{"title":"HeyGears Resin 3D Printers","description":"\u003cp\u003e\u003cstrong\u003eHeyGears resin 3D printers\u003c\/strong\u003e are the \u003cstrong\u003eUltraCraft Reflex\u003c\/strong\u003e series: LCD printers that level themselves, top up resin on their own and run locked profiles for each \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/heygears-resins\"\u003eUltraPrint resin\u003c\/a\u003e. We sell three: the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThey are not three sizes of the same machine. The RS Turbo works at 405 nm and is built for detail. The other two work at 385 nm and open the door to technical resins. Below you will find the comparison and which one to choose for what you print.\u003c\/p\u003e","products":[{"product_id":"impresora-3d-heygears-ultracraft-reflex-2-pro","title":"HeyGears UltraCraft Reflex 2 Pro - 385 nm Resin 3D Printer 230×144×350 mm","description":"\u003ch2\u003eHeyGears UltraCraft Reflex 2 Pro: 385 nm resin printer for batch production\u003c\/h2\u003e\n\u003cp\u003eThe Reflex 2 Pro is the largest and most professional machine in the HeyGears Reflex range. It's an LCD (MSLA) printer with 385 nm light, a build volume of 230 × 144 × 350 mm and its own lighting system, OptiZone, which splits the light into 1,032 individually controlled zones. HeyGears designed it to take you from prototype to production: batches of identical parts, solid parts, technical resins and plenty of usable height.\u003c\/p\u003e\n\u003cp\u003eThis isn't a beginner's printer. It's built for workshops, orthotics, footwear, tooling and anyone who already prints in resin every day and needs volume, repeatability and engineering resins.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 230 × 144 × 350 mm, 2.3 times that of the original Reflex according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 cm Z height:\u003c\/strong\u003e the manufacturer says you can print full-size orthoses and footwear in one go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e385 nm light (385+ nm)\u003c\/strong\u003e with the OptiZone light engine: 1,032 Mini-LED zones with collimating lenses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.7\" Amber Screen Pro\u003c\/strong\u003e: 10% energy transmission (twice that of a conventional 5% LCD), up to 35 W\/m² and a lifespan of over 6,000 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 μm native XY pixel\u003c\/strong\u003e, ±20 μm accuracy and layers from 20 to 250 μm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC5 Z axis with closed-loop FOC motor\u003c\/strong\u003e: ±2 μm repeatability under an 80 kg load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated scraper\u003c\/strong\u003e: brings the resin from 10 to 22 °C in 6 minutes and holds it at ±1 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation:\u003c\/strong\u003e resin auto-refill with ultrasonic sensor, 0.15 mm debris detection and self-levelling floating platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e USB, Wi-Fi and Ethernet (RJ-45). Prepare and control jobs with HeyGears Blueprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eThe Reflex 2 Pro makes sense when the printer runs for long hours and volume matters. HeyGears focuses it on batch production: fill the platform with parts, repeat the batch and get identical results. The OptiZone engine matches the illuminated area to the outline of the nested parts, so no resin is exposed in the gaps between models. According to the manufacturer, this improves surface finish and dimensional accuracy and leaves less debris in the vat, so you filter less often.\u003c\/p\u003e\n\u003cp\u003eThe 35 cm of height opens the door to parts you'd have to split on a regular desktop printer: insoles and orthoses, shoe lasts and soles, housings, tooling and moulds. HeyGears says you can also arrange solid parts in an array for batch production, something that causes problems on many LCD printers.\u003c\/p\u003e\n\n\u003ch3\u003eTechnology: screen, light and mechanics\u003c\/h3\u003e\n\u003ch4\u003eOptiZone light engine with 1,032 zones\u003c\/h4\u003e\n\u003cp\u003eThe Reflex 2 Pro uses 1,032 individually controlled LEDs, each with its own collimating lens, plus a double-sided microlens array. According to HeyGears, the light comes out highly collimated and uniform and only switches on where there's a part.\u003c\/p\u003e\n\u003ch4\u003eAmber Screen Pro\u003c\/h4\u003e\n\u003cp\u003eThe screen transmits 10% of the energy, twice as much as a conventional LCD, and supports curing intensities of up to 35 W\/m². This shortens exposure per layer and lets you work with high-performance resins. HeyGears rates it for over 6,000 printing hours (contrast and transmission within 10% deviation after 6,000 h), equivalent to one year of use at 16 hours a day, with a 1-year warranty. It's reinforced to withstand the pressure of highly viscous resins: 10,000 cycles at 40 kg with no damage.\u003c\/p\u003e\n\u003ch4\u003eMASK light calibration\u003c\/h4\u003e\n\u003cp\u003eThe MASK visual calibration algorithm uses 86,020 zones to compensate for intensity differences across the screen. HeyGears states light uniformity of 94% or higher and print accuracy of 0.05 mm or better (measured on parts up to 20 mm in XY).\u003c\/p\u003e\n\u003ch4\u003eC5 Z axis and FOC motor\u003c\/h4\u003e\n\u003cp\u003eThe FOC motor module works in closed loop with 25,600 microsteps per revolution. Together with the C5 lead screw, it positions with ±2 μm repeatability even under an 80 kg load, and keeps 99.6% of layer thickness errors within ±2 μm at high speed. The base is a single cast piece, more rigid than a multi-part chassis.\u003c\/p\u003e\n\n\u003ch3\u003eAutomation that saves you work\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated scraper:\u003c\/strong\u003e heats and stirs the resin from 10 to 22 °C in 6 minutes and holds it at ±1 °C throughout the print. With viscous resins such as PAU20 at 35 °C, drip time drops by more than 24%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-refill:\u003c\/strong\u003e an ultrasonic sensor measures the level to ±0.5 mm and tops up the vat from the bottle when needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebris detection:\u003c\/strong\u003e 0.01 N force sensors detect 0.15 mm debris in the vat and stop the print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-levelling:\u003c\/strong\u003e the floating platform absorbs unevenness of up to 240 μm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHeyGears Blueprint software\u003c\/h3\u003e\n\u003cp\u003eThe Reflex 2 Pro pairs with \u003cstrong\u003eBlueprint Studio\u003c\/strong\u003e (Windows and macOS) and the Blueprint Go app (Android and iOS). Blueprint handles orientation, layout, support generation, mesh repair and slicing with profiles by material, layer thickness and part type. It updates via OTA and lets you send jobs and monitor the printer from your phone.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: resins and Pulsing Release Module 2\u003c\/h3\u003e\n\u003cp\u003eThis printer works at \u003cstrong\u003e385 nm\u003c\/strong\u003e and is designed for HeyGears \u003cstrong\u003eUltraPrint\u003c\/strong\u003e resins, with profiles already tuned in Blueprint. According to the official compatibility chart, with the Reflex 2 Pro you can use, among others, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pam10-color-1kg\"\u003ePAM10\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe most demanding engineering resins require the \u003cstrong\u003ePulsing Release Module 2\u003c\/strong\u003e: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10 castable\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10 elastic\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20 tooling\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270 high-temperature\u003c\/a\u003e. The module is not included with the printer. You can get it in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit for Reflex 2 and 2 Pro\u003c\/a\u003e (module and vat) or as a \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003estandalone module\u003c\/a\u003e, which always works with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 series Pulsing Release vat\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhat does Pulsing Release do? It inflates and deflates the vat film on every layer to peel the part off with less force. With version 2, HeyGears claims up to 60% fewer supports and up to 54% less contact area. The water-washable PAWW10 and PAWW20 resins are not compatible with the module.\u003c\/p\u003e\n\u003cp\u003eAbout third-party resins: HeyGears offers Open Material mode in Blueprint for the Reflex\/Reflex Turbo and RS\/RS Turbo series, but as of today it hasn't announced it for the Reflex 2 Pro. If you plan to use it with third-party resins, ask us first.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e10.7\" Amber Screen Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eOptiZone, 1,032 Mini-LED zones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative XY pixel\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±20 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e20-250 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ axis\u003c\/td\u003e\n\u003ctd\u003eC5-grade lead screw with closed-loop FOC motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin heating\u003c\/td\u003e\n\u003ctd\u003eHeated scraper, ±1 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLevelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic, absorbs up to 240 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDebris detection\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal interfaces\u003c\/td\u003e\n\u003ctd\u003eGreenPrint purification module, Pulsing Release Module 2, Ethernet RJ-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e430 × 445 × 715 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e29.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface languages\u003c\/td\u003e\n\u003ctd\u003eEnglish and Simplified Chinese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's in the box\u003c\/h4\u003e\n\u003cp\u003ePrinter, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e, resin refill cap, power cable, part removal tool, resin vat, build platform, T-wrench, quick start guide and after-sales service guide.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation, use and post-processing\u003c\/h3\u003e\n\u003cp\u003eIt weighs almost 30 kg: HeyGears recommends two people place it on a flat table. On first start-up, the printer guides you through language, network and pairing with Blueprint Studio using a code. For auto-refill, HeyGears recommends fitting the bottle with the pump included with the printer.\u003c\/p\u003e\n\u003cp\u003eThen comes washing and curing. HeyGears offers the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, and the printer has a connection for the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-sistema-de-purificacion\"\u003eUltraCraft purification system\u003c\/a\u003e. You'll find more options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eReflex 2 series spare parts: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex-2\"\u003estandard vat\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-perforada-reflex-2\"\u003eperforated platform\u003c\/a\u003e, heated scraper and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-reflex-2\"\u003eLCD screen\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one to choose? Reflex 2 Pro, Reflex Turbo or RS Turbo\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex 2 Pro\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex RS Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY pixel\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering resins (PAU20, PAH270, PAE10, PAC10)\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module 2\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin heating\u003c\/td\u003e\n\u003ctd\u003eHeated scraper included\u003c\/td\u003e\n\u003ctd\u003eHeated tray included\u003c\/td\u003e\n\u003ctd\u003eOnly with optional heated vat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e29.7 kg\u003c\/td\u003e\n\u003ctd\u003e25 kg\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you need height, batch production or large solid parts, go for the Reflex 2 Pro. If you want 385 nm technical resins in a more compact format, choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. If you're into miniatures, figures and detailed prototypes, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e is for you. You'll find more models in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eResin beginners or occasional users: it's a lot of machine, and it's big and heavy.\u003c\/li\u003e\n\u003cli\u003eUsing third-party resins: HeyGears hasn't announced Open Material mode for this model.\u003c\/li\u003e\n\u003cli\u003eMiniatures: the 29.7 μm pixel of the RS Turbo gives more detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWhat wavelength does the Reflex 2 Pro use?\u003c\/h4\u003e\n\u003cp\u003e385 nm (385+ nm according to HeyGears). It's designed for HeyGears UltraPrint resins, with profiles already tuned in Blueprint.\u003c\/p\u003e\n\u003ch4\u003eWhat is its build volume?\u003c\/h4\u003e\n\u003cp\u003e230 × 144 × 350 mm. According to HeyGears, 2.3 times the volume of the original Reflex, with 35 cm of usable height.\u003c\/p\u003e\n\u003ch4\u003eIs the Pulsing Release Module included?\u003c\/h4\u003e\n\u003cp\u003eNo. The box includes the printer, heated scraper, standard vat and platform. The Pulsing Release Module 2 is sold separately and is required for PAC10, PAE10, PAU20 and PAH270.\u003c\/p\u003e\n\u003ch4\u003eCan I use resins from other brands?\u003c\/h4\u003e\n\u003cp\u003eHeyGears markets it as compatible with all Reflex series resins. Open Material mode for third-party resins is currently only announced for Reflex\/Reflex Turbo and RS\/RS Turbo. If that's your case, contact us before buying.\u003c\/p\u003e\n\u003ch4\u003eWhat software do I need?\u003c\/h4\u003e\n\u003cp\u003eHeyGears Blueprint Studio for Windows or macOS and, if you like, the Blueprint Go app to monitor your prints from your phone.\u003c\/p\u003e\n\u003ch4\u003eHow long does the screen last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Amber Screen Pro for over 6,000 printing hours, with a 1-year warranty. The screen is modular and can be replaced as a spare part.\u003c\/p\u003e\n\u003ch4\u003eHow is it shipped?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384195826001,"sku":"DIST-6971437942987","price":3522.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-reflex-2-pro-impresora-3d-resina-385nm.jpg?v=1792509483"},{"product_id":"impresora-3d-heygears-ultracraft-reflex-turbo","title":"HeyGears UltraCraft Reflex Turbo - 385 nm Resin 3D Printer 192×121×220 mm","description":"\u003ch2\u003eHeyGears UltraCraft Reflex Turbo: 385 nm resin printer for functional parts\u003c\/h2\u003e\n\u003cp\u003eThe Reflex Turbo is the upgraded version of the HeyGears Reflex. It's an LCD (MSLA) printer with a 385 nm UV light source, a 9.25\" Amber Screen and a build volume of 192 × 121 × 220 mm. Its strength is engineering resins: ABS-like, polycarbonate-like, elastic, clear and castable, with profiles already tuned in the Blueprint software and plenty of automation so your print comes out right the first time.\u003c\/p\u003e\n\u003cp\u003eIt's a great fit for workshops, product design studios, engineering, jewellery and advanced makers who want functional, repeatable parts without spending all day tweaking settings.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e385 nm UV light (385+ nm):\u003c\/strong\u003e HeyGears claims curing that is 1.5 times more powerful than 405 nm printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 192 × 121 × 220 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.25\" Amber Screen:\u003c\/strong\u003e 2.5 times longer lifespan and 22 % more contrast than the previous generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e33 μm native XY pixel\u003c\/strong\u003e and ±16 μm accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC5 ball screw Z axis:\u003c\/strong\u003e positioning errors of 2 μm at most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated vat included:\u003c\/strong\u003e warms the resin from 10 to 22 °C in 20 minutes and keeps it there.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation:\u003c\/strong\u003e resin refilling, residue detection, floating-screen auto-levelling and light-ageing compensation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with the Pulsing Release Module\u003c\/strong\u003e (optional) and with Blueprint's Open Material mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eThe Reflex Turbo is designed for parts that get used, not just looked at: functional prototypes, assembly parts, tooling, gaskets and elastic parts, clear parts and casting models. HeyGears states that 90.6 % of parts show a surface deviation of 0.05 mm or less from the design, with 0.136 mm pillars as the finest detail. The screen is factory-calibrated with light variation within 3 % across the entire platform.\u003c\/p\u003e\n\u003cp\u003eWhat sets it apart from a consumer 405 nm LCD is the combination of 385 nm light and locked, material-specific profiles. This allows HeyGears to offer high-performance resins that either don't cure well on a 405 nm printer or need a lot of tuning.\u003c\/p\u003e\n\n\u003ch3\u003eTechnology: light, screen and mechanics\u003c\/h3\u003e\n\u003ch4\u003e385 nm light source\u003c\/h4\u003e\n\u003cp\u003ePhotopolymer resins react more strongly to shorter wavelengths. The Reflex Turbo works at 385 nm and, according to HeyGears' tests, cures 1.5 times more than most 405 nm resin printers. The manufacturer links this to being able to use ABS-like, polycarbonate-like and rubber-like resins with better final properties.\u003c\/p\u003e\n\u003ch4\u003eAmber Screen\u003c\/h4\u003e\n\u003cp\u003eThe screen uses a polariser dyed with UV-resistant dye molecules. This reduces contrast loss over time and extends screen life 2.5 times compared with the previous generation, with 22 % more contrast. On top of that, the printer tracks light ageing and compensates for it automatically throughout the machine's life.\u003c\/p\u003e\n\u003ch4\u003eC5 Z axis\u003c\/h4\u003e\n\u003cp\u003eThe C5-grade ball screw delivers ±2 μm repeatability. In HeyGears' tests, with a 30 kg load and ten thousand cycles, 96 % of errors stayed below 1 μm and 99.9 % below 2 μm. Less variation between layers means fewer layer lines.\u003c\/p\u003e\n\u003ch4\u003ePrinting algorithms\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Motion Algorithm 3.0:\u003c\/strong\u003e analyses each layer (cross-section, spacing and number of parts) and chooses from 18 sets of motion parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegional exposure:\u003c\/strong\u003e distinguishes supports, outer walls and inner walls and cures them separately. It improves surface hardness and support strength, especially with ABS-like, PVC-like, nylon-like and elastic resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdaptive Z compensation:\u003c\/strong\u003e each material package adjusts Z compensation for up to 180 combinations of angles, holes and edges. Less warping and less resin build-up in supported areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAutomation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidue detection:\u003c\/strong\u003e 0.1 N force sensors detect 0.2 mm residues and stop the print if something fails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-levelling:\u003c\/strong\u003e the floating screen absorbs unevenness of up to 240 μm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin refilling:\u003c\/strong\u003e measures the amount of resin with 5 g accuracy and tops it up before and during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated vat:\u003c\/strong\u003e brings the resin from 10 to 22 °C in 20 minutes and keeps it there for the whole print.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears says it's ready to print in about 10 minutes and that you can learn to use it in under an hour.\u003c\/p\u003e\n\n\u003ch3\u003eHeyGears Blueprint software\u003c\/h3\u003e\n\u003cp\u003eEverything runs through \u003cstrong\u003eBlueprint Studio\u003c\/strong\u003e (Windows and macOS). Blueprint orients, arranges, adds supports and slices, detects and repairs mesh errors (flipped normals, intersecting or missing faces) and warns you about problem areas such as thin walls or enclosed volumes. It applies print strategies based on material, printer, layer height, part requirements and geometry. It also lets you send jobs and check the printer's status from your computer or phone.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: resins, open materials and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eThe Reflex Turbo works at \u003cstrong\u003e385 nm\u003c\/strong\u003e with HeyGears \u003cstrong\u003eUltraPrint\u003c\/strong\u003e resins. According to the official compatibility chart, it can use the full Reflex series range: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-parp10-prototipado-rapido-1kg\"\u003ePARP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pam10-color-1kg\"\u003ePAM10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e and the water-washable \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor engineering resins you need the \u003cstrong\u003ePulsing Release Module\u003c\/strong\u003e: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10 castable\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10 elastic\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20 tooling\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e. The module isn't included with the printer: you'll find it in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex and Reflex Turbo\u003c\/a\u003e, which includes the module and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003ePulsing Release vat\u003c\/a\u003e. The module inflates and deflates the vat film on every layer and reduces peel force by around 50 %. HeyGears cites 25 % fewer supports and up to 20 % more speed with some resins. It isn't recommended for walls of 3 mm or less and isn't compatible with PAWW10 or PAWW20.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThird-party resins:\u003c\/strong\u003e the Reflex Turbo supports Blueprint Studio's \u003cstrong\u003eOpen Material mode\u003c\/strong\u003e. You select \"Open Material\" as the material and adjust exposure, light intensity and dimensional compensation in the process editor. HeyGears intends it for experienced users and for 405 nm photopolymer resins. The hardware warranty remains valid in both modes, according to HeyGears' terms. Results with third-party resins depend on you and on the resin.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e9.25\" Amber Screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative XY pixel\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±16 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e25-150 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ axis\u003c\/td\u003e\n\u003ctd\u003eC5-grade ball screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e400 × 420 × 572 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface languages\u003c\/td\u003e\n\u003ctd\u003eEnglish, Simplified Chinese and Japanese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's in the box\u003c\/h4\u003e\n\u003cp\u003ePrinter, power cable, resin vat, build platform, LCD screen tape, spare film with 2 spare screws, 2 pairs of gloves, 3 Allen keys, part removal tool, 10 scrapers, pliers, simple cleaning box, 5 filter papers, residue remover and multifunction handle.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eThe workflow is simple: you prepare the part in Blueprint, choose the resin and the printer takes care of heating, refilling and levelling. When it's done, wash and cure your parts. HeyGears' stations are the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e; you can also use any of our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing supplies\u003c\/a\u003e. Always follow each resin's guidelines.\u003c\/p\u003e\n\u003cp\u003eCompatible spare parts: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex\"\u003eReflex resin vat\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-de-impresion-reflex\"\u003eReflex build platform\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex\"\u003eReflex Amber LCD screen\u003c\/a\u003e and tempered glass screen protector.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose? Reflex Turbo, Reflex 2 Pro or RS Turbo\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex 2 Pro\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex RS Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY pixel\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering resins (PAU20, PAH270, PAE10, PAC10)\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module 2\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen Material mode\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNot announced\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin heating\u003c\/td\u003e\n\u003ctd\u003eHeated vat included\u003c\/td\u003e\n\u003ctd\u003eHeated scraper included\u003c\/td\u003e\n\u003ctd\u003eOnly with optional heated vat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe Reflex Turbo is the middle ground: 385 nm engineering resins in a desktop format. If you need more height or batch production, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. If you'll mainly print miniatures and figures, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e offers higher resolution and is lighter. More options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you only print miniatures: the RS Turbo has higher resolution and is lighter.\u003c\/li\u003e\n\u003cli\u003eFor very tall parts or large batches of solid parts: the Reflex 2 Pro is the better choice there.\u003c\/li\u003e\n\u003cli\u003eIf you want to tinker with any cheap resin without profiles: Open Material makes it possible, but the machine shines with UltraPrint resins and their profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat wavelength does the Reflex Turbo use?\u003c\/h4\u003e\n\u003cp\u003e385 nm (385+ nm according to HeyGears). According to the manufacturer, it cures 1.5 times more than 405 nm printers, which allows it to use engineering resins.\u003c\/p\u003e\n\u003ch4\u003eHow is it different from the original Reflex?\u003c\/h4\u003e\n\u003cp\u003eThe Turbo features an improved Amber Screen, with 2.5 times longer lifespan and 22 % more contrast, and adds algorithms such as Dynamic Motion Algorithm 3.0, regional exposure and adaptive Z compensation.\u003c\/p\u003e\n\u003ch4\u003eCan I use resins from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes, with Blueprint Studio's Open Material mode, designed for experienced users. You set the exposure and intensity yourself. The hardware warranty remains valid according to HeyGears' terms.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eOnly for PAC10, PAE10, PAU20 and PAH270. With other resins it's optional and helps you use fewer supports. It isn't compatible with the water-washable PAWW10 and PAWW20.\u003c\/p\u003e\n\u003ch4\u003eDoes it have resin heating?\u003c\/h4\u003e\n\u003cp\u003eYes, the heated vat comes as standard. It warms the resin from 10 to 22 °C in 20 minutes and keeps it there.\u003c\/p\u003e\n\u003ch4\u003eWhat software does it use?\u003c\/h4\u003e\n\u003cp\u003eHeyGears Blueprint Studio for Windows and macOS. It prepares your parts, applies resin-specific profiles and lets you monitor prints remotely.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384199758161,"sku":"DIST-6971437942925","price":1704.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-reflex-turbo-impresora-3d-resina-385nm.jpg?v=1792509492"},{"product_id":"impresora-3d-heygears-ultracraft-reflex-rs-turbo","title":"HeyGears UltraCraft Reflex RS Turbo - 8K 405 nm Resin 3D Printer 222×122×228 mm","description":"\u003ch2\u003eHeyGears UltraCraft Reflex RS Turbo: 8K resin printer for miniatures and fine detail\u003c\/h2\u003e\n\u003cp\u003eThe Reflex RS Turbo is HeyGears' printer for anyone after fine detail: miniatures, figures, collectibles, jewellery and small prototypes. It is an LCD (MSLA) printer with a 10.3\" 8K Amber Screen, a 29.7 μm pixel size and a build volume of 222 × 122 × 228 mm. Note one important detail: \u003cstrong\u003eit works at 405 nm\u003c\/strong\u003e, not 385 nm like the Reflex Turbo or the Reflex 2 Pro.\u003c\/p\u003e\n\u003cp\u003eOf the three Reflex models we sell, it is the lightest and the one best suited to users moving up from an entry-level resin printer who want more detail and fewer failed prints, without wasting time tweaking settings.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.3\" 8K Amber Screen\u003c\/strong\u003e with a 566:1 contrast ratio, almost 60% higher than the previous generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver 1 million layers\u003c\/strong\u003e of screen lifespan, according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29.7 μm native XY pixel\u003c\/strong\u003e, ±15 μm accuracy and 30 to 100 μm layers.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e405 nm wavelength.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 222 × 122 × 228 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC5-grade Z axis:\u003c\/strong\u003e positioning errors of 2 μm at most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Motion Algorithm 3.0:\u003c\/strong\u003e up to 33% faster than conventional motion control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Material mode\u003c\/strong\u003e in Blueprint Studio for using resins from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation:\u003c\/strong\u003e floating-screen auto-levelling, automatic resin refilling and residue detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears designs it for tabletop miniatures, figures, busts, collectibles, jewellery prototypes, moulds and detailed parts. With a 29.7 μm pixel and a high-contrast screen, faces, clothing textures and edges come out crisp. In its official store, HeyGears presents it as a professional-grade machine that is easy to use, especially suited to anyone upgrading from an entry-level printer.\u003c\/p\u003e\n\u003cp\u003eIt also works for functional parts with resins such as the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003eABS-like PAU11\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ewear-resistant PAWR10\u003c\/a\u003e. What it can't do is handle HeyGears' most demanding engineering resins; for those, there are the Reflex Turbo and the Reflex 2 Pro.\u003c\/p\u003e\n\n\u003ch3\u003eTechnology: screen, mechanics and speed\u003c\/h3\u003e\n\u003ch4\u003eHigh-contrast Amber Screen\u003c\/h4\u003e\n\u003cp\u003eThe screen combines a polariser dyed with dye molecules and an optical layer that lets light through at 90°. This means less stray light reaches the layer being cured: less overexposure, cleaner edges and residue-free surfaces. The contrast ratio is 566:1, almost 60% higher than the previous generation. The dye molecules withstand UV and heat well, so contrast degrades less over time. HeyGears quotes over 1 million layers and up to twice the lifespan of a conventional LCD.\u003c\/p\u003e\n\u003ch4\u003eScreen calibration\u003c\/h4\u003e\n\u003cp\u003eThe screen is divided into 60 zones and calibrated with a full-screen tool to keep light variation within ±3% and a print tolerance of 0.05 mm or less. If you replace the screen, the printer recalibrates itself using the NFC data from the new screen, with light differences below 5%.\u003c\/p\u003e\n\u003ch4\u003eC5 Z axis and rigid frame\u003c\/h4\u003e\n\u003cp\u003eThe C5-grade Z module ensures positioning errors of 2 μm at most, tested by HeyGears with a 50 kg load over ten thousand cycles. The frame is highly rigid and the screen has its own cooling.\u003c\/p\u003e\n\u003ch4\u003eSpeed\u003c\/h4\u003e\n\u003cp\u003eThe Dynamic Motion Algorithm 3.0 analyses each layer (cross-section, separation and number of parts) and chooses from 18 sets of motion parameters. It splits each layer's movement into seven stages and reads the force sensor 80 times per second to avoid wasting time and prevent failures. HeyGears quotes up to 33% more speed (measured with PAWW10 versus conventional motion control) and an average of 4.5 seconds per layer. Actual speed depends on the model.\u003c\/p\u003e\n\u003ch4\u003eAdaptive Z compensation\u003c\/h4\u003e\n\u003cp\u003eEach material profile adjusts Z compensation for up to 180 combinations of angles, hole sizes and edge types. The result: less warping, less resin build-up in supported areas and less post-processing.\u003c\/p\u003e\n\n\u003ch3\u003eAutomation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidue detection:\u003c\/strong\u003e 0.1 N force sensors detect 0.2 mm residue and stop the print if there is a failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-levelling:\u003c\/strong\u003e the floating screen compensates for unevenness of up to 240 μm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic resin refilling\u003c\/strong\u003e before and during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin heating (optional):\u003c\/strong\u003e with the RS heated vat, the resin goes from 10 to 22 °C in 20 minutes and stays there. This vat is not included with the printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHeyGears Blueprint software\u003c\/h3\u003e\n\u003cp\u003eThe RS Turbo is operated with \u003cstrong\u003eBlueprint Studio\u003c\/strong\u003e (Windows and macOS). HeyGears says pre-processing takes one minute: one-click slicing, automatic mesh repair (inverted normals, holes, intersecting faces) and automatic scaffold-style supports that detach less often. There are pre-tuned profiles for HeyGears resins, including a 30 μm one for miniatures. You can send jobs and monitor print progress from your computer or phone.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: resins, open materials and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eThe RS Turbo works at \u003cstrong\u003e405 nm\u003c\/strong\u003e. HeyGears lists it as compatible with these UltraPrint resins: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-parp10-prototipado-rapido-1kg\"\u003ePARP10\u003c\/a\u003e, PAWR10, PAU11, PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e. To get started, HeyGears recommends PAS10 for everyday use, PAF10 for miniatures with thin parts and PAP10 for highly detailed models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is not compatible\u003c\/strong\u003e with the range's engineering resins: PAT10 clear, PAC10 castable, PAU20, PAH270, PAE10 or PAM10. If you need them, take a look at the Reflex Turbo or the Reflex 2 Pro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThird-party resins:\u003c\/strong\u003e the RS Turbo supports \u003cstrong\u003eOpen Material mode\u003c\/strong\u003e. In Blueprint you select \"Open Material\" and adjust exposure, light intensity (limited to 12-17 W\/m² to protect the machine) and dimensional compensation. HeyGears says that simply adjusting exposure works for most 405 nm UV resins on the market. It is intended for experienced users, and the hardware warranty is maintained under HeyGears' terms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e this is optional. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003ePulsing Release Module kit for RS and RS Turbo\u003c\/a\u003e includes the module and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eheated Pulsing Release RS vat\u003c\/a\u003e. It inflates and deflates the vat film on each layer and reduces peel force by around 50%. With PAS10, HeyGears quotes 20-60% fewer supports and 25-54% fewer contact points. It works with PARP10, PAS10, PAP10, PAWR10, PAF10 and PAU11, not with PAWW10 or PAWW20, and is not recommended for walls of 3 mm or less. The vat can also be used without the module, just to heat the resin.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e10.3\" 8K Amber Screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative XY pixel\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±15 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e30-100 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ axis\u003c\/td\u003e\n\u003ctd\u003eC5 grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e380 × 360 × 584 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e180 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface languages\u003c\/td\u003e\n\u003ctd\u003eEnglish, Simplified Chinese and Japanese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's in the box\u003c\/h4\u003e\n\u003cp\u003ePrinter, power cable, part removal tool, resin vat, build plate, Allen key and scraper. The Pulsing Release Module and the heated vat are sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003ePrepare the model in Blueprint, choose the resin and its profile, and send the job. The printer levels itself, refills resin and monitors for residue on its own. Then wash and cure the parts: HeyGears offers the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, and you'll find more options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e. If you use water-washable resins, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/water-washable-3d-resins\"\u003ewater-washable resins\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRS series spare parts: resin vat, build plate, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex-rs\"\u003eAmber LCD screen\u003c\/a\u003e, screen protector, screen tape and Pulsing Release film.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one to choose? RS Turbo, Reflex Turbo or Reflex 2 Pro\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex RS Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex 2 Pro\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY pixel\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering resins (PAU20, PAH270, PAE10, PAC10)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen Material mode\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNot announced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003ctd\u003e25 kg\u003c\/td\u003e\n\u003ctd\u003e29.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor miniatures, figures and detail, go for the RS Turbo. For 385 nm technical resins (clear, castable, PC-like, elastic, high-temperature), choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e, or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e if you also need extra height and batch production. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone who needs HeyGears engineering resins (PAU20, PAH270, PAE10, PAC10, PAT10): they are not compatible with the RS Turbo.\u003c\/li\u003e\n\u003cli\u003eParts taller than 228 mm or large batches of solid parts.\u003c\/li\u003e\n\u003cli\u003eAnyone who wants to connect the printer via Ethernet cable: the RS Turbo connects via USB and Wi-Fi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs the RS Turbo 385 nm or 405 nm?\u003c\/h4\u003e\n\u003cp\u003e405 nm, according to HeyGears' official spec sheet. The Reflex Turbo and the Reflex 2 Pro are the 385 nm models.\u003c\/p\u003e\n\u003ch4\u003eCan I use resins from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes, with Blueprint Studio's Open Material mode. HeyGears states that, by adjusting exposure, it supports most 405 nm UV resins on the market. It is intended for experienced users.\u003c\/p\u003e\n\u003ch4\u003eWhich HeyGears resins can I use?\u003c\/h4\u003e\n\u003cp\u003ePAS10, PAF10, PAP10, PARP10, PAWR10, PAU11, PAWW10 and PAWW20. Engineering resins such as PAT10, PAC10, PAU20, PAH270 or PAE10 are not compatible.\u003c\/p\u003e\n\u003ch4\u003eIs it good for miniatures?\u003c\/h4\u003e\n\u003cp\u003eThat's its main purpose. It has a 29.7 μm pixel, a 566:1 contrast screen and a pre-tuned 30 μm profile for HeyGears resins.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eOnly if you fit the heated Pulsing Release RS vat, which is sold separately. With it, the resin goes from 10 to 22 °C in 20 minutes.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eIt isn't required for any compatible resin. It helps reduce supports and contact points. It doesn't work with the water-washable PAWW10 and PAWW20 resins.\u003c\/p\u003e\n\u003ch4\u003eIs it hard to use if I'm coming from an Elegoo or an Anycubic?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears recommends it precisely for people upgrading from an entry-level printer: it levels itself, refills resin on its own and Blueprint generates supports automatically.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384200511825,"sku":"DIST-6971437942918","price":1174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-reflex-rs-turbo-impresora-3d-resina-8k.jpg?v=1792509501"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/collections\/heygears-reflex-rs-turbo-impresora-3d-resina-8k.jpg?v=1792585498","url":"https:\/\/mrresin.es\/en\/collections\/heygears-resin-3d-printers.oembed","provider":"Mr Resin","version":"1.0","type":"link"}