{"title":"HeyGears Reflex Spare Parts","description":"\u003cp\u003e\u003cstrong\u003eGenuine HeyGears spare parts\u003c\/strong\u003e for \u003cstrong\u003eReflex\u003c\/strong\u003e printers: Amber LCD screens, standard and Pulsing Release resin tanks, stainless steel build plates, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e for the Reflex 2 and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module\u003c\/a\u003e kits.\u003c\/p\u003e\u003cp\u003eThe first thing is to know which family your printer belongs to, because \u003cstrong\u003eparts are not interchangeable\u003c\/strong\u003e between the Reflex, Reflex RS and Reflex 2. Below you will find the compatibility table, when to replace each part and how to do it.\u003c\/p\u003e","products":[{"product_id":"heygears-tanque-de-resina-reflex","title":"HeyGears Reflex Resin Tank - Standard resin tank for Reflex and Reflex Turbo","description":"\u003ch2\u003eHeyGears Standard Resin Tank for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eStandard tank, without Pulsing Release, for the first generation of the Reflex. It works with the Reflex and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e, and HeyGears describes it as easy to install and swap.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e compatible with the Reflex's automatic heating. On the Turbo, the heated tray raises the resin from 10 °C to 22 °C in about 20 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Pulsing Release Module:\u003c\/strong\u003e this is the tank for printing without the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting film:\u003c\/strong\u003e HeyGears rates the Reflex film for 45,000 layers or more, and the printer lets you know when it's time to replace it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy get a second tank\u003c\/h3\u003e\n\u003cp\u003eSo you can keep one tank per resin and avoid emptying and cleaning it every time you switch materials. And if you have the Pulsing Release Module, you can print resins that aren't compatible with it without removing the Pulsing tank.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the resins HeyGears approves for the Reflex and Reflex Turbo without the module: PAS10, PARP10, PAWR10, PAP10, PAF10, PAT10, PAU10, PAU11, PAM10, PAH10 and the water-washable PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePAC10, PAE10, PAU20 and PAH270 require the Pulsing Release Module and its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003ePulsing Release tank for Reflex\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe film and the tank don't have the same lifespan. The Reflex counts the printed layers and alerts you when the film is reaching the end of its life; HeyGears sells replacement film in packs of two and has a replacement video on its wiki. Replace the whole tank if the frame gets damaged or if you want one per resin.\u003c\/p\u003e\n\n\u003ch3\u003eFilm care\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists three common causes of film damage or leaks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning by hand:\u003c\/strong\u003e use the \u003cem\u003eResin Tank Cleaning\u003c\/em\u003e function and the debris removal tool. Don't pull cured resin off with your fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured debris:\u003c\/strong\u003e check the tank before and after every print. A piece of debris pressed by the build plate can tear the film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorn film:\u003c\/strong\u003e replace it promptly when the printer alerts you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo clean the tank, use isopropyl alcohol and a lint-free cloth. You'll find them in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eFor standard, high-detail or water-washable resins, this one. For castable, elastic, tooling or high-temperature resins, you need the Pulsing Release tank with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the Reflex and Reflex Turbo.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The module requires the Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eHeating is done by the printer's tray, and HeyGears lists this tank as compatible with it.\u003c\/p\u003e\n\u003ch4\u003eHow often should the film be replaced?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Reflex film for 45,000 layers or more. The printer keeps count and alerts you.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAU20 with this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. PAU20, PAC10, PAE10 and PAH270 require the Pulsing Release module and tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS has its own resin tank.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384121082193,"sku":"DIST-6971437942048","price":106.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-de-resina-reflex.jpg?v=1792509433"},{"product_id":"heygears-ultracraft-sistema-de-purificacion","title":"HeyGears UltraCraft GreenPrint - VOC Air Purifier for Resin 3D Printing","description":"\u003ch2\u003eHeyGears UltraCraft GreenPrint: air purifier for 3D printing spaces\u003c\/h2\u003e\n\u003cp\u003eThe UltraCraft GreenPrint is a HeyGears purifier designed for the air in a room with resin printers. It targets the volatile organic compounds (VOCs) released by resin and alcohol during printing and post-processing. Instead of trapping them in a carbon filter that becomes saturated, it breaks them down through photocatalysis and a degradation reaction until only CO₂ and water remain. That's why it doesn't need expensive replacement filters: just a few dust strips that you change every few months, and they already come in the box.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC degradation by photocatalysis:\u003c\/strong\u003e destroys pollutants instead of accumulating them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 % TVOC reduction in 25 minutes\u003c\/strong\u003e in a 10 m² room (HeyGears lab data).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTVOC CADR:\u003c\/strong\u003e 34.17 m³\/h. Recommended for rooms under 30 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo carbon filters to replace:\u003c\/strong\u003e includes 10 dust strips for the pre-filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTVOC sensor\u003c\/strong\u003e with colour indicator: green, blue, yellow and red.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree speeds plus night mode\u003c\/strong\u003e, timer of up to 12 hours and control from the BlueprintGo app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect connection\u003c\/strong\u003e to Reflex 2 and Reflex 2 Pro via an air duct.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eIf you print in resin at home or in an office, you know the smell that lingers in the room. That smell is VOCs, and with several printers running at once the concentration rises quickly. The GreenPrint works continuously. In HeyGears' test, with emissions equivalent to more than three printers, it brought the concentration back down to around 0,3 mg\/m³ in about two hours and kept it there.\u003c\/p\u003e\n\u003cp\u003eThe difference from a household carbon-filter purifier is maintenance. According to HeyGears, a conventional purifier lost around 30 % of its effectiveness in their 52-day test because the filter becomes saturated, while the GreenPrint lost 5.8 % over the same period and then stabilises. It's for small workshops, studios and hobbyists who print in a poorly ventilated room, especially if they have more than one printer.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAs a room purifier, it works with any printer: it cleans the air in the room, not inside a specific machine. HeyGears sells it for its Reflex series (Reflex, Reflex Turbo, Reflex RS and Reflex RS Turbo).\u003c\/p\u003e\n\u003cp\u003eWith the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e and the Reflex 2 there's an extra option: both have a port on the rear panel reserved for the purifier, and you can connect them with an air duct to extract air directly from the print chamber. The duct and connector parts are not included. HeyGears publishes the part files (so you can print them on the Reflex itself) and the list of everything else: a collapsible duct with a 40 mm inner diameter and about 1.2 m long, four 2,9 × 6.5 mm screws and PET tape or clear tape. The Pulsing Release Module is not required.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e270 × 270 × 520 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e24 V ⎓ 3,5 A (adapter included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e84 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeeds\u003c\/td\u003e\n\u003ctd\u003e3 + night mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e47-60 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVOC CADR\u003c\/td\u003e\n\u003ctd\u003e34.17 m³\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended area\u003c\/td\u003e\n\u003ctd\u003eunder 30 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWi-Fi\u003c\/td\u003e\n\u003ctd\u003e2,4 GHz only, BlueprintGo app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003epurifier, 10 dust strips, power adapter, power cable, quick guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSetup and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnboxing:\u003c\/strong\u003e remove the four foam strips from the top and the tape from the rear cover. Open the cover, take out the inner foam and remove the bags from the two photocatalytic modules. Reinstall them in order (number 2 at the bottom and number 1 at the top), connect their power and close the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower on:\u003c\/strong\u003e it starts at speed 2 and runs a 180-second warm-up with a countdown. It then displays the TVOC concentration, speed and timer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp:\u003c\/strong\u003e press and hold the power and speed buttons together for two seconds and add the device as \"Purification Unit\" in BlueprintGo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust strips:\u003c\/strong\u003e HeyGears recommends replacing them every 3-6 months. Wrap them around the photocatalytic module with the velvety side facing out, covering the entire air intake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay codes:\u003c\/strong\u003e E0, rear cover not closed properly. E1, the unit is not upright. EE, check the photocatalytic module cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlace it on the floor, upright and on a level surface. Switch it off and unplug it before opening the rear cover or setting up the direct connection to the printer. A purifier helps, but it doesn't replace ventilation, gloves or protective equipment when handling resin.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eThe GreenPrint completes the Reflex series workstation alongside the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e: one washes, one cures and this one cleans the air in the room. If you have a Reflex 2 or Reflex 2 Pro, the direct connection is well worth setting up. With printers from other brands it works just the same, as a room purifier.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you print in a space larger than 30 m² or in a warehouse: it won't be enough.\u003c\/li\u003e\n\u003cli\u003eIf you're looking for a particle filter for FDM or laser machines: HeyGears designs it for VOCs and publishes no data on fine particles or smoke.\u003c\/li\u003e\n\u003cli\u003eIf you expect it to completely eliminate the need for ventilation: it reduces VOCs, but ventilation is still recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it need replacement filters?\u003c\/h4\u003e\n\u003cp\u003eIt has no carbon filters. You only need to replace the dust strips every 3-6 months, and 10 come in the box.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with printers from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes. As a room purifier, it cleans the air in the room regardless of the printer. The direct duct connection is only designed for Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eWhat do I need to connect it to the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eA collapsible duct with a 40 mm inner diameter, four 2,9 × 6.5 mm screws, PET or clear tape and four connector parts that HeyGears provides as printable files. You open the port on the printer's rear panel and connect it to the purifier.\u003c\/p\u003e\n\u003ch4\u003eWhat area does it cover?\u003c\/h4\u003e\n\u003cp\u003eHeyGears recommends it for rooms under 30 m². The 92 % reduction in 25 minutes figure was measured in 10 m².\u003c\/p\u003e\n\u003ch4\u003eIs it noisy?\u003c\/h4\u003e\n\u003cp\u003eBetween 47 and 60 dB(A) depending on the speed. It has a night mode for when you're not printing.\u003c\/p\u003e\n\u003ch4\u003eCan I control it from my phone?\u003c\/h4\u003e\n\u003cp\u003eYes, with the BlueprintGo app. It only connects to 2,4 GHz Wi-Fi networks.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384201888081,"sku":"DIST-6971437942963","price":584.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-ultracraft-greenprint-purificador-aire-resina.jpg?v=1792509519"},{"product_id":"heygears-pulsing-release-module-kit-reflex-rs","title":"HeyGears Pulsing Release Module Kit for Reflex RS and RS Turbo - Module + Heated Vat","description":"\u003ch2\u003ePulsing Release Module Kit for Reflex RS and RS Turbo\u003c\/h2\u003e\n\u003cp\u003eOfficial HeyGears kit for fitting the pulsing release module to a \u003cstrong\u003eReflex RS or Reflex RS Turbo\u003c\/strong\u003e. It includes the two parts you need: the module and the vat that works with it. The module inflates and deflates the vat film in cycles, cutting the peel force on each layer by around 50 %. With less force, your print needs fewer supports.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pulsing Release Module (first generation).\u003c\/li\u003e\n\u003cli\u003e1 Reflex RS Heated \u0026amp; Pulsing Release vat: heated and fitted with pulsing film.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e and Reflex RS. Neither comes with it as standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro, which use the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2\u003c\/a\u003e. For Reflex and Reflex Turbo there is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003eReflex kit\u003c\/a\u003e, with a different vat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn the RS the module is optional. HeyGears lists it as compatible with PARP10, PAS10, PAP10, PAWR10, PAF10 and PAU11, and it does not work with the water-washable PAWW10 and PAWW20. The resins that require it on other Reflex models (PAC10, PAE10, PAU20, PAH270) are not listed as compatible with the RS, even with the module. It is also not recommended for walls of 3 mm or less.\u003c\/p\u003e\n\n\u003ch3\u003eWhat you gain\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBetween 20 % and 60 % fewer supports.\u003c\/li\u003e\n\u003cli\u003eBetween 25 % and 54 % less support contact area: less sanding.\u003c\/li\u003e\n\u003cli\u003eMore leeway with complex models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are HeyGears figures with PAS10 on a large model. The vat heats the resin from 10 °C to 22 °C in about 20 minutes and keeps it there.\u003c\/p\u003e\n\n\u003ch3\u003eModule specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC. Power: 25 W.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm. Weight: 3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003eThe module sits next to the printer and connects to the rear port with its air tube and cable. You swap the standard vat for the pulsing vat and select the module in Blueprint Studio when you create the project. The vat also works without the module to heat the resin: in Blueprint Studio, select \"No Add-on Module\". The wear part is the film: when it gets scratched or leaks resin, you replace the RS pulsing film, not the kit. If the vat gets damaged, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eRS pulsing vat\u003c\/a\u003e is available separately.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eNo. The Reflex 2 and Reflex 2 Pro only work with the Pulsing Release Module 2.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference from the Reflex kit?\u003c\/h4\u003e\n\u003cp\u003eThe module is the same; the vat is different. This kit comes with the RS heated vat, which doesn't fit the Reflex.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAC10 or PAE10 on the RS with the kit?\u003c\/h4\u003e\n\u003cp\u003eNot according to HeyGears' table: those resins are not listed as compatible with the RS. For them, there's the Reflex Turbo or the Reflex 2 Pro with its module.\u003c\/p\u003e\n\u003ch4\u003eCan I use the vat without the module?\u003c\/h4\u003e\n\u003cp\u003eYes, as a heated vat, by selecting \"No Add-on Module\" in Blueprint Studio.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with water-washable resins?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears advises against using it with PAWW10 and PAWW20.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202051921,"sku":"DIST-21026971437942109","price":815.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-kit-reflex-rs.jpg?v=1792509522"},{"product_id":"heygears-pulsing-release-module-kit-reflex","title":"HeyGears Pulsing Release Module Kit for Reflex and Reflex Turbo - Module + Tank","description":"\u003ch2\u003ePulsing Release Module Kit for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eOfficial HeyGears kit for adding the pulsing release module to a \u003cstrong\u003eReflex or Reflex Turbo\u003c\/strong\u003e. It includes the module and the matching vat. The module inflates and deflates the vat film in cycles, reducing the peel force on each layer by around 50 %. On these printers, it's the key to HeyGears' most demanding engineering resins.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pulsing Release Module (first generation).\u003c\/li\u003e\n\u003cli\u003e1 Reflex Pulsing Release vat with automatic heating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. Neither comes with it as standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex RS and RS Turbo, which use a different vat. For those printers, choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003eRS kit\u003c\/a\u003e. Not compatible with Reflex 2 or Reflex 2 Pro either, which use the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eResins\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for:\u003c\/strong\u003e \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e. Without the module, you can't print them on the Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional\u003c\/strong\u003e with all other Reflex resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the water-washable resins PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot recommended for walls of 3 mm or thinner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you gain\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears, you get 25 % fewer supports and up to 20 % faster prints with some resins (data based on PAU10). Fewer supports mean less wasted resin and less sanding.\u003c\/p\u003e\n\n\u003ch3\u003eModule specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003eThe module sits next to the printer and connects to its rear port via the air tube and cable. Swap the standard vat for the pulsing vat, then select the module in Blueprint Studio when you create your project. HeyGears sells a dedicated screen tape for printing with the pulsing vat on the Reflex.\u003c\/p\u003e\n\u003cp\u003eThe consumable part is the vat film. If it gets scratched or leaks resin, you replace the film, not the whole kit. If the vat itself gets damaged, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003eReflex pulsing vat\u003c\/a\u003e is available separately.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need it to print PAC10 or PAE10?\u003c\/h4\u003e\n\u003cp\u003eYes. On the Reflex and Reflex Turbo, PAC10, PAE10, PAU20 and PAH270 can only be printed with the module.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference from the RS kit?\u003c\/h4\u003e\n\u003cp\u003eThe module is the same; only the vat is different. Each vat only fits its own printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eNo. The Reflex 2 series uses the Pulsing Release Module 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with water-washable resins?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears advises against using it with PAWW10 and PAWW20.\u003c\/p\u003e\n\u003ch4\u003eDoes the Reflex Turbo come with the module?\u003c\/h4\u003e\n\u003cp\u003eNo. No Reflex includes it in the box. It's sold separately.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202182993,"sku":"DIST-21026971437942055","price":768.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-kit-reflex-turbo.jpg?v=1792509526"},{"product_id":"heygears-pulsing-release-module-kit-reflex-2","title":"HeyGears Pulsing Release Module 2 Kit for Reflex 2 and Reflex 2 Pro - Module + Tank","description":"\u003ch2\u003ePulsing Release Module 2 Kit for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eComplete HeyGears kit for adding pulsing release to a \u003cstrong\u003eReflex 2 or Reflex 2 Pro\u003c\/strong\u003e: it includes the second-generation module and the pulsing tank. The module inflates and deflates the tank film in cycles, reducing the peel force on each layer by around 50 %. It's the option for you if you have neither of the two parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pulsing Release Module 2.\u003c\/li\u003e\n\u003cli\u003e1 Pulsing Release tank for the Reflex 2 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you already have the tank, all you need is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003ePulsing Release Module 2 without tank\u003c\/a\u003e. If you're only missing the tank, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 pulsing tank\u003c\/a\u003e is also available.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. Neither includes it in the box: they come with the standard tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex RS and RS Turbo, which use the first-generation module (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003eReflex kit\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003eRS kit\u003c\/a\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eResins\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for:\u003c\/strong\u003e \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e and PAE20.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional\u003c\/strong\u003e with all other Reflex resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImprovements over the first module\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore precise pulse control and better surface finish on pillars of 1 mm or less.\u003c\/li\u003e\n\u003cli\u003eFewer layer lines on walls of 3 mm or less.\u003c\/li\u003e\n\u003cli\u003eBetween 20 % and 60 % fewer supports.\u003c\/li\u003e\n\u003cli\u003eCritical support angle from 15°.\u003c\/li\u003e\n\u003cli\u003eBetween 25 % and 54 % less sanding time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eModule specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC. Power: 25 W.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm. Weight: 3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eOn the tank, remove the protective film from the base and the four dust stickers from the air channels. Do not remove the two bottom tapes. On the module, open the filter cover, take out the cotton and the rubber plug, and close it again. With the printer switched off, connect the air tube and the cable at the back. Switch it on, fit the tank, scraper and build plate, and select the module in Blueprint Studio when creating the project. When printing, the printer detects the module automatically. The part that wears with use is the tank film, which HeyGears sells separately.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eKit or module without tank?\u003c\/h4\u003e\n\u003cp\u003eThe kit includes the module and the tank. The module without tank is just the device, for those who already have the Reflex 2 pulsing tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with my Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. For the RS there's the first-generation kit with its heated tank.\u003c\/p\u003e\n\u003ch4\u003eDoes the Reflex 2 Pro come with it as standard?\u003c\/h4\u003e\n\u003cp\u003eNo. It comes with the standard tank and the heated scraper; the module is sold separately.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAWW20 with the module fitted?\u003c\/h4\u003e\n\u003cp\u003eNo. For water-washable resins, use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eWhat wears out with use?\u003c\/h4\u003e\n\u003cp\u003eThe tank film. When it gets scratched or leaks resin, you replace the film or the tank, not the module.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202707281,"sku":"DIST-21026971437943519","price":815.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-2-kit-reflex-2.jpg?v=1792509531"},{"product_id":"heygears-pulsing-release-module-reflex-2-sin-tanque","title":"HeyGears Pulsing Release Module 2 for Reflex 2 and Reflex 2 Pro - Module without Tank","description":"\u003ch2\u003ePulsing Release Module 2 for Reflex 2 and Reflex 2 Pro, without tank\u003c\/h2\u003e\n\u003cp\u003eThis is \u003cstrong\u003eonly the module\u003c\/strong\u003e: the HeyGears Pulsing Release Module 2, \u003cstrong\u003ewithout tank\u003c\/strong\u003e. To work, it needs the Reflex 2 series Pulsing Release tank. If you don't have one, go for the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e, which includes both parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included and what's not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 Pulsing Release Module 2 (the unit that generates the air pulses).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e the tank. It's available separately as the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 pulsing tank\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt makes sense if you already have the tank, if you're setting up the system on a second Reflex 2 with its own tank, or if you need to replace the module.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, with the Reflex 2 series Pulsing Release tank. Neither comes with the module as standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex RS and RS Turbo, which use the first-generation module (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003eReflex kit\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003eRS kit\u003c\/a\u003e).\u003c\/li\u003e\n\u003cli\u003e\nIt does \u003cstrong\u003enot\u003c\/strong\u003e work with the standard Reflex 2 tank: the module inflates and deflates the film of a tank specifically designed for it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eIt reduces the peel force of each layer from the film by around 50 %. According to HeyGears, it allows 20 % to 60 % fewer supports, support angles from 15° and a better surface finish on fine pillars and thin walls. On the Reflex 2 and 2 Pro it is \u003cstrong\u003erequired\u003c\/strong\u003e for \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e and PAE20, and it is not compatible with the water-washable resins PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC. Power: 25 W.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm. Weight: 3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBefore first use, open the module's filter cover, remove the cotton and the rubber plug, and close it again. With the printer switched off, connect the air tube and the power cable at the back, paying attention to the connector slot. Switch on, fit the pulsing tank, the scraper and the build plate, and select the module in Blueprint Studio when creating the project. The printer automatically checks that it's connected when the print starts.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between this module and the kit?\u003c\/h4\u003e\n\u003cp\u003eThe kit includes the module and the pulsing tank. This product is the module only and needs a Reflex 2 pulsing tank that you already have or buy separately.\u003c\/p\u003e\n\u003ch4\u003eCan I use it with the standard Reflex 2 tank?\u003c\/h4\u003e\n\u003cp\u003eNo. It only works with the Reflex 2 series Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex RS or the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. Those printers use the first-generation module.\u003c\/p\u003e\n\u003ch4\u003eDoes the Reflex 2 Pro come with it as standard?\u003c\/h4\u003e\n\u003cp\u003eNo. It comes with the standard tank; the module and pulsing tank are sold separately.\u003c\/p\u003e\n\u003ch4\u003eDo I need it to print PAC10?\u003c\/h4\u003e\n\u003cp\u003eYes. On the Reflex 2 series, PAC10, PAE10, PAU20, PAH270 and PAE20 can only be printed with the module.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202936657,"sku":"DIST-6971437943519","price":584.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-2-sin-tanque-reflex-2.jpg?v=1792509537"},{"product_id":"heygears-pantalla-lcd-reflex-2","title":"HeyGears Reflex 2 Series LCD Screen - 10.7\" Replacement LCD Screen for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears LCD Screen for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the official HeyGears replacement LCD screen for the Reflex 2 series: 10.7 inches, with an anti-scratch film and the screen tape pre-applied at the factory. It fits both the Reflex 2 and the Reflex 2 Pro, which share the same 10.7\" screen and a 230 × 144 mm build area.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e HeyGears Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10.7 inches, with anti-scratch film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-applied tape:\u003c\/strong\u003e no need to stick it on by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e modular design, secured with six screws and a T-handle wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich screen does the Reflex 2 series use?\u003c\/h3\u003e\n\u003cp\u003eThe Reflex 2 and Reflex 2 Pro ship with the Amber Screen Pro. According to HeyGears, it keeps contrast and light transmittance within 10% deviation after 6,000 printing hours (around 12 months at 16 hours a day). It uses a large-molecule liquid crystal layer and dyed polarizers that are more UV-resistant, and withstands 10,000 cycles at 40 kg without damage thanks to reinforced support pillars.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eReplace it if the screen is broken, scratched or not projecting properly. To check, HeyGears recommends placing a sheet of white paper on top, going into settings and running \u003cem\u003eTray Cleaning\u003c\/em\u003e, which projects an image across the entire surface. If you see dead areas, lines or spots, it's time to inspect it.\u003c\/p\u003e\n\n\u003ch3\u003eHow to install it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurn off the printer and unplug it from the power supply.\u003c\/li\u003e\n\u003cli\u003eRemove the rubber plugs with tweezers or a flat-head screwdriver.\u003c\/li\u003e\n\u003cli\u003eLoosen the six screws one by one with the T-handle wrench and remove them. Do not use an electric screwdriver.\u003c\/li\u003e\n\u003cli\u003eTake out the old screen without dropping screws or debris inside.\u003c\/li\u003e\n\u003cli\u003ePeel off the bottom protective film from the new screen, connect it, put it in place and remove the front film.\u003c\/li\u003e\n\u003cli\u003eWith the paper on top, power on and run \u003cem\u003eTray Cleaning\u003c\/em\u003e. If the image looks good, power off and tighten the screws with their washers.\u003c\/li\u003e\n\u003cli\u003eRefit the plugs and clean the screen with glass cleaner and a lint-free cloth, always wiping in one direction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eBefore fitting the vat, make sure there's nothing on the screen. If resin spills, use alcohol on a lint-free cloth and wipe in one direction only. You'll find isopropyl alcohol in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eEach Reflex family has its own screen and they are not interchangeable. For the Reflex RS and RS Turbo (10.3\"), choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex-rs\"\u003eAmber screen for Reflex RS\u003c\/a\u003e; for the Reflex and Reflex Turbo, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex\"\u003eAmber screen for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt doesn't fit the Reflex, Reflex Turbo, Reflex RS or RS Turbo, or printers from other brands. If you're not comfortable with a screwdriver, it's best to have someone experienced do it.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it fit the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it for the entire Reflex 2 series: Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eDo I need to buy screen tape separately?\u003c\/h4\u003e\n\u003cp\u003eNo. The screen comes with the tape already applied.\u003c\/p\u003e\n\u003ch4\u003eDoes it need to be calibrated with any tool?\u003c\/h4\u003e\n\u003cp\u003eThe official replacement guide for the Reflex 2 series doesn't require a calibration tool. It ends with the image test and cleaning.\u003c\/p\u003e\n\u003ch4\u003eHow long does it last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Amber Screen Pro of the Reflex 2 series at over 6,000 printing hours. Actual lifespan depends on usage.\u003c\/p\u003e\n\u003ch4\u003eCan I replace it myself?\u003c\/h4\u003e\n\u003cp\u003eYes, if you follow the steps carefully: printer powered off, screws removed with the T-handle wrench and an image test before tightening.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on a Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS uses a different 10.3-inch screen.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203067729,"sku":"DIST-6971437943410","price":317.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pantalla-lcd-reflex-2-recambio.jpg?v=1792509539"},{"product_id":"heygears-pantalla-lcd-amber-reflex-rs","title":"HeyGears Reflex RS Amber LCD Screen - Replacement Amber Screen for Reflex RS and RS Turbo","description":"\u003ch2\u003eHeyGears Amber Screen for Reflex RS and Reflex RS Turbo\u003c\/h2\u003e\n\u003cp\u003eReplacement Amber LCD screen for the Reflex RS family. On the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e it's the screen fitted at the factory, so it's a direct replacement. On the Reflex RS, which ships with a standard LCD, it's an upgrade: HeyGears also sells the RS in a \"with Amber Screen\" version.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the Amber screen is\u003c\/h3\u003e\n\u003cp\u003e\"Amber\" is the name HeyGears gives to its in-house LCD designed for the Reflex printers. According to the manufacturer, this is what sets it apart:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e566:1 contrast ratio\u003c\/strong\u003e, thanks to a composite design with a dyed polarizer and optical films.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarizer dyed with dye macromolecules:\u003c\/strong\u003e better control of the light passing through, with less overexposure and underexposure, and sharper edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical film that lets light through at 90°:\u003c\/strong\u003e less stray light on the layer being cured and cleaner surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger lifespan:\u003c\/strong\u003e these molecules withstand UV and heat better, contrast degrades less, and HeyGears quotes over 1 million printed layers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe official Amber screen set for the RS includes the screen with its tempered glass protector already fitted and two LCD screen tapes.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex RS Turbo and Reflex RS (10.3\" screen).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 or Reflex 2 Pro. Each family has its own screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e the screen doesn't require it. If you print with the module, HeyGears offers a dedicated screen tape for it (\u003cem\u003ePulsing Screen Tape\u003c\/em\u003e); check which one you're fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eIf it's cracked or scratched, if it projects uncured areas, or if you have an RS with the standard screen and want more contrast and a longer lifespan.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and calibration\u003c\/h3\u003e\n\u003cp\u003eHeyGears asks you to follow the instructions carefully and, if needed, seek professional help. The official \u003cem\u003eReflex RS Amber Screen Installation\u003c\/em\u003e video is available on the HeyGears wiki and in the Blueprint Studio help center. After the swap, the RS reads the new screen's calibration data via NFC and adjusts the light intensity to keep variations below 5 %. HeyGears also sells a kit with an LED calibration tool to calibrate uniformity and intensity.\u003c\/p\u003e\n\u003cp\u003eTo protect it, there's the screen protector for Reflex RS, and to replace the tape, the Reflex RS screen tape.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex or Reflex Turbo, yours is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex\"\u003eAmber screen for Reflex\u003c\/a\u003e. If you have a Reflex 2 or 2 Pro, you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-reflex-2\"\u003eReflex 2 series LCD screen\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eCan I fit the Amber screen to a regular Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it for the Reflex RS Turbo and Reflex RS.\u003c\/p\u003e\n\u003ch4\u003eWhat do I gain over the standard screen?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears: 566:1 contrast, sharper edges, less stray light and a longer lifespan.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a tempered glass protector?\u003c\/h4\u003e\n\u003cp\u003eYes, the official set comes with the tempered protector already fitted and two screen tapes.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate it?\u003c\/h4\u003e\n\u003cp\u003eThe RS adjusts the intensity using the new screen's NFC data. For a full calibration, HeyGears offers an LED calibration module.\u003c\/p\u003e\n\u003ch4\u003eDo I need it to use the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The module works with the Pulsing Release tank, not with the screen.\u003c\/p\u003e\n\u003ch4\u003eHow long does it last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears quotes over 1 million printed layers. It depends on usage and how well you look after it.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203133265,"sku":"DIST-6971437942444","price":236.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pantalla-amber-reflex-rs.jpg?v=1792509540"},{"product_id":"heygears-pantalla-lcd-amber-reflex","title":"HeyGears Reflex Amber LCD Screen - Replacement Amber Screen for Reflex and Reflex Turbo","description":"\u003ch2\u003eHeyGears Amber Screen for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eReplacement Amber LCD screen for the first-generation Reflex. On the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e it's the factory-fitted screen, so it's a direct replacement. On the original Reflex it's an upgrade over the stock screen.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the Amber screen\u003c\/h3\u003e\n\u003cp\u003e\"Amber\" is the name HeyGears gives to its in-house LCD design for the Reflex printers. For the RS version, HeyGears explains that it combines a dyed polarizer and optical films to boost contrast and improve UV resistance. For the Reflex Amber screen, it gives two specific figures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22% more contrast\u003c\/strong\u003e than the previous Reflex screen.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2.5 times longer lifespan.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt's the same upgrade advertised for the Reflex Turbo, whose spec sheet lists it as a 9.25-inch Amber screen.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe official set includes the Amber screen with the tempered glass protector already fitted and two LCD screen tapes.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e HeyGears Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith the Pulsing Release Module:\u003c\/strong\u003e the screen works just the same, but HeyGears states that if you use the module, the screen tape must be the compatible version (\u003cem\u003eReflex Pulsing LCD Screen Tape\u003c\/em\u003e), designed for printing with the Pulsing Release tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCalibration: don't skip it\u003c\/h3\u003e\n\u003cp\u003eHeyGears warns that the LED calibration tool is essential for replacing the screen on the Reflex and recommends buying it if you don't have one. Its wiki has videos on uniformity and light intensity calibration. If you don't have the tool, ask us before ordering the screen.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eIf the screen is broken, scratched or leaves uncured areas, or if you have an original Reflex and want more contrast and a longer lifespan.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eHeyGears asks you to follow the instructions carefully and seek professional help if needed. The \u003cem\u003eReflex Amber Screen Installation\u003c\/em\u003e video is on the official wiki, under \"Maintenance \u0026amp; Part Replacement\". Always work with the printer switched off.\u003c\/p\u003e\n\u003cp\u003eTo protect your new screen, there's the tempered glass protector for Reflex, which is fitted using the Reflex screen tape.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex RS or RS Turbo, yours is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex-rs\"\u003eAmber screen for Reflex RS\u003c\/a\u003e. For Reflex 2 and 2 Pro, it's the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-reflex-2\"\u003eReflex 2 series LCD screen\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the original Reflex?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears sells it for the Reflex and Reflex Turbo.\u003c\/p\u003e\n\u003ch4\u003eWhat does it improve over the Reflex stock screen?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, 22% more contrast and a 2.5 times longer lifespan.\u003c\/p\u003e\n\u003ch4\u003eDo I need the LED calibration tool?\u003c\/h4\u003e\n\u003cp\u003eHeyGears considers it essential for replacing the screen on the Reflex.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a tempered glass protector?\u003c\/h4\u003e\n\u003cp\u003eYes, it comes pre-fitted. It also includes two screen tapes.\u003c\/p\u003e\n\u003ch4\u003eI use the Pulsing Release Module. Does anything change?\u003c\/h4\u003e\n\u003cp\u003eOnly the screen tape: HeyGears specifies the version compatible with the module.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS has its own Amber screen, in a different size.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203231569,"sku":"DIST-6971437942437","price":246.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pantalla-amber-reflex.jpg?v=1792509542"},{"product_id":"heygears-tanque-pulsing-release-reflex-rs","title":"HeyGears Reflex RS Heated \u0026 Pulsing Release Resin Tank - Heated Pulsing Release Tank for Reflex RS and RS Turbo","description":"\u003ch2\u003eHeyGears Heated \u0026amp; Pulsing Release Resin Tank for Reflex RS and RS Turbo\u003c\/h2\u003e\n\u003cp\u003eHeyGears calls it the \u003cem\u003eReflex RS Heated \u0026amp; Pulsing Release Resin Tank\u003c\/em\u003e, and it's a 2-in-1 tank: it heats the resin on its own and, if you have the Pulsing Release Module, it also handles pulsed peeling. On the Reflex RS and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e, it's also the only tank that works with automatic resin heating.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in heating:\u003c\/strong\u003e brings the resin from 10 °C to 22 °C in about 20 minutes and keeps it there throughout the print (HeyGears figure).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release:\u003c\/strong\u003e only with the Pulsing Release Module connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks without the module too:\u003c\/strong\u003e as a standard heated tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow Pulsing Release works\u003c\/h3\u003e\n\u003cp\u003eThe module periodically inflates and deflates the tank film. This cycle of positive and negative pressure reduces the peel force of each layer by around 50 %. According to HeyGears, with PAS10 this means between 20 % and 60 % fewer supports and between 25 % and 54 % less contact area.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Pulsing Release Module\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith the module:\u003c\/strong\u003e connect the Pulsing Release Module and select the module when slicing in Blueprint Studio. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003ePulsing Release Module kit for Reflex RS\u003c\/a\u003e already includes a tank like this one; this standalone tank works as a second tank or a replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithout the module:\u003c\/strong\u003e in Blueprint Studio, select \"No Add-on Module\" and the RS will enable heating automatically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResins compatible with the module on the RS:\u003c\/strong\u003e HeyGears lists PARP10, PAS10, PAP10, PAWR10, PAF10 and PAU11. The water-washable resins PAWW10 and PAWW20 are not compatible with the module.\u003c\/li\u003e\n\u003cli\u003eHeyGears does not recommend using the module for models with walls of 3 mm or less.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex, Reflex Turbo or the Reflex 2 series: each family has its own tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cp\u003eThe film and the tank don't have the same lifespan: if only the film fails, replace it with the Pulsing Release film set for Reflex RS. Replace the complete tank if the frame gets damaged or if you want one tank per resin so you don't have to keep emptying it.\u003c\/p\u003e\n\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the resin before and after every print. A leftover cured fragment can tear the film when the platform lowers.\u003c\/li\u003e\n\u003cli\u003eTo clean out residue, use the \u003cem\u003eResin Tank Cleaning\u003c\/em\u003e function and the residue tool that comes with the printer. Don't pull cured resin off by hand.\u003c\/li\u003e\n\u003cli\u003eThe official installation videos for the tank and the module on the RS are available on the HeyGears wiki.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eThe standard Reflex RS tank is cheaper, but it doesn't heat and doesn't support the module. If you print in a cold workshop or want to try Pulsing Release later on, this is the one to get.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to use it?\u003c\/h4\u003e\n\u003cp\u003eNo. Without the module, it works as a heated tank when you select \"No Add-on Module\" in Blueprint Studio.\u003c\/p\u003e\n\u003ch4\u003eDoes the standard RS tank heat the resin?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that automatic heating on the RS requires this tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex or Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. For those printers, there's the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003ePulsing Release tank for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eCan I use PAWW10 or PAWW20?\u003c\/h4\u003e\n\u003cp\u003eNot with the module active. HeyGears lists them as not compatible with the Pulsing Release Module.\u003c\/p\u003e\n\u003ch4\u003eCan the film be replaced on its own?\u003c\/h4\u003e\n\u003cp\u003eYes, it's sold separately in a pack of two.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take to heat up?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, from 10 °C to 22 °C in about 20 minutes.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203329873,"sku":"DIST-6971437942109","price":234.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-calefactado-pulsing-release-reflex-rs_313ec633-db7e-45ab-890a-56e38bc91cfc.jpg?v=1792509545"},{"product_id":"heygears-tanque-pulsing-release-reflex-2","title":"HeyGears Reflex 2 Series Pulsing Release Resin Tank - Pulsing Release Tank for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears Pulsing Release Tank for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the tank the Pulsing Release Module 2 needs to work on the Reflex 2 series. HeyGears states that the module must always be used with this tank: the standard Reflex 2 tank does not support pulse printing. It fits the Reflex 2 and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e Pulsing Release Module 2. The first-generation module is for the Reflex and RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEssential for:\u003c\/strong\u003e PAC10, PAE10, PAU20 and PAH270 on the Reflex 2 series, which HeyGears only allows with the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e easy to fit and swap, according to HeyGears.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat the Pulsing Release Module 2 does\u003c\/h3\u003e\n\u003cp\u003eThe module inflates and deflates the tank film to release each layer with roughly 50 % less force. HeyGears cites up to 60 % fewer supports, up to 54 % less contact area, pillars of 1 mm or less with a better finish, and thin walls of 3 mm or less with fewer layer lines.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you buy the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003ePulsing Release Module 2 without tank\u003c\/a\u003e, you need this tank.\u003c\/li\u003e\n\u003cli\u003eIf you buy the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit for Reflex 2\u003c\/a\u003e, one is already included; this one works as a second tank or a replacement.\u003c\/li\u003e\n\u003cli\u003eResins that require the module: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the module: PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e. Use the standard tank for these.\u003c\/li\u003e\n\u003cli\u003eNot suitable for the Reflex, Reflex Turbo, RS or RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTake the tank out, peel off the protective film on the back and remove the four dust-protection stickers from the air inlets.\u003c\/li\u003e\n\u003cli\u003eDo not remove the two tapes on the air channels on the underside.\u003c\/li\u003e\n\u003cli\u003eWith the printer switched off, connect the air tube and the module cable. Switch on and fit the tank, scraper and build plate.\u003c\/li\u003e\n\u003cli\u003eIn Blueprint Studio, create the project selecting the Pulsing Release Module. When printing, the machine checks that the module is connected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaintenance and when to replace it\u003c\/h3\u003e\n\u003cp\u003eCheck for cured residue before and after every print: it damages the film when the build plate lowers. HeyGears sells the Reflex 2 series Pulsing Release film separately, so you only need to replace the whole tank if the frame gets damaged or if you want one tank per resin. To heat the resin, the Reflex 2 series uses the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you only use standard, high-detail or water-washable resins, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex-2\"\u003estandard Reflex 2 tank\u003c\/a\u003e is all you need. If you are going to print castable, elastic, tooling or high-temperature resins, you need this tank with the module.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex RS Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The Reflex 2 series uses the Pulsing Release Module 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes, HeyGears lists it as compatible with the Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAH270 without this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears requires the Pulsing Release Module 2 for PAH270, and the module requires this tank.\u003c\/p\u003e\n\u003ch4\u003eWhat about water-washable resins?\u003c\/h4\u003e\n\u003cp\u003ePAWW10 and PAWW20 are not compatible with the module. Use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eCan I remove the tapes on the underside?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that the two tapes on the air channels must stay in place.\u003c\/p\u003e\n\u003ch4\u003eCan the film be replaced?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears sells it separately in a pack of two.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203428177,"sku":"DIST-6971437943458","price":234.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-pulsing-release-reflex-2.jpg?v=1792509546"},{"product_id":"heygears-tanque-pulsing-release-reflex","title":"HeyGears Reflex Pulsing Release Resin Tank - Pulsing Release Tank for Reflex and Reflex Turbo","description":"\u003ch2\u003eHeyGears Pulsing Release Tank for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eResin tank with Pulsing Release film for the first-generation Reflex. This is the tank the UltraCraft Pulsing Release Module works with on the Reflex and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. HeyGears states that the module must be used with this tank (or with the RS tank, on the RS).\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e UltraCraft Pulsing Release Module (first generation). The Reflex 2 series uses Module 2 and a different tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e HeyGears lists it as compatible with the Reflex's automatic heating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for:\u003c\/strong\u003e PAC10, PAE10, PAU20 and PAH270 on the Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat the Pulsing Release Module does\u003c\/h3\u003e\n\u003cp\u003eThe module periodically inflates and deflates the tank film. This cycle reduces the peel force of each layer by around 50 %. According to HeyGears, with PAU10 this means 25 % fewer supports and up to 20 % more speed with some resins. It is not recommended for models with walls of 3 mm or less.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e already includes a tank like this one. The standalone tank works as a replacement or lets you keep one per resin.\u003c\/li\u003e\n\u003cli\u003eResins that require the module: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the module: PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e. For these, use the standard tank.\u003c\/li\u003e\n\u003cli\u003eIf you use the module, HeyGears specifies a dedicated screen tape: \u003cem\u003eReflex Pulsing LCD Screen Tape\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003eNot suitable for the Reflex RS, RS Turbo or the Reflex 2 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe film and the tank don't last the same amount of time. The Pulsing Release film can be replaced on its own: HeyGears sells it in packs of two and has a replacement video on its wiki. Replace the complete tank if the frame gets damaged, or buy a second one so you don't have to empty it every time you switch resins.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe official \u003cem\u003ePulsing Release Module Installation\u003c\/em\u003e and \u003cem\u003ePulsing Release Film Replacement\u003c\/em\u003e videos are on the HeyGears wiki, in the Reflex section.\u003c\/li\u003e\n\u003cli\u003eCheck the resin before and after every print. A piece of cured residue can tear the film when the platform lowers.\u003c\/li\u003e\n\u003cli\u003eTo remove residue, use the \u003cem\u003eResin Tank Cleaning\u003c\/em\u003e function and the residue tool. Don't pull cured resin off by hand.\u003c\/li\u003e\n\u003cli\u003eTo clean the tank, use isopropyl alcohol and a lint-free cloth. You'll find them in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you only print standard or water-washable resins, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex\"\u003estandard Reflex tank\u003c\/a\u003e is all you need. For castable, elastic, tooling or high-temperature resins, you need this tank and the module.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work on the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the Reflex and Reflex Turbo.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release Module 2?\u003c\/h4\u003e\n\u003cp\u003eNo. Module 2 is for the Reflex 2 series, which has its own tank.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAC10 without the module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears requires the Pulsing Release Module for PAC10, PAE10, PAU20 and PAH270.\u003c\/p\u003e\n\u003ch4\u003eWhat about water-washable resins?\u003c\/h4\u003e\n\u003cp\u003ePAWW10 and PAWW20 are not compatible with the module. Use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eDo I need a different screen tape?\u003c\/h4\u003e\n\u003cp\u003eIf you print with the module, HeyGears specifies the \u003cem\u003eReflex Pulsing LCD Screen Tape\u003c\/em\u003e version.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS has its own \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eheated Pulsing Release tank\u003c\/a\u003e.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203690321,"sku":"DIST-6971437942055","price":196.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-pulsing-release-reflex_5e603acd-b97b-461b-8a32-ecc226e5ef7d.jpg?v=1792509549"},{"product_id":"heygears-tanque-de-resina-reflex-2","title":"HeyGears Reflex 2 Series Regular Resin Tank - Standard resin tank for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears Standard Resin Tank for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the regular Reflex 2 series tank, without Pulsing Release. It's easy to swap and works with both the Reflex 2 and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. It does not work with the Pulsing Release Module 2. For that, you need the Pulsing Release tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not require\u003c\/strong\u003e the Pulsing Release Module and does not work with it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResins:\u003c\/strong\u003e all Reflex 2 series resins that don't require the module, including water-washable ones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e on the Reflex 2 series, the resin is heated by the heated scraper, not by the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy get a second tank\u003c\/h3\u003e\n\u003cp\u003eWith one tank per resin, you don't have to empty and clean the tank every time you switch materials. It also gives you a spare if yours gets damaged. HeyGears even suggests stacking tanks of different resins using the platform's side drip rack.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the resins HeyGears marks as \"optional\" or \"no\" for the module: PAS10, PAP10, PAWR10, PAF10, PAU11, PAH10, PAM10, PAT10 and water-washable resins (such as \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e).\u003c\/li\u003e\n\u003cli\u003ePAC10, PAE10, PAU20 and PAH270 require the Pulsing Release Module 2 and its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003ePulsing Release tank for Reflex 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex, Reflex Turbo, RS or RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTake the tank out of the bag. There's a protective film under the release film. Peel it off slowly without pulling off the support pads.\u003c\/li\u003e\n\u003cli\u003eIf the rubber plugs under the tank stick out after shipping, press them back in.\u003c\/li\u003e\n\u003cli\u003eMake sure the screen is clean, place the tank on top and lock it in.\u003c\/li\u003e\n\u003cli\u003eFit the build platform and insert the scraper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecover leftover resin through a 120 mesh filter and pour it back into its bottle.\u003c\/li\u003e\n\u003cli\u003eScrape out any remaining resin with a spatula or scraper card.\u003c\/li\u003e\n\u003cli\u003eSpray alcohol or IPA inside and wipe with a lint-free cloth. You'll find alcohol in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eBefore refitting it, make sure there's no resin or cleaner residue left.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe release film has its own lifespan. HeyGears sells the Reflex 2 series film in packs of two, so you don't need to replace the whole tank if only the film fails. Replace the complete tank only if the frame is damaged.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eFor standard, high-detail or water-washable resins, choose this tank. If you want to print castable, elastic, tooling or high-temperature resins, you need the Pulsing Release tank with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e. To heat the resin, you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eHow is it different from the Pulsing Release tank?\u003c\/h4\u003e\n\u003cp\u003eThe Pulsing Release tank works with Module 2 and is required for PAC10, PAE10, PAU20 and PAH270. This tank is for printing without the module.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the entire Reflex 2 series.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAH270 with this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. PAH270 requires the Pulsing Release Module 2 and its tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with water-washable resins?\u003c\/h4\u003e\n\u003cp\u003eYes. Water-washable resins aren't compatible with the module, so they go in this tank. PAWW20 works on the Reflex 2 and 2 Pro. According to HeyGears' chart, PAWW10 works only on the Reflex 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eNo. On the Reflex 2 series, heating is done by the heated scraper.\u003c\/p\u003e\n\u003ch4\u003eCan I remove the film under the release film?\u003c\/h4\u003e\n\u003cp\u003eYes. It's a protective film that must be removed before use. Peel it off slowly without removing the pads.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203854161,"sku":"DIST-6971437943441","price":117.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-de-resina-reflex-2.jpg?v=1792509551"},{"product_id":"heygears-plataforma-perforada-reflex-2","title":"HeyGears Reflex 2 \/ 2 Pro - Perforated Stainless Steel Build Plate","description":"\u003ch2\u003eHeyGears Perforated Build Platform for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the original build platform for the Reflex 2 series: a 304 stainless steel plate full of holes, the same one that comes as standard with the printer. The holes let the resin drain better as the platform rises out of the vat. Use it as a replacement if yours has been damaged, or as a second platform so you can keep one printing while you remove parts from the other.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated design:\u003c\/strong\u003e helps liquid resin drain away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt's the same one that comes with the printer\u003c\/strong\u003e in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling:\u003c\/strong\u003e adjusted with the T-handle wrench supplied with the printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it only for the Reflex 2 and Reflex 2 Pro. It does not fit the Reflex, the Reflex Turbo or the Reflex RS family: each has its own platform (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-de-impresion-reflex\"\u003eReflex platform\u003c\/a\u003e and Reflex RS platform). It works the same with the standard vat, the Pulsing Release vat and the Pulsing Release Module 2: the platform doesn't change when you use the module.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the surface is damaged, bent or dented and parts no longer adhere properly.\u003c\/li\u003e\n\u003cli\u003eIf you work in batches: with a second clean platform you can start the next job without waiting to remove parts from and clean the first one.\u003c\/li\u003e\n\u003cli\u003eBefore blaming the platform when a part doesn't stick, check the usual suspects: debris in the vat or in the holes, a damaged film, old resin or low temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and levelling\u003c\/h3\u003e\n\u003cp\u003eYou mount it on the printer's holder and level it from the menu. These are the steps HeyGears gives for the Reflex 2 series:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure the platform and vat are clean, free of debris, and that both are locked in place. The scraper must be at the far right.\u003c\/li\u003e\n\u003cli\u003eGo to settings and select platform levelling. Use tweezers to remove the two rubber plugs from the top of the holder.\u003c\/li\u003e\n\u003cli\u003eWith the T-handle wrench, turn the holder screw in the direction shown on the screen until the value turns green.\u003c\/li\u003e\n\u003cli\u003eConfirm. The printer runs a check and, if needed, will ask you for a fine adjustment.\u003c\/li\u003e\n\u003cli\u003ePut the rubber plugs back and press OK to return the platform to its position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning and using a perforated platform\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the platform in a tray with 95% alcohol or IPA and wipe it with a lint-free cloth. You can spray alcohol into the holes.\u003c\/li\u003e\n\u003cli\u003eDry it with compressed air, including the holes, and check that no resin remains before printing again.\u003c\/li\u003e\n\u003cli\u003eUse rafts of at least 10 x 10 mm, no smaller than the part's cross-section and more than 1 mm thick. This prevents Blueprint Studio from generating supports right over a hole.\u003c\/li\u003e\n\u003cli\u003eFor small parts, group them in Blueprint Studio so they share a single raft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor alcohol and other cleaning supplies, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e section.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex 2 Series Perforated Build Platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex 2, Reflex 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437943465\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex, Reflex Turbo, Reflex RS or RS Turbo, this platform won't fit. It's also not for resin printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with both the Reflex 2 and the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with both.\u003c\/p\u003e\n\u003ch4\u003eIs it the same one that comes with the printer?\u003c\/h4\u003e\n\u003cp\u003eYes, it's the Reflex 2's standard platform. You buy it as a replacement or as a second platform.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex RS or the original Reflex?\u003c\/h4\u003e\n\u003cp\u003eNo. Each family has its own platform.\u003c\/p\u003e\n\u003ch4\u003eDo I need to level it after swapping it?\u003c\/h4\u003e\n\u003cp\u003eYes, level it from the settings menu using the T-handle wrench.\u003c\/p\u003e\n\u003ch4\u003eWhat are the holes for?\u003c\/h4\u003e\n\u003cp\u003eTo help the resin drain better. That's why you should use rafts of at least 10 x 10 mm and avoid placing supports over a hole.\u003c\/p\u003e\n\u003ch4\u003eHow do I clean it?\u003c\/h4\u003e\n\u003cp\u003eWith 95% alcohol or IPA and a lint-free cloth, getting alcohol into the holes, then drying it with air.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to use it?\u003c\/h4\u003e\n\u003cp\u003eNo. It works the same with or without the module.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204083537,"sku":"DIST-6971437943465","price":177.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-plataforma-perforada-reflex-2-acero-inoxidable.jpg?v=1792509556"},{"product_id":"heygears-plataforma-de-impresion-reflex","title":"HeyGears Reflex \/ Reflex Turbo - Stainless Steel Build Plate","description":"\u003ch2\u003eHeyGears steel build platform for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eGenuine replacement build platform for the HeyGears Reflex. It's a perforated 304 stainless steel plate: the holes let liquid resin drain back into the vat instead of pooling on the platform and your parts. Get it to replace a damaged platform, or as a second one so your printer keeps running while you remove parts.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated design:\u003c\/strong\u003e helps resin drain away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex build volume:\u003c\/strong\u003e 192 x 121 x 220 mm (HeyGears figure).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e replacement or second platform for batch printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it for the Reflex. The Reflex Turbo is the evolution of the Reflex, with an upgraded Amber screen, and HeyGears groups documentation and spare parts for both as \"Reflex\/Reflex Turbo\" (vats, films, tape and screen protector). It does not fit the Reflex RS family or the Reflex 2 series: for those, choose the Reflex RS platform or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-perforada-reflex-2\"\u003eReflex 2 perforated platform\u003c\/a\u003e. The platform stays the same whether you use the standard vat, the Pulsing Release vat or the Pulsing Release Module.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the surface is damaged or warped and parts no longer stick.\u003c\/li\u003e\n\u003cli\u003eIf you print in batches and want a clean platform ready for the next job.\u003c\/li\u003e\n\u003cli\u003eIf parts are falling off, check these first: debris in the vat or in the platform holes, a cloudy or damaged film, poorly stored resin or low temperature. HeyGears recommends 20-25 °C and humidity below 50 %.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and leveling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the platform on its holder with the vat clean and locked in place.\u003c\/li\u003e\n\u003cli\u003eLevel it from the printer menu. HeyGears has an official video, \"Reflex Build Platform Leveling\", on its wiki.\u003c\/li\u003e\n\u003cli\u003eTo remove the platform with parts without touching the resin, HeyGears sells a Platform Transfer Tool that is only compatible with the Reflex.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRafts and holes\u003c\/h3\u003e\n\u003cp\u003eWith a perforated platform, you need to pay attention to the raft. HeyGears recommends:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDon't print without a raft, or with a solid or skate-style raft: parts come loose more easily.\u003c\/li\u003e\n\u003cli\u003eA raft no smaller than the part's cross-section and at least 10 x 10 mm, so supports aren't generated over a hole.\u003c\/li\u003e\n\u003cli\u003eRaft thickness above 1 mm, so it comes off in one piece without leaving residue.\u003c\/li\u003e\n\u003cli\u003eGroup small parts in Blueprint Studio on a single raft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning\u003c\/h3\u003e\n\u003cp\u003eAfter removing your parts, check there's no residue left on the surface or inside the holes. Clean with isopropyl alcohol and a lint-free cloth, and blow dry with air before mounting it. You'll find alcohol and supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex Steel Build Platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex, Reflex Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437942062\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt's not for the Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro, or for printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eDoes it fit the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears treats the Reflex and Reflex Turbo as the same family, and they share the print area spare parts.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex RS or Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eNo. Each family has its own platform.\u003c\/p\u003e\n\u003ch4\u003eWhat material is it made of?\u003c\/h4\u003e\n\u003cp\u003e304 stainless steel, with a perforated design.\u003c\/p\u003e\n\u003ch4\u003eWhat are the holes for?\u003c\/h4\u003e\n\u003cp\u003eThey let liquid resin drain back into the vat. That's why a raft of at least 10 x 10 mm is recommended.\u003c\/p\u003e\n\u003ch4\u003eDo I need to level it after replacing it?\u003c\/h4\u003e\n\u003cp\u003eYes, from the printer menu, following HeyGears' official leveling video.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The platform is the same with or without the module.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204345681,"sku":"DIST-6971437942062","price":161.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-plataforma-impresion-acero-reflex.jpg?v=1792509560"},{"product_id":"heygears-rascador-calefactado-reflex-2","title":"HeyGears Reflex 2 \/ 2 Pro - Heated Resin Scraper","description":"\u003ch2\u003eHeyGears Heated Scraper for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThe Reflex 2 series scraper is the part that moves across the vat, stirring the resin between layers. The heated version has a built-in heater and temperature sensor: it warms the resin while stirring it and keeps it at printing temperature throughout the entire job. The Reflex 2 Pro comes with it as standard; the Reflex 2 comes with the regular scraper, and this is its optional temperature-control upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster heating:\u003c\/strong\u003e from 10 °C to 22 °C in 6 minutes, 68 % faster according to HeyGears (tested with PAP10).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature control:\u003c\/strong\u003e ±1 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains the temperature\u003c\/strong\u003e throughout the entire print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrip time:\u003c\/strong\u003e 24 % less waiting with high-viscosity resins (HeyGears data with PAU20).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cp\u003eCold resin is thicker: it drains more poorly, struggles to flow under the build plate and causes more print failures. HeyGears recommends printing between 20 and 25 °C. If your workshop gets cold in winter, or you use thick engineering resins, the heated scraper brings the resin up to temperature without waiting for the room to warm up. Stirring also keeps the resin from settling and leaving residue in the vat.\u003c\/p\u003e\n\u003cp\u003eHeyGears data:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith PAP10, from 10 °C to 22 °C in 6 minutes.\u003c\/li\u003e\n\u003cli\u003eWith PAU20 at 50 µm layers, heating from 25 °C to 35 °C reduced drip waiting time by more than 24 % on models with a cross-section larger than 40 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2:\u003c\/strong\u003e optional upgrade. The printer comes with the regular scraper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 Pro:\u003c\/strong\u003e included as standard. This one serves as a replacement or spare part.\u003c\/li\u003e\n\u003cli\u003eFits the Reflex 2 series vat. The Reflex 2 Pro comes with it as standard and supports the Pulsing Release Module 2 kit, so it also works with the Pulsing Release vat.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex, Reflex Turbo or the Reflex RS family. On the RS, heating is handled by the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eheated vat\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt fits into the vat just like the regular scraper, after installing the vat and the build plate.\u003c\/li\u003e\n\u003cli\u003eBefore levelling the build plate, the scraper must be at the far right end of the vat. If it doesn't return on its own, move it there by hand.\u003c\/li\u003e\n\u003cli\u003eDo not disconnect it while it is moving or heating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning\u003c\/h3\u003e\n\u003cp\u003eHeyGears' procedure for the Reflex 2 series scraper:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a container of about 215 x 145 mm or slightly longer than the scraper.\u003c\/li\u003e\n\u003cli\u003eDip only the part that goes inside the vat into 95 % alcohol or IPA. The back of the scraper must not touch the liquid.\u003c\/li\u003e\n\u003cli\u003eHold it by the end and move it from side to side to clean it.\u003c\/li\u003e\n\u003cli\u003eDry the scraper's holes with compressed air and repeat if any resin remains.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlcohol and cleaning supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex 2 Series Heating Scraper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature accuracy\u003c\/td\u003e\n\u003ctd\u003e±1 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003e10 °C to 22 °C in 6 min (PAP10)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex 2, Reflex 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437944073\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex 2 and your workshop stays above 20 °C all year round, the regular scraper is all you need. If you work in a cold space or use thick resins such as PAU20, the heated one is the upgrade for you. With the Reflex 2 Pro, you only need it as a spare part.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt's not for the original Reflex, the Reflex Turbo, the RS or the RS Turbo, nor for printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Reflex 2 Pro already include it?\u003c\/h4\u003e\n\u003cp\u003eYes, the Reflex 2 Pro comes with a heated scraper. The Reflex 2 comes with the regular one.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take to heat the resin?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, from 10 °C to 22 °C in 6 minutes with PAP10.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is it?\u003c\/h4\u003e\n\u003cp\u003e±1 °C.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release vat?\u003c\/h4\u003e\n\u003cp\u003eIt fits the Reflex 2 series vat. HeyGears does not indicate any limitation with the Pulsing Release vat.\u003c\/p\u003e\n\u003ch4\u003eIs it compatible with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. On the RS, the resin is heated by the heated vat.\u003c\/p\u003e\n\u003ch4\u003eHow do I clean it?\u003c\/h4\u003e\n\u003cp\u003eOnly the part that goes in the vat, in 95 % alcohol or IPA, without wetting the back. Then blow compressed air through the holes.\u003c\/p\u003e\n\u003ch4\u003eCan I remove it with the printer switched on?\u003c\/h4\u003e\n\u003cp\u003eNot while it is moving or heating.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204542289,"sku":"DIST-6971437944073","price":93.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-rascador-calefactado-reflex-2.jpg?v=1792509564"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/collections\/heygears-tanque-pulsing-release-reflex-2.jpg?v=1792585502","url":"https:\/\/mrresin.es\/en\/collections\/heygears-spare-parts.oembed","provider":"Mr Resin","version":"1.0","type":"link"}