{"title":"HeyGears UltraPrint Resins","description":"\u003cp\u003e\u003cstrong\u003eHeyGears UltraPrint resins\u003c\/strong\u003e are the official resins for \u003cstrong\u003eHeyGears Reflex\u003c\/strong\u003e printers. Each one has its profile already tuned in Blueprint, so you pick the resin and the printer sets the exposure. There are standard modelling resins like \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e, high-detail ones like \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e, plus ABS-like, flexible, clear, colour, tooling, high-temperature and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ecastable resin for jewellery\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBefore you order: \u003cstrong\u003ethey are 385 nm resins\u003c\/strong\u003e and only some of them also work on the 405 nm Reflex RS. They are not for LCD printers from other brands. Below you will find the compatibility table by printer and which resin to use for what.\u003c\/p\u003e","products":[{"product_id":"resina-heygears-ultraprint-pas10-estandar-1kg","title":"HeyGears UltraPrint PAS10 - Standard Modeling Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAS10: standard modelling resin for Reflex printers\u003c\/h2\u003e\n\u003cp\u003ePAS10 is the entry-level resin in HeyGears' UltraPrint range: its own technical data sheet presents it as the most affordable option in the family. It has medium viscosity, moderate strength and toughness, and a matte finish where layers aren't visible to the naked eye. It's designed for figures, miniatures and appearance prototypes printed on HeyGears Reflex printers, and you can get it in three colours: white, light purple and black, in a 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003eIf you have a Reflex and want an everyday resin that prints right first time, start here. If you need more impact resistance, heat resistance or transparency, we explain which one to choose further down.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PAS10 is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWorking on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar) and doesn't guarantee results on them. If you don't have a Reflex, this isn't the resin for you: take a look at our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins\"\u003e3D printer resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm tolerance on parts up to 20 mm (±0.08 mm up to 50 mm and ±0.18 mm up to 100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer supports:\u003c\/strong\u003e handles overhangs of up to 25° without supports, according to the technical data sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e matte, with no layer lines visible to the naked eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast curing:\u003c\/strong\u003e 5 minutes without heat in the UltraCraft Cure (light purple) and 10 minutes for black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNotched impact:\u003c\/strong\u003e 32 J\/m for light purple, 27 J\/m for black and 45 J\/m for white (ASTM D256)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat deflection temperature:\u003c\/strong\u003e between 51 and 55 °C at 0.455 MPa, depending on the colour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle in white, light purple or black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2 and 2 Pro) and 405 nm (Reflex RS and RS Turbo), HeyGears printers only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears recommends it for three things: parts where you don't want to see layers, miniatures and mecha parts with lots of curved and flat surfaces, and appearance prototypes that need to fit together precisely. Its ±0.05 mm tolerance also makes it suitable for short runs of identical parts.\u003c\/p\u003e\n\u003cp\u003eIt's a resin for people who print models and figures on their Reflex and want a reliable, affordable material to work with every day. It's not an engineering resin: for parts that will take impacts, heat or loads, there are better options within the same range.\u003c\/p\u003e\n\n\u003ch3\u003eWhich colour should you choose?\u003c\/h3\u003e\n\u003cp\u003eAll three colours share the same name, but HeyGears publishes different data for each one, so they aren't simply the same resin with different pigment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight purple:\u003c\/strong\u003e the reference colour for PAS10, used for the technical data sheet and the user guide. Viscosity of 531 mPa·s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e the stiffest (flexural modulus of 2490 MPa and 85 Shore D) and the one with the highest heat deflection temperature (55 °C), but the lowest work of fracture (2200 J\/m²). More fluid: 250 mPa·s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite:\u003c\/strong\u003e the toughest of the three: 7680 J\/m² work of fracture, 45 J\/m impact and 20 % elongation. Viscosity of 229 mPa·s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. It isn't required, but it reduces peel forces and lets you use thinner supports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic resin refill:\u003c\/strong\u003e not supported, according to HeyGears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that the compatibility table and process packages are being updated; if in doubt, go with what Blueprint Studio shows for your printer. If you're looking for a machine, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty (standard)\u003c\/th\u003e\n\u003cth\u003eLight purple\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003cth\u003eWhite\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ASTM D790)\u003c\/td\u003e\n\u003ctd\u003e79 MPa\u003c\/td\u003e\n\u003ctd\u003e88 MPa\u003c\/td\u003e\n\u003ctd\u003e91 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus (ASTM D790)\u003c\/td\u003e\n\u003ctd\u003e1630 MPa\u003c\/td\u003e\n\u003ctd\u003e2490 MPa\u003c\/td\u003e\n\u003ctd\u003e2460 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture (ISO 20795-1)\u003c\/td\u003e\n\u003ctd\u003e3200 J\/m²\u003c\/td\u003e\n\u003ctd\u003e2200 J\/m²\u003c\/td\u003e\n\u003ctd\u003e7680 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break (ASTM D638)\u003c\/td\u003e\n\u003ctd\u003e16 %\u003c\/td\u003e\n\u003ctd\u003e15 %\u003c\/td\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact (ASTM D256)\u003c\/td\u003e\n\u003ctd\u003e32 J\/m\u003c\/td\u003e\n\u003ctd\u003e27 J\/m\u003c\/td\u003e\n\u003ctd\u003e45 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa (ASTM D648)\u003c\/td\u003e\n\u003ctd\u003e51 °C\u003c\/td\u003e\n\u003ctd\u003e55 °C\u003c\/td\u003e\n\u003ctd\u003e51 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness (Shore D)\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (ASTM D4212)\u003c\/td\u003e\n\u003ctd\u003e531 mPa·s\u003c\/td\u003e\n\u003ctd\u003e250 mPa·s\u003c\/td\u003e\n\u003ctd\u003e229 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eAdditional data for light purple from its technical data sheet: tensile modulus of 1400 MPa, tensile strength of 45 MPa, water absorption of 1.2 %, 200 h UV ageing test passed (equivalent to around 3 years indoors) and damp heat test passed. All data come from the HeyGears laboratory, averaged across tests with a deviation of ±10 %.\u003c\/p\u003e\n\u003ch4\u003eDesign minimums (light purple, standard tank)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall: 0.2 mm (0.18 mm with Pulsing Release tank)\u003c\/li\u003e\n\u003cli\u003eMinimum hole and pillar: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eMinimum gap between parts: 0.25 mm\u003c\/li\u003e\n\u003cli\u003eRelief details: 0.12 mm embossed and 0.24 mm engraved, at 0.4 mm depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the tank so no pigment is left settled at the bottom. Slice in Blueprint Studio, selecting PAS10 and the correct colour, with automatic supports. If you won't be printing within 3 days, filter the resin and pour it back into the bottle; don't leave it in the tank for more than 7 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e HeyGears gives these times using 95 % alcohol:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltraCraft Wash at 180 rpm: 2 minutes pre-wash + 2 minutes fine wash\u003c\/li\u003e\n\u003cli\u003eUltrasonic: 1 + 2 minutes for light purple, 2 + 2 minutes for black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe first wash is done with used alcohol and the second with clean alcohol. Don't leave the part in alcohol for more than 10 minutes in total, as it affects its properties and dimensions. Afterwards, dry it with compressed air or in an oven for 10 minutes (50 °C for light purple, 45 °C for black). You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, fast mode, without heat and in air: 5 minutes for light purple and 10 minutes for black. For white, use the profile Blueprint assigns. HeyGears recommends sending the curing job from Blueprint, which applies a more refined process than manual curing. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and other options are in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSanding and painting:\u003c\/strong\u003e most parts sand well starting with 300-400 grit, moving to 600 and finishing at 1000 if you're going to paint with an airbrush or spray. Dry the part thoroughly before painting. Be careful with some UV paints: they can make the part more brittle, so test first.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAS10 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear chemical-resistant gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eAvoid contact with liquid resin and uncured parts. If it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and see a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: 106 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore tightly closed between 15 and 28 °C, away from sunlight and moisture. Shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one should you choose in the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePAB10: the other standard modelling resin, matte grey, designed for sanding and painting with good adhesion. Higher impact than purple PAS10 (45 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-parp10-prototipado-rapido-1kg\"\u003ePARP10 Orange Clay\u003c\/a\u003e: very fine detail and high-quality surface for figures, jewellery prototypes and moulds.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, tougher and with higher heat resistance (63 °C), for housings, parts and fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e: if you'd rather not work with alcohol, it washes with water in 2 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: transparent, for parts that need to let light through.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf the part will operate above around 50 °C: its heat deflection temperature is 51-55 °C.\u003c\/li\u003e\n\u003cli\u003eIf you need functional parts that withstand impacts and repeated stress: PAU11 is a better choice.\u003c\/li\u003e\n\u003cli\u003eIf you use your Reflex's automatic resin refill: PAS10 doesn't support it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAS10 on an Elegoo, Anycubic or other 405 nm LCD printer?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. Although it works on the Reflex RS, which is 405 nm, it does so with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eIs it 385 or 405 nm?\u003c\/h4\u003e\n\u003cp\u003eBoth, within the Reflex series: HeyGears validates it on the Reflex, Reflex Turbo, Reflex 2 and 2 Pro (385 nm) and on the Reflex RS and RS Turbo (405 nm).\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between white, light purple and black?\u003c\/h4\u003e\n\u003cp\u003eHeyGears publishes different data for each colour. White is the toughest (7680 J\/m² work of fracture), black is the stiffest and hardest (2490 MPa flexural and 85 Shore D) and light purple is the reference colour for the technical data sheet.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to print it?\u003c\/h4\u003e\n\u003cp\u003eNo. With PAS10 it's optional. If you have it, it reduces peel forces and allows thinner supports, but it also prints with the standard tank.\u003c\/p\u003e\n\u003ch4\u003eHow long does it need for post-curing?\u003c\/h4\u003e\n\u003cp\u003eIn the UltraCraft Cure, fast mode and without heat: 5 minutes for light purple and 10 minutes for black. For white, use the profile Blueprint assigns.\u003c\/p\u003e\n\u003ch4\u003eWhat do you wash it with?\u003c\/h4\u003e\n\u003cp\u003eWith 95 % alcohol: 2 minutes pre-wash and 2 minutes fine wash in the UltraCraft Wash. Don't leave it in alcohol for more than 10 minutes in total.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with automatic resin refill?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that PAS10 doesn't support automatic refill.\u003c\/p\u003e\n\u003ch4\u003eCan it be sanded and painted?\u003c\/h4\u003e\n\u003cp\u003eYes. Sand from 300-400 grit up to 1000 if you're going to paint, dry the part thoroughly and test UV paints first, as some can make it more brittle.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"White","offer_id":55384127832401,"sku":"DIST-6971437944103","price":45.99,"currency_code":"EUR","in_stock":true},{"title":"Light purple","offer_id":55384127865169,"sku":"DIST-6971437941669","price":45.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":55384127897937,"sku":"DIST-6971437942468","price":45.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pas10-morado-claro-1kg.jpg?v=1792509441"},{"product_id":"resina-heygears-ultraprint-casting-pac10-calcinable-1kg","title":"HeyGears UltraPrint Casting PAC10 - Castable Wax Resin for Jewelry 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint Casting PAC10: wax-filled castable resin for jewellery (385 nm)\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Casting PAC10 is HeyGears' resin for printing lost-wax casting patterns. It contains 70 to 75 % wax, leaves no more than 0.02 % ash and burns out cleanly inside the flask. The pattern comes off the printer, goes onto the tree, gets invested and is cast in metal just like a wax pattern. HeyGears shows castings in silver, gold and copper. Violet colour, 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you buy: this is a 385 nm resin only for HeyGears UltraCraft Reflex printers and it requires the Pulsing Release Module.\u003c\/strong\u003e It does not work on 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...) or on the Reflex RS \/ RS Turbo. If you have a different printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/burnout-resins\"\u003ecastable resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWax content:\u003c\/strong\u003e 70-75 %.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsh after burnout:\u003c\/strong\u003e 0.01-0.02 % (thermogravimetric analysis, ASTM E1131).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine detail:\u003c\/strong\u003e 0.08 mm engraved and 0.12 mm embossed details. Minimum wall thickness of 0.12 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance:\u003c\/strong\u003e ±0.03 mm on parts up to 20 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurnout schedule published\u003c\/strong\u003e by HeyGears for gypsum-bonded investments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm only. Requires the Pulsing Release Module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears designed it for jewellery and small precision casting parts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight jewellery:\u003c\/strong\u003e rings, earrings and pendants, including openwork or lattice designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetailed parts:\u003c\/strong\u003e stud earrings, setting prongs, textures and engravings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy jewellery:\u003c\/strong\u003e bracelets and solid rings.\u003c\/li\u003e\n\u003cli\u003eSmall lost-wax industrial parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt offers a good balance of toughness and strength for a castable material. That matters for openwork and hollow patterns, which break when removing supports or building the tree if the wax is brittle.\u003c\/p\u003e\n\u003cp\u003eDo you work in dental prosthetics? Dental labs use the same lost-wax technique, but HeyGears does not list PAC10 as a certified dental material. For that, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/dental-resins\"\u003edental resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinters:\u003c\/strong\u003e UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Reflex RS \/ RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e For Reflex and Reflex Turbo, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module Kit Reflex\u003c\/a\u003e. For Reflex 2 and 2 Pro, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module Kit Reflex 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're looking for a printer, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e are compatible.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWax content\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e70-75 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAsh (TGA)\u003c\/td\u003e\n\u003ctd\u003eASTM E1131\u003c\/td\u003e\n\u003ctd\u003e0.01-0.02 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature at 5 % mass loss\u003c\/td\u003e\n\u003ctd\u003eASTM E1131\u003c\/td\u003e\n\u003ctd\u003e274 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e21 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e450 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e30 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e680 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e16 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e13 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e64 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e259 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data with a deviation of ±10 %.\u003c\/p\u003e\n\u003ch4\u003ePattern design rules\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall thickness of 0.12 mm. For 10 × 10 mm walls, HeyGears recommends 0.18-0.2 mm.\u003c\/li\u003e\n\u003cli\u003eMinimum through-hole of 0.3 mm at 2 mm depth.\u003c\/li\u003e\n\u003cli\u003e0.08 mm engraved and 0.12 mm embossed details (at 0.4 mm depth).\u003c\/li\u003e\n\u003cli\u003eMinimum clearance between moving parts: 0.25 mm.\u003c\/li\u003e\n\u003cli\u003eFor hollow parts, drain holes of 1 to 2 mm depending on size.\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm up to 20 mm, ±0.1 mm up to 50 mm and ±0.15 mm up to 100 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003ch4\u003ePrinting\u003c\/h4\u003e\n\u003cp\u003eShake the bottle well before use and stir the resin in the vat. If you won't be printing for 3 days, filter it and pour it back into the bottle. Don't leave it in the vat for more than 7 days, as it absorbs moisture. In jewellery, surface finish is everything: the first time, print with Blueprint's default supports and add plenty of supports on low points and islands.\u003c\/p\u003e\n\u003ch4\u003eWashing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e95 % alcohol or IPA: 1-minute initial wash in used alcohol and a 2-minute rinse in clean alcohol.\u003c\/li\u003e\n\u003cli\u003eIn the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e at 160 rpm, or in an ultrasonic cleaner with the same times.\u003c\/li\u003e\n\u003cli\u003eDry with compressed air or for 10 minutes at 50 °C. Don't exceed 10 minutes in alcohol in total.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePost-curing\u003c\/h4\u003e\n\u003cp\u003eQuick cure, no heat, in air: \u003cstrong\u003e20 minutes at room temperature\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eFinishing before investing\u003c\/h4\u003e\n\u003cp\u003eRemove the supports by hand or with pliers and tweezers. Sand with 300-400 grit, then 600 and 1,000. On thin walls, start at 500-600. Remove the dust with water and wipe with a microfibre cloth and IPA. Your pattern is then ready to mount on the tree.\u003c\/p\u003e\n\n\u003ch3\u003eInvestment and burnout schedule\u003c\/h3\u003e\n\u003cp\u003eHeyGears has tested PAC10 with gypsum-bonded jewellery investments such as Certus Optima and Yihui Castino No.99 and YHR7097. Use the investment manufacturer's mixing ratio. The usual ratio is 38-40 parts water to 100 parts powder.\u003c\/p\u003e\n\u003cp\u003eStandard burnout schedule published by HeyGears for gypsum-bonded investments:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eStage\u003c\/th\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003cth\u003eTime\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlace the flasks in the kiln\u003c\/td\u003e\n\u003ctd\u003eRoom temperature (up to 150 °C)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp\u003c\/td\u003e\n\u003ctd\u003e1.5 °C\/min to 180 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold (dewaxing)\u003c\/td\u003e\n\u003ctd\u003e180 °C\u003c\/td\u003e\n\u003ctd\u003e60 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp\u003c\/td\u003e\n\u003ctd\u003e1.5 °C\/min to 350 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold\u003c\/td\u003e\n\u003ctd\u003e350 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp\u003c\/td\u003e\n\u003ctd\u003e3.6 °C\/min to 780 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold (burnout)\u003c\/td\u003e\n\u003ctd\u003e780 °C\u003c\/td\u003e\n\u003ctd\u003e180 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCool down\u003c\/td\u003e\n\u003ctd\u003e-2.5 °C\/min to casting temperature\u003c\/td\u003e\n\u003ctd\u003e60 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasting window\u003c\/td\u003e\n\u003ctd\u003eMetal casting temperature\u003c\/td\u003e\n\u003ctd\u003eApprox. 60 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDuring the 180 °C hold, the sprue melts and the wax flows out of the pattern, letting air in. During the 780 °C hold, the remaining resin is eliminated from the investment. The flask then cools down to the casting temperature of your chosen metal. HeyGears warns against overheating the flasks when placing them in the kiln, to prevent cracking. For other investments or processes, get in touch with us.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and these hazard statements: H315 (causes skin irritation), H317 (may cause an allergic skin reaction) and H319 (causes serious eye irritation).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses and ensure good ventilation. Avoid contact with liquid resin and with parts that are not fully cured.\u003c\/li\u003e\n\u003cli\u003eFlash point: above 250 °C, according to the safety data sheet. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore between 15 and 28 °C, away from sunlight and moisture. Shelf life of 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it and dispose of it in accordance with local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm printer from another brand, or a Reflex RS \/ RS Turbo.\u003c\/li\u003e\n\u003cli\u003eAnyone without the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003eEnd-use parts: it's a material designed to burn out inside the investment, not to be used as is.\u003c\/li\u003e\n\u003cli\u003eDental crowns or frameworks that require a certified material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAC10 on a 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin only for the UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro. It's also not validated on the Reflex RS.\u003c\/p\u003e\n\u003ch4\u003eIs the Pulsing Release Module required?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears states that PAC10 requires the Pulsing Release Module on all compatible printers.\u003c\/p\u003e\n\u003ch4\u003eHow much ash does it leave?\u003c\/h4\u003e\n\u003cp\u003eBetween 0.01 and 0.02 %, according to HeyGears' thermogravimetric analysis. With a correct burnout schedule, the flask is left clean.\u003c\/p\u003e\n\u003ch4\u003eWhich metals can it be cast in?\u003c\/h4\u003e\n\u003cp\u003eHeyGears presents it for jewellery and precious metals, and shows castings in silver, gold and copper.\u003c\/p\u003e\n\u003ch4\u003eWhich investment should I use?\u003c\/h4\u003e\n\u003cp\u003eGypsum-bonded jewellery investments. HeyGears has tested it with Certus Optima and with Yihui Castino No.99 and YHR7097.\u003c\/p\u003e\n\u003ch4\u003eHow is it post-cured before investing?\u003c\/h4\u003e\n\u003cp\u003e20 minutes of quick curing, without heat, in the UltraCraft Cure. Then sand if needed and remove the dust before mounting it on the tree.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for dental prosthetics?\u003c\/h4\u003e\n\u003cp\u003eHeyGears does not list it as a dental material. For dental use, we recommend dedicated materials.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205328721,"sku":"DIST-6971437941621","price":294.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-calcinable-heygears-pac10-joyeria-1kg.jpg?v=1792509583"},{"product_id":"resina-heygears-ultraprint-pae10-elastica-1kg","title":"HeyGears UltraPrint PAE10 - Silicone-Like Elastic Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAE10: 385 nm silicone-like elastic resin (49 Shore A)\u003c\/h2\u003e\n\u003cp\u003ePAE10 is the elastic resin in HeyGears' Tooling line. It prints soft parts with a silicone-like feel: 49 Shore A hardness and 433 % elongation at break. It stretches, bends and returns to its shape. HeyGears recommends it for prototyping parts that would be made of silicone in production: model accessories, industrial components and anatomical models. 1 kg bottle, translucent colour.\u003c\/p\u003e\n\u003cp\u003eTwo things to know before you order, so there are no surprises:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt's a \u003cstrong\u003e385 nm\u003c\/strong\u003e resin for HeyGears Reflex printers. \u003cstrong\u003eIt does not work on generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt requires the Pulsing Release Module (PRM).\u003c\/strong\u003e Without the PRM installed, HeyGears does not support it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm. Only for Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with Reflex RS or RS Turbo.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 49 Shore A, soft, silicone-like.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at break:\u003c\/strong\u003e 433 %.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy return:\u003c\/strong\u003e 83 %, according to HeyGears. It bounces back and recovers its shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to wash\u003c\/strong\u003e during post-processing, according to the manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle, translucent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003ePrototyping a silicone part usually means making a mould and casting. With PAE10 you print it directly and check shape, feel and fit before ordering the production mould. That's exactly what HeyGears designed it for: prototyping silicone parts.\u003c\/p\u003e\n\u003cp\u003eApplications suggested by the manufacturer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel accessories:\u003c\/strong\u003e tyres, covers, soft parts for figures and scale models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial components:\u003c\/strong\u003e prototypes of seals, bellows, bumpers and grip parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnatomical models:\u003c\/strong\u003e organs and tissues for training or patient education, like the heart HeyGears shows in its photos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis resin is for users who already own a Reflex with the PRM and want to add a soft material to their production. It's not a resin to start with.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eThis is the important part of the page. According to HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible printers:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro. All of them work at 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo, or any printer from another brand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRM required:\u003c\/strong\u003e PAE10 is on the list of resins that must be used with the Pulsing Release Module, together with PAC10, PAU20 and PAH270.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat you need depending on your printer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex or Reflex Turbo:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e, which includes the module and its tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 or Reflex 2 Pro:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e, or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003emodule without tank\u003c\/a\u003e plus the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 Pulsing Release tank\u003c\/a\u003e. The module alone does not work without that tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA design note: HeyGears does not recommend the PRM for models with walls of 3 mm or less. Since PAE10 is always used with the PRM, design with walls thicker than 3 mm.\u003c\/p\u003e\n\u003cp\u003ePrinters: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. Average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003ctd\u003e433 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003ctd\u003e1.4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eASTM D624\u003c\/td\u003e\n\u003ctd\u003e5.8 kN\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e49 Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e2,420 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat test\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e translucent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy return:\u003c\/strong\u003e 83 % (figure from the official HeyGears store).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 114 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eExposure and curing parameters are included in the HeyGears Blueprint process packages, not in the technical data sheet. With the PRM installed, you select PAE10 in Blueprint and the printer applies the profile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh viscosity:\u003c\/strong\u003e 2,420 mPa·s, much thicker than a standard resin. Shake the bottle well and work with the resin warm. On the Reflex 2, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e helps with thick resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e HeyGears highlights that it washes easily. Use the solvent specified in the process package. Accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e or a \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure\u003c\/a\u003e station. Follow the Blueprint times: an under-cured elastic part stays tacky and an over-cured one loses elasticity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e remove them carefully. With a soft material, it's best to cut them rather than pull them off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNitrile gloves, goggles and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat. Liquid resin must not go down the drain: cure it and dispose of it according to local regulations. Any anatomical models you print are for demonstration only: HeyGears does not present it as a medical material or for body contact.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAE10\u003c\/strong\u003e: soft, silicone-like parts that stretch and recover. Requires PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e: PVC-like flexible (75 Shore D). Harder; it gives but doesn't stretch like rubber. Doesn't need PRM and also works on the RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e: the other Tooling resin, rigid and polycarbonate-like, for tooling and load-bearing parts. Also with PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: rigid parts subject to friction, no PRM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore soft resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/flexible-3d-resins\"\u003eflexible resins\u003c\/a\u003e and technical ones in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone without the Pulsing Release Module. You can't print it without one.\u003c\/li\u003e\n\u003cli\u003eThe Reflex RS and RS Turbo: it is not validated on those machines.\u003c\/li\u003e\n\u003cli\u003e405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003eThin parts with walls under 3 mm.\u003c\/li\u003e\n\u003cli\u003eMedical devices or products in contact with skin or food: it has no certification for that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I print PAE10 without the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears includes it on the list of resins that must be used with the PRM. On the Reflex and Reflex Turbo you need the Reflex PRM kit; on the Reflex 2 and 2 Pro, the PRM 2 with its Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex RS or RS Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears only lists it as compatible with the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eWhat about an Elegoo, Anycubic or Phrozen?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin for the Reflex series with closed parameters in Blueprint. We don't sell it for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it the same as silicone?\u003c\/h4\u003e\n\u003cp\u003eIt has a similar feel and behaviour, with 49 Shore A and 433 % elongation, and HeyGears describes it as silicone-like. It's a photopolymer resin, not silicone: it's meant for prototyping silicone parts, not for replacing silicone in every application.\u003c\/p\u003e\n\u003ch4\u003eWhy are walls under 3 mm not recommended?\u003c\/h4\u003e\n\u003cp\u003eIt's a limitation of the Pulsing Release Module: HeyGears doesn't recommend it for models with walls of 3 mm or thinner. Since PAE10 is always printed with the PRM, the rule always applies.\u003c\/p\u003e\n\u003ch4\u003eIs it transparent?\u003c\/h4\u003e\n\u003cp\u003eIt's translucent, not transparent. It lets some light through, but you can't see clearly through it.\u003c\/p\u003e\n\u003ch4\u003eWhere can I find the curing times?\u003c\/h4\u003e\n\u003cp\u003eIn the PAE10 process package in HeyGears Blueprint. HeyGears doesn't publish them in the technical data sheet.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205459793,"sku":"DIST-6971437941751","price":128.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pae10-elastica-translucida-1kg.jpg?v=1792509586"},{"product_id":"resina-heygears-ultraprint-pau20-utillaje-1kg","title":"HeyGears UltraPrint PAU20 - Polycarbonate-Like Tooling Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAU20: 385 nm polycarbonate-like tooling resin\u003c\/h2\u003e\n\u003cp\u003ePAU20 is the general-purpose resin in HeyGears' Tooling line. It's black, rigid and load-bearing: 69 MPa tensile strength and 109 MPa flexural strength. HeyGears compares it to polycarbonate and recommends it for structural parts, tooling and end-use jigs. It prints with ±0.04 mm tolerances and a smooth surface finish. 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003eTwo important notes before you order:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a \u003cstrong\u003e385 nm\u003c\/strong\u003e resin for the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro only. \u003cstrong\u003eIt does not work on generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...) or on the Reflex RS or RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe Pulsing Release Module (PRM) is mandatory.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm. Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro only.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolycarbonate-like:\u003c\/strong\u003e high strength and toughness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 109 MPa. \u003cstrong\u003eTensile strength:\u003c\/strong\u003e 69 MPa.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork of fracture:\u003c\/strong\u003e 5,400 J\/m², with 23 % elongation at break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting tolerance:\u003c\/strong\u003e ±0.04 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear-resistant\u003c\/strong\u003e with a smooth surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle, black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003ePrinted tooling has to stand up to daily use: clamping, holding, positioning, taking knocks and friction. A modelling resin will crack or deform. PAU20 is designed for exactly that, combining the rigidity of an engineering resin with enough toughness not to snap at the first load.\u003c\/p\u003e\n\u003cp\u003eApplications suggested by HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooling and jigs:\u003c\/strong\u003e assembly fixtures, positioning and drilling jigs, gauges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixings:\u003c\/strong\u003e brackets, flanges, clamps and holders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd-use structural components:\u003c\/strong\u003e mechanical parts that work under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt's a resin for workshops, engineering, maintenance and production teams that already work with a Reflex and the PRM and need parts that actually perform, not just look good.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible printers:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro. All of them work at 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo (405 nm), or printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRM required:\u003c\/strong\u003e PAU20 is on the list of resins that must be used with the Pulsing Release Module, along with PAC10, PAE10 and PAH270.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat you need depending on your printer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex or Reflex Turbo:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e, including the module and its tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 or Reflex 2 Pro:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e, or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003emodule without tank\u003c\/a\u003e plus the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 Pulsing Release tank\u003c\/a\u003e. The module alone won't work without that tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBear in mind that HeyGears does not recommend the PRM for models with walls of 3 mm or less. Since PAU20 always runs with the PRM, design your tools with walls thicker than 3 mm.\u003c\/p\u003e\n\u003cp\u003ePrinters: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. Average laboratory values with a ±10 % deviation.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e35 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e23 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e5,400 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e2,290 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e2,300 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e69 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e109 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e84 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e3,400 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e200 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat test\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e HeyGears equates the 200 h of UV exposure to around 3 years indoors, with less than 30 % loss of properties, no noticeable colour change and a deviation of ±0.1 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 116 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eExposure and curing parameters are included in the HeyGears Blueprint process packages, not in the technical data sheet. With the PRM fitted, you select PAU20 in Blueprint and the Reflex applies the profile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick resin:\u003c\/strong\u003e 3,400 mPa·s, well above a standard resin. Shake it thoroughly and work with it warm. On the Reflex 2, HeyGears tested its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e with PAU20 at 50 μm: heating it from 25 to 35 °C cut dripping time by more than 24 % on parts with a cross-section over 40 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e with the solvent specified in the process package. As it's thick, pay extra attention to cavities and holes. Supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e the HeyGears \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e or a \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure\u003c\/a\u003e station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e take advantage of the ±0.04 mm tolerance for fits, but remember the PRM rule: walls thicker than 3 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse nitrile gloves, safety glasses and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat. Never pour liquid resin down the drain: cure it and dispose of it according to local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAU20\u003c\/strong\u003e: tooling and load-bearing structural parts. Requires PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: more impact-resistant (64 J\/m) with a 2H surface, but less rigid (34 MPa tensile). Doesn't need the PRM and also works on the RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, for functional parts without the PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e: the high-temperature resin in the range, if the part will be exposed to heat (PAU20 tops out at 60 °C).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e: the other Tooling resin, soft and elastic, silicone-like.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore technical resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e and for heat in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/high-temp-resistant-3d-resins\"\u003ehigh-temperature resistant resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone without the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003eThe Reflex RS and RS Turbo, or printers from other brands.\u003c\/li\u003e\n\u003cli\u003eParts that operate above 60 °C.\u003c\/li\u003e\n\u003cli\u003eThin-walled parts (3 mm or less).\u003c\/li\u003e\n\u003cli\u003eMiniatures and detailed parts: that's what PAP10 is for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I print PAU20 without the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears includes it in the list of resins that must use the PRM. On the Reflex and Reflex Turbo, use the Reflex PRM kit; on the Reflex 2 and 2 Pro, the PRM 2 with its Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex RS or RS Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears only lists it as compatible with the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro, all of which are 385 nm.\u003c\/p\u003e\n\u003ch4\u003eWhat about Elegoo, Anycubic or Phrozen printers?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin with locked parameters in HeyGears Blueprint. We don't sell it for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it real polycarbonate?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a photopolymer resin that HeyGears describes as polycarbonate-like because of its combination of strength and toughness. It doesn't have the heat resistance of polycarbonate: its heat deflection temperature is 60 °C.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is it?\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies a printing tolerance of ±0.04 mm.\u003c\/p\u003e\n\u003ch4\u003eWhy is it so thick?\u003c\/h4\u003e\n\u003cp\u003eIts viscosity is 3,400 mPa·s according to the TDS. Warming it helps: on the Reflex 2, the heated scraper reduces dripping time.\u003c\/p\u003e\n\u003ch4\u003eWhere can I find the exposure and curing times?\u003c\/h4\u003e\n\u003cp\u003eIn the PAU20 process package in HeyGears Blueprint. HeyGears doesn't publish them in the technical data sheet.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205558097,"sku":"DIST-6971437941775","price":116.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pau20-utillaje-negra-1kg.jpg?v=1792509589"},{"product_id":"resina-heygears-ultraprint-pah270-alta-temperatura-1kg","title":"HeyGears UltraPrint PAH270 - 270 °C High-Temperature Resin for Molds 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAH270: 270 °C resin for injection moulds and tooling (385 nm)\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Molding PAH270 is the most heat-resistant resin in the entire HeyGears Reflex range. Its heat deflection temperature reaches 270 °C (at 0.455 MPa) and its flexural modulus is 7,240 MPa, so a part printed with it barely deforms under high load and temperature. It is designed for short-run injection moulds, jigs and industrial fixtures. White colour, 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant: this is a 385 nm resin for HeyGears UltraCraft Reflex printers and it requires the Pulsing Release Module.\u003c\/strong\u003e It does not work with 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...). If you own one of those, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins-3d-405nm\"\u003e405 nm resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e270 °C HDT\u003c\/strong\u003e (518 °F) at 0.455 MPa, the highest in the Reflex catalogue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural modulus of 7,240 MPa\u003c\/strong\u003e: more than twice that of PAH10.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 Shore D hardness\u003c\/strong\u003e and good scratch resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mineral filler content:\u003c\/strong\u003e density of 1.38 to 1.70 g\/cm³. One kilo takes up less volume, which is why the bottle may look like it isn't full. This is normal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires the Pulsing Release Module\u003c\/strong\u003e on all compatible printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm, UltraCraft Reflex series only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears targets it at industrial applications where temperature is the deciding factor:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection moulds for short runs and design validation.\u003c\/li\u003e\n\u003cli\u003eParts close to the engine, such as turbo housings or exhaust heat shields.\u003c\/li\u003e\n\u003cli\u003eElectrical components that need to withstand heat, for example high-temperature sensor housings.\u003c\/li\u003e\n\u003cli\u003eJigs, fixtures and tooling that work under load and heat at the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find it alongside our other \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/high-temp-resistant-3d-resins\"\u003ehigh-temperature resistant resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinters:\u003c\/strong\u003e UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Reflex RS \/ RS Turbo, according to HeyGears' compatibility chart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e You cannot print with this resin without it. For the Reflex and Reflex Turbo there is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module Kit Reflex\u003c\/a\u003e, and for the Reflex 2 series the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module Kit Reflex 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're looking for a printer, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e are compatible.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e7,240 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e101 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e65 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e13 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e4 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e94 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e1,265 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e200 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eData from HeyGears' laboratory, average values with a deviation of ±10 %. According to the manufacturer, 200 h of UV ageing is equivalent to about 3 years indoors.\u003c\/p\u003e\n\u003ch4\u003eUseful design data\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall: 0.12 mm with reinforcement and 0.2 mm without.\u003c\/li\u003e\n\u003cli\u003eMinimum hole and pin: 0.4 mm.\u003c\/li\u003e\n\u003cli\u003eMinimum clearance between parts: 0.25 mm.\u003c\/li\u003e\n\u003cli\u003eDimensional tolerance: ±0.10 mm up to 50 mm and ±0.15 mm up to 100 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003ch4\u003eBefore printing\u003c\/h4\u003e\n\u003cp\u003eThis resin settles easily. Shake the bottle thoroughly before use. If the resin has been in the vat for more than 24 hours, stir it thoroughly until there is no powder left at the bottom, both before printing and before pouring it back into the bottle. Also check the vat film before each job: if it is deformed, cloudy or worn, replace it.\u003c\/p\u003e\n\u003cp\u003ePAH270 sticks very strongly to the build plate. HeyGears suggests washing and baking the parts without removing them, and taking them off right after baking, before curing.\u003c\/p\u003e\n\u003ch4\u003eWashing\u003c\/h4\u003e\n\u003cp\u003eThis is where it differs from other resins. HeyGears recommends \u003cstrong\u003emanual cleaning with IPA and a brush\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove excess resin with a lint-free cloth.\u003c\/li\u003e\n\u003cli\u003eRinse for a few seconds in IPA, scrub with a brush and dry with the cloth. Repeat 2 or 3 times with clean IPA.\u003c\/li\u003e\n\u003cli\u003eBlow with compressed air until no residue remains.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTotal contact time with the solvent should not exceed 3 minutes. HeyGears does not recommend the UltraCraft Wash or an ultrasonic cleaner for this resin: a long wash degrades the properties and can crack the part. You'll find IPA in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e section.\u003c\/p\u003e\n\u003ch4\u003ePost-curing\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eBake at 80 °C for 60 minutes.\u003c\/li\u003e\n\u003cli\u003eCure at 60 °C for 60 minutes.\u003c\/li\u003e\n\u003cli\u003eOptional: bake at 120 °C for 180 minutes in an oven.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSteps 1 and 2 are done in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, sending the job from Blueprint. The third requires a separate oven.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and the following hazard statements: H302 (harmful if swallowed), H315 (causes skin irritation), H317 (may cause an allergic skin reaction), H319 (causes serious eye irritation), H335 (may cause respiratory irritation) and H373 (may cause damage to organs through prolonged or repeated exposure).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrile gloves, safety glasses and good ventilation. Wear a mask when sanding cured parts.\u003c\/li\u003e\n\u003cli\u003eFlash point: above 105 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore between 20 and 28 °C, away from light and tightly closed. Shelf life of 18 months.\u003c\/li\u003e\n\u003cli\u003eDo not pour liquid resin down the drain: cure it and dispose of it in accordance with local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich HeyGears resin should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAH270:\u003c\/strong\u003e when heat comes first (270 °C HDT) and you can accept a very stiff part with low impact resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e:\u003c\/strong\u003e if 95-110 °C is enough for you. It is easier to print, does not require the Pulsing Release Module and has higher impact resistance (30-35 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e:\u003c\/strong\u003e polycarbonate-like tooling that bends before it breaks, but only withstands 60 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm printer from another brand, or a Reflex RS.\u003c\/li\u003e\n\u003cli\u003eAnyone who doesn't have, and doesn't plan to buy, the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003eParts that take knocks or need to flex: with 4 % elongation and 13 J\/m impact strength, it is brittle.\u003c\/li\u003e\n\u003cli\u003eFigures or models: it is a technical material and there are more convenient resins for that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAH270 in a 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a 385 nm resin formulated for UltraCraft Reflex printers. It is not validated on the Reflex RS \/ RS Turbo either.\u003c\/p\u003e\n\u003ch4\u003eIs the Pulsing Release Module required?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears states that this resin requires the Pulsing Release Module on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eWhy does the bottle look half empty?\u003c\/h4\u003e\n\u003cp\u003eBecause it is a very dense resin (1.38 to 1.70 g\/cm³). One kilo takes up less volume than a standard resin. The weight is correct.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for injection moulds?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, that is its main application, together with jigs and fixtures. Its 270 °C HDT and stiffness make it suitable for short runs and validation.\u003c\/p\u003e\n\u003ch4\u003eCan I wash it in the UltraCraft Wash or an ultrasonic cleaner?\u003c\/h4\u003e\n\u003cp\u003eHeyGears does not recommend it. Wash manually with IPA and a brush, with a maximum of 3 minutes of total contact with the solvent.\u003c\/p\u003e\n\u003ch4\u003eHow is it post-cured?\u003c\/h4\u003e\n\u003cp\u003eBake at 80 °C for 60 min and cure at 60 °C for 60 min in the UltraCraft Cure. Optionally, 120 °C for 3 hours in an oven.\u003c\/p\u003e\n\u003ch4\u003eParts stick very firmly to the build plate. Is that normal?\u003c\/h4\u003e\n\u003cp\u003eYes, it is a characteristic of the material. Wash and bake with the part still on the plate and remove it as soon as baking is finished.\u003c\/p\u003e\n\u003ch4\u003eWhere is it shipped from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205885777,"sku":"DIST-6971437943847","price":115.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg.jpg?v=1792509598"},{"product_id":"resina-heygears-ultraprint-pam10-color-1kg","title":"HeyGears UltraPrint PAM10 - CMYK Mixable Color Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAM10: mixable CMYK + white colour resin (385 nm)\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Design PAM10 is HeyGears' colour resin. It comes in five base colours, Cyan, Magenta, Yellow, Black and White, designed to be mixed together so you can get the exact shade you need. The best part is that the resin keeps its accuracy and printing behaviour whatever the mix. Mechanically, it is similar to ABS. Sold in 1 kg bottles per colour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is a 385 nm resin for HeyGears UltraCraft Reflex printers.\u003c\/strong\u003e It is not for 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...). If you have one of those, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins-3d-405nm\"\u003e405 nm resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive mixable colours:\u003c\/strong\u003e Cyan, Magenta, Yellow, Black and White (CMYK + W).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS-like properties:\u003c\/strong\u003e 45-47 MPa tensile strength and 20-25 % elongation at break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted part tolerance:\u003c\/strong\u003e ±0.05 mm, unaffected by colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-term stability:\u003c\/strong\u003e passes 600 h of UV exposure, damp heat, temperature change and colour fastness to perspiration tests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm, UltraCraft Reflex series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle. Choose the colour in the selector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow colour mixing works\u003c\/h3\u003e\n\u003cp\u003eJust like with printing ink: you start from the base colours and combine them by weight. HeyGears publishes a colouring guide with a practical example. For their colour number 17, the ratio is 20 g of Yellow to 0.6 g of Cyan. To prepare 300 g, scale it the same way: 300 g of Yellow and 9 g of Cyan.\u003c\/p\u003e\n\u003cp\u003eWhat you need to get it right:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA precision scale (HeyGears works to 0.01 g). A drop of resin weighs between 0.04 and 0.07 g, so the scale is what counts.\u003c\/li\u003e\n\u003cli\u003eMeasuring cups, droppers and a clean stirring stick for each colour.\u003c\/li\u003e\n\u003cli\u003eShake each bottle well before measuring out, as the pigment can settle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrepare a small sample first, cure it in a silicone mould and compare it with your reference under good lighting. The gloss of liquid resin is deceptive. Once you've found the shade, prepare the final quantity, mix while scraping the sides of the cup too, and let it rest covered and in the dark until the bubbles disappear.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAppearance prototypes in the final product colour, with no painting needed.\u003c\/li\u003e\n\u003cli\u003eConsumer electronics housings, such as headphone shells, that need long-term stability.\u003c\/li\u003e\n\u003cli\u003eDesign parts and creative projects with custom colours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're looking for a more technical resin, take a look at our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/abs-resins\"\u003eABS-like resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinters:\u003c\/strong\u003e UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Reflex RS \/ RS Turbo, according to HeyGears' compatibility table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you don't have a printer yet, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e are compatible.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eHeyGears publishes the values for the two ends of the range, Black and White.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003cth\u003eWhite\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e35 J\/m\u003c\/td\u003e\n\u003ctd\u003e50 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003ctd\u003e25 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e4,100 J\/m²\u003c\/td\u003e\n\u003ctd\u003e7,480 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1,600 MPa\u003c\/td\u003e\n\u003ctd\u003e1,490 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e45 MPa\u003c\/td\u003e\n\u003ctd\u003e47 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1,650 MPa\u003c\/td\u003e\n\u003ctd\u003e1,540 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e65 MPa\u003c\/td\u003e\n\u003ctd\u003e60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e59 °C\u003c\/td\u003e\n\u003ctd\u003e63 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e80 Shore D\u003c\/td\u003e\n\u003ctd\u003e82 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003ctd\u003e1.2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIt also passes damp heat (IEC 60068-2-78), temperature change (GB\/T 2423.22) and colour fastness to perspiration (ISO 105-E04) tests. Data from HeyGears' laboratory with a deviation of ±10 %.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle and stir in the vat. Once the mix is ready, wait until no bubbles remain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e IPA, 1 minute of initial washing and 1 minute of rinsing with clean alcohol, according to HeyGears' process table. You can do this in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e. You'll find IPA in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e 30 minutes, according to the same table. Ideally, use the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e with the Blueprint profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeftover resin:\u003c\/strong\u003e store the mix in an opaque, tightly sealed container and write down the recipe. That way you can reproduce the colour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and the following hazard statements: H315 (causes skin irritation), H317 (may cause an allergic skin reaction), H319 (causes serious eye irritation) and H335 (may cause respiratory irritation).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrile gloves, safety glasses and good ventilation, including while mixing colours.\u003c\/li\u003e\n\u003cli\u003eFlash point: 133 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry, ventilated place, protected from light and with the bottle tightly closed.\u003c\/li\u003e\n\u003cli\u003eDo not pour liquid resin down the drain: cure it and dispose of it in accordance with local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich HeyGears resin should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAM10:\u003c\/strong\u003e when colour matters and you want it straight off the printer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e:\u003c\/strong\u003e ABS-like in grey, with slightly higher strength (54 MPa tensile). Better if you're going to paint the part or colour doesn't matter to you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e:\u003c\/strong\u003e if you're after transparency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e:\u003c\/strong\u003e if the part has to withstand heat above 60 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm printer from another brand, or a Reflex RS.\u003c\/li\u003e\n\u003cli\u003eParts that will operate at high temperatures: its HDT is 59-63 °C.\u003c\/li\u003e\n\u003cli\u003eIf you don't want to weigh and mix, the most practical option is to use the base colours as they are or choose another resin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAM10 in a 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a 385 nm resin formulated for UltraCraft Reflex printers and their Blueprint profiles.\u003c\/p\u003e\n\u003ch4\u003eCan I print the colours without mixing?\u003c\/h4\u003e\n\u003cp\u003eYes. Each base colour is a complete resin. Mixing them is optional.\u003c\/p\u003e\n\u003ch4\u003eDoes accuracy or the profile change depending on the colour I mix?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, no. The resin is designed to maintain dimensional accuracy and success rate with any combination.\u003c\/p\u003e\n\u003ch4\u003eHow do I get a specific colour?\u003c\/h4\u003e\n\u003cp\u003eBy mixing by weight with a precision scale. Try a small sample, cure it and compare it before preparing the large batch.\u003c\/p\u003e\n\u003ch4\u003eWhich colours do you have?\u003c\/h4\u003e\n\u003cp\u003eThe five base colours: Cyan, Magenta, Yellow, Black and White, in 1 kg bottles.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it is optional on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eDoes it withstand sunlight without yellowing?\u003c\/h4\u003e\n\u003cp\u003eIt passes 600 h of UV ageing (ASTM G154), which HeyGears equates to around 8 years indoors or 1 year outdoors with no noticeable colour change.\u003c\/p\u003e\n\u003ch4\u003eWhere is it shipped from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Yellow","offer_id":55384206213457,"sku":"DIST-6971437941508","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"Magenta","offer_id":55384206246225,"sku":"DIST-6971437941485","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"Cyan","offer_id":55384206278993,"sku":"DIST-6971437941461","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":55384206311761,"sku":"DIST-6971437941522","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":55384206344529,"sku":"DIST-6971437941546","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-color-heygears-ultraprint-pam10-cmyk.jpg?v=1792509607"},{"product_id":"resina-heygears-ultraprint-pat10-transparente-1kg","title":"HeyGears UltraPrint PAT10 - Clear Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAT10: 385 nm clear resin with an acrylic-like finish\u003c\/h2\u003e\n\u003cp\u003ePAT10 is HeyGears' clear resin. It transmits 88.5 % of light with just 5.4 % haze, so with a good finish it looks like acrylic. It's tough, won't crack even if it falls off the table, and is formulated not to yellow: HeyGears cites stable colour for 8 years indoors. It comes in a 1 kg bottle and is only for HeyGears Reflex 385 nm printers.\u003c\/p\u003e\n\u003cp\u003eUse it for clear parts on figures, scale modelling accessories, prototypes, electronics components and even end-use parts. According to HeyGears, it can also be used for wearable products that are in contact with the skin.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: this is a 385 nm resin for certain HeyGears printers only\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PAT10 is only validated on Reflex printers that use 385 nm UV light (385+ nm, according to HeyGears):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo (405 nm). HeyGears doesn't include them in its list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not a resin for standard 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen, Creality and similar). HeyGears doesn't provide profiles for them or validate it outside the 385 nm Reflex printers. If you're looking for a clear resin for another printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/transparent-3d-resins\"\u003eclear 3D resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparency:\u003c\/strong\u003e 88.5 % light transmission and 5.4 % haze (ASTM D1003)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-yellowing:\u003c\/strong\u003e passes 600 h of UV ageing, which HeyGears equates to 8 years indoors or 1 year outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery tough:\u003c\/strong\u003e 13200 J\/m² work of fracture and 25 % elongation at break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e heat deflection at 67 °C at 0.455 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm on parts up to 20 mm (±0.1 mm up to 50 mm and ±0.2 mm up to 100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin tests:\u003c\/strong\u003e passes cytotoxicity, sensitisation and skin irritation (ISO 10993-5, -10 and -23)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 0.9 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, clear. 385 nm only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears recommends it for four uses: clear parts for figures, consumer electronics prototypes, clear end-use parts and clear applications that must not yellow over time. Its website shows, for example, blocks with dragonflies inside that look like amber or acrylic.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone printing on a 385 nm Reflex who wants real transparency: housings that show what's inside, display pieces or wearable accessories. If toughness is what matters to you, it stands out there too: it has the highest work of fracture of the UltraPrint resins in this selection.\u003c\/p\u003e\n\n\u003ch3\u003eHeyGears printer compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e not compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. With it, you can print finer holes and pillars (0.3 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that compatibility and process packages are being updated; whatever appears in Blueprint Studio for your printer takes precedence. If you're looking for a compatible machine, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmission\u003c\/td\u003e\n\u003ctd\u003eASTM D1003\u003c\/td\u003e\n\u003ctd\u003e88.5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHaze\u003c\/td\u003e\n\u003ctd\u003eASTM D1003\u003c\/td\u003e\n\u003ctd\u003e5.4 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e31 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e25 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e13200 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1620 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1580 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e43 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e67 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e67 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e81 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e925 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated UV \/ thermal ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154 \/ -\u003c\/td\u003e\n\u003ctd\u003e600 h \/ 1600 h passed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCytotoxicity, sensitisation and skin irritation\u003c\/td\u003e\n\u003ctd\u003eISO 10993-5, -10, -23\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a ±10 % deviation, measured after curing in Performance mode in the UltraCraft Cure.\u003c\/p\u003e\n\u003ch4\u003eMinimum design features\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eStandard tank\u003c\/th\u003e\n\u003cth\u003ePulsing Release tank\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum gap\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wall\u003c\/td\u003e\n\u003ctd\u003e0.24 mm\u003c\/td\u003e\n\u003ctd\u003e0.22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum hole\u003c\/td\u003e\n\u003ctd\u003e0.5 mm\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pillar\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnsupported angle\u003c\/td\u003e\n\u003ctd\u003e25°\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the tank. Slice in Blueprint Studio, selecting PAT10. If you're not going to print within 3 days, filter the resin and return it to the bottle; don't leave it in the tank for more than 7 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e with 95 % alcohol. In the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e at 180 rpm, a 3-minute pre-wash with used alcohol and a 3-minute fine wash with clean alcohol; in an ultrasonic cleaner, 3 + 2 minutes. Don't exceed 10 minutes in alcohol in total. Dry with compressed air or in an oven at 40 °C for 10 minutes. You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e you have two options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast:\u003c\/strong\u003e no heat, in air, 7 minutes at room temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e with heat, in air: 15 minutes of preheating at 46 °C, 15 minutes of curing at 46 °C and 25 minutes of baking at 62 °C. This is the mode HeyGears uses to measure the data in the table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt's normal for the part to come out of curing slightly yellowish. HeyGears explains that the tint disappears within a week if you cure in Fast mode, or within 1-2 days in Performance mode. More equipment in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor a crystal-clear finish:\u003c\/strong\u003e wet sand from 400 to 1200 grit, going up in steps of 200 and not moving on to the next grit until you've removed the scratches from the previous one. Clean off the dust with water, then with IPA or 95 % alcohol and a microfibre cloth. Once the part is dry, apply a coat of clear acrylic varnish (car clear coat) or UV varnish. UV varnish gives a better finish, but some can make the part more brittle: test first. The more you sand, the clearer it gets.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAT10 carries the signal word \"Warning\": it causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317) and may cause respiratory irritation (H335).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and seek medical advice.\u003c\/li\u003e\n\u003cli\u003eFlash point: 130 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore sealed between 15 and 28 °C, away from sunlight and moisture. Shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe skin tests (ISO 10993) refer to the printed and cured part. This is not a dental or medical resin; for that, see our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/dental-resins\"\u003edental resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one to choose from the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, opaque grey, for functional parts. Also works on the Reflex RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e: translucent pink and water-washable, if you don't need true transparency.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: the standard matte modelling resin, for opaque figures and prototypes.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pam10-color-1kg\"\u003ePAM10\u003c\/a\u003e: HeyGears' mixable colour resins, if you want to tint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you have a Reflex RS or RS Turbo: it's not compatible.\u003c\/li\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you want maximum transparency without sanding or varnishing: the acrylic-like finish requires working the part.\u003c\/li\u003e\n\u003cli\u003eIf you're looking for a resin for dental or medical use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAT10 work on the Reflex RS or RS Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears only lists it as compatible with the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro, which are 385 nm printers.\u003c\/p\u003e\n\u003ch4\u003eWhat about an Elegoo, Anycubic or other 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin with no profiles or validation outside the compatible HeyGears Reflex printers.\u003c\/p\u003e\n\u003ch4\u003eDoes it come out clear straight from the printer?\u003c\/h4\u003e\n\u003cp\u003eTo achieve the acrylic-like finish, you need to sand up to 1200 grit and apply clear varnish. HeyGears sums it up like this: the more you sand, the clearer it gets.\u003c\/p\u003e\n\u003ch4\u003eWhy does it turn yellow after curing?\u003c\/h4\u003e\n\u003cp\u003eThat's normal. According to HeyGears, the tint disappears within a week with Fast curing, or within 1-2 days with Performance mode.\u003c\/p\u003e\n\u003ch4\u003eDoes it yellow over the years?\u003c\/h4\u003e\n\u003cp\u003eIt's formulated not to: it passes 600 hours of UV ageing, which HeyGears equates to 8 years indoors with no noticeable colour change.\u003c\/p\u003e\n\u003ch4\u003eCan it be used for parts that touch the skin?\u003c\/h4\u003e\n\u003cp\u003eHeyGears says yes for wearable products: the cured part passes ISO 10993 tests for cytotoxicity, sensitisation and skin irritation. It is not a resin for medical or dental use.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it's optional. With it, you can print holes and pillars down to 0.3 mm.\u003c\/p\u003e\n\u003ch4\u003eWhat temperature can it withstand?\u003c\/h4\u003e\n\u003cp\u003eIts heat deflection temperature is 67 °C at 0.455 MPa.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384206508369,"sku":"DIST-6971437941447","price":104.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-transparente-heygears-ultraprint-pat10-1kg.jpg?v=1792509612"},{"product_id":"resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg","title":"HeyGears UltraPrint PAH10 - Rigid High-Temperature Resin for Moulds 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAH10: rigid high-temperature resin for moulds and tooling\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Molding PAH10 is HeyGears' resin for parts that have to withstand heat and load without deforming. It is very stiff (flexural modulus of up to 3,350 MPa), has a heat deflection temperature of 110 °C in the Clear Tan colour and is mainly used for silicone moulds, tooling and functional prototypes that run hot. We sell it in a 1 kg bottle and in two colours: Clear Tan and Black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeads up before you buy, because each colour works on different printers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan: 385 nm only.\u003c\/strong\u003e Only on HeyGears UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBlack: 385 nm and also HeyGears' 405 nm Reflex RS \/ RS Turbo.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeither is validated on 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...). The fact that Black works on the RS doesn't mean it works on any 405 nm printer: it relies on the HeyGears profiles in Blueprint. If you have a printer from another brand, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins-3d-405nm\"\u003e405 nm resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat deflection temperature (HDT at 0.455 MPa):\u003c\/strong\u003e 110 °C in Clear Tan and 95 °C in Black.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh stiffness:\u003c\/strong\u003e tensile modulus of 3,330 MPa (Clear Tan) and 3,150 MPa (Black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 140 MPa and 136 MPa respectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted part tolerance:\u003c\/strong\u003e ±0.05 mm according to HeyGears (measured with Black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e passes 600 h of UV (ASTM G154) and 1,600 h of accelerated thermal ageing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e Clear Tan 385 nm only (UltraCraft Reflex series). Black at 385 nm and on the 405 nm Reflex RS \/ RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTwo colours, two behaviours\u003c\/h3\u003e\n\u003cp\u003eThey're not the same material dyed a different colour. HeyGears provides different data for each:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan:\u003c\/strong\u003e the one with the highest heat resistance (HDT 110 °C) and slightly higher tensile strength. HeyGears recommends it for silicone moulds, prototypes and end-use parts with moderate thermal demands, such as intake or exhaust ducts on RC cars that run at around 100 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e designed for structures that bear continuous load. Its strong point is long-term resistance to deformation. It's used for structural parts, inserts, component housings and tooling for silicone moulding. It withstands slightly less heat (HDT 95 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMoulds and dies for casting silicone, where the mould has to hold its shape under heat.\u003c\/li\u003e\n\u003cli\u003eFunctional prototypes that need stiffness and creep resistance (so they don't \"give\" over time under load).\u003c\/li\u003e\n\u003cli\u003eParts near heat sources: ducts, motor mounts, housings.\u003c\/li\u003e\n\u003cli\u003eTooling, jigs and workshop fixtures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is an engineering resin. If you're looking for other heat-resistant options, take a look at our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/high-temp-resistant-3d-resins\"\u003ehigh-temperature resistant resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e collections.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears' compatibility table:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro (385 nm) and also Reflex RS \/ RS Turbo (405 nm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional for both colours. Works with the standard tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrint profiles are selected in HeyGears' Blueprint software. If you don't have a printer yet, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e work at 385 nm. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e is 405 nm and only supports the Black colour: if you have an RS, don't order Clear Tan.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eClear Tan\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e110 °C\u003c\/td\u003e\n\u003ctd\u003e95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e3,330 MPa\u003c\/td\u003e\n\u003ctd\u003e3,150 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e81 MPa\u003c\/td\u003e\n\u003ctd\u003e75 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e3,350 MPa\u003c\/td\u003e\n\u003ctd\u003e3,050 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e140 MPa\u003c\/td\u003e\n\u003ctd\u003e136 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e6 %\u003c\/td\u003e\n\u003ctd\u003e7 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e35 J\/m\u003c\/td\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3,550 J\/m²\u003c\/td\u003e\n\u003ctd\u003e3,050 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e87 Shore D\u003c\/td\u003e\n\u003ctd\u003e89 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.6 %\u003c\/td\u003e\n\u003ctd\u003e0.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e660 mPa·s\u003c\/td\u003e\n\u003ctd\u003e750 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average values with a deviation of ±10 %. According to the manufacturer, 600 h of UV is equivalent to around 8 years indoors or 1 year outdoors with less than 30 % loss of properties.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003ch4\u003eBefore printing\u003c\/h4\u003e\n\u003cp\u003eShake the bottle well and stir the resin in the tank before each print. If the resin is going to sit unused for more than 3 days, filter it and return it to the bottle. HeyGears recommends not leaving it in the tank for more than 7 days.\u003c\/p\u003e\n\u003ch4\u003eWashing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-stage wash with IPA or 95 % alcohol: a first pass with used alcohol and a second with clean alcohol.\u003c\/li\u003e\n\u003cli\u003eIn the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e (Black profile): 250 rpm, 2 min + 2 min. In an ultrasonic cleaner: 1 min + 2 min.\u003c\/li\u003e\n\u003cli\u003eDon't leave the part in alcohol for more than 10 minutes in total. Dry it with compressed air or for 10 minutes at 50 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find isopropyl alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003ePost-curing\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies heated post-curing: \u003cstrong\u003e60 °C for 60 minutes\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, Performance mode. The properties in the table were measured with this cure. If you cure with another machine without heat, don't expect to reach the same heat deflection temperature.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and the following hazard statements: H302 (harmful if swallowed), H315 (causes skin irritation), H317 (may cause an allergic skin reaction), H319 (causes serious eye irritation), H335 (may cause respiratory irritation) and H373 (may cause damage to organs through prolonged or repeated exposure).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear nitrile gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eFlash point: 123 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore between 15 and 28 °C, away from light and tightly closed. Shelf life of 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich HeyGears resin should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAH10:\u003c\/strong\u003e the balance between stiffness and temperature (95-110 °C). No mandatory Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e:\u003c\/strong\u003e if you need to withstand much more heat (HDT of 270 °C), for example for injection moulds. It's more brittle and requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e:\u003c\/strong\u003e polycarbonate-like tooling resin, with higher elongation (23 %) but only 60 °C HDT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e:\u003c\/strong\u003e ABS-like for housings and prototypes without thermal demands (HDT 63 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm LCD printer from another brand. It's not validated outside HeyGears printers.\u003c\/li\u003e\n\u003cli\u003eIf you have a Reflex RS or RS Turbo and want Clear Tan: only Black works on those printers.\u003c\/li\u003e\n\u003cli\u003eParts that need to bend or take impacts: with 6-7 % elongation it's rigid and brittle under impact.\u003c\/li\u003e\n\u003cli\u003eHigh-temperature plastic injection moulds: that's what PAH270 is for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAH10 work on a 405 nm printer like an Elegoo or an Anycubic?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. HeyGears only validates it on its own printers and with its Blueprint profiles. Clear Tan is only for the 385 nm Reflex printers. Black also works on the 405 nm Reflex RS \/ RS Turbo, but not on 405 nm printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between Clear Tan and Black?\u003c\/h4\u003e\n\u003cp\u003eClear Tan withstands higher temperatures (HDT 110 °C vs 95 °C) and is slightly stronger. Black is aimed at structures under continuous load and is the only one that's also compatible with the Reflex RS \/ RS Turbo.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. For PAH10 it's optional on all compatible printers.\u003c\/p\u003e\n\u003ch4\u003eCan it be used to make silicone moulds?\u003c\/h4\u003e\n\u003cp\u003eYes, it's one of its main uses. Its stiffness and heat resistance help keep the mould from deforming while the silicone is cast and cured.\u003c\/p\u003e\n\u003ch4\u003eHow is it post-cured?\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies 60 °C for 60 minutes with heat in the UltraCraft Cure (Performance mode). The published properties were measured this way.\u003c\/p\u003e\n\u003ch4\u003eIs it compatible with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eOnly the Black colour, according to the manufacturer's compatibility table. Clear Tan is validated on Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eHow long does an unopened bottle last?\u003c\/h4\u003e\n\u003cp\u003eShelf life is 18 months, stored between 15 and 28 °C and protected from light and moisture.\u003c\/p\u003e\n\u003ch4\u003eWhere is it shipped from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Black","offer_id":55384206770513,"sku":"DIST-6971437941935","price":104.99,"currency_code":"EUR","in_stock":true},{"title":"Light brown","offer_id":55384206803281,"sku":"DIST-6971437941560","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pah10-negro-1kg.jpg?v=1792509620"},{"product_id":"resina-heygears-ultraprint-pau11-tipo-abs-1kg","title":"HeyGears UltraPrint PAU11 - General Purpose ABS-Like Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAU11: ABS-like resin for functional parts\u003c\/h2\u003e\n\u003cp\u003ePAU11 is HeyGears' general-purpose resin with ABS-like properties. It handles impacts well, doesn't break easily and keeps its dimensions and colour over time. HeyGears recommends it for end-use parts and industrial applications: fasteners, assembly parts and enclosures. It's grey and comes in a 1 kg bottle for HeyGears Reflex printers.\u003c\/p\u003e\n\u003cp\u003eIt's the successor to PAU10. The clearest practical difference is compatibility: PAU10 only worked on the Reflex and Reflex Turbo, while PAU11 works across the entire Reflex series, including the Reflex 2 and Reflex RS.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has a pre-tuned print profile in Blueprint, the brand's software. PAU11 is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWorking on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar) and doesn't guarantee results on them. If you're looking for an ABS-like resin for another printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS-like:\u003c\/strong\u003e 42 J\/m notched impact strength and 21 % elongation at break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToughness:\u003c\/strong\u003e 6870 J\/m² work of fracture, more than double that of PAB10 or purple PAS10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e 54 MPa tensile and 86 MPa flexural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e heat deflection at 63 °C at 0.455 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm tolerance on the printed part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable over time:\u003c\/strong\u003e passes 600 h of UV ageing, which HeyGears equates to 8 years indoors or 1 year outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 0.9 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eThis is the UltraPrint resin for parts that have to work, not just look good: electronics enclosures, clips, brackets, covers, assembly parts, functional prototypes you'll assemble and disassemble, and printed fasteners. HeyGears describes it as a balance of good mechanical properties, dimensional accuracy and stable colour over long-term use.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone who owns a Reflex and wants to print useful parts, or for anyone making prototypes that have to pass fit and drop tests. It also works for figures and miniatures, but standard modelling resins give a better finish for less money there.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. It isn't required, but you can use it to reduce peel forces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that the compatibility table and process packages are being updated; whatever appears in Blueprint Studio for your printer takes precedence. If you're looking for a machine, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact strength\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e42 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e21 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e6870 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1900 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1980 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e54 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e86 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e63 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e81 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e426 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h passed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e1600 h passed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat, temperature change and colour fastness\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78, ISO 105-E04 and others\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a deviation of ±10 %. In the ageing tests, HeyGears considers a test passed if properties drop by less than 30 %, there is no noticeable colour change (ΔE \u0026lt; 2) and dimensional deviation stays within ±0.1 mm.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the vat before you start. Slice in Blueprint Studio by selecting PAU11; the profile comes pre-tuned for each Reflex printer. Don't leave the resin in the vat for many days: filter it and return it to the bottle if you won't be printing soon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigning functional parts:\u003c\/strong\u003e with a ±0.05 mm tolerance you can print snap fits and parts that assemble with others. If you're going to tap threads or make clips, give the walls some thickness: the 21 % elongation gives it room to bend before breaking, but it isn't a flexible resin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing and curing:\u003c\/strong\u003e HeyGears hasn't publicly released a washing and curing guide with times for PAU11. If you have the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, send jobs from Blueprint so they apply the brand's process. The mechanical data in the table are achieved with a full cure; a poorly cured part won't reach those figures. You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e and equipment in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAU11 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear chemical-resistant gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water for several minutes and consult a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: above 105 °C. Not considered dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore it tightly closed, in a ventilated place and away from heat and sunlight.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one to choose within the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e or PAB10: if you print figures and models for display or painting, the standard resins give a better matte finish and cost less.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: if the part needs to be transparent. It has an even higher work of fracture (13200 J\/m²), but it's for parts that let light through.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e: HeyGears' tooling resin, for jigs and workshop tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e or \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e: if the part will operate at temperatures above PAU11's 63 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you're looking for a flexible or elastic resin: that's what \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e or \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e are for.\u003c\/li\u003e\n\u003cli\u003eIf the part will operate under heat: its heat deflection temperature is 63 °C.\u003c\/li\u003e\n\u003cli\u003eIf you only print miniatures for painting: a standard resin will give you the same result for less.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAU11 work with Elegoo, Anycubic or other 405 nm printers?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. It works on the Reflex RS, which is 405 nm, but with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between PAU11 and PAU10?\u003c\/h4\u003e\n\u003cp\u003ePAU10 is only compatible with the Reflex and Reflex Turbo. PAU11 works across the entire series: Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro, Reflex RS and Reflex RS Turbo.\u003c\/p\u003e\n\u003ch4\u003eIs it really like ABS?\u003c\/h4\u003e\n\u003cp\u003eHeyGears defines it as a resin with properties close to ABS: it handles impacts well (42 J\/m notched) and doesn't break easily. It's still a photopolymer resin; it isn't injection-moulded ABS or filament.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it's optional. PAU11 prints with the standard vat.\u003c\/p\u003e\n\u003ch4\u003eWhat temperature can it withstand?\u003c\/h4\u003e\n\u003cp\u003eIts heat deflection temperature is 63 °C at 0.455 MPa. Above that, the part may deform under load.\u003c\/p\u003e\n\u003ch4\u003eDoes it yellow over time?\u003c\/h4\u003e\n\u003cp\u003eIt has passed 600 hours of UV ageing and a colour fastness test. HeyGears equates this to 8 years indoors or 1 year outdoors with no noticeable colour change.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is it?\u003c\/h4\u003e\n\u003cp\u003eA tolerance of ±0.05 mm on the printed part, according to the technical data sheet.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384206967121,"sku":"DIST-6971437942932","price":64.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-tipo-abs-heygears-ultraprint-pau11-gris-1kg.jpg?v=1792509624"},{"product_id":"resina-heygears-ultraprint-parp10-prototipado-rapido-1kg","title":"HeyGears UltraPrint PARP10 Orange Clay - Rapid Prototyping Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PARP10 Orange Clay: rapid prototyping resin for fine detail\u003c\/h2\u003e\n\u003cp\u003ePARP10 Orange Clay is HeyGears' rapid prototyping resin in an orange clay colour. It has a matte finish that hides layer lines, good hardness and moderate toughness, with a work of fracture of 3350 J\/m² so fine details don't snap at the first touch. HeyGears recommends it for highly detailed models: figures, jewellery prototypes and moulds. It comes in a 1 kg bottle for HeyGears Reflex printers.\u003c\/p\u003e\n\u003cp\u003eHeyGears offers two PARP10 resins. This is the Orange Clay: compared with the pale purple version, it has slightly higher hardness (84 vs 81 Shore D) and toughness, and it also works on the Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PARP10 Orange Clay is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWorking on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar) and doesn't guarantee results on them. If you don't own a Reflex, this isn't the resin for you: check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins\"\u003e3D printer resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail:\u003c\/strong\u003e minimum printable detail of 0.1 mm, according to HeyGears\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface:\u003c\/strong\u003e matte, with layer lines concealed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm on parts up to 20 mm (±0.10 mm up to 50 mm and ±0.20 mm up to 100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToughness:\u003c\/strong\u003e 3350 J\/m² work of fracture and 34 J\/m notched impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 84 Shore D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e 55 MPa tensile and 80 MPa flexural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast curing:\u003c\/strong\u003e 5 minutes without heat in the UltraCraft Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, orange clay colour (Orange Clay)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears recommends it for military models, car models, scale modelling, jewellery moulds, anime and video game figures that need high fidelity, and appearance prototypes where the surface is what matters. It has also passed the usual ageing tests, so your part will hold up on display without degrading quickly.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone printing small, highly detailed figures, for modellers, and for jewellers who want to validate a ring or pendant design before casting. Note on that last point: HeyGears presents it as a prototyping and mould resin, not a castable resin. To cast the part directly in metal, the one to choose in the range is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ecastable PAC10\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. With it you get finer gaps (0.15 mm vs 0.2 mm) and longer overhangs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDon't confuse it with the pale purple PARP10 (Pale Purple): it's a different version with different data, and HeyGears lists it as compatible only with the Reflex, Reflex Turbo, RS and RS Turbo. HeyGears notes that compatibility and process packages are being updated; whatever appears in Blueprint Studio takes precedence. If you're looking for a machine, take a look at the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e34 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e15 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3350 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1750 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1830 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e55 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e80 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e52 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e84 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1.1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e320 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e200 h passed (approx. 3 years indoors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a deviation of ±10 %, measured after 5 minutes of dry curing in Performance mode on the UltraCraft Cure.\u003c\/p\u003e\n\u003ch4\u003eDesign minimums\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eStandard tank\u003c\/th\u003e\n\u003cth\u003ePulsing Release tank\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum gap\u003c\/td\u003e\n\u003ctd\u003e0.2 mm\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverhang\u003c\/td\u003e\n\u003ctd\u003e1.0 mm\u003c\/td\u003e\n\u003ctd\u003e1.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnsupported angle\u003c\/td\u003e\n\u003ctd\u003e25°\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wall\u003c\/td\u003e\n\u003ctd\u003e0.18 mm\u003c\/td\u003e\n\u003ctd\u003e0.2 mm (0.22 mm unreinforced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum hole\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pillar\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the tank so no pigment settles at the bottom. Slice in Blueprint Studio by selecting \"Modeling PARP10 Orange Clay\", with automatic supports. If you won't be printing within 3 days, filter the resin and return it to the bottle; don't leave it in the tank for more than 7 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e with 95 % alcohol or IPA. In the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e at 180 rpm, a 2-minute pre-wash with used alcohol and a 2-minute fine wash with clean alcohol. In an ultrasonic cleaner, the same 2 + 2 minutes. Don't leave the part in alcohol for more than 10 minutes in total, and air-dry it before curing. You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, without heat and in air, 5 minutes at room temperature. HeyGears recommends sending the job from Blueprint, which applies a more refined process than manual mode. More equipment in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports:\u003c\/strong\u003e on regular parts, remove them by hand with a twist. On parts with thin walls, it's better to use flush cutters or a craft knife so you don't tear off detail.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PARP10 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses throughout the process, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and consult a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: 106 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore it closed between 15 and 28 °C, away from sunlight and moisture. Factory shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one to choose in the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: the standard modelling resin, in white, pale purple or black, for everyday figures and prototypes.\u003c\/li\u003e\n\u003cli\u003ePAB10: grey, designed for sanding and painting miniatures, with higher impact strength (45 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e: HeyGears' high-detail resin for production.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e: if you want to cast the part directly in metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, for functional parts that take knocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you want to lost-wax cast the part: use a castable resin, such as PAC10 or those in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/burnout-resins\"\u003ecastable resins\u003c\/a\u003e collection.\u003c\/li\u003e\n\u003cli\u003eIf the part will be exposed to heat: its heat deflection temperature is 52 °C.\u003c\/li\u003e\n\u003cli\u003eIf you need functional parts that withstand impacts: PAU11 is a better choice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PARP10 Orange Clay on an Elegoo, Anycubic or other 405 nm LCD printer?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. Although it works on the Reflex RS, which is 405 nm, it does so with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhich HeyGears printers does it work on?\u003c\/h4\u003e\n\u003cp\u003eThe Reflex and Reflex Turbo, the Reflex 2 and Reflex 2 Pro (385 nm), and the Reflex RS and RS Turbo (405 nm).\u003c\/p\u003e\n\u003ch4\u003eIs it the same as the purple PARP10?\u003c\/h4\u003e\n\u003cp\u003eNo. PARP10 Orange Clay has its own data (84 Shore D, 3350 J\/m² work of fracture) and is also compatible with the Reflex 2 and Reflex 2 Pro, which the purple version isn't.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for jewellery casting?\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies it for jewellery prototypes and moulds, not for burnout. If you want to cast the part in metal, use the castable PAC10.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it's optional. With it you can print finer gaps and longer overhangs.\u003c\/p\u003e\n\u003ch4\u003eHow do I wash and cure it?\u003c\/h4\u003e\n\u003cp\u003eWith 95 % alcohol or IPA: a 2-minute pre-wash and a 2-minute fine wash. Then 5 minutes of curing without heat in the UltraCraft Cure.\u003c\/p\u003e\n\u003ch4\u003eWhat's the minimum detail it can achieve?\u003c\/h4\u003e\n\u003cp\u003eHeyGears quotes details down to 0.1 mm, with 0.4 mm pillars and holes from 0.3 mm.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384207229265,"sku":"DIST-6971437941645","price":67.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-parp10-orange-clay-1kg.jpg?v=1792509631"},{"product_id":"resina-heygears-ultraprint-paf10-flexible-1kg","title":"HeyGears UltraPrint PAF10 - PVC-Like Flexible Resin for Reflex 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAF10: PVC-like flexible resin for HeyGears Reflex, in volcanic grey and clear\u003c\/h2\u003e\n\u003cp\u003ePAF10 is HeyGears' flexible production resin. It behaves like PVC: it bends without breaking, survives drops and doesn't crack over time. It's designed mainly for figures and gaming miniatures that are meant to be played with, not just looked at, and in its clear version also for electronics parts and industrial prototypes. 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003eIt's an UltraPrint resin for HeyGears Reflex printers: \u003cstrong\u003e385 nm\u003c\/strong\u003e on the Reflex, Reflex Turbo, Reflex 2 and 2 Pro, and \u003cstrong\u003e405 nm\u003c\/strong\u003e on the Reflex RS and RS Turbo. \u003cstrong\u003eIt is not suitable for generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...). If you don't have a Reflex, don't order it.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro; 405 nm on the Reflex RS and RS Turbo. Only validated on HeyGears printers, not on 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC-like flexibility:\u003c\/strong\u003e 46 % elongation at break in volcanic grey and 34 % in clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery tough:\u003c\/strong\u003e work of fracture of 5.390 J\/m² (volcanic grey), resistant to repeated bending.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e 82 % light transmission and no yellowing during prolonged use and storage, according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail:\u003c\/strong\u003e minimum embossed detail of 0.08 mm and almost invisible layer lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 1 % (clear) and 1.6 % (volcanic grey).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not require the Pulsing Release Module.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1.000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eGaming miniatures get dropped, knocked about in the case and break at their thinnest parts: swords, wings, spears. With a rigid resin, that's one less piece. PAF10 is made to solve that problem. HeyGears markets it as a gaming miniature resin that survives drops, doesn't crack or chip and bends noticeably without breaking.\u003c\/p\u003e\n\u003cp\u003eEach colour has its own use:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolcanic grey:\u003c\/strong\u003e figures, miniatures and busts. Smooth surface with almost invisible layers, a good tone for seeing detail and for priming. It's the most flexible and most impact-resistant variant (52 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e parts that need to be seen through or let light pass. HeyGears recommends it for figures, consumer electronics parts and industrial prototypes. HeyGears also sells it in a bundle with UltraGlaze ClearG115 Gloss varnish for a glossier finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears, PAF10 is compatible with the Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro, using the HeyGears Blueprint process packages. HeyGears notes that compatibility is being updated and that Blueprint is the reference. It does not require the Pulsing Release Module (PRM).\u003c\/p\u003e\n\u003cp\u003eAbout the light source: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work at 385 nm; the Reflex RS and RS Turbo at 405 nm. HeyGears validates it on both families, always with its own profiles. That doesn't make it a resin for any 405 nm printer.\u003c\/p\u003e\n\u003cp\u003eIf you use the PRM on a Reflex RS or RS Turbo, PAF10 is on the kit's list of compatible resins. Printers in our shop: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e. More in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), version 2.0 of 02.2026. Average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eVolcanic grey\u003c\/th\u003e\n\u003cth\u003eClear\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e52 J\/m\u003c\/td\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e46 %\u003c\/td\u003e\n\u003ctd\u003e34 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e5.390 J\/m²\u003c\/td\u003e\n\u003ctd\u003e4.780 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e930 MPa\u003c\/td\u003e\n\u003ctd\u003e1.200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e28 MPa\u003c\/td\u003e\n\u003ctd\u003e32 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e39 MPa\u003c\/td\u003e\n\u003ctd\u003e40 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e38 °C\u003c\/td\u003e\n\u003ctd\u003e40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e75 Shore D\u003c\/td\u003e\n\u003ctd\u003e75 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1.6 %\u003c\/td\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e550 mPa·s\u003c\/td\u003e\n\u003ctd\u003e700 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmission\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e82 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2\/2 Pro) and 405 nm (Reflex RS\/RS Turbo), always with HeyGears profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 124 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamp heat test:\u003c\/strong\u003e IEC 60068-2-78, listed as passed in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word of caution about \"flexible\": at 75 Shore D it isn't rubber. It's a tough plastic that gives and springs back, like rigid PVC, not a soft material. If you're looking for a silicone-like feel, check out PAE10.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eHeyGears does not publish exposure or curing times in the TDS. The parameters are included in the HeyGears Blueprint process packages and the Reflex applies them automatically.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle. The clear version is slightly more viscous (700 mPa·s).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e use the solvent specified in the process package. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e is the washing station for the Reflex platform. For manual washing, see \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e the HeyGears \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e or any \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure\u003c\/a\u003e station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e to get it as clear as possible, ClearG115 Gloss varnish is the option recommended by the manufacturer itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNitrile gloves, safety glasses and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat. Don't pour liquid resin down the drain: cure it and dispose of it according to local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAF10\u003c\/strong\u003e: figures that get dropped and bent, and tough clear parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e: finer detail and more rigidity, for display miniatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: rigid parts subject to friction, with a scratch-resistant 2H surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e: genuine silicone-like feel (49 Shore A, 433 % elongation). Requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: rigid clear modelling resin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/flexible-3d-resins\"\u003eflexible resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/transparent-3d-resins\"\u003eclear resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003eSoft rubber-like or gasket parts: it's a tough PVC-like material, not an elastomer.\u003c\/li\u003e\n\u003cli\u003eParts left in the sun in a car or near heat: heat deflection at 38-40 °C.\u003c\/li\u003e\n\u003cli\u003eRigid precision parts that must not give: there are more rigid resins in the range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAF10 work on Elegoo, Anycubic or Phrozen printers?\u003c\/h4\u003e\n\u003cp\u003eWe don't sell it for that. It's a resin for the HeyGears Reflex series (385 nm, and 405 nm on the RS and RS Turbo), with parameters in HeyGears Blueprint. There are no official profiles for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it a 385 nm or a 405 nm resin?\u003c\/h4\u003e\n\u003cp\u003eBoth, but only within the HeyGears range. The Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro cure it at 385 nm; the Reflex RS and RS Turbo at 405 nm. In both cases with HeyGears Blueprint profiles. The fact that it works on an RS at 405 nm doesn't mean it works on any 405 nm printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it require the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. It works with the standard vat. If you have the PRM on a Reflex RS or RS Turbo, it's also on the compatibility list.\u003c\/p\u003e\n\u003ch4\u003eIs it soft like rubber?\u003c\/h4\u003e\n\u003cp\u003eNo. It's 75 Shore D. It bends and springs back without breaking, like PVC, but it's a plastic. For a silicone-like feel, there's PAE10.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between volcanic grey and clear?\u003c\/h4\u003e\n\u003cp\u003eVolcanic grey is more flexible (46 % elongation) and more impact-resistant (52 J\/m). Clear lets through 82 % of light, absorbs less water (1 %) and is slightly more rigid.\u003c\/p\u003e\n\u003ch4\u003eDoes the clear version yellow?\u003c\/h4\u003e\n\u003cp\u003eHeyGears markets it as a resin that doesn't yellow during prolonged use or storage.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for gaming miniatures?\u003c\/h4\u003e\n\u003cp\u003eThat's its main use. HeyGears presents it for miniatures that survive drops, resist cracking and chipping, and have a smooth surface with almost invisible layers.\u003c\/p\u003e\n\u003ch4\u003eWhat is the ClearG115 bundle?\u003c\/h4\u003e\n\u003cp\u003eHeyGears offers clear PAF10 together with its UltraGlaze ClearG115 Gloss varnish to add gloss and transparency to your part. Here you can get it separately.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Transparent","offer_id":55384207688017,"sku":"DIST-6971437944080","price":55.48,"currency_code":"EUR","in_stock":true},{"title":"Volcanic grey","offer_id":55384207720785,"sku":"DIST-6971437941928","price":48.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-paf10-gris-volcanico-1kg.jpg?v=1792509643"},{"product_id":"resina-heygears-ultraprint-pap10-alto-detalle-1kg","title":"HeyGears UltraPrint PAP10 - High-Detail Resin for Reflex 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAP10: high-detail resin for miniatures and fine parts\u003c\/h2\u003e\n\u003cp\u003ePAP10 is HeyGears' resin for when detail comes first: miniatures, small-scale replicas and parts with very fine structures. It comes in a 1 kg bottle and in two colours, ash grey and black. It's part of the UltraPrint range, designed for HeyGears Reflex printers: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work with \u003cstrong\u003e385 nm\u003c\/strong\u003e light, and the Reflex RS and RS Turbo with \u003cstrong\u003e405 nm\u003c\/strong\u003e. HeyGears validates it on all of them with its own profiles.\u003c\/p\u003e\n\u003cp\u003eFirst, the important part: \u003cstrong\u003ethis is not a resin for generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen and similar). HeyGears formulates and validates it for its Reflex platform, with locked parameters in its software. If you don't own a Reflex, this resin isn't for you.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm on Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro; 405 nm on Reflex RS and RS Turbo. Only validated on HeyGears printers, not on 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine detail:\u003c\/strong\u003e minimum pillar of 0.1 mm in black and 0.15 mm in ash grey; minimum embossed detail of 0.06 mm (black figure).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStability:\u003c\/strong\u003e dimensional deviation within ±0.05 mm according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e 600 h of UV ageing (ASTM G154), which HeyGears equates to about 8 years of indoor use, with less than 30 % loss of properties and no noticeable colour change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 83 Shore D (ash grey) and 78 Shore D (black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 93-94 MPa.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not require the Pulsing Release Module.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears presents it as a high-precision application resin: end-use miniatures, small replicas and intricate parts. It's the one to put in the machine for wargaming and RPG figures, busts, small dioramas and any part with sharp edges, fine textures or thin elements such as spears, ropes or filigree.\u003c\/p\u003e\n\u003cp\u003eThe two colours have different uses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsh grey:\u003c\/strong\u003e the go-to colour for painting. Detail is easy to see and primer adheres well to a neutral tone. It's the one HeyGears recommends for painting and finishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e edges and textures stand out more to the naked eye, and it reaches the finest pillar (0.1 mm). Useful for parts that will stay unpainted or for presenting prototypes in black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBeyond miniatures, its dimensional stability and ageing resistance make it suitable for short runs of small parts that need to come out identical: HeyGears talks about small-batch production with consistent results.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003ePAP10 works on HeyGears Reflex series printers, with the HeyGears Blueprint process packages. It does not require the Pulsing Release Module (PRM).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsh grey:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e the official HeyGears store lists it for Reflex, Reflex Turbo, Reflex RS and Reflex RS Turbo. HeyGears' materials website also includes it for the Reflex 2 and 2 Pro, but warns that compatibility is being updated. If you have a Reflex 2, check that the black process package appears in Blueprint before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbout wavelength: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work at 385 nm; the Reflex RS and RS Turbo at 405 nm. HeyGears validates PAP10 on both families, always with its own profiles. That doesn't make it a resin for any 405 nm printer: outside the Reflex series there is no official profile and no guaranteed result.\u003c\/p\u003e\n\u003cp\u003eIf you use the Pulsing Release Module on a Reflex RS or RS Turbo, PAP10 is on the list of resins compatible with the RS PRM kit. Printers: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e. All other resin printers are in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. These are average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eAsh grey\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e36 J\/m\u003c\/td\u003e\n\u003ctd\u003e31 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e12 %\u003c\/td\u003e\n\u003ctd\u003e12 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3,050 J\/m²\u003c\/td\u003e\n\u003ctd\u003e2,370 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1,750 MPa\u003c\/td\u003e\n\u003ctd\u003e1,750 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1,920 MPa\u003c\/td\u003e\n\u003ctd\u003e2,490 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e54 MPa\u003c\/td\u003e\n\u003ctd\u003e55 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e93 MPa\u003c\/td\u003e\n\u003ctd\u003e94 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e58 °C\u003c\/td\u003e\n\u003ctd\u003e58 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e83 Shore D\u003c\/td\u003e\n\u003ctd\u003e78 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e385 mPa·s\u003c\/td\u003e\n\u003ctd\u003e500 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2\/2 Pro) and 405 nm (Reflex RS\/RS Turbo), always with HeyGears profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 101 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamp heat test:\u003c\/strong\u003e IEC 60068-2-78 passed according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eHeyGears doesn't publish exposure or post-curing times in the technical data sheet: the parameters are in the HeyGears Blueprint process packages, which you select when preparing the job. That's how the whole UltraPrint range works: you don't have to calibrate the resin yourself.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well. The resin performs better when warm; HeyGears actually uses PAP10 to benchmark the heated scraper on the Reflex 2, which brings it from 10 to 22 °C in 6 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e remove uncured resin with the solvent specified in the process package. With the Reflex range, the most convenient option is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e; if you wash by hand, you'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e HeyGears offers its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, with dual-wavelength curing and heat, designed for the Reflex platform. Other stations are in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePainting:\u003c\/strong\u003e with ash grey, prime directly after curing and give the support marks a light sanding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies PAP10 with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWork with nitrile gloves, safety glasses and good ventilation. If resin gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat and out of reach of children. Don't pour liquid resin down the drain: cure it in sunlight or with UV and dispose of it as solid waste in accordance with local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAP10\u003c\/strong\u003e: maximum detail and stability for miniatures and small parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: standard modelling resin, for everyday printing and prototypes that don't demand as much detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: if the part will be handled a lot (board games, articulated figures, gears), thanks to its 2H surface hardness and higher impact strength (64 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e: PVC-like miniatures that need to survive drops and bending.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: if you're after ABS-like behaviour for functional parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find all our resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins\"\u003e3D printer resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm LCD printer from another brand. There's no official profile and we don't recommend it.\u003c\/li\u003e\n\u003cli\u003eParts that need to bend or snap-fit: with 12 % elongation, it's a rigid resin.\u003c\/li\u003e\n\u003cli\u003eParts exposed to heat: its heat deflection temperature is 58 °C.\u003c\/li\u003e\n\u003cli\u003eLarge, solid parts where detail doesn't matter: there are cheaper resins for that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAP10 work on my Elegoo, Anycubic or Phrozen printer?\u003c\/h4\u003e\n\u003cp\u003eWe don't sell it for that. PAP10 is formulated for HeyGears Reflex printers (385 nm, and 405 nm on the RS and RS Turbo) and is printed with the HeyGears Blueprint process packages. There are no official parameters for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it a 385 nm or a 405 nm resin?\u003c\/h4\u003e\n\u003cp\u003eBoth, but only within the HeyGears range. The Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro cure it at 385 nm; the Reflex RS and RS Turbo at 405 nm. In both cases with HeyGears Blueprint profiles. The fact that it works on an RS at 405 nm doesn't mean it works on any 405 nm printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. It prints with the standard vat. If you already have the PRM on a Reflex RS or RS Turbo, PAP10 is among the resins compatible with that kit.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between ash grey and black?\u003c\/h4\u003e\n\u003cp\u003eAsh grey is easier to paint, slightly harder (83 vs 78 Shore D) and tougher on impact. Black defines edges more sharply and reaches 0.1 mm pillars, versus 0.15 mm for grey.\u003c\/p\u003e\n\u003ch4\u003eDoes the black work on the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eHeyGears' materials website lists it as compatible, but the official store only lists it for Reflex, Reflex Turbo, RS and RS Turbo, and HeyGears warns that it's updating compatibility. Check in Blueprint whether you have the black process package before ordering. Ash grey is listed as compatible with the Reflex 2 in every source.\u003c\/p\u003e\n\u003ch4\u003eHow long does a part printed in PAP10 last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears has subjected it to 600 h of UV ageing, which it equates to about 8 years indoors or 1 year outdoors, with less than 30 % loss of properties, no noticeable colour change and a dimensional deviation of ±0.1 mm.\u003c\/p\u003e\n\u003ch4\u003eWhere are the exposure and curing times?\u003c\/h4\u003e\n\u003cp\u003eIn the HeyGears Blueprint process packages. HeyGears doesn't publish them in the technical data sheet because the printer and software apply them directly.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for functional parts?\u003c\/h4\u003e\n\u003cp\u003eFor small, rigid parts, yes: 54-55 MPa tensile and 93-94 MPa flexural strength. For parts that will take knocks or friction, PAWR10 is a better choice.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Ash grey","offer_id":55384207884625,"sku":"DIST-6971437941584","price":57.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":55384207917393,"sku":"DIST-6971437942185","price":57.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pap10-gris-ceniza-1kg.jpg?v=1792509648"},{"product_id":"resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg","title":"HeyGears UltraPrint PAWR10 - Wear-Resistant Resin for Reflex 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAWR10: wear-resistant resin for parts that get handled\u003c\/h2\u003e\n\u003cp\u003ePAWR10 is HeyGears' resin for parts that will pass through many hands: board game tokens and figures, articulated models, BJD dolls, electronics accessories, gears and outdoor gear. Its strong point is the surface: 2H pencil hardness, which HeyGears compares to car paint, and a smooth finish straight off the printer. 1 kg bottle, in cream and cream yellow.\u003c\/p\u003e\n\u003cp\u003eIt is an UltraPrint resin for HeyGears Reflex printers: \u003cstrong\u003e385 nm\u003c\/strong\u003e on the Reflex, Reflex Turbo, Reflex 2 and 2 Pro, and \u003cstrong\u003e405 nm\u003c\/strong\u003e on the Reflex RS and RS Turbo. \u003cstrong\u003eIt is not for generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...). Without a Reflex, there's no point in buying it.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro; 405 nm on the Reflex RS and RS Turbo. Only validated on HeyGears printers, not on 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2H surface hardness\u003c\/strong\u003e (GB\/T 6739 pencil test): scratch-resistant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNotched impact:\u003c\/strong\u003e 64 J\/m, almost double that of PAP10 (31-36 J\/m) or PAU20 (35 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth surface:\u003c\/strong\u003e HeyGears describes a finish similar to a part sanded with 600 to 1000 grit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo dust from friction:\u003c\/strong\u003e the TDS states it does not shed dust under high-speed friction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistant to yellowing\u003c\/strong\u003e and to loss of properties over time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not require the Pulsing Release Module.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eA display miniature doesn't take any punishment. A board game figure, an articulated part or a housing that gets assembled and disassembled does: rubbing, knocks against the table, fingernails, other parts. PAWR10 is made for exactly that. It combines high surface hardness (2H) with more toughness than a detail resin, so the part withstands use without scratching or chipping right away.\u003c\/p\u003e\n\u003cp\u003eUses suggested by HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoard game and wargame figures and tokens that are handled every game.\u003c\/li\u003e\n\u003cli\u003eModels with moving parts and BJDs (ball-jointed dolls), where the joints rub against each other.\u003c\/li\u003e\n\u003cli\u003eConsumer electronics accessories.\u003c\/li\u003e\n\u003cli\u003eGears and contact parts.\u003c\/li\u003e\n\u003cli\u003eOutdoor gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth colours are light shades that are easy to paint. HeyGears describes it as an easy-to-paint resin, and in cream it also looks good unpainted on functional parts.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears, PAWR10 is compatible with the Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro, using the HeyGears Blueprint process packages. It does not require the Pulsing Release Module (PRM).\u003c\/p\u003e\n\u003cp\u003eAbout the light source: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work at 385 nm; the Reflex RS and RS Turbo at 405 nm. HeyGears validates it on both families with its own profiles. That doesn't make it suitable for other 405 nm printers: outside the Reflex series there is no official profile.\u003c\/p\u003e\n\u003cp\u003eIf you have the PRM on a Reflex RS or RS Turbo, PAWR10 is on the kit's list of compatible resins. Compatible printers in our shop: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. Average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePencil hardness\u003c\/td\u003e\n\u003ctd\u003eGB\/T 6739\u003c\/td\u003e\n\u003ctd\u003e2H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e64 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e4,300 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1,290 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1,300 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e34 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e58 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e52 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e81 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e2.5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e373 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e200 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2\/2 Pro) and 405 nm (Reflex RS\/RS Turbo), always with HeyGears profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e cream and cream yellow. Same technical data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 106 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e HeyGears equates its test to about 3 years indoors, with less than 30 % loss of properties, no noticeable colour change and a deviation of ±0.1 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eExposure and curing times are not in the technical data sheet: they come in the HeyGears Blueprint process packages. You select PAWR10 when preparing the print and the Reflex applies the parameters. You don't need to calibrate the resin.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle. At 373 mPa·s it's a free-flowing resin that's easy to handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e use the solvent specified in the process package. With the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e, washing involves almost no contact with the resin. For manual washing, see \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e is HeyGears' station for the Reflex platform, with dual-wavelength UV and heat. More options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticulated parts:\u003c\/strong\u003e leave clearance in the joints. Friction resistance is no substitute for well-set tolerances in the design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and these hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways use nitrile gloves, safety glasses and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat sources. Liquid resin must not go down the drain: cure it and dispose of it according to local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAWR10\u003c\/strong\u003e: functional parts that get touched, rubbed or knocked. Prioritises surface and impact resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e: finer detail (0.1-0.15 mm pillars) and more rigidity, for display miniatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e: if the part needs to bend without breaking (46 % elongation in volcanic grey).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e: structural parts and load-bearing jigs and fixtures, with 69 MPa tensile strength. Requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: standard resin for prototypes and models without demanding use requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore technical resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003eFor parts exposed to heat: heat deflection at 52 °C.\u003c\/li\u003e\n\u003cli\u003eFor parts in prolonged contact with water: it absorbs 2.5 %, more than other resins in the range.\u003c\/li\u003e\n\u003cli\u003eFor flexible or elastic parts: it's a rigid, tough resin and doesn't bend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAWR10 on a printer that isn't a HeyGears?\u003c\/h4\u003e\n\u003cp\u003eWe don't sell it for that. It's a resin for the HeyGears Reflex series (385 nm, and 405 nm on the RS and RS Turbo), with parameters in HeyGears Blueprint. There are no official profiles for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it a 385 nm or a 405 nm resin?\u003c\/h4\u003e\n\u003cp\u003eBoth, but only within the HeyGears range. The Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro cure it at 385 nm; the Reflex RS and RS Turbo at 405 nm. In both cases with HeyGears Blueprint profiles. The fact that it works on an RS at 405 nm doesn't mean it works on any 405 nm printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. It works with the standard vat. If you have the PRM on a Reflex RS or RS Turbo, it's compatible too.\u003c\/p\u003e\n\u003ch4\u003eWhat does 2H hardness mean?\u003c\/h4\u003e\n\u003cp\u003eIt's the result of the pencil hardness test (GB\/T 6739): a 2H pencil doesn't scratch the surface. HeyGears compares it to the hardness of car paint.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between cream and cream yellow?\u003c\/h4\u003e\n\u003cp\u003eOnly the colour. The technical data sheet and safety data sheet are the same for both.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for BJD dolls and articulated figures?\u003c\/h4\u003e\n\u003cp\u003eYes, HeyGears recommends it for BJD dolls and moving models because of its wear resistance and because it doesn't shed dust from friction.\u003c\/p\u003e\n\u003ch4\u003eDoes it yellow over time?\u003c\/h4\u003e\n\u003cp\u003eHeyGears presents it as resistant to yellowing. After its ageing test, equivalent to about 3 years indoors, the colour change is not noticeable (ΔE less than 2).\u003c\/p\u003e\n\u003ch4\u003eCan it be painted?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears describes it as easy to paint, and both light shades take primer well.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Cream yellow","offer_id":55384208114001,"sku":"DIST-6971437941676","price":57.99,"currency_code":"EUR","in_stock":true},{"title":"Cream","offer_id":55384208146769,"sku":"DIST-6971437941690","price":57.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pawr10-crema-1kg.jpg?v=1792509652"},{"product_id":"resina-heygears-ultraprint-paww20-lavable-al-agua-1kg","title":"HeyGears UltraPrint PAWW20 - Water Washable Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAWW20: water-washable resin for Reflex printers\u003c\/h2\u003e\n\u003cp\u003ePAWW20 is HeyGears' water-washable resin. Parts come out clean after a 2-minute rinse in water, with no isopropyl alcohol or other solvents, and post-curing takes just 5 minutes. It has a low odour, very low viscosity and decent toughness, and it leaves a smooth surface finish. It comes in translucent pink in a 1 kg bottle for HeyGears Reflex printers.\u003c\/p\u003e\n\u003cp\u003eHeyGears positions it for concept prototypes and rapid iterations, from figures to industrial parts, and for anyone who doesn't want to, or can't, work with alcohol at home.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PAWW20 is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe fact that it works on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar), nor does it guarantee results on them. If you're looking for a water-washable resin for another printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/water-washable-3d-resins\"\u003ewater-washable 3D resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater washing:\u003c\/strong\u003e a 2-minute rinse and the part comes out clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast curing:\u003c\/strong\u003e 5 minutes without heat in the UltraCraft Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery low viscosity:\u003c\/strong\u003e 64 mPa·s, with low odour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToughness:\u003c\/strong\u003e 3230 J\/m² work of fracture and 16 % elongation at break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachinable:\u003c\/strong\u003e can be drilled and tapped during the first month after printing, according to HeyGears\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth surface\u003c\/strong\u003e and good detail: 0.2 mm minimum wall and 0.15 mm gaps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Pulsing Release Module:\u003c\/strong\u003e prints with the standard vat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, translucent pink\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eFor figures, miniatures, concept prototypes and rapid-iteration parts where what matters is printing, cleaning and reviewing in a short time. Since it doesn't need alcohol, you save on the IPA container, the fumes and the cost of solvent.\u003c\/p\u003e\n\u003cp\u003eHeyGears specifically recommends it for anyone who is sensitive to the smell of alcohol or can't keep it in their workspace: a small flat, a classroom or a shared workshop. Note: water-washable doesn't mean the resin is harmless. Handle it with the same protection as any other resin, and don't pour the wash water down the drain (we explain why below).\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible according to HeyGears' compatibility table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e no. PAWW20 is not used with the Pulsing Release Module; print it with the standard resin vat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that compatibility and process packages are being updated; whatever appears in Blueprint Studio for your printer takes precedence. If you're looking for a machine, take a look at the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e5.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e25 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e16 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3230 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1450 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e32 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e58 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e49 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e80 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e64 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a deviation of ±10 %. The 5.9 % water absorption is high compared with the alcohol-washed UltraPrint resins (between 0.9 and 1.8 %): that's the price of being water-washable. In its technical data sheet, HeyGears shows a PAWW20 figure that withstands 24 hours soaking without cracking, but we wouldn't use it for parts that will be wet or in very humid environments.\u003c\/p\u003e\n\u003ch4\u003eAccuracy and design minimums\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTolerance: ±0.08 mm up to 20 mm, ±0.14 mm up to 50 mm and ±0.19 mm up to 100 mm\u003c\/li\u003e\n\u003cli\u003eMinimum wall: 0.2 mm (0.22 mm unsupported)\u003c\/li\u003e\n\u003cli\u003eMinimum gap: 0.15 mm; minimum hole and pillar: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eUnsupported angle: 20°; 0.8 mm overhang\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the vat. Slice in Blueprint Studio, selecting PAWW20. If you're not going to print within 3 days, filter the resin and return it to the bottle; don't leave it in the vat for more than 7 days, as it absorbs moisture and starts causing print failures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e rinse the part with water for 2 minutes. HeyGears recommends a first wash in used water to remove most of the resin and a second in clean water for the details. Its guide also offers an option with 95 % alcohol in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e (1 + 1 minutes at 180 rpm), but the whole point of this resin is not needing it. Dry the part thoroughly before curing it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWash water doesn't go down the drain.\u003c\/strong\u003e It contains dissolved resin and is a pollutant. HeyGears asks you not to pour it away and to follow local regulations. For its other water-washable resin, PAWW10, it explains how to handle it: let the water evaporate and cure the residue in the sun or in the curing station before disposing of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, fast mode, no heat and in air: 5 minutes at room temperature. HeyGears recommends sending the job from Blueprint. More options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure stations\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrilling and tapping:\u003c\/strong\u003e if you're going to machine the part, do it within the first month after printing, which is the timeframe HeyGears gives.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAWW20 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses even when washing with water, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and see a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: 104 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore it sealed between 15 and 28 °C, away from sunlight and moisture. Shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eNeither the liquid resin nor the wash water should go down the drain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one to choose in the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: if you don't mind using alcohol, it offers better accuracy (±0.05 mm), much lower water absorption and three colours.\u003c\/li\u003e\n\u003cli\u003ePAB10: grey, for miniatures you plan to sand and paint, with 45 J\/m impact strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, for functional parts that need to withstand impacts and some heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: if you want genuine transparency rather than translucent pink.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you use the Pulsing Release Module and don't want to go back to the standard vat.\u003c\/li\u003e\n\u003cli\u003eIf your parts will be in contact with water or moisture: it absorbs 5.9 %.\u003c\/li\u003e\n\u003cli\u003eIf you need maximum dimensional accuracy or load-bearing parts: PAS10 or PAU11 are better choices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it really wash with just water?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears specifies a 2-minute water rinse to leave the part clean, without isopropyl alcohol.\u003c\/p\u003e\n\u003ch4\u003eCan I pour the wash water down the sink?\u003c\/h4\u003e\n\u003cp\u003eNo. It contains dissolved resin. Let it evaporate, cure the residue and dispose of it according to your local council's regulations.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that PAWW20 is not used with the Pulsing Release Module. Print it with the standard resin vat.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on a 405 nm Elegoo or Anycubic?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. It works on the Reflex RS, which is 405 nm, but with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhich HeyGears printers does it work on?\u003c\/h4\u003e\n\u003cp\u003eOn the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385 nm) and on the Reflex RS and RS Turbo (405 nm).\u003c\/p\u003e\n\u003ch4\u003eHow long does it need to cure?\u003c\/h4\u003e\n\u003cp\u003e5 minutes at room temperature in the UltraCraft Cure, in fast mode and without heat.\u003c\/p\u003e\n\u003ch4\u003eDoes it smell strongly?\u003c\/h4\u003e\n\u003cp\u003eHeyGears describes it as low-odour. Even so, always work in a ventilated area.\u003c\/p\u003e\n\u003ch4\u003eCan it be drilled or tapped?\u003c\/h4\u003e\n\u003cp\u003eYes, during the first month after you print the part, according to HeyGears.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384208277841,"sku":"DIST-6971437941799","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-lavable-agua-heygears-ultraprint-paww20-rosa-1kg.jpg?v=1792509654"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/collections\/resina-heygears-ultraprint-pas10-morado-claro-1kg.jpg?v=1792585500","url":"https:\/\/mrresin.es\/en\/collections\/heygears-resins.oembed","provider":"Mr Resin","version":"1.0","type":"link"}