4\u003eWhy does the Kobra X give 7 colours and not 8?\u003c\/h4\u003e\n\u003cp\u003eBecause the ACE uses one of the toolhead's 4 channels. You're left with 3 spools on the printer's holder plus the 4 in the ACE.\u003c\/p\u003e\n\u003ch4\u003eCan I use it together with my old ACE Pro?\u003c\/h4\u003e\n\u003cp\u003eNo. The ACE Pro and ACE 2 Pro don't work at the same time, and the S1 Max doesn't support the ACE Pro.\u003c\/p\u003e\n\u003ch4\u003eDoes it dry filament while printing?\u003c\/h4\u003e\n\u003cp\u003eYes, up to 65 °C. You can also dry before printing or dry only, always with the printer switched on and connected.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with filament from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes, on standard 1 kg plastic spools. You only lose RFID recognition.\u003c\/p\u003e\n\u003ch4\u003eDo I need to update my printer?\u003c\/h4\u003e\n\u003cp\u003eOn the Kobra S1, yes: firmware V2.7.0.7 or later, via OTA. The S1 Max and Kobra X support it out of the box.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a separate power supply?\u003c\/h4\u003e\n\u003cp\u003eNo. The power supply is built in; it only needs the power cable and the signal cable.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":55537510908241,"sku":"DS20BK2A-O","price":244.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-ace-2-pro-sistema-multicolor-4-bobinas_cc487746-ac89-4be0-b311-e42fd95fec98.jpg?v=1793276696"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/collections\/anycubic-kobra-x-impresora-3d-4-colores.jpg?v=1793276752","url":"https:\/\/mrresin.es\/en\/collections\/anycubic-fdm-3d-printers.oembed","provider":"Mr Resin","version":"1.0","type":"link"}