{"title":"HeyGears: resin 3D printers, resins and spare parts","description":"\u003cp\u003e\u003cstrong\u003eHeyGears\u003c\/strong\u003e makes LCD resin 3D printers, the \u003cstrong\u003eUltraCraft Reflex\u003c\/strong\u003e series, and everything that goes with them: \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/heygears-resins\"\u003eUltraPrint resins\u003c\/a\u003e with ready-tuned profiles, the \u003cstrong\u003eBlueprint\u003c\/strong\u003e software, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module\u003c\/a\u003e that peels each layer off with less force, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e for washing and curing, and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/heygears-spare-parts\"\u003egenuine spare parts\u003c\/a\u003e for every model.\u003c\/p\u003e\u003cp\u003eWe sell all three printers in the current range: the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e at 405 nm for miniatures and fine detail, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e at 385 nm for technical resins and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e at 385 nm for batch production. Below we explain how it all fits together, which resin goes in which machine and when you need the pulsing module.\u003c\/p\u003e","products":[{"product_id":"heygears-tanque-de-resina-reflex","title":"HeyGears Reflex Resin Tank - Standard resin tank for Reflex and Reflex Turbo","description":"\u003ch2\u003eHeyGears Standard Resin Tank for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eStandard tank, without Pulsing Release, for the first generation of the Reflex. It works with the Reflex and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e, and HeyGears describes it as easy to install and swap.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e compatible with the Reflex's automatic heating. On the Turbo, the heated tray raises the resin from 10 °C to 22 °C in about 20 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Pulsing Release Module:\u003c\/strong\u003e this is the tank for printing without the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting film:\u003c\/strong\u003e HeyGears rates the Reflex film for 45,000 layers or more, and the printer lets you know when it's time to replace it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy get a second tank\u003c\/h3\u003e\n\u003cp\u003eSo you can keep one tank per resin and avoid emptying and cleaning it every time you switch materials. And if you have the Pulsing Release Module, you can print resins that aren't compatible with it without removing the Pulsing tank.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the resins HeyGears approves for the Reflex and Reflex Turbo without the module: PAS10, PARP10, PAWR10, PAP10, PAF10, PAT10, PAU10, PAU11, PAM10, PAH10 and the water-washable PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePAC10, PAE10, PAU20 and PAH270 require the Pulsing Release Module and its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003ePulsing Release tank for Reflex\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe film and the tank don't have the same lifespan. The Reflex counts the printed layers and alerts you when the film is reaching the end of its life; HeyGears sells replacement film in packs of two and has a replacement video on its wiki. Replace the whole tank if the frame gets damaged or if you want one per resin.\u003c\/p\u003e\n\n\u003ch3\u003eFilm care\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists three common causes of film damage or leaks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning by hand:\u003c\/strong\u003e use the \u003cem\u003eResin Tank Cleaning\u003c\/em\u003e function and the debris removal tool. Don't pull cured resin off with your fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured debris:\u003c\/strong\u003e check the tank before and after every print. A piece of debris pressed by the build plate can tear the film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorn film:\u003c\/strong\u003e replace it promptly when the printer alerts you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo clean the tank, use isopropyl alcohol and a lint-free cloth. You'll find them in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eFor standard, high-detail or water-washable resins, this one. For castable, elastic, tooling or high-temperature resins, you need the Pulsing Release tank with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the Reflex and Reflex Turbo.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The module requires the Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eHeating is done by the printer's tray, and HeyGears lists this tank as compatible with it.\u003c\/p\u003e\n\u003ch4\u003eHow often should the film be replaced?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Reflex film for 45,000 layers or more. The printer keeps count and alerts you.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAU20 with this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. PAU20, PAC10, PAE10 and PAH270 require the Pulsing Release module and tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS has its own resin tank.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384121082193,"sku":"DIST-6971437942048","price":106.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-de-resina-reflex.jpg?v=1792509433"},{"product_id":"resina-heygears-ultraprint-pas10-estandar-1kg","title":"HeyGears UltraPrint PAS10 - Standard Modeling Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAS10: standard modelling resin for Reflex printers\u003c\/h2\u003e\n\u003cp\u003ePAS10 is the entry-level resin in HeyGears' UltraPrint range: its own technical data sheet presents it as the most affordable option in the family. It has medium viscosity, moderate strength and toughness, and a matte finish where layers aren't visible to the naked eye. It's designed for figures, miniatures and appearance prototypes printed on HeyGears Reflex printers, and you can get it in three colours: white, light purple and black, in a 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003eIf you have a Reflex and want an everyday resin that prints right first time, start here. If you need more impact resistance, heat resistance or transparency, we explain which one to choose further down.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PAS10 is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWorking on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar) and doesn't guarantee results on them. If you don't have a Reflex, this isn't the resin for you: take a look at our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins\"\u003e3D printer resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm tolerance on parts up to 20 mm (±0.08 mm up to 50 mm and ±0.18 mm up to 100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer supports:\u003c\/strong\u003e handles overhangs of up to 25° without supports, according to the technical data sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e matte, with no layer lines visible to the naked eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast curing:\u003c\/strong\u003e 5 minutes without heat in the UltraCraft Cure (light purple) and 10 minutes for black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNotched impact:\u003c\/strong\u003e 32 J\/m for light purple, 27 J\/m for black and 45 J\/m for white (ASTM D256)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat deflection temperature:\u003c\/strong\u003e between 51 and 55 °C at 0.455 MPa, depending on the colour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle in white, light purple or black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2 and 2 Pro) and 405 nm (Reflex RS and RS Turbo), HeyGears printers only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears recommends it for three things: parts where you don't want to see layers, miniatures and mecha parts with lots of curved and flat surfaces, and appearance prototypes that need to fit together precisely. Its ±0.05 mm tolerance also makes it suitable for short runs of identical parts.\u003c\/p\u003e\n\u003cp\u003eIt's a resin for people who print models and figures on their Reflex and want a reliable, affordable material to work with every day. It's not an engineering resin: for parts that will take impacts, heat or loads, there are better options within the same range.\u003c\/p\u003e\n\n\u003ch3\u003eWhich colour should you choose?\u003c\/h3\u003e\n\u003cp\u003eAll three colours share the same name, but HeyGears publishes different data for each one, so they aren't simply the same resin with different pigment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight purple:\u003c\/strong\u003e the reference colour for PAS10, used for the technical data sheet and the user guide. Viscosity of 531 mPa·s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e the stiffest (flexural modulus of 2490 MPa and 85 Shore D) and the one with the highest heat deflection temperature (55 °C), but the lowest work of fracture (2200 J\/m²). More fluid: 250 mPa·s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite:\u003c\/strong\u003e the toughest of the three: 7680 J\/m² work of fracture, 45 J\/m impact and 20 % elongation. Viscosity of 229 mPa·s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. It isn't required, but it reduces peel forces and lets you use thinner supports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic resin refill:\u003c\/strong\u003e not supported, according to HeyGears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that the compatibility table and process packages are being updated; if in doubt, go with what Blueprint Studio shows for your printer. If you're looking for a machine, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty (standard)\u003c\/th\u003e\n\u003cth\u003eLight purple\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003cth\u003eWhite\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ASTM D790)\u003c\/td\u003e\n\u003ctd\u003e79 MPa\u003c\/td\u003e\n\u003ctd\u003e88 MPa\u003c\/td\u003e\n\u003ctd\u003e91 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus (ASTM D790)\u003c\/td\u003e\n\u003ctd\u003e1630 MPa\u003c\/td\u003e\n\u003ctd\u003e2490 MPa\u003c\/td\u003e\n\u003ctd\u003e2460 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture (ISO 20795-1)\u003c\/td\u003e\n\u003ctd\u003e3200 J\/m²\u003c\/td\u003e\n\u003ctd\u003e2200 J\/m²\u003c\/td\u003e\n\u003ctd\u003e7680 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break (ASTM D638)\u003c\/td\u003e\n\u003ctd\u003e16 %\u003c\/td\u003e\n\u003ctd\u003e15 %\u003c\/td\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact (ASTM D256)\u003c\/td\u003e\n\u003ctd\u003e32 J\/m\u003c\/td\u003e\n\u003ctd\u003e27 J\/m\u003c\/td\u003e\n\u003ctd\u003e45 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa (ASTM D648)\u003c\/td\u003e\n\u003ctd\u003e51 °C\u003c\/td\u003e\n\u003ctd\u003e55 °C\u003c\/td\u003e\n\u003ctd\u003e51 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness (Shore D)\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (ASTM D4212)\u003c\/td\u003e\n\u003ctd\u003e531 mPa·s\u003c\/td\u003e\n\u003ctd\u003e250 mPa·s\u003c\/td\u003e\n\u003ctd\u003e229 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eAdditional data for light purple from its technical data sheet: tensile modulus of 1400 MPa, tensile strength of 45 MPa, water absorption of 1.2 %, 200 h UV ageing test passed (equivalent to around 3 years indoors) and damp heat test passed. All data come from the HeyGears laboratory, averaged across tests with a deviation of ±10 %.\u003c\/p\u003e\n\u003ch4\u003eDesign minimums (light purple, standard tank)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall: 0.2 mm (0.18 mm with Pulsing Release tank)\u003c\/li\u003e\n\u003cli\u003eMinimum hole and pillar: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eMinimum gap between parts: 0.25 mm\u003c\/li\u003e\n\u003cli\u003eRelief details: 0.12 mm embossed and 0.24 mm engraved, at 0.4 mm depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the tank so no pigment is left settled at the bottom. Slice in Blueprint Studio, selecting PAS10 and the correct colour, with automatic supports. If you won't be printing within 3 days, filter the resin and pour it back into the bottle; don't leave it in the tank for more than 7 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e HeyGears gives these times using 95 % alcohol:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltraCraft Wash at 180 rpm: 2 minutes pre-wash + 2 minutes fine wash\u003c\/li\u003e\n\u003cli\u003eUltrasonic: 1 + 2 minutes for light purple, 2 + 2 minutes for black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe first wash is done with used alcohol and the second with clean alcohol. Don't leave the part in alcohol for more than 10 minutes in total, as it affects its properties and dimensions. Afterwards, dry it with compressed air or in an oven for 10 minutes (50 °C for light purple, 45 °C for black). You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, fast mode, without heat and in air: 5 minutes for light purple and 10 minutes for black. For white, use the profile Blueprint assigns. HeyGears recommends sending the curing job from Blueprint, which applies a more refined process than manual curing. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and other options are in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSanding and painting:\u003c\/strong\u003e most parts sand well starting with 300-400 grit, moving to 600 and finishing at 1000 if you're going to paint with an airbrush or spray. Dry the part thoroughly before painting. Be careful with some UV paints: they can make the part more brittle, so test first.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAS10 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear chemical-resistant gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eAvoid contact with liquid resin and uncured parts. If it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and see a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: 106 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore tightly closed between 15 and 28 °C, away from sunlight and moisture. Shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one should you choose in the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePAB10: the other standard modelling resin, matte grey, designed for sanding and painting with good adhesion. Higher impact than purple PAS10 (45 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-parp10-prototipado-rapido-1kg\"\u003ePARP10 Orange Clay\u003c\/a\u003e: very fine detail and high-quality surface for figures, jewellery prototypes and moulds.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, tougher and with higher heat resistance (63 °C), for housings, parts and fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e: if you'd rather not work with alcohol, it washes with water in 2 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: transparent, for parts that need to let light through.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf the part will operate above around 50 °C: its heat deflection temperature is 51-55 °C.\u003c\/li\u003e\n\u003cli\u003eIf you need functional parts that withstand impacts and repeated stress: PAU11 is a better choice.\u003c\/li\u003e\n\u003cli\u003eIf you use your Reflex's automatic resin refill: PAS10 doesn't support it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAS10 on an Elegoo, Anycubic or other 405 nm LCD printer?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. Although it works on the Reflex RS, which is 405 nm, it does so with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eIs it 385 or 405 nm?\u003c\/h4\u003e\n\u003cp\u003eBoth, within the Reflex series: HeyGears validates it on the Reflex, Reflex Turbo, Reflex 2 and 2 Pro (385 nm) and on the Reflex RS and RS Turbo (405 nm).\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between white, light purple and black?\u003c\/h4\u003e\n\u003cp\u003eHeyGears publishes different data for each colour. White is the toughest (7680 J\/m² work of fracture), black is the stiffest and hardest (2490 MPa flexural and 85 Shore D) and light purple is the reference colour for the technical data sheet.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to print it?\u003c\/h4\u003e\n\u003cp\u003eNo. With PAS10 it's optional. If you have it, it reduces peel forces and allows thinner supports, but it also prints with the standard tank.\u003c\/p\u003e\n\u003ch4\u003eHow long does it need for post-curing?\u003c\/h4\u003e\n\u003cp\u003eIn the UltraCraft Cure, fast mode and without heat: 5 minutes for light purple and 10 minutes for black. For white, use the profile Blueprint assigns.\u003c\/p\u003e\n\u003ch4\u003eWhat do you wash it with?\u003c\/h4\u003e\n\u003cp\u003eWith 95 % alcohol: 2 minutes pre-wash and 2 minutes fine wash in the UltraCraft Wash. Don't leave it in alcohol for more than 10 minutes in total.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with automatic resin refill?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that PAS10 doesn't support automatic refill.\u003c\/p\u003e\n\u003ch4\u003eCan it be sanded and painted?\u003c\/h4\u003e\n\u003cp\u003eYes. Sand from 300-400 grit up to 1000 if you're going to paint, dry the part thoroughly and test UV paints first, as some can make it more brittle.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"White","offer_id":55384127832401,"sku":"DIST-6971437944103","price":45.99,"currency_code":"EUR","in_stock":true},{"title":"Light purple","offer_id":55384127865169,"sku":"DIST-6971437941669","price":45.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":55384127897937,"sku":"DIST-6971437942468","price":45.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pas10-morado-claro-1kg.jpg?v=1792509441"},{"product_id":"impresora-3d-heygears-ultracraft-reflex-2-pro","title":"HeyGears UltraCraft Reflex 2 Pro - 385 nm Resin 3D Printer 230×144×350 mm","description":"\u003ch2\u003eHeyGears UltraCraft Reflex 2 Pro: 385 nm resin printer for batch production\u003c\/h2\u003e\n\u003cp\u003eThe Reflex 2 Pro is the largest and most professional machine in the HeyGears Reflex range. It's an LCD (MSLA) printer with 385 nm light, a build volume of 230 × 144 × 350 mm and its own lighting system, OptiZone, which splits the light into 1,032 individually controlled zones. HeyGears designed it to take you from prototype to production: batches of identical parts, solid parts, technical resins and plenty of usable height.\u003c\/p\u003e\n\u003cp\u003eThis isn't a beginner's printer. It's built for workshops, orthotics, footwear, tooling and anyone who already prints in resin every day and needs volume, repeatability and engineering resins.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 230 × 144 × 350 mm, 2.3 times that of the original Reflex according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 cm Z height:\u003c\/strong\u003e the manufacturer says you can print full-size orthoses and footwear in one go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e385 nm light (385+ nm)\u003c\/strong\u003e with the OptiZone light engine: 1,032 Mini-LED zones with collimating lenses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.7\" Amber Screen Pro\u003c\/strong\u003e: 10% energy transmission (twice that of a conventional 5% LCD), up to 35 W\/m² and a lifespan of over 6,000 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 μm native XY pixel\u003c\/strong\u003e, ±20 μm accuracy and layers from 20 to 250 μm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC5 Z axis with closed-loop FOC motor\u003c\/strong\u003e: ±2 μm repeatability under an 80 kg load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated scraper\u003c\/strong\u003e: brings the resin from 10 to 22 °C in 6 minutes and holds it at ±1 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation:\u003c\/strong\u003e resin auto-refill with ultrasonic sensor, 0.15 mm debris detection and self-levelling floating platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e USB, Wi-Fi and Ethernet (RJ-45). Prepare and control jobs with HeyGears Blueprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eThe Reflex 2 Pro makes sense when the printer runs for long hours and volume matters. HeyGears focuses it on batch production: fill the platform with parts, repeat the batch and get identical results. The OptiZone engine matches the illuminated area to the outline of the nested parts, so no resin is exposed in the gaps between models. According to the manufacturer, this improves surface finish and dimensional accuracy and leaves less debris in the vat, so you filter less often.\u003c\/p\u003e\n\u003cp\u003eThe 35 cm of height opens the door to parts you'd have to split on a regular desktop printer: insoles and orthoses, shoe lasts and soles, housings, tooling and moulds. HeyGears says you can also arrange solid parts in an array for batch production, something that causes problems on many LCD printers.\u003c\/p\u003e\n\n\u003ch3\u003eTechnology: screen, light and mechanics\u003c\/h3\u003e\n\u003ch4\u003eOptiZone light engine with 1,032 zones\u003c\/h4\u003e\n\u003cp\u003eThe Reflex 2 Pro uses 1,032 individually controlled LEDs, each with its own collimating lens, plus a double-sided microlens array. According to HeyGears, the light comes out highly collimated and uniform and only switches on where there's a part.\u003c\/p\u003e\n\u003ch4\u003eAmber Screen Pro\u003c\/h4\u003e\n\u003cp\u003eThe screen transmits 10% of the energy, twice as much as a conventional LCD, and supports curing intensities of up to 35 W\/m². This shortens exposure per layer and lets you work with high-performance resins. HeyGears rates it for over 6,000 printing hours (contrast and transmission within 10% deviation after 6,000 h), equivalent to one year of use at 16 hours a day, with a 1-year warranty. It's reinforced to withstand the pressure of highly viscous resins: 10,000 cycles at 40 kg with no damage.\u003c\/p\u003e\n\u003ch4\u003eMASK light calibration\u003c\/h4\u003e\n\u003cp\u003eThe MASK visual calibration algorithm uses 86,020 zones to compensate for intensity differences across the screen. HeyGears states light uniformity of 94% or higher and print accuracy of 0.05 mm or better (measured on parts up to 20 mm in XY).\u003c\/p\u003e\n\u003ch4\u003eC5 Z axis and FOC motor\u003c\/h4\u003e\n\u003cp\u003eThe FOC motor module works in closed loop with 25,600 microsteps per revolution. Together with the C5 lead screw, it positions with ±2 μm repeatability even under an 80 kg load, and keeps 99.6% of layer thickness errors within ±2 μm at high speed. The base is a single cast piece, more rigid than a multi-part chassis.\u003c\/p\u003e\n\n\u003ch3\u003eAutomation that saves you work\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated scraper:\u003c\/strong\u003e heats and stirs the resin from 10 to 22 °C in 6 minutes and holds it at ±1 °C throughout the print. With viscous resins such as PAU20 at 35 °C, drip time drops by more than 24%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-refill:\u003c\/strong\u003e an ultrasonic sensor measures the level to ±0.5 mm and tops up the vat from the bottle when needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebris detection:\u003c\/strong\u003e 0.01 N force sensors detect 0.15 mm debris in the vat and stop the print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-levelling:\u003c\/strong\u003e the floating platform absorbs unevenness of up to 240 μm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHeyGears Blueprint software\u003c\/h3\u003e\n\u003cp\u003eThe Reflex 2 Pro pairs with \u003cstrong\u003eBlueprint Studio\u003c\/strong\u003e (Windows and macOS) and the Blueprint Go app (Android and iOS). Blueprint handles orientation, layout, support generation, mesh repair and slicing with profiles by material, layer thickness and part type. It updates via OTA and lets you send jobs and monitor the printer from your phone.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: resins and Pulsing Release Module 2\u003c\/h3\u003e\n\u003cp\u003eThis printer works at \u003cstrong\u003e385 nm\u003c\/strong\u003e and is designed for HeyGears \u003cstrong\u003eUltraPrint\u003c\/strong\u003e resins, with profiles already tuned in Blueprint. According to the official compatibility chart, with the Reflex 2 Pro you can use, among others, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pam10-color-1kg\"\u003ePAM10\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe most demanding engineering resins require the \u003cstrong\u003ePulsing Release Module 2\u003c\/strong\u003e: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10 castable\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10 elastic\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20 tooling\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270 high-temperature\u003c\/a\u003e. The module is not included with the printer. You can get it in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit for Reflex 2 and 2 Pro\u003c\/a\u003e (module and vat) or as a \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003estandalone module\u003c\/a\u003e, which always works with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 series Pulsing Release vat\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhat does Pulsing Release do? It inflates and deflates the vat film on every layer to peel the part off with less force. With version 2, HeyGears claims up to 60% fewer supports and up to 54% less contact area. The water-washable PAWW10 and PAWW20 resins are not compatible with the module.\u003c\/p\u003e\n\u003cp\u003eAbout third-party resins: HeyGears offers Open Material mode in Blueprint for the Reflex\/Reflex Turbo and RS\/RS Turbo series, but as of today it hasn't announced it for the Reflex 2 Pro. If you plan to use it with third-party resins, ask us first.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e10.7\" Amber Screen Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eOptiZone, 1,032 Mini-LED zones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative XY pixel\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±20 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e20-250 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ axis\u003c\/td\u003e\n\u003ctd\u003eC5-grade lead screw with closed-loop FOC motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin heating\u003c\/td\u003e\n\u003ctd\u003eHeated scraper, ±1 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLevelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic, absorbs up to 240 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDebris detection\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal interfaces\u003c\/td\u003e\n\u003ctd\u003eGreenPrint purification module, Pulsing Release Module 2, Ethernet RJ-45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e430 × 445 × 715 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e29.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface languages\u003c\/td\u003e\n\u003ctd\u003eEnglish and Simplified Chinese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's in the box\u003c\/h4\u003e\n\u003cp\u003ePrinter, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e, resin refill cap, power cable, part removal tool, resin vat, build platform, T-wrench, quick start guide and after-sales service guide.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation, use and post-processing\u003c\/h3\u003e\n\u003cp\u003eIt weighs almost 30 kg: HeyGears recommends two people place it on a flat table. On first start-up, the printer guides you through language, network and pairing with Blueprint Studio using a code. For auto-refill, HeyGears recommends fitting the bottle with the pump included with the printer.\u003c\/p\u003e\n\u003cp\u003eThen comes washing and curing. HeyGears offers the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, and the printer has a connection for the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-sistema-de-purificacion\"\u003eUltraCraft purification system\u003c\/a\u003e. You'll find more options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eReflex 2 series spare parts: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex-2\"\u003estandard vat\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-perforada-reflex-2\"\u003eperforated platform\u003c\/a\u003e, heated scraper and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-reflex-2\"\u003eLCD screen\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one to choose? Reflex 2 Pro, Reflex Turbo or RS Turbo\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex 2 Pro\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex RS Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY pixel\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering resins (PAU20, PAH270, PAE10, PAC10)\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module 2\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin heating\u003c\/td\u003e\n\u003ctd\u003eHeated scraper included\u003c\/td\u003e\n\u003ctd\u003eHeated tray included\u003c\/td\u003e\n\u003ctd\u003eOnly with optional heated vat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e29.7 kg\u003c\/td\u003e\n\u003ctd\u003e25 kg\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you need height, batch production or large solid parts, go for the Reflex 2 Pro. If you want 385 nm technical resins in a more compact format, choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. If you're into miniatures, figures and detailed prototypes, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e is for you. You'll find more models in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eResin beginners or occasional users: it's a lot of machine, and it's big and heavy.\u003c\/li\u003e\n\u003cli\u003eUsing third-party resins: HeyGears hasn't announced Open Material mode for this model.\u003c\/li\u003e\n\u003cli\u003eMiniatures: the 29.7 μm pixel of the RS Turbo gives more detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWhat wavelength does the Reflex 2 Pro use?\u003c\/h4\u003e\n\u003cp\u003e385 nm (385+ nm according to HeyGears). It's designed for HeyGears UltraPrint resins, with profiles already tuned in Blueprint.\u003c\/p\u003e\n\u003ch4\u003eWhat is its build volume?\u003c\/h4\u003e\n\u003cp\u003e230 × 144 × 350 mm. According to HeyGears, 2.3 times the volume of the original Reflex, with 35 cm of usable height.\u003c\/p\u003e\n\u003ch4\u003eIs the Pulsing Release Module included?\u003c\/h4\u003e\n\u003cp\u003eNo. The box includes the printer, heated scraper, standard vat and platform. The Pulsing Release Module 2 is sold separately and is required for PAC10, PAE10, PAU20 and PAH270.\u003c\/p\u003e\n\u003ch4\u003eCan I use resins from other brands?\u003c\/h4\u003e\n\u003cp\u003eHeyGears markets it as compatible with all Reflex series resins. Open Material mode for third-party resins is currently only announced for Reflex\/Reflex Turbo and RS\/RS Turbo. If that's your case, contact us before buying.\u003c\/p\u003e\n\u003ch4\u003eWhat software do I need?\u003c\/h4\u003e\n\u003cp\u003eHeyGears Blueprint Studio for Windows or macOS and, if you like, the Blueprint Go app to monitor your prints from your phone.\u003c\/p\u003e\n\u003ch4\u003eHow long does the screen last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Amber Screen Pro for over 6,000 printing hours, with a 1-year warranty. The screen is modular and can be replaced as a spare part.\u003c\/p\u003e\n\u003ch4\u003eHow is it shipped?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384195826001,"sku":"DIST-6971437942987","price":3522.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-reflex-2-pro-impresora-3d-resina-385nm.jpg?v=1792509483"},{"product_id":"impresora-3d-heygears-ultracraft-reflex-turbo","title":"HeyGears UltraCraft Reflex Turbo - 385 nm Resin 3D Printer 192×121×220 mm","description":"\u003ch2\u003eHeyGears UltraCraft Reflex Turbo: 385 nm resin printer for functional parts\u003c\/h2\u003e\n\u003cp\u003eThe Reflex Turbo is the upgraded version of the HeyGears Reflex. It's an LCD (MSLA) printer with a 385 nm UV light source, a 9.25\" Amber Screen and a build volume of 192 × 121 × 220 mm. Its strength is engineering resins: ABS-like, polycarbonate-like, elastic, clear and castable, with profiles already tuned in the Blueprint software and plenty of automation so your print comes out right the first time.\u003c\/p\u003e\n\u003cp\u003eIt's a great fit for workshops, product design studios, engineering, jewellery and advanced makers who want functional, repeatable parts without spending all day tweaking settings.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e385 nm UV light (385+ nm):\u003c\/strong\u003e HeyGears claims curing that is 1.5 times more powerful than 405 nm printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 192 × 121 × 220 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.25\" Amber Screen:\u003c\/strong\u003e 2.5 times longer lifespan and 22 % more contrast than the previous generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e33 μm native XY pixel\u003c\/strong\u003e and ±16 μm accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC5 ball screw Z axis:\u003c\/strong\u003e positioning errors of 2 μm at most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated vat included:\u003c\/strong\u003e warms the resin from 10 to 22 °C in 20 minutes and keeps it there.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation:\u003c\/strong\u003e resin refilling, residue detection, floating-screen auto-levelling and light-ageing compensation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with the Pulsing Release Module\u003c\/strong\u003e (optional) and with Blueprint's Open Material mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eThe Reflex Turbo is designed for parts that get used, not just looked at: functional prototypes, assembly parts, tooling, gaskets and elastic parts, clear parts and casting models. HeyGears states that 90.6 % of parts show a surface deviation of 0.05 mm or less from the design, with 0.136 mm pillars as the finest detail. The screen is factory-calibrated with light variation within 3 % across the entire platform.\u003c\/p\u003e\n\u003cp\u003eWhat sets it apart from a consumer 405 nm LCD is the combination of 385 nm light and locked, material-specific profiles. This allows HeyGears to offer high-performance resins that either don't cure well on a 405 nm printer or need a lot of tuning.\u003c\/p\u003e\n\n\u003ch3\u003eTechnology: light, screen and mechanics\u003c\/h3\u003e\n\u003ch4\u003e385 nm light source\u003c\/h4\u003e\n\u003cp\u003ePhotopolymer resins react more strongly to shorter wavelengths. The Reflex Turbo works at 385 nm and, according to HeyGears' tests, cures 1.5 times more than most 405 nm resin printers. The manufacturer links this to being able to use ABS-like, polycarbonate-like and rubber-like resins with better final properties.\u003c\/p\u003e\n\u003ch4\u003eAmber Screen\u003c\/h4\u003e\n\u003cp\u003eThe screen uses a polariser dyed with UV-resistant dye molecules. This reduces contrast loss over time and extends screen life 2.5 times compared with the previous generation, with 22 % more contrast. On top of that, the printer tracks light ageing and compensates for it automatically throughout the machine's life.\u003c\/p\u003e\n\u003ch4\u003eC5 Z axis\u003c\/h4\u003e\n\u003cp\u003eThe C5-grade ball screw delivers ±2 μm repeatability. In HeyGears' tests, with a 30 kg load and ten thousand cycles, 96 % of errors stayed below 1 μm and 99.9 % below 2 μm. Less variation between layers means fewer layer lines.\u003c\/p\u003e\n\u003ch4\u003ePrinting algorithms\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Motion Algorithm 3.0:\u003c\/strong\u003e analyses each layer (cross-section, spacing and number of parts) and chooses from 18 sets of motion parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegional exposure:\u003c\/strong\u003e distinguishes supports, outer walls and inner walls and cures them separately. It improves surface hardness and support strength, especially with ABS-like, PVC-like, nylon-like and elastic resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdaptive Z compensation:\u003c\/strong\u003e each material package adjusts Z compensation for up to 180 combinations of angles, holes and edges. Less warping and less resin build-up in supported areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAutomation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidue detection:\u003c\/strong\u003e 0.1 N force sensors detect 0.2 mm residues and stop the print if something fails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-levelling:\u003c\/strong\u003e the floating screen absorbs unevenness of up to 240 μm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin refilling:\u003c\/strong\u003e measures the amount of resin with 5 g accuracy and tops it up before and during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated vat:\u003c\/strong\u003e brings the resin from 10 to 22 °C in 20 minutes and keeps it there for the whole print.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears says it's ready to print in about 10 minutes and that you can learn to use it in under an hour.\u003c\/p\u003e\n\n\u003ch3\u003eHeyGears Blueprint software\u003c\/h3\u003e\n\u003cp\u003eEverything runs through \u003cstrong\u003eBlueprint Studio\u003c\/strong\u003e (Windows and macOS). Blueprint orients, arranges, adds supports and slices, detects and repairs mesh errors (flipped normals, intersecting or missing faces) and warns you about problem areas such as thin walls or enclosed volumes. It applies print strategies based on material, printer, layer height, part requirements and geometry. It also lets you send jobs and check the printer's status from your computer or phone.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: resins, open materials and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eThe Reflex Turbo works at \u003cstrong\u003e385 nm\u003c\/strong\u003e with HeyGears \u003cstrong\u003eUltraPrint\u003c\/strong\u003e resins. According to the official compatibility chart, it can use the full Reflex series range: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-parp10-prototipado-rapido-1kg\"\u003ePARP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pam10-color-1kg\"\u003ePAM10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e and the water-washable \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor engineering resins you need the \u003cstrong\u003ePulsing Release Module\u003c\/strong\u003e: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10 castable\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10 elastic\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20 tooling\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e. The module isn't included with the printer: you'll find it in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex and Reflex Turbo\u003c\/a\u003e, which includes the module and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003ePulsing Release vat\u003c\/a\u003e. The module inflates and deflates the vat film on every layer and reduces peel force by around 50 %. HeyGears cites 25 % fewer supports and up to 20 % more speed with some resins. It isn't recommended for walls of 3 mm or less and isn't compatible with PAWW10 or PAWW20.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThird-party resins:\u003c\/strong\u003e the Reflex Turbo supports Blueprint Studio's \u003cstrong\u003eOpen Material mode\u003c\/strong\u003e. You select \"Open Material\" as the material and adjust exposure, light intensity and dimensional compensation in the process editor. HeyGears intends it for experienced users and for 405 nm photopolymer resins. The hardware warranty remains valid in both modes, according to HeyGears' terms. Results with third-party resins depend on you and on the resin.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e9.25\" Amber Screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative XY pixel\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±16 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e25-150 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ axis\u003c\/td\u003e\n\u003ctd\u003eC5-grade ball screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e400 × 420 × 572 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface languages\u003c\/td\u003e\n\u003ctd\u003eEnglish, Simplified Chinese and Japanese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's in the box\u003c\/h4\u003e\n\u003cp\u003ePrinter, power cable, resin vat, build platform, LCD screen tape, spare film with 2 spare screws, 2 pairs of gloves, 3 Allen keys, part removal tool, 10 scrapers, pliers, simple cleaning box, 5 filter papers, residue remover and multifunction handle.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eThe workflow is simple: you prepare the part in Blueprint, choose the resin and the printer takes care of heating, refilling and levelling. When it's done, wash and cure your parts. HeyGears' stations are the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e; you can also use any of our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing supplies\u003c\/a\u003e. Always follow each resin's guidelines.\u003c\/p\u003e\n\u003cp\u003eCompatible spare parts: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex\"\u003eReflex resin vat\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-de-impresion-reflex\"\u003eReflex build platform\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex\"\u003eReflex Amber LCD screen\u003c\/a\u003e and tempered glass screen protector.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose? Reflex Turbo, Reflex 2 Pro or RS Turbo\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex 2 Pro\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex RS Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY pixel\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering resins (PAU20, PAH270, PAE10, PAC10)\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module 2\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen Material mode\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNot announced\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin heating\u003c\/td\u003e\n\u003ctd\u003eHeated vat included\u003c\/td\u003e\n\u003ctd\u003eHeated scraper included\u003c\/td\u003e\n\u003ctd\u003eOnly with optional heated vat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe Reflex Turbo is the middle ground: 385 nm engineering resins in a desktop format. If you need more height or batch production, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. If you'll mainly print miniatures and figures, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e offers higher resolution and is lighter. More options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you only print miniatures: the RS Turbo has higher resolution and is lighter.\u003c\/li\u003e\n\u003cli\u003eFor very tall parts or large batches of solid parts: the Reflex 2 Pro is the better choice there.\u003c\/li\u003e\n\u003cli\u003eIf you want to tinker with any cheap resin without profiles: Open Material makes it possible, but the machine shines with UltraPrint resins and their profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat wavelength does the Reflex Turbo use?\u003c\/h4\u003e\n\u003cp\u003e385 nm (385+ nm according to HeyGears). According to the manufacturer, it cures 1.5 times more than 405 nm printers, which allows it to use engineering resins.\u003c\/p\u003e\n\u003ch4\u003eHow is it different from the original Reflex?\u003c\/h4\u003e\n\u003cp\u003eThe Turbo features an improved Amber Screen, with 2.5 times longer lifespan and 22 % more contrast, and adds algorithms such as Dynamic Motion Algorithm 3.0, regional exposure and adaptive Z compensation.\u003c\/p\u003e\n\u003ch4\u003eCan I use resins from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes, with Blueprint Studio's Open Material mode, designed for experienced users. You set the exposure and intensity yourself. The hardware warranty remains valid according to HeyGears' terms.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eOnly for PAC10, PAE10, PAU20 and PAH270. With other resins it's optional and helps you use fewer supports. It isn't compatible with the water-washable PAWW10 and PAWW20.\u003c\/p\u003e\n\u003ch4\u003eDoes it have resin heating?\u003c\/h4\u003e\n\u003cp\u003eYes, the heated vat comes as standard. It warms the resin from 10 to 22 °C in 20 minutes and keeps it there.\u003c\/p\u003e\n\u003ch4\u003eWhat software does it use?\u003c\/h4\u003e\n\u003cp\u003eHeyGears Blueprint Studio for Windows and macOS. It prepares your parts, applies resin-specific profiles and lets you monitor prints remotely.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384199758161,"sku":"DIST-6971437942925","price":1704.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-reflex-turbo-impresora-3d-resina-385nm.jpg?v=1792509492"},{"product_id":"impresora-3d-heygears-ultracraft-reflex-rs-turbo","title":"HeyGears UltraCraft Reflex RS Turbo - 8K 405 nm Resin 3D Printer 222×122×228 mm","description":"\u003ch2\u003eHeyGears UltraCraft Reflex RS Turbo: 8K resin printer for miniatures and fine detail\u003c\/h2\u003e\n\u003cp\u003eThe Reflex RS Turbo is HeyGears' printer for anyone after fine detail: miniatures, figures, collectibles, jewellery and small prototypes. It is an LCD (MSLA) printer with a 10.3\" 8K Amber Screen, a 29.7 μm pixel size and a build volume of 222 × 122 × 228 mm. Note one important detail: \u003cstrong\u003eit works at 405 nm\u003c\/strong\u003e, not 385 nm like the Reflex Turbo or the Reflex 2 Pro.\u003c\/p\u003e\n\u003cp\u003eOf the three Reflex models we sell, it is the lightest and the one best suited to users moving up from an entry-level resin printer who want more detail and fewer failed prints, without wasting time tweaking settings.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.3\" 8K Amber Screen\u003c\/strong\u003e with a 566:1 contrast ratio, almost 60% higher than the previous generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver 1 million layers\u003c\/strong\u003e of screen lifespan, according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29.7 μm native XY pixel\u003c\/strong\u003e, ±15 μm accuracy and 30 to 100 μm layers.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e405 nm wavelength.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 222 × 122 × 228 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC5-grade Z axis:\u003c\/strong\u003e positioning errors of 2 μm at most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Motion Algorithm 3.0:\u003c\/strong\u003e up to 33% faster than conventional motion control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Material mode\u003c\/strong\u003e in Blueprint Studio for using resins from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation:\u003c\/strong\u003e floating-screen auto-levelling, automatic resin refilling and residue detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears designs it for tabletop miniatures, figures, busts, collectibles, jewellery prototypes, moulds and detailed parts. With a 29.7 μm pixel and a high-contrast screen, faces, clothing textures and edges come out crisp. In its official store, HeyGears presents it as a professional-grade machine that is easy to use, especially suited to anyone upgrading from an entry-level printer.\u003c\/p\u003e\n\u003cp\u003eIt also works for functional parts with resins such as the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003eABS-like PAU11\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ewear-resistant PAWR10\u003c\/a\u003e. What it can't do is handle HeyGears' most demanding engineering resins; for those, there are the Reflex Turbo and the Reflex 2 Pro.\u003c\/p\u003e\n\n\u003ch3\u003eTechnology: screen, mechanics and speed\u003c\/h3\u003e\n\u003ch4\u003eHigh-contrast Amber Screen\u003c\/h4\u003e\n\u003cp\u003eThe screen combines a polariser dyed with dye molecules and an optical layer that lets light through at 90°. This means less stray light reaches the layer being cured: less overexposure, cleaner edges and residue-free surfaces. The contrast ratio is 566:1, almost 60% higher than the previous generation. The dye molecules withstand UV and heat well, so contrast degrades less over time. HeyGears quotes over 1 million layers and up to twice the lifespan of a conventional LCD.\u003c\/p\u003e\n\u003ch4\u003eScreen calibration\u003c\/h4\u003e\n\u003cp\u003eThe screen is divided into 60 zones and calibrated with a full-screen tool to keep light variation within ±3% and a print tolerance of 0.05 mm or less. If you replace the screen, the printer recalibrates itself using the NFC data from the new screen, with light differences below 5%.\u003c\/p\u003e\n\u003ch4\u003eC5 Z axis and rigid frame\u003c\/h4\u003e\n\u003cp\u003eThe C5-grade Z module ensures positioning errors of 2 μm at most, tested by HeyGears with a 50 kg load over ten thousand cycles. The frame is highly rigid and the screen has its own cooling.\u003c\/p\u003e\n\u003ch4\u003eSpeed\u003c\/h4\u003e\n\u003cp\u003eThe Dynamic Motion Algorithm 3.0 analyses each layer (cross-section, separation and number of parts) and chooses from 18 sets of motion parameters. It splits each layer's movement into seven stages and reads the force sensor 80 times per second to avoid wasting time and prevent failures. HeyGears quotes up to 33% more speed (measured with PAWW10 versus conventional motion control) and an average of 4.5 seconds per layer. Actual speed depends on the model.\u003c\/p\u003e\n\u003ch4\u003eAdaptive Z compensation\u003c\/h4\u003e\n\u003cp\u003eEach material profile adjusts Z compensation for up to 180 combinations of angles, hole sizes and edge types. The result: less warping, less resin build-up in supported areas and less post-processing.\u003c\/p\u003e\n\n\u003ch3\u003eAutomation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidue detection:\u003c\/strong\u003e 0.1 N force sensors detect 0.2 mm residue and stop the print if there is a failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-levelling:\u003c\/strong\u003e the floating screen compensates for unevenness of up to 240 μm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic resin refilling\u003c\/strong\u003e before and during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin heating (optional):\u003c\/strong\u003e with the RS heated vat, the resin goes from 10 to 22 °C in 20 minutes and stays there. This vat is not included with the printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHeyGears Blueprint software\u003c\/h3\u003e\n\u003cp\u003eThe RS Turbo is operated with \u003cstrong\u003eBlueprint Studio\u003c\/strong\u003e (Windows and macOS). HeyGears says pre-processing takes one minute: one-click slicing, automatic mesh repair (inverted normals, holes, intersecting faces) and automatic scaffold-style supports that detach less often. There are pre-tuned profiles for HeyGears resins, including a 30 μm one for miniatures. You can send jobs and monitor print progress from your computer or phone.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: resins, open materials and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eThe RS Turbo works at \u003cstrong\u003e405 nm\u003c\/strong\u003e. HeyGears lists it as compatible with these UltraPrint resins: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-parp10-prototipado-rapido-1kg\"\u003ePARP10\u003c\/a\u003e, PAWR10, PAU11, PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e. To get started, HeyGears recommends PAS10 for everyday use, PAF10 for miniatures with thin parts and PAP10 for highly detailed models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is not compatible\u003c\/strong\u003e with the range's engineering resins: PAT10 clear, PAC10 castable, PAU20, PAH270, PAE10 or PAM10. If you need them, take a look at the Reflex Turbo or the Reflex 2 Pro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThird-party resins:\u003c\/strong\u003e the RS Turbo supports \u003cstrong\u003eOpen Material mode\u003c\/strong\u003e. In Blueprint you select \"Open Material\" and adjust exposure, light intensity (limited to 12-17 W\/m² to protect the machine) and dimensional compensation. HeyGears says that simply adjusting exposure works for most 405 nm UV resins on the market. It is intended for experienced users, and the hardware warranty is maintained under HeyGears' terms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e this is optional. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003ePulsing Release Module kit for RS and RS Turbo\u003c\/a\u003e includes the module and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eheated Pulsing Release RS vat\u003c\/a\u003e. It inflates and deflates the vat film on each layer and reduces peel force by around 50%. With PAS10, HeyGears quotes 20-60% fewer supports and 25-54% fewer contact points. It works with PARP10, PAS10, PAP10, PAWR10, PAF10 and PAU11, not with PAWW10 or PAWW20, and is not recommended for walls of 3 mm or less. The vat can also be used without the module, just to heat the resin.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e10.3\" 8K Amber Screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative XY pixel\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±15 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e30-100 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ axis\u003c\/td\u003e\n\u003ctd\u003eC5 grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e380 × 360 × 584 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e180 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface languages\u003c\/td\u003e\n\u003ctd\u003eEnglish, Simplified Chinese and Japanese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's in the box\u003c\/h4\u003e\n\u003cp\u003ePrinter, power cable, part removal tool, resin vat, build plate, Allen key and scraper. The Pulsing Release Module and the heated vat are sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003ePrepare the model in Blueprint, choose the resin and its profile, and send the job. The printer levels itself, refills resin and monitors for residue on its own. Then wash and cure the parts: HeyGears offers the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, and you'll find more options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e. If you use water-washable resins, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/water-washable-3d-resins\"\u003ewater-washable resins\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRS series spare parts: resin vat, build plate, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex-rs\"\u003eAmber LCD screen\u003c\/a\u003e, screen protector, screen tape and Pulsing Release film.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one to choose? RS Turbo, Reflex Turbo or Reflex 2 Pro\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex RS Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex Turbo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReflex 2 Pro\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003ctd\u003e385+ nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume\u003c\/td\u003e\n\u003ctd\u003e222 × 122 × 228 mm\u003c\/td\u003e\n\u003ctd\u003e192 × 121 × 220 mm\u003c\/td\u003e\n\u003ctd\u003e230 × 144 × 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY pixel\u003c\/td\u003e\n\u003ctd\u003e29.7 μm\u003c\/td\u003e\n\u003ctd\u003e33 μm\u003c\/td\u003e\n\u003ctd\u003e40 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering resins (PAU20, PAH270, PAE10, PAC10)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module\u003c\/td\u003e\n\u003ctd\u003eYes, with Pulsing Release Module 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen Material mode\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNot announced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e20 kg\u003c\/td\u003e\n\u003ctd\u003e25 kg\u003c\/td\u003e\n\u003ctd\u003e29.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor miniatures, figures and detail, go for the RS Turbo. For 385 nm technical resins (clear, castable, PC-like, elastic, high-temperature), choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e, or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e if you also need extra height and batch production. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone who needs HeyGears engineering resins (PAU20, PAH270, PAE10, PAC10, PAT10): they are not compatible with the RS Turbo.\u003c\/li\u003e\n\u003cli\u003eParts taller than 228 mm or large batches of solid parts.\u003c\/li\u003e\n\u003cli\u003eAnyone who wants to connect the printer via Ethernet cable: the RS Turbo connects via USB and Wi-Fi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs the RS Turbo 385 nm or 405 nm?\u003c\/h4\u003e\n\u003cp\u003e405 nm, according to HeyGears' official spec sheet. The Reflex Turbo and the Reflex 2 Pro are the 385 nm models.\u003c\/p\u003e\n\u003ch4\u003eCan I use resins from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes, with Blueprint Studio's Open Material mode. HeyGears states that, by adjusting exposure, it supports most 405 nm UV resins on the market. It is intended for experienced users.\u003c\/p\u003e\n\u003ch4\u003eWhich HeyGears resins can I use?\u003c\/h4\u003e\n\u003cp\u003ePAS10, PAF10, PAP10, PARP10, PAWR10, PAU11, PAWW10 and PAWW20. Engineering resins such as PAT10, PAC10, PAU20, PAH270 or PAE10 are not compatible.\u003c\/p\u003e\n\u003ch4\u003eIs it good for miniatures?\u003c\/h4\u003e\n\u003cp\u003eThat's its main purpose. It has a 29.7 μm pixel, a 566:1 contrast screen and a pre-tuned 30 μm profile for HeyGears resins.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eOnly if you fit the heated Pulsing Release RS vat, which is sold separately. With it, the resin goes from 10 to 22 °C in 20 minutes.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eIt isn't required for any compatible resin. It helps reduce supports and contact points. It doesn't work with the water-washable PAWW10 and PAWW20 resins.\u003c\/p\u003e\n\u003ch4\u003eIs it hard to use if I'm coming from an Elegoo or an Anycubic?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears recommends it precisely for people upgrading from an entry-level printer: it levels itself, refills resin on its own and Blueprint generates supports automatically.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384200511825,"sku":"DIST-6971437942918","price":1174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-reflex-rs-turbo-impresora-3d-resina-8k.jpg?v=1792509501"},{"product_id":"heygears-ultracraft-cure-estacion-de-curado","title":"HeyGears UltraCraft Cure - 365 + 405 nm UV Curing Station with Heat","description":"\u003ch2\u003eHeyGears UltraCraft Cure: UV curing station for the Reflex series\u003c\/h2\u003e\n\u003cp\u003eThe UltraCraft Cure is the desktop curing station HeyGears has designed to complete the workflow of its Reflex printers: you print, wash in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and finish here. It cures with two wavelengths at once (365 nm for the surface and 405 nm for the interior), has a heating function up to 80 °C and a turntable so the light reaches the part from every side. With HeyGears resins it receives the parameters from Blueprint Studio, so you don't have to work out times yourself.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual wavelength:\u003c\/strong\u003e 365 nm to cure the surface and 405 nm for the interior of the part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring volume:\u003c\/strong\u003e 198 × 124 × 220 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat up to 80 °C:\u003c\/strong\u003e cures and heats at the same time, and also works as a drying oven.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo curing modes:\u003c\/strong\u003e high performance (more strength) and fast (sharper detail).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic curing:\u003c\/strong\u003e time and temperature linked to the HeyGears L3 printing strategy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable\u003c\/strong\u003e with 360° curing and a maximum load of 4 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wi-Fi and USB drive. Curing cycles of up to 60 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003ePost-curing is what turns a freshly washed part into a part with its final properties. With engineering resins the difference is very noticeable: an under-cured part stays soft, tacky or below the values on its technical data sheet. HeyGears cites a crosslinking rate above 90 % with this machine, because it cures and heats the inside and outside of the part at the same time.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone who has (or is going to have) a Reflex series printer and wants a repeatable process, with no stopwatch or test runs: design studios, prototyping workshops, small manufacturers of end-use parts and miniature painters who want the same result in every batch.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it for all Reflex and Reflex RS printers: \u003cstrong\u003eReflex, Reflex Turbo, Reflex RS and Reflex RS Turbo\u003c\/strong\u003e. It is also included in the \u003cstrong\u003eReflex 2 Combo\u003c\/strong\u003e (printer + Wash + Cure), so it's part of the Reflex 2 workflow too. We stock the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIt doesn't need the Pulsing Release Module and doesn't physically connect to the printer: it's a standalone machine that receives jobs via Wi-Fi or USB from Blueprint Studio.\u003c\/p\u003e\n\u003cp\u003eThe resins HeyGears lists as compatible with the Cure are \u003cstrong\u003ePAU10, PAT10, PAM10, PAP10, PAH10, PAWR10, PARP10 and PAS10\u003c\/strong\u003e. Mind the size: the usable volume is 198 × 124 × 220 mm, so very tall parts from the Reflex 2 Pro (which prints up to 350 mm high) won't fit whole.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCuring volume\u003c\/td\u003e\n\u003ctd\u003e198 × 124 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV wavelength\u003c\/td\u003e\n\u003ctd\u003e365 nm + 405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum temperature\u003c\/td\u003e\n\u003ctd\u003eup to 80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCuring time\u003c\/td\u003e\n\u003ctd\u003eup to 60 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum turntable load\u003c\/td\u003e\n\u003ctd\u003e4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi and USB drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e370 × 387 × 456 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay languages\u003c\/td\u003e\n\u003ctd\u003eEnglish, Simplified Chinese and Japanese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eUltraCraft Cure, turntable, turntable base and power cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e a stable, level table, away from direct sunlight and with a power socket nearby. HeyGears recommends working at 18-25 °C with humidity below 50 %.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e fit the base and turntable onto the chamber shaft, plug in the cable and switch on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e on the machine go to Setup \u0026gt; Wi-Fi and finish the setup from the BlueprintGo app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring:\u003c\/strong\u003e send the job from Blueprint Studio, press the knob to receive it, choose the mode and start. If you want your own values, \"Customize\" at the end of the list lets you set time and temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e place them already washed on the turntable (with or without supports, as you prefer) and close the door. Don't open it while curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs a reference, HeyGears gives 30 minutes for PAU10 and 15 minutes for PAM10 with automatic curing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry, in water or with inert gas.\u003c\/strong\u003e In fast mode you can cure dry or with the part submerged in water. For water curing HeyGears recommends a glass container with good light transmission and warns that if water gets into the machine, the warranty doesn't cover the damage. It also has a tube inlet for introducing nitrogen or another inert gas, which according to the manufacturer improves surface finish and dimensional stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOven mode.\u003c\/strong\u003e Choose \"Bake\", set time and temperature and hang the parts on the hooks of the baking bar or leave them on the turntable. HeyGears suggests it for drying paint and coatings, curing silicone moulds, preheating resin or speeding up adhesive setting.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe chamber gets hot: don't cover or touch the air outlet and be careful when removing freshly baked parts.\u003c\/li\u003e\n\u003cli\u003eIf there is residual light when you open the door, don't look at it directly. HeyGears recommends wearing safety glasses.\u003c\/li\u003e\n\u003cli\u003eHandle uncured parts with nitrile gloves, as with any resin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one to choose?\u003c\/h3\u003e\n\u003cp\u003eFor the Reflex series, HeyGears offers two complementary post-processing machines. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e washes by vibration with ethanol and the Cure cures and heats. Together they receive each resin's parameters from Blueprint Studio, which is what HeyGears calls its \"one-stop\" production workflow. If you also print in an enclosed space, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-sistema-de-purificacion\"\u003eUltraCraft GreenPrint\u003c\/a\u003e purifier reduces volatile organic compounds in the air. You'll find other options in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e section.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you don't use HeyGears printers or resins: automatic curing gives you nothing extra and a generic curing station will cost you less.\u003c\/li\u003e\n\u003cli\u003eIf you print parts taller than 220 mm or wider than 198 × 124 mm.\u003c\/li\u003e\n\u003cli\u003eIf you need the menu in Spanish: the display is only available in English, Chinese or Japanese.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with non-HeyGears resins?\u003c\/h4\u003e\n\u003cp\u003eYou can set time and temperature manually, so it can cure any part that fits in the chamber. The automatic profiles are designed for HeyGears resins, and the manufacturer only lists compatibility for its own range.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between high performance mode and fast mode?\u003c\/h4\u003e\n\u003cp\u003eHigh performance mode aims for the part's maximum mechanical strength. Fast mode prioritises detail sharpness and is the one that lets you cure dry or in water.\u003c\/p\u003e\n\u003ch4\u003eDo I have to remove the supports before curing?\u003c\/h4\u003e\n\u003cp\u003eIt's not required. HeyGears says you can put in the washed parts with or without supports, whichever suits you.\u003c\/p\u003e\n\u003ch4\u003eWhat is the heating function for?\u003c\/h4\u003e\n\u003cp\u003eDuring curing, it heats the part while it cures to improve its strength. In oven mode, it dries paint, cures silicone moulds or speeds up adhesives, up to 80 °C.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to use it?\u003c\/h4\u003e\n\u003cp\u003eNo. The Cure is independent of the printer and has nothing to do with the pulsing release module.\u003c\/p\u003e\n\u003ch4\u003eWill a Reflex 2 Pro part fit?\u003c\/h4\u003e\n\u003cp\u003eIf it measures less than 198 × 124 × 220 mm, yes. Parts that use the full height of the Reflex 2 Pro (350 mm) won't fit.\u003c\/p\u003e\n\u003ch4\u003eIs the menu in Spanish?\u003c\/h4\u003e\n\u003cp\u003eNo. The display is in English, Simplified Chinese or Japanese. It's operated with a single rotary knob and most jobs are launched from Blueprint Studio.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384201199953,"sku":"DIST-6971437941836","price":762.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-ultracraft-cure-estacion-curado-uv.jpg?v=1792509507"},{"product_id":"heygears-ultracraft-wash-estacion-de-lavado","title":"HeyGears UltraCraft Wash - Vibration Washing Station with 2 Boxes for Reflex Series","description":"\u003ch2\u003eHeyGears UltraCraft Wash: vibration washing station for the Reflex series\u003c\/h2\u003e\n\u003cp\u003eThe UltraCraft Wash is the parts washer HeyGears designed for its Reflex printers. Instead of spinning a basket or using ultrasound, it places the parts in a sealed wash box and vibrates it on the base. A wash takes 2 to 4 minutes, uses 95 % or higher ethanol, and the alcohol transfers from one box to the other without you having to touch it or pour it by hand. It's the first half of post-processing; the second is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration washing\u003c\/strong\u003e in 2 to 4 minutes. HeyGears compares it to an ultrasonic cleaner and claims 5 times the efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 80 % less washing liquid\u003c\/strong\u003e, according to the manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo wash boxes with lid and valve:\u003c\/strong\u003e the alcohol drains from one to the other and is reused.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash volume:\u003c\/strong\u003e 198 × 123 × 150 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing agent:\u003c\/strong\u003e 95 % or higher ethanol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic programs\u003c\/strong\u003e from Blueprint Studio, or manual time and speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wi-Fi and USB drive. 80 W power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eA resin part comes out of the printer covered in liquid resin. If you don't wash it properly, curing leaves tacky areas, detail is lost and the part never reaches its full properties. The problem with washing by hand is the alcohol: it gets dirty fast, splashes and smells. The Wash works with sealed boxes, moves the liquid by vibration and lets you reuse the alcohol for the first rough wash, which is where most of it is used up.\u003c\/p\u003e\n\u003cp\u003eIt's designed for Reflex series users who print often and want consistent washing every time: prototyping, end-use parts, miniatures and figures. Vibration is gentler on small parts than a basket spinning at high speed, although freshly printed parts are still fragile and need to be handled with care.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it for the \u003cstrong\u003eReflex, Reflex Turbo, Reflex RS and Reflex RS Turbo\u003c\/strong\u003e, and includes it in the \u003cstrong\u003eReflex 2 Combo\u003c\/strong\u003e (printer + Wash + Cure). You'll find it alongside our \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e printers.\u003c\/p\u003e\n\u003cp\u003eIt doesn't need the Pulsing Release Module and doesn't connect to the printer: it receives jobs via Wi-Fi or USB. With the Reflex, you can wash the entire build plate inside the box. With the others, the box has a usable volume of 198 × 123 × 150 mm: larger parts, or the Reflex 2 and Reflex 2 Pro build plates, won't fit.\u003c\/p\u003e\n\u003cp\u003eResins with compatibility published by HeyGears: \u003cstrong\u003ePAU10, PAT10, PAM10, PAP10, PAH10, PAWR10, PARP10 and PAS10\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash volume\u003c\/td\u003e\n\u003ctd\u003e198 × 123 × 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWashing agent\u003c\/td\u003e\n\u003ctd\u003eethanol (≥ 95 %)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash time\u003c\/td\u003e\n\u003ctd\u003e2 to 4 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference programs\u003c\/td\u003e\n\u003ctd\u003e4 min at 200 r\/min, or 2 min rough + 2 min fine at 180 r\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi and USB drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase dimensions\u003c\/td\u003e\n\u003ctd\u003e351 × 272 × 168 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e80 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay languages\u003c\/td\u003e\n\u003ctd\u003eEnglish, Simplified Chinese and Japanese\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eUltraCraft Wash base, 2 wash boxes, brush and power cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e stable, level table, away from direct sunlight, at 18-25 °C and with humidity below 50 %. The base vibrates and can shake the table: don't leave glasses or open containers nearby.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e on the machine, go to Setup \u0026gt; Wi-Fi, then finish in the BlueprintGo app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoading:\u003c\/strong\u003e place the parts in a box with the supports facing down and add ethanol until roughly 70 % of the parts are covered, without exceeding the MAX mark. Close and lock the lids of both boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e send the job from Blueprint Studio, place the box on the base, press the knob and start. Under \"Customize\" you can set time and speed manually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDraining:\u003c\/strong\u003e when it's done, stack the box on top of the empty one, open the liquid valve first and then the air inlet switch. The alcohol drains into the box below. If you do it the other way round, it may splash out through the switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNext wash:\u003c\/strong\u003e put the new parts in the empty box, stack the one holding the alcohol on top and repeat the step.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer's tips: wash only one build plate of parts at a time so they don't knock into each other, protect delicate parts with a shell when preparing the print, and remove supports after washing, not before. Don't leave parts in the alcohol for long: washes usually stay under 10 minutes. Clean the boxes and their grilles with the brush when resin builds up.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEthanol is flammable: keep the machine away from flames, sparks and heat sources.\u003c\/li\u003e\n\u003cli\u003eStore the box containing alcohol tightly closed and leave valves and air switches set to OFF.\u003c\/li\u003e\n\u003cli\u003eWear nitrile gloves when handling uncured parts and work in a ventilated area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eThe Wash only washes. To finish your parts you need to cure them, and the natural partner is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, which receives each resin's parameters just like the Wash. If you print in a closed room, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-sistema-de-purificacion\"\u003eUltraCraft GreenPrint\u003c\/a\u003e purifier helps with resin and alcohol fumes. If you use water-washable resins such as \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e, note that HeyGears doesn't include it in the Wash compatibility list. You'll find other washing options in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e section and supporting supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you want to wash with isopropyl alcohol: HeyGears only specifies 95 % or higher ethanol for this machine.\u003c\/li\u003e\n\u003cli\u003eIf you print parts larger than 198 × 123 × 150 mm.\u003c\/li\u003e\n\u003cli\u003eIf you don't have a HeyGears printer: the automatic programs won't be any use to you and a generic washer will be cheaper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWhat alcohol should I use?\u003c\/h4\u003e\n\u003cp\u003e95 % or higher ethanol. It's the only agent HeyGears specifies for the Reflex series UltraCraft Wash.\u003c\/p\u003e\n\u003ch4\u003eHow long does a wash take?\u003c\/h4\u003e\n\u003cp\u003eBetween 2 and 4 minutes with the HeyGears programs: a 4-minute cycle at 200 r\/min, or a double cycle of 2 minutes rough and 2 minutes fine at 180 r\/min.\u003c\/p\u003e\n\u003ch4\u003eHow many wash boxes does it come with?\u003c\/h4\u003e\n\u003cp\u003eTwo. One for the parts and alcohol, and an empty one into which you drain the alcohol when you're done so you can reuse it in the next wash.\u003c\/p\u003e\n\u003ch4\u003eCan I wash the entire build plate?\u003c\/h4\u003e\n\u003cp\u003eWith the Reflex, yes: HeyGears recommends placing it in the box with the bars facing up. The Reflex 2 and Reflex 2 Pro build plates are larger than the wash volume.\u003c\/p\u003e\n\u003ch4\u003eShould I remove the supports before or after washing?\u003c\/h4\u003e\n\u003cp\u003eAfter. Uncured parts are fragile and, without supports, they knock against each other and break more easily during washing.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The Wash works on its own and doesn't depend on the pulsing release module.\u003c\/p\u003e\n\u003ch4\u003eIs the menu in Spanish?\u003c\/h4\u003e\n\u003cp\u003eNo. The display is in English, Simplified Chinese or Japanese. It's operated with a single knob: turn to navigate, press to confirm and hold to go back.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384201331025,"sku":"DIST-21026971437942086","price":424.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-ultracraft-wash-estacion-lavado-vibracion.jpg?v=1792509512"},{"product_id":"heygears-ultracraft-sistema-de-purificacion","title":"HeyGears UltraCraft GreenPrint - VOC Air Purifier for Resin 3D Printing","description":"\u003ch2\u003eHeyGears UltraCraft GreenPrint: air purifier for 3D printing spaces\u003c\/h2\u003e\n\u003cp\u003eThe UltraCraft GreenPrint is a HeyGears purifier designed for the air in a room with resin printers. It targets the volatile organic compounds (VOCs) released by resin and alcohol during printing and post-processing. Instead of trapping them in a carbon filter that becomes saturated, it breaks them down through photocatalysis and a degradation reaction until only CO₂ and water remain. That's why it doesn't need expensive replacement filters: just a few dust strips that you change every few months, and they already come in the box.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC degradation by photocatalysis:\u003c\/strong\u003e destroys pollutants instead of accumulating them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 % TVOC reduction in 25 minutes\u003c\/strong\u003e in a 10 m² room (HeyGears lab data).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTVOC CADR:\u003c\/strong\u003e 34.17 m³\/h. Recommended for rooms under 30 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo carbon filters to replace:\u003c\/strong\u003e includes 10 dust strips for the pre-filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTVOC sensor\u003c\/strong\u003e with colour indicator: green, blue, yellow and red.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree speeds plus night mode\u003c\/strong\u003e, timer of up to 12 hours and control from the BlueprintGo app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect connection\u003c\/strong\u003e to Reflex 2 and Reflex 2 Pro via an air duct.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eIf you print in resin at home or in an office, you know the smell that lingers in the room. That smell is VOCs, and with several printers running at once the concentration rises quickly. The GreenPrint works continuously. In HeyGears' test, with emissions equivalent to more than three printers, it brought the concentration back down to around 0,3 mg\/m³ in about two hours and kept it there.\u003c\/p\u003e\n\u003cp\u003eThe difference from a household carbon-filter purifier is maintenance. According to HeyGears, a conventional purifier lost around 30 % of its effectiveness in their 52-day test because the filter becomes saturated, while the GreenPrint lost 5.8 % over the same period and then stabilises. It's for small workshops, studios and hobbyists who print in a poorly ventilated room, especially if they have more than one printer.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAs a room purifier, it works with any printer: it cleans the air in the room, not inside a specific machine. HeyGears sells it for its Reflex series (Reflex, Reflex Turbo, Reflex RS and Reflex RS Turbo).\u003c\/p\u003e\n\u003cp\u003eWith the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e and the Reflex 2 there's an extra option: both have a port on the rear panel reserved for the purifier, and you can connect them with an air duct to extract air directly from the print chamber. The duct and connector parts are not included. HeyGears publishes the part files (so you can print them on the Reflex itself) and the list of everything else: a collapsible duct with a 40 mm inner diameter and about 1.2 m long, four 2,9 × 6.5 mm screws and PET tape or clear tape. The Pulsing Release Module is not required.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e270 × 270 × 520 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e24 V ⎓ 3,5 A (adapter included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e84 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeeds\u003c\/td\u003e\n\u003ctd\u003e3 + night mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e47-60 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVOC CADR\u003c\/td\u003e\n\u003ctd\u003e34.17 m³\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended area\u003c\/td\u003e\n\u003ctd\u003eunder 30 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWi-Fi\u003c\/td\u003e\n\u003ctd\u003e2,4 GHz only, BlueprintGo app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003epurifier, 10 dust strips, power adapter, power cable, quick guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSetup and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnboxing:\u003c\/strong\u003e remove the four foam strips from the top and the tape from the rear cover. Open the cover, take out the inner foam and remove the bags from the two photocatalytic modules. Reinstall them in order (number 2 at the bottom and number 1 at the top), connect their power and close the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower on:\u003c\/strong\u003e it starts at speed 2 and runs a 180-second warm-up with a countdown. It then displays the TVOC concentration, speed and timer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp:\u003c\/strong\u003e press and hold the power and speed buttons together for two seconds and add the device as \"Purification Unit\" in BlueprintGo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust strips:\u003c\/strong\u003e HeyGears recommends replacing them every 3-6 months. Wrap them around the photocatalytic module with the velvety side facing out, covering the entire air intake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay codes:\u003c\/strong\u003e E0, rear cover not closed properly. E1, the unit is not upright. EE, check the photocatalytic module cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlace it on the floor, upright and on a level surface. Switch it off and unplug it before opening the rear cover or setting up the direct connection to the printer. A purifier helps, but it doesn't replace ventilation, gloves or protective equipment when handling resin.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eThe GreenPrint completes the Reflex series workstation alongside the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e: one washes, one cures and this one cleans the air in the room. If you have a Reflex 2 or Reflex 2 Pro, the direct connection is well worth setting up. With printers from other brands it works just the same, as a room purifier.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you print in a space larger than 30 m² or in a warehouse: it won't be enough.\u003c\/li\u003e\n\u003cli\u003eIf you're looking for a particle filter for FDM or laser machines: HeyGears designs it for VOCs and publishes no data on fine particles or smoke.\u003c\/li\u003e\n\u003cli\u003eIf you expect it to completely eliminate the need for ventilation: it reduces VOCs, but ventilation is still recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it need replacement filters?\u003c\/h4\u003e\n\u003cp\u003eIt has no carbon filters. You only need to replace the dust strips every 3-6 months, and 10 come in the box.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with printers from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes. As a room purifier, it cleans the air in the room regardless of the printer. The direct duct connection is only designed for Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eWhat do I need to connect it to the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eA collapsible duct with a 40 mm inner diameter, four 2,9 × 6.5 mm screws, PET or clear tape and four connector parts that HeyGears provides as printable files. You open the port on the printer's rear panel and connect it to the purifier.\u003c\/p\u003e\n\u003ch4\u003eWhat area does it cover?\u003c\/h4\u003e\n\u003cp\u003eHeyGears recommends it for rooms under 30 m². The 92 % reduction in 25 minutes figure was measured in 10 m².\u003c\/p\u003e\n\u003ch4\u003eIs it noisy?\u003c\/h4\u003e\n\u003cp\u003eBetween 47 and 60 dB(A) depending on the speed. It has a night mode for when you're not printing.\u003c\/p\u003e\n\u003ch4\u003eCan I control it from my phone?\u003c\/h4\u003e\n\u003cp\u003eYes, with the BlueprintGo app. It only connects to 2,4 GHz Wi-Fi networks.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384201888081,"sku":"DIST-6971437942963","price":584.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-ultracraft-greenprint-purificador-aire-resina.jpg?v=1792509519"},{"product_id":"heygears-pulsing-release-module-kit-reflex-rs","title":"HeyGears Pulsing Release Module Kit for Reflex RS and RS Turbo - Module + Heated Vat","description":"\u003ch2\u003ePulsing Release Module Kit for Reflex RS and RS Turbo\u003c\/h2\u003e\n\u003cp\u003eOfficial HeyGears kit for fitting the pulsing release module to a \u003cstrong\u003eReflex RS or Reflex RS Turbo\u003c\/strong\u003e. It includes the two parts you need: the module and the vat that works with it. The module inflates and deflates the vat film in cycles, cutting the peel force on each layer by around 50 %. With less force, your print needs fewer supports.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pulsing Release Module (first generation).\u003c\/li\u003e\n\u003cli\u003e1 Reflex RS Heated \u0026amp; Pulsing Release vat: heated and fitted with pulsing film.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e and Reflex RS. Neither comes with it as standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro, which use the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2\u003c\/a\u003e. For Reflex and Reflex Turbo there is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003eReflex kit\u003c\/a\u003e, with a different vat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn the RS the module is optional. HeyGears lists it as compatible with PARP10, PAS10, PAP10, PAWR10, PAF10 and PAU11, and it does not work with the water-washable PAWW10 and PAWW20. The resins that require it on other Reflex models (PAC10, PAE10, PAU20, PAH270) are not listed as compatible with the RS, even with the module. It is also not recommended for walls of 3 mm or less.\u003c\/p\u003e\n\n\u003ch3\u003eWhat you gain\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBetween 20 % and 60 % fewer supports.\u003c\/li\u003e\n\u003cli\u003eBetween 25 % and 54 % less support contact area: less sanding.\u003c\/li\u003e\n\u003cli\u003eMore leeway with complex models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are HeyGears figures with PAS10 on a large model. The vat heats the resin from 10 °C to 22 °C in about 20 minutes and keeps it there.\u003c\/p\u003e\n\n\u003ch3\u003eModule specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC. Power: 25 W.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm. Weight: 3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003eThe module sits next to the printer and connects to the rear port with its air tube and cable. You swap the standard vat for the pulsing vat and select the module in Blueprint Studio when you create the project. The vat also works without the module to heat the resin: in Blueprint Studio, select \"No Add-on Module\". The wear part is the film: when it gets scratched or leaks resin, you replace the RS pulsing film, not the kit. If the vat gets damaged, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eRS pulsing vat\u003c\/a\u003e is available separately.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eNo. The Reflex 2 and Reflex 2 Pro only work with the Pulsing Release Module 2.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference from the Reflex kit?\u003c\/h4\u003e\n\u003cp\u003eThe module is the same; the vat is different. This kit comes with the RS heated vat, which doesn't fit the Reflex.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAC10 or PAE10 on the RS with the kit?\u003c\/h4\u003e\n\u003cp\u003eNot according to HeyGears' table: those resins are not listed as compatible with the RS. For them, there's the Reflex Turbo or the Reflex 2 Pro with its module.\u003c\/p\u003e\n\u003ch4\u003eCan I use the vat without the module?\u003c\/h4\u003e\n\u003cp\u003eYes, as a heated vat, by selecting \"No Add-on Module\" in Blueprint Studio.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with water-washable resins?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears advises against using it with PAWW10 and PAWW20.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202051921,"sku":"DIST-21026971437942109","price":815.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-kit-reflex-rs.jpg?v=1792509522"},{"product_id":"heygears-pulsing-release-module-kit-reflex","title":"HeyGears Pulsing Release Module Kit for Reflex and Reflex Turbo - Module + Tank","description":"\u003ch2\u003ePulsing Release Module Kit for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eOfficial HeyGears kit for adding the pulsing release module to a \u003cstrong\u003eReflex or Reflex Turbo\u003c\/strong\u003e. It includes the module and the matching vat. The module inflates and deflates the vat film in cycles, reducing the peel force on each layer by around 50 %. On these printers, it's the key to HeyGears' most demanding engineering resins.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pulsing Release Module (first generation).\u003c\/li\u003e\n\u003cli\u003e1 Reflex Pulsing Release vat with automatic heating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. Neither comes with it as standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex RS and RS Turbo, which use a different vat. For those printers, choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003eRS kit\u003c\/a\u003e. Not compatible with Reflex 2 or Reflex 2 Pro either, which use the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eResins\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for:\u003c\/strong\u003e \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e. Without the module, you can't print them on the Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional\u003c\/strong\u003e with all other Reflex resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the water-washable resins PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot recommended for walls of 3 mm or thinner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you gain\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears, you get 25 % fewer supports and up to 20 % faster prints with some resins (data based on PAU10). Fewer supports mean less wasted resin and less sanding.\u003c\/p\u003e\n\n\u003ch3\u003eModule specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003eThe module sits next to the printer and connects to its rear port via the air tube and cable. Swap the standard vat for the pulsing vat, then select the module in Blueprint Studio when you create your project. HeyGears sells a dedicated screen tape for printing with the pulsing vat on the Reflex.\u003c\/p\u003e\n\u003cp\u003eThe consumable part is the vat film. If it gets scratched or leaks resin, you replace the film, not the whole kit. If the vat itself gets damaged, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003eReflex pulsing vat\u003c\/a\u003e is available separately.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need it to print PAC10 or PAE10?\u003c\/h4\u003e\n\u003cp\u003eYes. On the Reflex and Reflex Turbo, PAC10, PAE10, PAU20 and PAH270 can only be printed with the module.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference from the RS kit?\u003c\/h4\u003e\n\u003cp\u003eThe module is the same; only the vat is different. Each vat only fits its own printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eNo. The Reflex 2 series uses the Pulsing Release Module 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with water-washable resins?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears advises against using it with PAWW10 and PAWW20.\u003c\/p\u003e\n\u003ch4\u003eDoes the Reflex Turbo come with the module?\u003c\/h4\u003e\n\u003cp\u003eNo. No Reflex includes it in the box. It's sold separately.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202182993,"sku":"DIST-21026971437942055","price":768.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-kit-reflex-turbo.jpg?v=1792509526"},{"product_id":"heygears-pulsing-release-module-kit-reflex-2","title":"HeyGears Pulsing Release Module 2 Kit for Reflex 2 and Reflex 2 Pro - Module + Tank","description":"\u003ch2\u003ePulsing Release Module 2 Kit for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eComplete HeyGears kit for adding pulsing release to a \u003cstrong\u003eReflex 2 or Reflex 2 Pro\u003c\/strong\u003e: it includes the second-generation module and the pulsing tank. The module inflates and deflates the tank film in cycles, reducing the peel force on each layer by around 50 %. It's the option for you if you have neither of the two parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pulsing Release Module 2.\u003c\/li\u003e\n\u003cli\u003e1 Pulsing Release tank for the Reflex 2 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you already have the tank, all you need is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003ePulsing Release Module 2 without tank\u003c\/a\u003e. If you're only missing the tank, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 pulsing tank\u003c\/a\u003e is also available.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. Neither includes it in the box: they come with the standard tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex RS and RS Turbo, which use the first-generation module (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003eReflex kit\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003eRS kit\u003c\/a\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eResins\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for:\u003c\/strong\u003e \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e and PAE20.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional\u003c\/strong\u003e with all other Reflex resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImprovements over the first module\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore precise pulse control and better surface finish on pillars of 1 mm or less.\u003c\/li\u003e\n\u003cli\u003eFewer layer lines on walls of 3 mm or less.\u003c\/li\u003e\n\u003cli\u003eBetween 20 % and 60 % fewer supports.\u003c\/li\u003e\n\u003cli\u003eCritical support angle from 15°.\u003c\/li\u003e\n\u003cli\u003eBetween 25 % and 54 % less sanding time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eModule specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC. Power: 25 W.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm. Weight: 3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eOn the tank, remove the protective film from the base and the four dust stickers from the air channels. Do not remove the two bottom tapes. On the module, open the filter cover, take out the cotton and the rubber plug, and close it again. With the printer switched off, connect the air tube and the cable at the back. Switch it on, fit the tank, scraper and build plate, and select the module in Blueprint Studio when creating the project. When printing, the printer detects the module automatically. The part that wears with use is the tank film, which HeyGears sells separately.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eKit or module without tank?\u003c\/h4\u003e\n\u003cp\u003eThe kit includes the module and the tank. The module without tank is just the device, for those who already have the Reflex 2 pulsing tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with my Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. For the RS there's the first-generation kit with its heated tank.\u003c\/p\u003e\n\u003ch4\u003eDoes the Reflex 2 Pro come with it as standard?\u003c\/h4\u003e\n\u003cp\u003eNo. It comes with the standard tank and the heated scraper; the module is sold separately.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAWW20 with the module fitted?\u003c\/h4\u003e\n\u003cp\u003eNo. For water-washable resins, use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eWhat wears out with use?\u003c\/h4\u003e\n\u003cp\u003eThe tank film. When it gets scratched or leaks resin, you replace the film or the tank, not the module.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202707281,"sku":"DIST-21026971437943519","price":815.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-2-kit-reflex-2.jpg?v=1792509531"},{"product_id":"heygears-pulsing-release-module-reflex-2-sin-tanque","title":"HeyGears Pulsing Release Module 2 for Reflex 2 and Reflex 2 Pro - Module without Tank","description":"\u003ch2\u003ePulsing Release Module 2 for Reflex 2 and Reflex 2 Pro, without tank\u003c\/h2\u003e\n\u003cp\u003eThis is \u003cstrong\u003eonly the module\u003c\/strong\u003e: the HeyGears Pulsing Release Module 2, \u003cstrong\u003ewithout tank\u003c\/strong\u003e. To work, it needs the Reflex 2 series Pulsing Release tank. If you don't have one, go for the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e, which includes both parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included and what's not\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 Pulsing Release Module 2 (the unit that generates the air pulses).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e the tank. It's available separately as the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 pulsing tank\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt makes sense if you already have the tank, if you're setting up the system on a second Reflex 2 with its own tank, or if you need to replace the module.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, with the Reflex 2 series Pulsing Release tank. Neither comes with the module as standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex RS and RS Turbo, which use the first-generation module (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003eReflex kit\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003eRS kit\u003c\/a\u003e).\u003c\/li\u003e\n\u003cli\u003e\nIt does \u003cstrong\u003enot\u003c\/strong\u003e work with the standard Reflex 2 tank: the module inflates and deflates the film of a tank specifically designed for it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eIt reduces the peel force of each layer from the film by around 50 %. According to HeyGears, it allows 20 % to 60 % fewer supports, support angles from 15° and a better surface finish on fine pillars and thin walls. On the Reflex 2 and 2 Pro it is \u003cstrong\u003erequired\u003c\/strong\u003e for \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e and PAE20, and it is not compatible with the water-washable resins PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC. Power: 25 W.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm. Weight: 3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBefore first use, open the module's filter cover, remove the cotton and the rubber plug, and close it again. With the printer switched off, connect the air tube and the power cable at the back, paying attention to the connector slot. Switch on, fit the pulsing tank, the scraper and the build plate, and select the module in Blueprint Studio when creating the project. The printer automatically checks that it's connected when the print starts.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between this module and the kit?\u003c\/h4\u003e\n\u003cp\u003eThe kit includes the module and the pulsing tank. This product is the module only and needs a Reflex 2 pulsing tank that you already have or buy separately.\u003c\/p\u003e\n\u003ch4\u003eCan I use it with the standard Reflex 2 tank?\u003c\/h4\u003e\n\u003cp\u003eNo. It only works with the Reflex 2 series Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex RS or the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. Those printers use the first-generation module.\u003c\/p\u003e\n\u003ch4\u003eDoes the Reflex 2 Pro come with it as standard?\u003c\/h4\u003e\n\u003cp\u003eNo. It comes with the standard tank; the module and pulsing tank are sold separately.\u003c\/p\u003e\n\u003ch4\u003eDo I need it to print PAC10?\u003c\/h4\u003e\n\u003cp\u003eYes. On the Reflex 2 series, PAC10, PAE10, PAU20, PAH270 and PAE20 can only be printed with the module.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202936657,"sku":"DIST-6971437943519","price":584.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-2-sin-tanque-reflex-2.jpg?v=1792509537"},{"product_id":"heygears-pantalla-lcd-reflex-2","title":"HeyGears Reflex 2 Series LCD Screen - 10.7\" Replacement LCD Screen for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears LCD Screen for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the official HeyGears replacement LCD screen for the Reflex 2 series: 10.7 inches, with an anti-scratch film and the screen tape pre-applied at the factory. It fits both the Reflex 2 and the Reflex 2 Pro, which share the same 10.7\" screen and a 230 × 144 mm build area.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e HeyGears Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10.7 inches, with anti-scratch film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-applied tape:\u003c\/strong\u003e no need to stick it on by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e modular design, secured with six screws and a T-handle wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich screen does the Reflex 2 series use?\u003c\/h3\u003e\n\u003cp\u003eThe Reflex 2 and Reflex 2 Pro ship with the Amber Screen Pro. According to HeyGears, it keeps contrast and light transmittance within 10% deviation after 6,000 printing hours (around 12 months at 16 hours a day). It uses a large-molecule liquid crystal layer and dyed polarizers that are more UV-resistant, and withstands 10,000 cycles at 40 kg without damage thanks to reinforced support pillars.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eReplace it if the screen is broken, scratched or not projecting properly. To check, HeyGears recommends placing a sheet of white paper on top, going into settings and running \u003cem\u003eTray Cleaning\u003c\/em\u003e, which projects an image across the entire surface. If you see dead areas, lines or spots, it's time to inspect it.\u003c\/p\u003e\n\n\u003ch3\u003eHow to install it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurn off the printer and unplug it from the power supply.\u003c\/li\u003e\n\u003cli\u003eRemove the rubber plugs with tweezers or a flat-head screwdriver.\u003c\/li\u003e\n\u003cli\u003eLoosen the six screws one by one with the T-handle wrench and remove them. Do not use an electric screwdriver.\u003c\/li\u003e\n\u003cli\u003eTake out the old screen without dropping screws or debris inside.\u003c\/li\u003e\n\u003cli\u003ePeel off the bottom protective film from the new screen, connect it, put it in place and remove the front film.\u003c\/li\u003e\n\u003cli\u003eWith the paper on top, power on and run \u003cem\u003eTray Cleaning\u003c\/em\u003e. If the image looks good, power off and tighten the screws with their washers.\u003c\/li\u003e\n\u003cli\u003eRefit the plugs and clean the screen with glass cleaner and a lint-free cloth, always wiping in one direction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eBefore fitting the vat, make sure there's nothing on the screen. If resin spills, use alcohol on a lint-free cloth and wipe in one direction only. You'll find isopropyl alcohol in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eEach Reflex family has its own screen and they are not interchangeable. For the Reflex RS and RS Turbo (10.3\"), choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex-rs\"\u003eAmber screen for Reflex RS\u003c\/a\u003e; for the Reflex and Reflex Turbo, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex\"\u003eAmber screen for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt doesn't fit the Reflex, Reflex Turbo, Reflex RS or RS Turbo, or printers from other brands. If you're not comfortable with a screwdriver, it's best to have someone experienced do it.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it fit the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it for the entire Reflex 2 series: Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eDo I need to buy screen tape separately?\u003c\/h4\u003e\n\u003cp\u003eNo. The screen comes with the tape already applied.\u003c\/p\u003e\n\u003ch4\u003eDoes it need to be calibrated with any tool?\u003c\/h4\u003e\n\u003cp\u003eThe official replacement guide for the Reflex 2 series doesn't require a calibration tool. It ends with the image test and cleaning.\u003c\/p\u003e\n\u003ch4\u003eHow long does it last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Amber Screen Pro of the Reflex 2 series at over 6,000 printing hours. Actual lifespan depends on usage.\u003c\/p\u003e\n\u003ch4\u003eCan I replace it myself?\u003c\/h4\u003e\n\u003cp\u003eYes, if you follow the steps carefully: printer powered off, screws removed with the T-handle wrench and an image test before tightening.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on a Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS uses a different 10.3-inch screen.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203067729,"sku":"DIST-6971437943410","price":317.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pantalla-lcd-reflex-2-recambio.jpg?v=1792509539"},{"product_id":"heygears-pantalla-lcd-amber-reflex-rs","title":"HeyGears Reflex RS Amber LCD Screen - Replacement Amber Screen for Reflex RS and RS Turbo","description":"\u003ch2\u003eHeyGears Amber Screen for Reflex RS and Reflex RS Turbo\u003c\/h2\u003e\n\u003cp\u003eReplacement Amber LCD screen for the Reflex RS family. On the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e it's the screen fitted at the factory, so it's a direct replacement. On the Reflex RS, which ships with a standard LCD, it's an upgrade: HeyGears also sells the RS in a \"with Amber Screen\" version.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the Amber screen is\u003c\/h3\u003e\n\u003cp\u003e\"Amber\" is the name HeyGears gives to its in-house LCD designed for the Reflex printers. According to the manufacturer, this is what sets it apart:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e566:1 contrast ratio\u003c\/strong\u003e, thanks to a composite design with a dyed polarizer and optical films.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarizer dyed with dye macromolecules:\u003c\/strong\u003e better control of the light passing through, with less overexposure and underexposure, and sharper edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical film that lets light through at 90°:\u003c\/strong\u003e less stray light on the layer being cured and cleaner surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger lifespan:\u003c\/strong\u003e these molecules withstand UV and heat better, contrast degrades less, and HeyGears quotes over 1 million printed layers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe official Amber screen set for the RS includes the screen with its tempered glass protector already fitted and two LCD screen tapes.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex RS Turbo and Reflex RS (10.3\" screen).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 or Reflex 2 Pro. Each family has its own screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e the screen doesn't require it. If you print with the module, HeyGears offers a dedicated screen tape for it (\u003cem\u003ePulsing Screen Tape\u003c\/em\u003e); check which one you're fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eIf it's cracked or scratched, if it projects uncured areas, or if you have an RS with the standard screen and want more contrast and a longer lifespan.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and calibration\u003c\/h3\u003e\n\u003cp\u003eHeyGears asks you to follow the instructions carefully and, if needed, seek professional help. The official \u003cem\u003eReflex RS Amber Screen Installation\u003c\/em\u003e video is available on the HeyGears wiki and in the Blueprint Studio help center. After the swap, the RS reads the new screen's calibration data via NFC and adjusts the light intensity to keep variations below 5 %. HeyGears also sells a kit with an LED calibration tool to calibrate uniformity and intensity.\u003c\/p\u003e\n\u003cp\u003eTo protect it, there's the screen protector for Reflex RS, and to replace the tape, the Reflex RS screen tape.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex or Reflex Turbo, yours is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex\"\u003eAmber screen for Reflex\u003c\/a\u003e. If you have a Reflex 2 or 2 Pro, you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-reflex-2\"\u003eReflex 2 series LCD screen\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eCan I fit the Amber screen to a regular Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it for the Reflex RS Turbo and Reflex RS.\u003c\/p\u003e\n\u003ch4\u003eWhat do I gain over the standard screen?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears: 566:1 contrast, sharper edges, less stray light and a longer lifespan.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a tempered glass protector?\u003c\/h4\u003e\n\u003cp\u003eYes, the official set comes with the tempered protector already fitted and two screen tapes.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate it?\u003c\/h4\u003e\n\u003cp\u003eThe RS adjusts the intensity using the new screen's NFC data. For a full calibration, HeyGears offers an LED calibration module.\u003c\/p\u003e\n\u003ch4\u003eDo I need it to use the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The module works with the Pulsing Release tank, not with the screen.\u003c\/p\u003e\n\u003ch4\u003eHow long does it last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears quotes over 1 million printed layers. It depends on usage and how well you look after it.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203133265,"sku":"DIST-6971437942444","price":236.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pantalla-amber-reflex-rs.jpg?v=1792509540"},{"product_id":"heygears-pantalla-lcd-amber-reflex","title":"HeyGears Reflex Amber LCD Screen - Replacement Amber Screen for Reflex and Reflex Turbo","description":"\u003ch2\u003eHeyGears Amber Screen for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eReplacement Amber LCD screen for the first-generation Reflex. On the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e it's the factory-fitted screen, so it's a direct replacement. On the original Reflex it's an upgrade over the stock screen.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the Amber screen\u003c\/h3\u003e\n\u003cp\u003e\"Amber\" is the name HeyGears gives to its in-house LCD design for the Reflex printers. For the RS version, HeyGears explains that it combines a dyed polarizer and optical films to boost contrast and improve UV resistance. For the Reflex Amber screen, it gives two specific figures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22% more contrast\u003c\/strong\u003e than the previous Reflex screen.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2.5 times longer lifespan.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt's the same upgrade advertised for the Reflex Turbo, whose spec sheet lists it as a 9.25-inch Amber screen.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe official set includes the Amber screen with the tempered glass protector already fitted and two LCD screen tapes.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e HeyGears Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith the Pulsing Release Module:\u003c\/strong\u003e the screen works just the same, but HeyGears states that if you use the module, the screen tape must be the compatible version (\u003cem\u003eReflex Pulsing LCD Screen Tape\u003c\/em\u003e), designed for printing with the Pulsing Release tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCalibration: don't skip it\u003c\/h3\u003e\n\u003cp\u003eHeyGears warns that the LED calibration tool is essential for replacing the screen on the Reflex and recommends buying it if you don't have one. Its wiki has videos on uniformity and light intensity calibration. If you don't have the tool, ask us before ordering the screen.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eIf the screen is broken, scratched or leaves uncured areas, or if you have an original Reflex and want more contrast and a longer lifespan.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eHeyGears asks you to follow the instructions carefully and seek professional help if needed. The \u003cem\u003eReflex Amber Screen Installation\u003c\/em\u003e video is on the official wiki, under \"Maintenance \u0026amp; Part Replacement\". Always work with the printer switched off.\u003c\/p\u003e\n\u003cp\u003eTo protect your new screen, there's the tempered glass protector for Reflex, which is fitted using the Reflex screen tape.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex RS or RS Turbo, yours is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex-rs\"\u003eAmber screen for Reflex RS\u003c\/a\u003e. For Reflex 2 and 2 Pro, it's the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-reflex-2\"\u003eReflex 2 series LCD screen\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the original Reflex?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears sells it for the Reflex and Reflex Turbo.\u003c\/p\u003e\n\u003ch4\u003eWhat does it improve over the Reflex stock screen?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, 22% more contrast and a 2.5 times longer lifespan.\u003c\/p\u003e\n\u003ch4\u003eDo I need the LED calibration tool?\u003c\/h4\u003e\n\u003cp\u003eHeyGears considers it essential for replacing the screen on the Reflex.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a tempered glass protector?\u003c\/h4\u003e\n\u003cp\u003eYes, it comes pre-fitted. It also includes two screen tapes.\u003c\/p\u003e\n\u003ch4\u003eI use the Pulsing Release Module. Does anything change?\u003c\/h4\u003e\n\u003cp\u003eOnly the screen tape: HeyGears specifies the version compatible with the module.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS has its own Amber screen, in a different size.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203231569,"sku":"DIST-6971437942437","price":246.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pantalla-amber-reflex.jpg?v=1792509542"},{"product_id":"heygears-tanque-pulsing-release-reflex-rs","title":"HeyGears Reflex RS Heated \u0026 Pulsing Release Resin Tank - Heated Pulsing Release Tank for Reflex RS and RS Turbo","description":"\u003ch2\u003eHeyGears Heated \u0026amp; Pulsing Release Resin Tank for Reflex RS and RS Turbo\u003c\/h2\u003e\n\u003cp\u003eHeyGears calls it the \u003cem\u003eReflex RS Heated \u0026amp; Pulsing Release Resin Tank\u003c\/em\u003e, and it's a 2-in-1 tank: it heats the resin on its own and, if you have the Pulsing Release Module, it also handles pulsed peeling. On the Reflex RS and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e, it's also the only tank that works with automatic resin heating.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in heating:\u003c\/strong\u003e brings the resin from 10 °C to 22 °C in about 20 minutes and keeps it there throughout the print (HeyGears figure).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release:\u003c\/strong\u003e only with the Pulsing Release Module connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks without the module too:\u003c\/strong\u003e as a standard heated tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow Pulsing Release works\u003c\/h3\u003e\n\u003cp\u003eThe module periodically inflates and deflates the tank film. This cycle of positive and negative pressure reduces the peel force of each layer by around 50 %. According to HeyGears, with PAS10 this means between 20 % and 60 % fewer supports and between 25 % and 54 % less contact area.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Pulsing Release Module\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith the module:\u003c\/strong\u003e connect the Pulsing Release Module and select the module when slicing in Blueprint Studio. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003ePulsing Release Module kit for Reflex RS\u003c\/a\u003e already includes a tank like this one; this standalone tank works as a second tank or a replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithout the module:\u003c\/strong\u003e in Blueprint Studio, select \"No Add-on Module\" and the RS will enable heating automatically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResins compatible with the module on the RS:\u003c\/strong\u003e HeyGears lists PARP10, PAS10, PAP10, PAWR10, PAF10 and PAU11. The water-washable resins PAWW10 and PAWW20 are not compatible with the module.\u003c\/li\u003e\n\u003cli\u003eHeyGears does not recommend using the module for models with walls of 3 mm or less.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex, Reflex Turbo or the Reflex 2 series: each family has its own tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cp\u003eThe film and the tank don't have the same lifespan: if only the film fails, replace it with the Pulsing Release film set for Reflex RS. Replace the complete tank if the frame gets damaged or if you want one tank per resin so you don't have to keep emptying it.\u003c\/p\u003e\n\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the resin before and after every print. A leftover cured fragment can tear the film when the platform lowers.\u003c\/li\u003e\n\u003cli\u003eTo clean out residue, use the \u003cem\u003eResin Tank Cleaning\u003c\/em\u003e function and the residue tool that comes with the printer. Don't pull cured resin off by hand.\u003c\/li\u003e\n\u003cli\u003eThe official installation videos for the tank and the module on the RS are available on the HeyGears wiki.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eThe standard Reflex RS tank is cheaper, but it doesn't heat and doesn't support the module. If you print in a cold workshop or want to try Pulsing Release later on, this is the one to get.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to use it?\u003c\/h4\u003e\n\u003cp\u003eNo. Without the module, it works as a heated tank when you select \"No Add-on Module\" in Blueprint Studio.\u003c\/p\u003e\n\u003ch4\u003eDoes the standard RS tank heat the resin?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that automatic heating on the RS requires this tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex or Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. For those printers, there's the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003ePulsing Release tank for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eCan I use PAWW10 or PAWW20?\u003c\/h4\u003e\n\u003cp\u003eNot with the module active. HeyGears lists them as not compatible with the Pulsing Release Module.\u003c\/p\u003e\n\u003ch4\u003eCan the film be replaced on its own?\u003c\/h4\u003e\n\u003cp\u003eYes, it's sold separately in a pack of two.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take to heat up?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, from 10 °C to 22 °C in about 20 minutes.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203329873,"sku":"DIST-6971437942109","price":234.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-calefactado-pulsing-release-reflex-rs_313ec633-db7e-45ab-890a-56e38bc91cfc.jpg?v=1792509545"},{"product_id":"heygears-tanque-pulsing-release-reflex-2","title":"HeyGears Reflex 2 Series Pulsing Release Resin Tank - Pulsing Release Tank for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears Pulsing Release Tank for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the tank the Pulsing Release Module 2 needs to work on the Reflex 2 series. HeyGears states that the module must always be used with this tank: the standard Reflex 2 tank does not support pulse printing. It fits the Reflex 2 and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e Pulsing Release Module 2. The first-generation module is for the Reflex and RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEssential for:\u003c\/strong\u003e PAC10, PAE10, PAU20 and PAH270 on the Reflex 2 series, which HeyGears only allows with the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e easy to fit and swap, according to HeyGears.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat the Pulsing Release Module 2 does\u003c\/h3\u003e\n\u003cp\u003eThe module inflates and deflates the tank film to release each layer with roughly 50 % less force. HeyGears cites up to 60 % fewer supports, up to 54 % less contact area, pillars of 1 mm or less with a better finish, and thin walls of 3 mm or less with fewer layer lines.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you buy the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003ePulsing Release Module 2 without tank\u003c\/a\u003e, you need this tank.\u003c\/li\u003e\n\u003cli\u003eIf you buy the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit for Reflex 2\u003c\/a\u003e, one is already included; this one works as a second tank or a replacement.\u003c\/li\u003e\n\u003cli\u003eResins that require the module: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the module: PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e. Use the standard tank for these.\u003c\/li\u003e\n\u003cli\u003eNot suitable for the Reflex, Reflex Turbo, RS or RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTake the tank out, peel off the protective film on the back and remove the four dust-protection stickers from the air inlets.\u003c\/li\u003e\n\u003cli\u003eDo not remove the two tapes on the air channels on the underside.\u003c\/li\u003e\n\u003cli\u003eWith the printer switched off, connect the air tube and the module cable. Switch on and fit the tank, scraper and build plate.\u003c\/li\u003e\n\u003cli\u003eIn Blueprint Studio, create the project selecting the Pulsing Release Module. When printing, the machine checks that the module is connected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaintenance and when to replace it\u003c\/h3\u003e\n\u003cp\u003eCheck for cured residue before and after every print: it damages the film when the build plate lowers. HeyGears sells the Reflex 2 series Pulsing Release film separately, so you only need to replace the whole tank if the frame gets damaged or if you want one tank per resin. To heat the resin, the Reflex 2 series uses the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you only use standard, high-detail or water-washable resins, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex-2\"\u003estandard Reflex 2 tank\u003c\/a\u003e is all you need. If you are going to print castable, elastic, tooling or high-temperature resins, you need this tank with the module.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex RS Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The Reflex 2 series uses the Pulsing Release Module 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes, HeyGears lists it as compatible with the Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAH270 without this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears requires the Pulsing Release Module 2 for PAH270, and the module requires this tank.\u003c\/p\u003e\n\u003ch4\u003eWhat about water-washable resins?\u003c\/h4\u003e\n\u003cp\u003ePAWW10 and PAWW20 are not compatible with the module. Use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eCan I remove the tapes on the underside?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that the two tapes on the air channels must stay in place.\u003c\/p\u003e\n\u003ch4\u003eCan the film be replaced?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears sells it separately in a pack of two.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203428177,"sku":"DIST-6971437943458","price":234.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-pulsing-release-reflex-2.jpg?v=1792509546"},{"product_id":"heygears-tanque-pulsing-release-reflex","title":"HeyGears Reflex Pulsing Release Resin Tank - Pulsing Release Tank for Reflex and Reflex Turbo","description":"\u003ch2\u003eHeyGears Pulsing Release Tank for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eResin tank with Pulsing Release film for the first-generation Reflex. This is the tank the UltraCraft Pulsing Release Module works with on the Reflex and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. HeyGears states that the module must be used with this tank (or with the RS tank, on the RS).\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e UltraCraft Pulsing Release Module (first generation). The Reflex 2 series uses Module 2 and a different tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e HeyGears lists it as compatible with the Reflex's automatic heating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for:\u003c\/strong\u003e PAC10, PAE10, PAU20 and PAH270 on the Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat the Pulsing Release Module does\u003c\/h3\u003e\n\u003cp\u003eThe module periodically inflates and deflates the tank film. This cycle reduces the peel force of each layer by around 50 %. According to HeyGears, with PAU10 this means 25 % fewer supports and up to 20 % more speed with some resins. It is not recommended for models with walls of 3 mm or less.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e already includes a tank like this one. The standalone tank works as a replacement or lets you keep one per resin.\u003c\/li\u003e\n\u003cli\u003eResins that require the module: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the module: PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e. For these, use the standard tank.\u003c\/li\u003e\n\u003cli\u003eIf you use the module, HeyGears specifies a dedicated screen tape: \u003cem\u003eReflex Pulsing LCD Screen Tape\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003eNot suitable for the Reflex RS, RS Turbo or the Reflex 2 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe film and the tank don't last the same amount of time. The Pulsing Release film can be replaced on its own: HeyGears sells it in packs of two and has a replacement video on its wiki. Replace the complete tank if the frame gets damaged, or buy a second one so you don't have to empty it every time you switch resins.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe official \u003cem\u003ePulsing Release Module Installation\u003c\/em\u003e and \u003cem\u003ePulsing Release Film Replacement\u003c\/em\u003e videos are on the HeyGears wiki, in the Reflex section.\u003c\/li\u003e\n\u003cli\u003eCheck the resin before and after every print. A piece of cured residue can tear the film when the platform lowers.\u003c\/li\u003e\n\u003cli\u003eTo remove residue, use the \u003cem\u003eResin Tank Cleaning\u003c\/em\u003e function and the residue tool. Don't pull cured resin off by hand.\u003c\/li\u003e\n\u003cli\u003eTo clean the tank, use isopropyl alcohol and a lint-free cloth. You'll find them in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you only print standard or water-washable resins, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex\"\u003estandard Reflex tank\u003c\/a\u003e is all you need. For castable, elastic, tooling or high-temperature resins, you need this tank and the module.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work on the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the Reflex and Reflex Turbo.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release Module 2?\u003c\/h4\u003e\n\u003cp\u003eNo. Module 2 is for the Reflex 2 series, which has its own tank.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAC10 without the module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears requires the Pulsing Release Module for PAC10, PAE10, PAU20 and PAH270.\u003c\/p\u003e\n\u003ch4\u003eWhat about water-washable resins?\u003c\/h4\u003e\n\u003cp\u003ePAWW10 and PAWW20 are not compatible with the module. Use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eDo I need a different screen tape?\u003c\/h4\u003e\n\u003cp\u003eIf you print with the module, HeyGears specifies the \u003cem\u003eReflex Pulsing LCD Screen Tape\u003c\/em\u003e version.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS has its own \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eheated Pulsing Release tank\u003c\/a\u003e.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203690321,"sku":"DIST-6971437942055","price":196.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-pulsing-release-reflex_5e603acd-b97b-461b-8a32-ecc226e5ef7d.jpg?v=1792509549"},{"product_id":"heygears-tanque-de-resina-reflex-2","title":"HeyGears Reflex 2 Series Regular Resin Tank - Standard resin tank for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears Standard Resin Tank for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the regular Reflex 2 series tank, without Pulsing Release. It's easy to swap and works with both the Reflex 2 and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. It does not work with the Pulsing Release Module 2. For that, you need the Pulsing Release tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not require\u003c\/strong\u003e the Pulsing Release Module and does not work with it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResins:\u003c\/strong\u003e all Reflex 2 series resins that don't require the module, including water-washable ones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e on the Reflex 2 series, the resin is heated by the heated scraper, not by the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy get a second tank\u003c\/h3\u003e\n\u003cp\u003eWith one tank per resin, you don't have to empty and clean the tank every time you switch materials. It also gives you a spare if yours gets damaged. HeyGears even suggests stacking tanks of different resins using the platform's side drip rack.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the resins HeyGears marks as \"optional\" or \"no\" for the module: PAS10, PAP10, PAWR10, PAF10, PAU11, PAH10, PAM10, PAT10 and water-washable resins (such as \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e).\u003c\/li\u003e\n\u003cli\u003ePAC10, PAE10, PAU20 and PAH270 require the Pulsing Release Module 2 and its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003ePulsing Release tank for Reflex 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex, Reflex Turbo, RS or RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTake the tank out of the bag. There's a protective film under the release film. Peel it off slowly without pulling off the support pads.\u003c\/li\u003e\n\u003cli\u003eIf the rubber plugs under the tank stick out after shipping, press them back in.\u003c\/li\u003e\n\u003cli\u003eMake sure the screen is clean, place the tank on top and lock it in.\u003c\/li\u003e\n\u003cli\u003eFit the build platform and insert the scraper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecover leftover resin through a 120 mesh filter and pour it back into its bottle.\u003c\/li\u003e\n\u003cli\u003eScrape out any remaining resin with a spatula or scraper card.\u003c\/li\u003e\n\u003cli\u003eSpray alcohol or IPA inside and wipe with a lint-free cloth. You'll find alcohol in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eBefore refitting it, make sure there's no resin or cleaner residue left.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe release film has its own lifespan. HeyGears sells the Reflex 2 series film in packs of two, so you don't need to replace the whole tank if only the film fails. Replace the complete tank only if the frame is damaged.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eFor standard, high-detail or water-washable resins, choose this tank. If you want to print castable, elastic, tooling or high-temperature resins, you need the Pulsing Release tank with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e. To heat the resin, you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eHow is it different from the Pulsing Release tank?\u003c\/h4\u003e\n\u003cp\u003eThe Pulsing Release tank works with Module 2 and is required for PAC10, PAE10, PAU20 and PAH270. This tank is for printing without the module.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the entire Reflex 2 series.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAH270 with this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. PAH270 requires the Pulsing Release Module 2 and its tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with water-washable resins?\u003c\/h4\u003e\n\u003cp\u003eYes. Water-washable resins aren't compatible with the module, so they go in this tank. PAWW20 works on the Reflex 2 and 2 Pro. According to HeyGears' chart, PAWW10 works only on the Reflex 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eNo. On the Reflex 2 series, heating is done by the heated scraper.\u003c\/p\u003e\n\u003ch4\u003eCan I remove the film under the release film?\u003c\/h4\u003e\n\u003cp\u003eYes. It's a protective film that must be removed before use. Peel it off slowly without removing the pads.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203854161,"sku":"DIST-6971437943441","price":117.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-de-resina-reflex-2.jpg?v=1792509551"},{"product_id":"heygears-plataforma-perforada-reflex-2","title":"HeyGears Reflex 2 \/ 2 Pro - Perforated Stainless Steel Build Plate","description":"\u003ch2\u003eHeyGears Perforated Build Platform for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the original build platform for the Reflex 2 series: a 304 stainless steel plate full of holes, the same one that comes as standard with the printer. The holes let the resin drain better as the platform rises out of the vat. Use it as a replacement if yours has been damaged, or as a second platform so you can keep one printing while you remove parts from the other.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated design:\u003c\/strong\u003e helps liquid resin drain away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt's the same one that comes with the printer\u003c\/strong\u003e in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling:\u003c\/strong\u003e adjusted with the T-handle wrench supplied with the printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it only for the Reflex 2 and Reflex 2 Pro. It does not fit the Reflex, the Reflex Turbo or the Reflex RS family: each has its own platform (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-de-impresion-reflex\"\u003eReflex platform\u003c\/a\u003e and Reflex RS platform). It works the same with the standard vat, the Pulsing Release vat and the Pulsing Release Module 2: the platform doesn't change when you use the module.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the surface is damaged, bent or dented and parts no longer adhere properly.\u003c\/li\u003e\n\u003cli\u003eIf you work in batches: with a second clean platform you can start the next job without waiting to remove parts from and clean the first one.\u003c\/li\u003e\n\u003cli\u003eBefore blaming the platform when a part doesn't stick, check the usual suspects: debris in the vat or in the holes, a damaged film, old resin or low temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and levelling\u003c\/h3\u003e\n\u003cp\u003eYou mount it on the printer's holder and level it from the menu. These are the steps HeyGears gives for the Reflex 2 series:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure the platform and vat are clean, free of debris, and that both are locked in place. The scraper must be at the far right.\u003c\/li\u003e\n\u003cli\u003eGo to settings and select platform levelling. Use tweezers to remove the two rubber plugs from the top of the holder.\u003c\/li\u003e\n\u003cli\u003eWith the T-handle wrench, turn the holder screw in the direction shown on the screen until the value turns green.\u003c\/li\u003e\n\u003cli\u003eConfirm. The printer runs a check and, if needed, will ask you for a fine adjustment.\u003c\/li\u003e\n\u003cli\u003ePut the rubber plugs back and press OK to return the platform to its position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning and using a perforated platform\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the platform in a tray with 95% alcohol or IPA and wipe it with a lint-free cloth. You can spray alcohol into the holes.\u003c\/li\u003e\n\u003cli\u003eDry it with compressed air, including the holes, and check that no resin remains before printing again.\u003c\/li\u003e\n\u003cli\u003eUse rafts of at least 10 x 10 mm, no smaller than the part's cross-section and more than 1 mm thick. This prevents Blueprint Studio from generating supports right over a hole.\u003c\/li\u003e\n\u003cli\u003eFor small parts, group them in Blueprint Studio so they share a single raft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor alcohol and other cleaning supplies, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e section.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex 2 Series Perforated Build Platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex 2, Reflex 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437943465\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex, Reflex Turbo, Reflex RS or RS Turbo, this platform won't fit. It's also not for resin printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with both the Reflex 2 and the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with both.\u003c\/p\u003e\n\u003ch4\u003eIs it the same one that comes with the printer?\u003c\/h4\u003e\n\u003cp\u003eYes, it's the Reflex 2's standard platform. You buy it as a replacement or as a second platform.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex RS or the original Reflex?\u003c\/h4\u003e\n\u003cp\u003eNo. Each family has its own platform.\u003c\/p\u003e\n\u003ch4\u003eDo I need to level it after swapping it?\u003c\/h4\u003e\n\u003cp\u003eYes, level it from the settings menu using the T-handle wrench.\u003c\/p\u003e\n\u003ch4\u003eWhat are the holes for?\u003c\/h4\u003e\n\u003cp\u003eTo help the resin drain better. That's why you should use rafts of at least 10 x 10 mm and avoid placing supports over a hole.\u003c\/p\u003e\n\u003ch4\u003eHow do I clean it?\u003c\/h4\u003e\n\u003cp\u003eWith 95% alcohol or IPA and a lint-free cloth, getting alcohol into the holes, then drying it with air.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to use it?\u003c\/h4\u003e\n\u003cp\u003eNo. It works the same with or without the module.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204083537,"sku":"DIST-6971437943465","price":177.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-plataforma-perforada-reflex-2-acero-inoxidable.jpg?v=1792509556"},{"product_id":"heygears-plataforma-de-impresion-reflex","title":"HeyGears Reflex \/ Reflex Turbo - Stainless Steel Build Plate","description":"\u003ch2\u003eHeyGears steel build platform for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eGenuine replacement build platform for the HeyGears Reflex. It's a perforated 304 stainless steel plate: the holes let liquid resin drain back into the vat instead of pooling on the platform and your parts. Get it to replace a damaged platform, or as a second one so your printer keeps running while you remove parts.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated design:\u003c\/strong\u003e helps resin drain away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex build volume:\u003c\/strong\u003e 192 x 121 x 220 mm (HeyGears figure).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e replacement or second platform for batch printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it for the Reflex. The Reflex Turbo is the evolution of the Reflex, with an upgraded Amber screen, and HeyGears groups documentation and spare parts for both as \"Reflex\/Reflex Turbo\" (vats, films, tape and screen protector). It does not fit the Reflex RS family or the Reflex 2 series: for those, choose the Reflex RS platform or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-perforada-reflex-2\"\u003eReflex 2 perforated platform\u003c\/a\u003e. The platform stays the same whether you use the standard vat, the Pulsing Release vat or the Pulsing Release Module.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the surface is damaged or warped and parts no longer stick.\u003c\/li\u003e\n\u003cli\u003eIf you print in batches and want a clean platform ready for the next job.\u003c\/li\u003e\n\u003cli\u003eIf parts are falling off, check these first: debris in the vat or in the platform holes, a cloudy or damaged film, poorly stored resin or low temperature. HeyGears recommends 20-25 °C and humidity below 50 %.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and leveling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the platform on its holder with the vat clean and locked in place.\u003c\/li\u003e\n\u003cli\u003eLevel it from the printer menu. HeyGears has an official video, \"Reflex Build Platform Leveling\", on its wiki.\u003c\/li\u003e\n\u003cli\u003eTo remove the platform with parts without touching the resin, HeyGears sells a Platform Transfer Tool that is only compatible with the Reflex.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRafts and holes\u003c\/h3\u003e\n\u003cp\u003eWith a perforated platform, you need to pay attention to the raft. HeyGears recommends:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDon't print without a raft, or with a solid or skate-style raft: parts come loose more easily.\u003c\/li\u003e\n\u003cli\u003eA raft no smaller than the part's cross-section and at least 10 x 10 mm, so supports aren't generated over a hole.\u003c\/li\u003e\n\u003cli\u003eRaft thickness above 1 mm, so it comes off in one piece without leaving residue.\u003c\/li\u003e\n\u003cli\u003eGroup small parts in Blueprint Studio on a single raft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning\u003c\/h3\u003e\n\u003cp\u003eAfter removing your parts, check there's no residue left on the surface or inside the holes. Clean with isopropyl alcohol and a lint-free cloth, and blow dry with air before mounting it. You'll find alcohol and supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex Steel Build Platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex, Reflex Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437942062\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt's not for the Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro, or for printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eDoes it fit the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears treats the Reflex and Reflex Turbo as the same family, and they share the print area spare parts.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex RS or Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eNo. Each family has its own platform.\u003c\/p\u003e\n\u003ch4\u003eWhat material is it made of?\u003c\/h4\u003e\n\u003cp\u003e304 stainless steel, with a perforated design.\u003c\/p\u003e\n\u003ch4\u003eWhat are the holes for?\u003c\/h4\u003e\n\u003cp\u003eThey let liquid resin drain back into the vat. That's why a raft of at least 10 x 10 mm is recommended.\u003c\/p\u003e\n\u003ch4\u003eDo I need to level it after replacing it?\u003c\/h4\u003e\n\u003cp\u003eYes, from the printer menu, following HeyGears' official leveling video.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The platform is the same with or without the module.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204345681,"sku":"DIST-6971437942062","price":161.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-plataforma-impresion-acero-reflex.jpg?v=1792509560"},{"product_id":"heygears-rascador-calefactado-reflex-2","title":"HeyGears Reflex 2 \/ 2 Pro - Heated Resin Scraper","description":"\u003ch2\u003eHeyGears Heated Scraper for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThe Reflex 2 series scraper is the part that moves across the vat, stirring the resin between layers. The heated version has a built-in heater and temperature sensor: it warms the resin while stirring it and keeps it at printing temperature throughout the entire job. The Reflex 2 Pro comes with it as standard; the Reflex 2 comes with the regular scraper, and this is its optional temperature-control upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster heating:\u003c\/strong\u003e from 10 °C to 22 °C in 6 minutes, 68 % faster according to HeyGears (tested with PAP10).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature control:\u003c\/strong\u003e ±1 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains the temperature\u003c\/strong\u003e throughout the entire print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrip time:\u003c\/strong\u003e 24 % less waiting with high-viscosity resins (HeyGears data with PAU20).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cp\u003eCold resin is thicker: it drains more poorly, struggles to flow under the build plate and causes more print failures. HeyGears recommends printing between 20 and 25 °C. If your workshop gets cold in winter, or you use thick engineering resins, the heated scraper brings the resin up to temperature without waiting for the room to warm up. Stirring also keeps the resin from settling and leaving residue in the vat.\u003c\/p\u003e\n\u003cp\u003eHeyGears data:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith PAP10, from 10 °C to 22 °C in 6 minutes.\u003c\/li\u003e\n\u003cli\u003eWith PAU20 at 50 µm layers, heating from 25 °C to 35 °C reduced drip waiting time by more than 24 % on models with a cross-section larger than 40 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2:\u003c\/strong\u003e optional upgrade. The printer comes with the regular scraper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 Pro:\u003c\/strong\u003e included as standard. This one serves as a replacement or spare part.\u003c\/li\u003e\n\u003cli\u003eFits the Reflex 2 series vat. The Reflex 2 Pro comes with it as standard and supports the Pulsing Release Module 2 kit, so it also works with the Pulsing Release vat.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex, Reflex Turbo or the Reflex RS family. On the RS, heating is handled by the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-rs\"\u003eheated vat\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt fits into the vat just like the regular scraper, after installing the vat and the build plate.\u003c\/li\u003e\n\u003cli\u003eBefore levelling the build plate, the scraper must be at the far right end of the vat. If it doesn't return on its own, move it there by hand.\u003c\/li\u003e\n\u003cli\u003eDo not disconnect it while it is moving or heating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning\u003c\/h3\u003e\n\u003cp\u003eHeyGears' procedure for the Reflex 2 series scraper:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a container of about 215 x 145 mm or slightly longer than the scraper.\u003c\/li\u003e\n\u003cli\u003eDip only the part that goes inside the vat into 95 % alcohol or IPA. The back of the scraper must not touch the liquid.\u003c\/li\u003e\n\u003cli\u003eHold it by the end and move it from side to side to clean it.\u003c\/li\u003e\n\u003cli\u003eDry the scraper's holes with compressed air and repeat if any resin remains.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlcohol and cleaning supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex 2 Series Heating Scraper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature accuracy\u003c\/td\u003e\n\u003ctd\u003e±1 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003e10 °C to 22 °C in 6 min (PAP10)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex 2, Reflex 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437944073\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex 2 and your workshop stays above 20 °C all year round, the regular scraper is all you need. If you work in a cold space or use thick resins such as PAU20, the heated one is the upgrade for you. With the Reflex 2 Pro, you only need it as a spare part.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt's not for the original Reflex, the Reflex Turbo, the RS or the RS Turbo, nor for printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Reflex 2 Pro already include it?\u003c\/h4\u003e\n\u003cp\u003eYes, the Reflex 2 Pro comes with a heated scraper. The Reflex 2 comes with the regular one.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take to heat the resin?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, from 10 °C to 22 °C in 6 minutes with PAP10.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is it?\u003c\/h4\u003e\n\u003cp\u003e±1 °C.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release vat?\u003c\/h4\u003e\n\u003cp\u003eIt fits the Reflex 2 series vat. HeyGears does not indicate any limitation with the Pulsing Release vat.\u003c\/p\u003e\n\u003ch4\u003eIs it compatible with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. On the RS, the resin is heated by the heated vat.\u003c\/p\u003e\n\u003ch4\u003eHow do I clean it?\u003c\/h4\u003e\n\u003cp\u003eOnly the part that goes in the vat, in 95 % alcohol or IPA, without wetting the back. Then blow compressed air through the holes.\u003c\/p\u003e\n\u003ch4\u003eCan I remove it with the printer switched on?\u003c\/h4\u003e\n\u003cp\u003eNot while it is moving or heating.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204542289,"sku":"DIST-6971437944073","price":93.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-rascador-calefactado-reflex-2.jpg?v=1792509564"},{"product_id":"resina-heygears-ultraprint-casting-pac10-calcinable-1kg","title":"HeyGears UltraPrint Casting PAC10 - Castable Wax Resin for Jewelry 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint Casting PAC10: wax-filled castable resin for jewellery (385 nm)\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Casting PAC10 is HeyGears' resin for printing lost-wax casting patterns. It contains 70 to 75 % wax, leaves no more than 0.02 % ash and burns out cleanly inside the flask. The pattern comes off the printer, goes onto the tree, gets invested and is cast in metal just like a wax pattern. HeyGears shows castings in silver, gold and copper. Violet colour, 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you buy: this is a 385 nm resin only for HeyGears UltraCraft Reflex printers and it requires the Pulsing Release Module.\u003c\/strong\u003e It does not work on 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...) or on the Reflex RS \/ RS Turbo. If you have a different printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/burnout-resins\"\u003ecastable resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWax content:\u003c\/strong\u003e 70-75 %.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsh after burnout:\u003c\/strong\u003e 0.01-0.02 % (thermogravimetric analysis, ASTM E1131).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine detail:\u003c\/strong\u003e 0.08 mm engraved and 0.12 mm embossed details. Minimum wall thickness of 0.12 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance:\u003c\/strong\u003e ±0.03 mm on parts up to 20 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurnout schedule published\u003c\/strong\u003e by HeyGears for gypsum-bonded investments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm only. Requires the Pulsing Release Module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears designed it for jewellery and small precision casting parts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight jewellery:\u003c\/strong\u003e rings, earrings and pendants, including openwork or lattice designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetailed parts:\u003c\/strong\u003e stud earrings, setting prongs, textures and engravings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy jewellery:\u003c\/strong\u003e bracelets and solid rings.\u003c\/li\u003e\n\u003cli\u003eSmall lost-wax industrial parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt offers a good balance of toughness and strength for a castable material. That matters for openwork and hollow patterns, which break when removing supports or building the tree if the wax is brittle.\u003c\/p\u003e\n\u003cp\u003eDo you work in dental prosthetics? Dental labs use the same lost-wax technique, but HeyGears does not list PAC10 as a certified dental material. For that, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/dental-resins\"\u003edental resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinters:\u003c\/strong\u003e UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Reflex RS \/ RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e For Reflex and Reflex Turbo, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module Kit Reflex\u003c\/a\u003e. For Reflex 2 and 2 Pro, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module Kit Reflex 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're looking for a printer, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e are compatible.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWax content\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e70-75 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAsh (TGA)\u003c\/td\u003e\n\u003ctd\u003eASTM E1131\u003c\/td\u003e\n\u003ctd\u003e0.01-0.02 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature at 5 % mass loss\u003c\/td\u003e\n\u003ctd\u003eASTM E1131\u003c\/td\u003e\n\u003ctd\u003e274 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e21 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e450 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e30 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e680 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e16 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e13 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e64 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e259 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data with a deviation of ±10 %.\u003c\/p\u003e\n\u003ch4\u003ePattern design rules\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall thickness of 0.12 mm. For 10 × 10 mm walls, HeyGears recommends 0.18-0.2 mm.\u003c\/li\u003e\n\u003cli\u003eMinimum through-hole of 0.3 mm at 2 mm depth.\u003c\/li\u003e\n\u003cli\u003e0.08 mm engraved and 0.12 mm embossed details (at 0.4 mm depth).\u003c\/li\u003e\n\u003cli\u003eMinimum clearance between moving parts: 0.25 mm.\u003c\/li\u003e\n\u003cli\u003eFor hollow parts, drain holes of 1 to 2 mm depending on size.\u003c\/li\u003e\n\u003cli\u003eTolerance: ±0.03 mm up to 20 mm, ±0.1 mm up to 50 mm and ±0.15 mm up to 100 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003ch4\u003ePrinting\u003c\/h4\u003e\n\u003cp\u003eShake the bottle well before use and stir the resin in the vat. If you won't be printing for 3 days, filter it and pour it back into the bottle. Don't leave it in the vat for more than 7 days, as it absorbs moisture. In jewellery, surface finish is everything: the first time, print with Blueprint's default supports and add plenty of supports on low points and islands.\u003c\/p\u003e\n\u003ch4\u003eWashing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e95 % alcohol or IPA: 1-minute initial wash in used alcohol and a 2-minute rinse in clean alcohol.\u003c\/li\u003e\n\u003cli\u003eIn the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e at 160 rpm, or in an ultrasonic cleaner with the same times.\u003c\/li\u003e\n\u003cli\u003eDry with compressed air or for 10 minutes at 50 °C. Don't exceed 10 minutes in alcohol in total.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePost-curing\u003c\/h4\u003e\n\u003cp\u003eQuick cure, no heat, in air: \u003cstrong\u003e20 minutes at room temperature\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eFinishing before investing\u003c\/h4\u003e\n\u003cp\u003eRemove the supports by hand or with pliers and tweezers. Sand with 300-400 grit, then 600 and 1,000. On thin walls, start at 500-600. Remove the dust with water and wipe with a microfibre cloth and IPA. Your pattern is then ready to mount on the tree.\u003c\/p\u003e\n\n\u003ch3\u003eInvestment and burnout schedule\u003c\/h3\u003e\n\u003cp\u003eHeyGears has tested PAC10 with gypsum-bonded jewellery investments such as Certus Optima and Yihui Castino No.99 and YHR7097. Use the investment manufacturer's mixing ratio. The usual ratio is 38-40 parts water to 100 parts powder.\u003c\/p\u003e\n\u003cp\u003eStandard burnout schedule published by HeyGears for gypsum-bonded investments:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eStage\u003c\/th\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003cth\u003eTime\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlace the flasks in the kiln\u003c\/td\u003e\n\u003ctd\u003eRoom temperature (up to 150 °C)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp\u003c\/td\u003e\n\u003ctd\u003e1.5 °C\/min to 180 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold (dewaxing)\u003c\/td\u003e\n\u003ctd\u003e180 °C\u003c\/td\u003e\n\u003ctd\u003e60 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp\u003c\/td\u003e\n\u003ctd\u003e1.5 °C\/min to 350 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold\u003c\/td\u003e\n\u003ctd\u003e350 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp\u003c\/td\u003e\n\u003ctd\u003e3.6 °C\/min to 780 °C\u003c\/td\u003e\n\u003ctd\u003e120 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHold (burnout)\u003c\/td\u003e\n\u003ctd\u003e780 °C\u003c\/td\u003e\n\u003ctd\u003e180 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCool down\u003c\/td\u003e\n\u003ctd\u003e-2.5 °C\/min to casting temperature\u003c\/td\u003e\n\u003ctd\u003e60 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasting window\u003c\/td\u003e\n\u003ctd\u003eMetal casting temperature\u003c\/td\u003e\n\u003ctd\u003eApprox. 60 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDuring the 180 °C hold, the sprue melts and the wax flows out of the pattern, letting air in. During the 780 °C hold, the remaining resin is eliminated from the investment. The flask then cools down to the casting temperature of your chosen metal. HeyGears warns against overheating the flasks when placing them in the kiln, to prevent cracking. For other investments or processes, get in touch with us.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and these hazard statements: H315 (causes skin irritation), H317 (may cause an allergic skin reaction) and H319 (causes serious eye irritation).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses and ensure good ventilation. Avoid contact with liquid resin and with parts that are not fully cured.\u003c\/li\u003e\n\u003cli\u003eFlash point: above 250 °C, according to the safety data sheet. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore between 15 and 28 °C, away from sunlight and moisture. Shelf life of 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it and dispose of it in accordance with local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm printer from another brand, or a Reflex RS \/ RS Turbo.\u003c\/li\u003e\n\u003cli\u003eAnyone without the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003eEnd-use parts: it's a material designed to burn out inside the investment, not to be used as is.\u003c\/li\u003e\n\u003cli\u003eDental crowns or frameworks that require a certified material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAC10 on a 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin only for the UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro. It's also not validated on the Reflex RS.\u003c\/p\u003e\n\u003ch4\u003eIs the Pulsing Release Module required?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears states that PAC10 requires the Pulsing Release Module on all compatible printers.\u003c\/p\u003e\n\u003ch4\u003eHow much ash does it leave?\u003c\/h4\u003e\n\u003cp\u003eBetween 0.01 and 0.02 %, according to HeyGears' thermogravimetric analysis. With a correct burnout schedule, the flask is left clean.\u003c\/p\u003e\n\u003ch4\u003eWhich metals can it be cast in?\u003c\/h4\u003e\n\u003cp\u003eHeyGears presents it for jewellery and precious metals, and shows castings in silver, gold and copper.\u003c\/p\u003e\n\u003ch4\u003eWhich investment should I use?\u003c\/h4\u003e\n\u003cp\u003eGypsum-bonded jewellery investments. HeyGears has tested it with Certus Optima and with Yihui Castino No.99 and YHR7097.\u003c\/p\u003e\n\u003ch4\u003eHow is it post-cured before investing?\u003c\/h4\u003e\n\u003cp\u003e20 minutes of quick curing, without heat, in the UltraCraft Cure. Then sand if needed and remove the dust before mounting it on the tree.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for dental prosthetics?\u003c\/h4\u003e\n\u003cp\u003eHeyGears does not list it as a dental material. For dental use, we recommend dedicated materials.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205328721,"sku":"DIST-6971437941621","price":294.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-calcinable-heygears-pac10-joyeria-1kg.jpg?v=1792509583"},{"product_id":"resina-heygears-ultraprint-pae10-elastica-1kg","title":"HeyGears UltraPrint PAE10 - Silicone-Like Elastic Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAE10: 385 nm silicone-like elastic resin (49 Shore A)\u003c\/h2\u003e\n\u003cp\u003ePAE10 is the elastic resin in HeyGears' Tooling line. It prints soft parts with a silicone-like feel: 49 Shore A hardness and 433 % elongation at break. It stretches, bends and returns to its shape. HeyGears recommends it for prototyping parts that would be made of silicone in production: model accessories, industrial components and anatomical models. 1 kg bottle, translucent colour.\u003c\/p\u003e\n\u003cp\u003eTwo things to know before you order, so there are no surprises:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt's a \u003cstrong\u003e385 nm\u003c\/strong\u003e resin for HeyGears Reflex printers. \u003cstrong\u003eIt does not work on generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt requires the Pulsing Release Module (PRM).\u003c\/strong\u003e Without the PRM installed, HeyGears does not support it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm. Only for Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with Reflex RS or RS Turbo.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 49 Shore A, soft, silicone-like.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at break:\u003c\/strong\u003e 433 %.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy return:\u003c\/strong\u003e 83 %, according to HeyGears. It bounces back and recovers its shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to wash\u003c\/strong\u003e during post-processing, according to the manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle, translucent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003ePrototyping a silicone part usually means making a mould and casting. With PAE10 you print it directly and check shape, feel and fit before ordering the production mould. That's exactly what HeyGears designed it for: prototyping silicone parts.\u003c\/p\u003e\n\u003cp\u003eApplications suggested by the manufacturer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel accessories:\u003c\/strong\u003e tyres, covers, soft parts for figures and scale models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial components:\u003c\/strong\u003e prototypes of seals, bellows, bumpers and grip parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnatomical models:\u003c\/strong\u003e organs and tissues for training or patient education, like the heart HeyGears shows in its photos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis resin is for users who already own a Reflex with the PRM and want to add a soft material to their production. It's not a resin to start with.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eThis is the important part of the page. According to HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible printers:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro. All of them work at 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo, or any printer from another brand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRM required:\u003c\/strong\u003e PAE10 is on the list of resins that must be used with the Pulsing Release Module, together with PAC10, PAU20 and PAH270.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat you need depending on your printer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex or Reflex Turbo:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e, which includes the module and its tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 or Reflex 2 Pro:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e, or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003emodule without tank\u003c\/a\u003e plus the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 Pulsing Release tank\u003c\/a\u003e. The module alone does not work without that tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA design note: HeyGears does not recommend the PRM for models with walls of 3 mm or less. Since PAE10 is always used with the PRM, design with walls thicker than 3 mm.\u003c\/p\u003e\n\u003cp\u003ePrinters: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. Average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003ctd\u003e433 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003ctd\u003e1.4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eASTM D624\u003c\/td\u003e\n\u003ctd\u003e5.8 kN\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e49 Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e2,420 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat test\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e translucent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy return:\u003c\/strong\u003e 83 % (figure from the official HeyGears store).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 114 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eExposure and curing parameters are included in the HeyGears Blueprint process packages, not in the technical data sheet. With the PRM installed, you select PAE10 in Blueprint and the printer applies the profile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh viscosity:\u003c\/strong\u003e 2,420 mPa·s, much thicker than a standard resin. Shake the bottle well and work with the resin warm. On the Reflex 2, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e helps with thick resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e HeyGears highlights that it washes easily. Use the solvent specified in the process package. Accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e or a \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure\u003c\/a\u003e station. Follow the Blueprint times: an under-cured elastic part stays tacky and an over-cured one loses elasticity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e remove them carefully. With a soft material, it's best to cut them rather than pull them off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNitrile gloves, goggles and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat. Liquid resin must not go down the drain: cure it and dispose of it according to local regulations. Any anatomical models you print are for demonstration only: HeyGears does not present it as a medical material or for body contact.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAE10\u003c\/strong\u003e: soft, silicone-like parts that stretch and recover. Requires PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e: PVC-like flexible (75 Shore D). Harder; it gives but doesn't stretch like rubber. Doesn't need PRM and also works on the RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e: the other Tooling resin, rigid and polycarbonate-like, for tooling and load-bearing parts. Also with PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: rigid parts subject to friction, no PRM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore soft resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/flexible-3d-resins\"\u003eflexible resins\u003c\/a\u003e and technical ones in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone without the Pulsing Release Module. You can't print it without one.\u003c\/li\u003e\n\u003cli\u003eThe Reflex RS and RS Turbo: it is not validated on those machines.\u003c\/li\u003e\n\u003cli\u003e405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003eThin parts with walls under 3 mm.\u003c\/li\u003e\n\u003cli\u003eMedical devices or products in contact with skin or food: it has no certification for that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I print PAE10 without the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears includes it on the list of resins that must be used with the PRM. On the Reflex and Reflex Turbo you need the Reflex PRM kit; on the Reflex 2 and 2 Pro, the PRM 2 with its Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex RS or RS Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears only lists it as compatible with the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eWhat about an Elegoo, Anycubic or Phrozen?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin for the Reflex series with closed parameters in Blueprint. We don't sell it for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it the same as silicone?\u003c\/h4\u003e\n\u003cp\u003eIt has a similar feel and behaviour, with 49 Shore A and 433 % elongation, and HeyGears describes it as silicone-like. It's a photopolymer resin, not silicone: it's meant for prototyping silicone parts, not for replacing silicone in every application.\u003c\/p\u003e\n\u003ch4\u003eWhy are walls under 3 mm not recommended?\u003c\/h4\u003e\n\u003cp\u003eIt's a limitation of the Pulsing Release Module: HeyGears doesn't recommend it for models with walls of 3 mm or thinner. Since PAE10 is always printed with the PRM, the rule always applies.\u003c\/p\u003e\n\u003ch4\u003eIs it transparent?\u003c\/h4\u003e\n\u003cp\u003eIt's translucent, not transparent. It lets some light through, but you can't see clearly through it.\u003c\/p\u003e\n\u003ch4\u003eWhere can I find the curing times?\u003c\/h4\u003e\n\u003cp\u003eIn the PAE10 process package in HeyGears Blueprint. HeyGears doesn't publish them in the technical data sheet.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205459793,"sku":"DIST-6971437941751","price":128.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pae10-elastica-translucida-1kg.jpg?v=1792509586"},{"product_id":"resina-heygears-ultraprint-pau20-utillaje-1kg","title":"HeyGears UltraPrint PAU20 - Polycarbonate-Like Tooling Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAU20: 385 nm polycarbonate-like tooling resin\u003c\/h2\u003e\n\u003cp\u003ePAU20 is the general-purpose resin in HeyGears' Tooling line. It's black, rigid and load-bearing: 69 MPa tensile strength and 109 MPa flexural strength. HeyGears compares it to polycarbonate and recommends it for structural parts, tooling and end-use jigs. It prints with ±0.04 mm tolerances and a smooth surface finish. 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003eTwo important notes before you order:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a \u003cstrong\u003e385 nm\u003c\/strong\u003e resin for the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro only. \u003cstrong\u003eIt does not work on generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...) or on the Reflex RS or RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe Pulsing Release Module (PRM) is mandatory.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm. Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro only.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolycarbonate-like:\u003c\/strong\u003e high strength and toughness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 109 MPa. \u003cstrong\u003eTensile strength:\u003c\/strong\u003e 69 MPa.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork of fracture:\u003c\/strong\u003e 5,400 J\/m², with 23 % elongation at break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting tolerance:\u003c\/strong\u003e ±0.04 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear-resistant\u003c\/strong\u003e with a smooth surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle, black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003ePrinted tooling has to stand up to daily use: clamping, holding, positioning, taking knocks and friction. A modelling resin will crack or deform. PAU20 is designed for exactly that, combining the rigidity of an engineering resin with enough toughness not to snap at the first load.\u003c\/p\u003e\n\u003cp\u003eApplications suggested by HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooling and jigs:\u003c\/strong\u003e assembly fixtures, positioning and drilling jigs, gauges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixings:\u003c\/strong\u003e brackets, flanges, clamps and holders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd-use structural components:\u003c\/strong\u003e mechanical parts that work under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt's a resin for workshops, engineering, maintenance and production teams that already work with a Reflex and the PRM and need parts that actually perform, not just look good.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible printers:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro. All of them work at 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo (405 nm), or printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRM required:\u003c\/strong\u003e PAU20 is on the list of resins that must be used with the Pulsing Release Module, along with PAC10, PAE10 and PAH270.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat you need depending on your printer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex or Reflex Turbo:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e, including the module and its tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 or Reflex 2 Pro:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e, or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003emodule without tank\u003c\/a\u003e plus the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003eReflex 2 Pulsing Release tank\u003c\/a\u003e. The module alone won't work without that tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBear in mind that HeyGears does not recommend the PRM for models with walls of 3 mm or less. Since PAU20 always runs with the PRM, design your tools with walls thicker than 3 mm.\u003c\/p\u003e\n\u003cp\u003ePrinters: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. Average laboratory values with a ±10 % deviation.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e35 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e23 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e5,400 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e2,290 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e2,300 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e69 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e109 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e84 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e3,400 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e200 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat test\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e HeyGears equates the 200 h of UV exposure to around 3 years indoors, with less than 30 % loss of properties, no noticeable colour change and a deviation of ±0.1 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 116 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eExposure and curing parameters are included in the HeyGears Blueprint process packages, not in the technical data sheet. With the PRM fitted, you select PAU20 in Blueprint and the Reflex applies the profile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick resin:\u003c\/strong\u003e 3,400 mPa·s, well above a standard resin. Shake it thoroughly and work with it warm. On the Reflex 2, HeyGears tested its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e with PAU20 at 50 μm: heating it from 25 to 35 °C cut dripping time by more than 24 % on parts with a cross-section over 40 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e with the solvent specified in the process package. As it's thick, pay extra attention to cavities and holes. Supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e the HeyGears \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e or a \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure\u003c\/a\u003e station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e take advantage of the ±0.04 mm tolerance for fits, but remember the PRM rule: walls thicker than 3 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse nitrile gloves, safety glasses and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat. Never pour liquid resin down the drain: cure it and dispose of it according to local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAU20\u003c\/strong\u003e: tooling and load-bearing structural parts. Requires PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: more impact-resistant (64 J\/m) with a 2H surface, but less rigid (34 MPa tensile). Doesn't need the PRM and also works on the RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, for functional parts without the PRM.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e: the high-temperature resin in the range, if the part will be exposed to heat (PAU20 tops out at 60 °C).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e: the other Tooling resin, soft and elastic, silicone-like.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore technical resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e and for heat in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/high-temp-resistant-3d-resins\"\u003ehigh-temperature resistant resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone without the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003eThe Reflex RS and RS Turbo, or printers from other brands.\u003c\/li\u003e\n\u003cli\u003eParts that operate above 60 °C.\u003c\/li\u003e\n\u003cli\u003eThin-walled parts (3 mm or less).\u003c\/li\u003e\n\u003cli\u003eMiniatures and detailed parts: that's what PAP10 is for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I print PAU20 without the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears includes it in the list of resins that must use the PRM. On the Reflex and Reflex Turbo, use the Reflex PRM kit; on the Reflex 2 and 2 Pro, the PRM 2 with its Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on the Reflex RS or RS Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears only lists it as compatible with the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro, all of which are 385 nm.\u003c\/p\u003e\n\u003ch4\u003eWhat about Elegoo, Anycubic or Phrozen printers?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin with locked parameters in HeyGears Blueprint. We don't sell it for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it real polycarbonate?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a photopolymer resin that HeyGears describes as polycarbonate-like because of its combination of strength and toughness. It doesn't have the heat resistance of polycarbonate: its heat deflection temperature is 60 °C.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is it?\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies a printing tolerance of ±0.04 mm.\u003c\/p\u003e\n\u003ch4\u003eWhy is it so thick?\u003c\/h4\u003e\n\u003cp\u003eIts viscosity is 3,400 mPa·s according to the TDS. Warming it helps: on the Reflex 2, the heated scraper reduces dripping time.\u003c\/p\u003e\n\u003ch4\u003eWhere can I find the exposure and curing times?\u003c\/h4\u003e\n\u003cp\u003eIn the PAU20 process package in HeyGears Blueprint. HeyGears doesn't publish them in the technical data sheet.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205558097,"sku":"DIST-6971437941775","price":116.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pau20-utillaje-negra-1kg.jpg?v=1792509589"},{"product_id":"resina-heygears-ultraprint-pah270-alta-temperatura-1kg","title":"HeyGears UltraPrint PAH270 - 270 °C High-Temperature Resin for Molds 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAH270: 270 °C resin for injection moulds and tooling (385 nm)\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Molding PAH270 is the most heat-resistant resin in the entire HeyGears Reflex range. Its heat deflection temperature reaches 270 °C (at 0.455 MPa) and its flexural modulus is 7,240 MPa, so a part printed with it barely deforms under high load and temperature. It is designed for short-run injection moulds, jigs and industrial fixtures. White colour, 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant: this is a 385 nm resin for HeyGears UltraCraft Reflex printers and it requires the Pulsing Release Module.\u003c\/strong\u003e It does not work with 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...). If you own one of those, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins-3d-405nm\"\u003e405 nm resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e270 °C HDT\u003c\/strong\u003e (518 °F) at 0.455 MPa, the highest in the Reflex catalogue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural modulus of 7,240 MPa\u003c\/strong\u003e: more than twice that of PAH10.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 Shore D hardness\u003c\/strong\u003e and good scratch resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mineral filler content:\u003c\/strong\u003e density of 1.38 to 1.70 g\/cm³. One kilo takes up less volume, which is why the bottle may look like it isn't full. This is normal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires the Pulsing Release Module\u003c\/strong\u003e on all compatible printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm, UltraCraft Reflex series only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears targets it at industrial applications where temperature is the deciding factor:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection moulds for short runs and design validation.\u003c\/li\u003e\n\u003cli\u003eParts close to the engine, such as turbo housings or exhaust heat shields.\u003c\/li\u003e\n\u003cli\u003eElectrical components that need to withstand heat, for example high-temperature sensor housings.\u003c\/li\u003e\n\u003cli\u003eJigs, fixtures and tooling that work under load and heat at the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find it alongside our other \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/high-temp-resistant-3d-resins\"\u003ehigh-temperature resistant resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinters:\u003c\/strong\u003e UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Reflex RS \/ RS Turbo, according to HeyGears' compatibility chart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module required.\u003c\/strong\u003e You cannot print with this resin without it. For the Reflex and Reflex Turbo there is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module Kit Reflex\u003c\/a\u003e, and for the Reflex 2 series the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module Kit Reflex 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're looking for a printer, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e are compatible.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e7,240 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e101 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e65 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e13 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e4 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e94 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e1,265 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e200 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eData from HeyGears' laboratory, average values with a deviation of ±10 %. According to the manufacturer, 200 h of UV ageing is equivalent to about 3 years indoors.\u003c\/p\u003e\n\u003ch4\u003eUseful design data\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum wall: 0.12 mm with reinforcement and 0.2 mm without.\u003c\/li\u003e\n\u003cli\u003eMinimum hole and pin: 0.4 mm.\u003c\/li\u003e\n\u003cli\u003eMinimum clearance between parts: 0.25 mm.\u003c\/li\u003e\n\u003cli\u003eDimensional tolerance: ±0.10 mm up to 50 mm and ±0.15 mm up to 100 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003ch4\u003eBefore printing\u003c\/h4\u003e\n\u003cp\u003eThis resin settles easily. Shake the bottle thoroughly before use. If the resin has been in the vat for more than 24 hours, stir it thoroughly until there is no powder left at the bottom, both before printing and before pouring it back into the bottle. Also check the vat film before each job: if it is deformed, cloudy or worn, replace it.\u003c\/p\u003e\n\u003cp\u003ePAH270 sticks very strongly to the build plate. HeyGears suggests washing and baking the parts without removing them, and taking them off right after baking, before curing.\u003c\/p\u003e\n\u003ch4\u003eWashing\u003c\/h4\u003e\n\u003cp\u003eThis is where it differs from other resins. HeyGears recommends \u003cstrong\u003emanual cleaning with IPA and a brush\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove excess resin with a lint-free cloth.\u003c\/li\u003e\n\u003cli\u003eRinse for a few seconds in IPA, scrub with a brush and dry with the cloth. Repeat 2 or 3 times with clean IPA.\u003c\/li\u003e\n\u003cli\u003eBlow with compressed air until no residue remains.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTotal contact time with the solvent should not exceed 3 minutes. HeyGears does not recommend the UltraCraft Wash or an ultrasonic cleaner for this resin: a long wash degrades the properties and can crack the part. You'll find IPA in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e section.\u003c\/p\u003e\n\u003ch4\u003ePost-curing\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eBake at 80 °C for 60 minutes.\u003c\/li\u003e\n\u003cli\u003eCure at 60 °C for 60 minutes.\u003c\/li\u003e\n\u003cli\u003eOptional: bake at 120 °C for 180 minutes in an oven.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSteps 1 and 2 are done in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, sending the job from Blueprint. The third requires a separate oven.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and the following hazard statements: H302 (harmful if swallowed), H315 (causes skin irritation), H317 (may cause an allergic skin reaction), H319 (causes serious eye irritation), H335 (may cause respiratory irritation) and H373 (may cause damage to organs through prolonged or repeated exposure).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrile gloves, safety glasses and good ventilation. Wear a mask when sanding cured parts.\u003c\/li\u003e\n\u003cli\u003eFlash point: above 105 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore between 20 and 28 °C, away from light and tightly closed. Shelf life of 18 months.\u003c\/li\u003e\n\u003cli\u003eDo not pour liquid resin down the drain: cure it and dispose of it in accordance with local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich HeyGears resin should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAH270:\u003c\/strong\u003e when heat comes first (270 °C HDT) and you can accept a very stiff part with low impact resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e:\u003c\/strong\u003e if 95-110 °C is enough for you. It is easier to print, does not require the Pulsing Release Module and has higher impact resistance (30-35 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e:\u003c\/strong\u003e polycarbonate-like tooling that bends before it breaks, but only withstands 60 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm printer from another brand, or a Reflex RS.\u003c\/li\u003e\n\u003cli\u003eAnyone who doesn't have, and doesn't plan to buy, the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003eParts that take knocks or need to flex: with 4 % elongation and 13 J\/m impact strength, it is brittle.\u003c\/li\u003e\n\u003cli\u003eFigures or models: it is a technical material and there are more convenient resins for that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAH270 in a 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a 385 nm resin formulated for UltraCraft Reflex printers. It is not validated on the Reflex RS \/ RS Turbo either.\u003c\/p\u003e\n\u003ch4\u003eIs the Pulsing Release Module required?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears states that this resin requires the Pulsing Release Module on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eWhy does the bottle look half empty?\u003c\/h4\u003e\n\u003cp\u003eBecause it is a very dense resin (1.38 to 1.70 g\/cm³). One kilo takes up less volume than a standard resin. The weight is correct.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for injection moulds?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, that is its main application, together with jigs and fixtures. Its 270 °C HDT and stiffness make it suitable for short runs and validation.\u003c\/p\u003e\n\u003ch4\u003eCan I wash it in the UltraCraft Wash or an ultrasonic cleaner?\u003c\/h4\u003e\n\u003cp\u003eHeyGears does not recommend it. Wash manually with IPA and a brush, with a maximum of 3 minutes of total contact with the solvent.\u003c\/p\u003e\n\u003ch4\u003eHow is it post-cured?\u003c\/h4\u003e\n\u003cp\u003eBake at 80 °C for 60 min and cure at 60 °C for 60 min in the UltraCraft Cure. Optionally, 120 °C for 3 hours in an oven.\u003c\/p\u003e\n\u003ch4\u003eParts stick very firmly to the build plate. Is that normal?\u003c\/h4\u003e\n\u003cp\u003eYes, it is a characteristic of the material. Wash and bake with the part still on the plate and remove it as soon as baking is finished.\u003c\/p\u003e\n\u003ch4\u003eWhere is it shipped from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384205885777,"sku":"DIST-6971437943847","price":115.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg.jpg?v=1792509598"},{"product_id":"resina-heygears-ultraprint-pam10-color-1kg","title":"HeyGears UltraPrint PAM10 - CMYK Mixable Color Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAM10: mixable CMYK + white colour resin (385 nm)\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Design PAM10 is HeyGears' colour resin. It comes in five base colours, Cyan, Magenta, Yellow, Black and White, designed to be mixed together so you can get the exact shade you need. The best part is that the resin keeps its accuracy and printing behaviour whatever the mix. Mechanically, it is similar to ABS. Sold in 1 kg bottles per colour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is a 385 nm resin for HeyGears UltraCraft Reflex printers.\u003c\/strong\u003e It is not for 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...). If you have one of those, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins-3d-405nm\"\u003e405 nm resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive mixable colours:\u003c\/strong\u003e Cyan, Magenta, Yellow, Black and White (CMYK + W).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS-like properties:\u003c\/strong\u003e 45-47 MPa tensile strength and 20-25 % elongation at break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted part tolerance:\u003c\/strong\u003e ±0.05 mm, unaffected by colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-term stability:\u003c\/strong\u003e passes 600 h of UV exposure, damp heat, temperature change and colour fastness to perspiration tests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm, UltraCraft Reflex series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle. Choose the colour in the selector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow colour mixing works\u003c\/h3\u003e\n\u003cp\u003eJust like with printing ink: you start from the base colours and combine them by weight. HeyGears publishes a colouring guide with a practical example. For their colour number 17, the ratio is 20 g of Yellow to 0.6 g of Cyan. To prepare 300 g, scale it the same way: 300 g of Yellow and 9 g of Cyan.\u003c\/p\u003e\n\u003cp\u003eWhat you need to get it right:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA precision scale (HeyGears works to 0.01 g). A drop of resin weighs between 0.04 and 0.07 g, so the scale is what counts.\u003c\/li\u003e\n\u003cli\u003eMeasuring cups, droppers and a clean stirring stick for each colour.\u003c\/li\u003e\n\u003cli\u003eShake each bottle well before measuring out, as the pigment can settle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrepare a small sample first, cure it in a silicone mould and compare it with your reference under good lighting. The gloss of liquid resin is deceptive. Once you've found the shade, prepare the final quantity, mix while scraping the sides of the cup too, and let it rest covered and in the dark until the bubbles disappear.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAppearance prototypes in the final product colour, with no painting needed.\u003c\/li\u003e\n\u003cli\u003eConsumer electronics housings, such as headphone shells, that need long-term stability.\u003c\/li\u003e\n\u003cli\u003eDesign parts and creative projects with custom colours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're looking for a more technical resin, take a look at our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/abs-resins\"\u003eABS-like resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinters:\u003c\/strong\u003e UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Reflex RS \/ RS Turbo, according to HeyGears' compatibility table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you don't have a printer yet, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e are compatible.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eHeyGears publishes the values for the two ends of the range, Black and White.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003cth\u003eWhite\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e35 J\/m\u003c\/td\u003e\n\u003ctd\u003e50 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003ctd\u003e25 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e4,100 J\/m²\u003c\/td\u003e\n\u003ctd\u003e7,480 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1,600 MPa\u003c\/td\u003e\n\u003ctd\u003e1,490 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e45 MPa\u003c\/td\u003e\n\u003ctd\u003e47 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1,650 MPa\u003c\/td\u003e\n\u003ctd\u003e1,540 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e65 MPa\u003c\/td\u003e\n\u003ctd\u003e60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e59 °C\u003c\/td\u003e\n\u003ctd\u003e63 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e80 Shore D\u003c\/td\u003e\n\u003ctd\u003e82 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003ctd\u003e1.2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIt also passes damp heat (IEC 60068-2-78), temperature change (GB\/T 2423.22) and colour fastness to perspiration (ISO 105-E04) tests. Data from HeyGears' laboratory with a deviation of ±10 %.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle and stir in the vat. Once the mix is ready, wait until no bubbles remain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e IPA, 1 minute of initial washing and 1 minute of rinsing with clean alcohol, according to HeyGears' process table. You can do this in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e. You'll find IPA in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e 30 minutes, according to the same table. Ideally, use the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e with the Blueprint profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeftover resin:\u003c\/strong\u003e store the mix in an opaque, tightly sealed container and write down the recipe. That way you can reproduce the colour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and the following hazard statements: H315 (causes skin irritation), H317 (may cause an allergic skin reaction), H319 (causes serious eye irritation) and H335 (may cause respiratory irritation).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrile gloves, safety glasses and good ventilation, including while mixing colours.\u003c\/li\u003e\n\u003cli\u003eFlash point: 133 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry, ventilated place, protected from light and with the bottle tightly closed.\u003c\/li\u003e\n\u003cli\u003eDo not pour liquid resin down the drain: cure it and dispose of it in accordance with local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich HeyGears resin should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAM10:\u003c\/strong\u003e when colour matters and you want it straight off the printer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e:\u003c\/strong\u003e ABS-like in grey, with slightly higher strength (54 MPa tensile). Better if you're going to paint the part or colour doesn't matter to you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e:\u003c\/strong\u003e if you're after transparency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e:\u003c\/strong\u003e if the part has to withstand heat above 60 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm printer from another brand, or a Reflex RS.\u003c\/li\u003e\n\u003cli\u003eParts that will operate at high temperatures: its HDT is 59-63 °C.\u003c\/li\u003e\n\u003cli\u003eIf you don't want to weigh and mix, the most practical option is to use the base colours as they are or choose another resin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAM10 in a 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a 385 nm resin formulated for UltraCraft Reflex printers and their Blueprint profiles.\u003c\/p\u003e\n\u003ch4\u003eCan I print the colours without mixing?\u003c\/h4\u003e\n\u003cp\u003eYes. Each base colour is a complete resin. Mixing them is optional.\u003c\/p\u003e\n\u003ch4\u003eDoes accuracy or the profile change depending on the colour I mix?\u003c\/h4\u003e\n\u003cp\u003eAccording to HeyGears, no. The resin is designed to maintain dimensional accuracy and success rate with any combination.\u003c\/p\u003e\n\u003ch4\u003eHow do I get a specific colour?\u003c\/h4\u003e\n\u003cp\u003eBy mixing by weight with a precision scale. Try a small sample, cure it and compare it before preparing the large batch.\u003c\/p\u003e\n\u003ch4\u003eWhich colours do you have?\u003c\/h4\u003e\n\u003cp\u003eThe five base colours: Cyan, Magenta, Yellow, Black and White, in 1 kg bottles.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it is optional on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eDoes it withstand sunlight without yellowing?\u003c\/h4\u003e\n\u003cp\u003eIt passes 600 h of UV ageing (ASTM G154), which HeyGears equates to around 8 years indoors or 1 year outdoors with no noticeable colour change.\u003c\/p\u003e\n\u003ch4\u003eWhere is it shipped from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Yellow","offer_id":55384206213457,"sku":"DIST-6971437941508","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"Magenta","offer_id":55384206246225,"sku":"DIST-6971437941485","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"Cyan","offer_id":55384206278993,"sku":"DIST-6971437941461","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":55384206311761,"sku":"DIST-6971437941522","price":105.99,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":55384206344529,"sku":"DIST-6971437941546","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-color-heygears-ultraprint-pam10-cmyk.jpg?v=1792509607"},{"product_id":"resina-heygears-ultraprint-pat10-transparente-1kg","title":"HeyGears UltraPrint PAT10 - Clear Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAT10: 385 nm clear resin with an acrylic-like finish\u003c\/h2\u003e\n\u003cp\u003ePAT10 is HeyGears' clear resin. It transmits 88.5 % of light with just 5.4 % haze, so with a good finish it looks like acrylic. It's tough, won't crack even if it falls off the table, and is formulated not to yellow: HeyGears cites stable colour for 8 years indoors. It comes in a 1 kg bottle and is only for HeyGears Reflex 385 nm printers.\u003c\/p\u003e\n\u003cp\u003eUse it for clear parts on figures, scale modelling accessories, prototypes, electronics components and even end-use parts. According to HeyGears, it can also be used for wearable products that are in contact with the skin.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: this is a 385 nm resin for certain HeyGears printers only\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PAT10 is only validated on Reflex printers that use 385 nm UV light (385+ nm, according to HeyGears):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo (405 nm). HeyGears doesn't include them in its list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not a resin for standard 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen, Creality and similar). HeyGears doesn't provide profiles for them or validate it outside the 385 nm Reflex printers. If you're looking for a clear resin for another printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/transparent-3d-resins\"\u003eclear 3D resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparency:\u003c\/strong\u003e 88.5 % light transmission and 5.4 % haze (ASTM D1003)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-yellowing:\u003c\/strong\u003e passes 600 h of UV ageing, which HeyGears equates to 8 years indoors or 1 year outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery tough:\u003c\/strong\u003e 13200 J\/m² work of fracture and 25 % elongation at break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e heat deflection at 67 °C at 0.455 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm on parts up to 20 mm (±0.1 mm up to 50 mm and ±0.2 mm up to 100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin tests:\u003c\/strong\u003e passes cytotoxicity, sensitisation and skin irritation (ISO 10993-5, -10 and -23)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 0.9 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, clear. 385 nm only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears recommends it for four uses: clear parts for figures, consumer electronics prototypes, clear end-use parts and clear applications that must not yellow over time. Its website shows, for example, blocks with dragonflies inside that look like amber or acrylic.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone printing on a 385 nm Reflex who wants real transparency: housings that show what's inside, display pieces or wearable accessories. If toughness is what matters to you, it stands out there too: it has the highest work of fracture of the UltraPrint resins in this selection.\u003c\/p\u003e\n\n\u003ch3\u003eHeyGears printer compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e not compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. With it, you can print finer holes and pillars (0.3 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that compatibility and process packages are being updated; whatever appears in Blueprint Studio for your printer takes precedence. If you're looking for a compatible machine, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmission\u003c\/td\u003e\n\u003ctd\u003eASTM D1003\u003c\/td\u003e\n\u003ctd\u003e88.5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHaze\u003c\/td\u003e\n\u003ctd\u003eASTM D1003\u003c\/td\u003e\n\u003ctd\u003e5.4 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e31 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e25 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e13200 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1620 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1580 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e43 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e67 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e67 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e81 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e925 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated UV \/ thermal ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154 \/ -\u003c\/td\u003e\n\u003ctd\u003e600 h \/ 1600 h passed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCytotoxicity, sensitisation and skin irritation\u003c\/td\u003e\n\u003ctd\u003eISO 10993-5, -10, -23\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a ±10 % deviation, measured after curing in Performance mode in the UltraCraft Cure.\u003c\/p\u003e\n\u003ch4\u003eMinimum design features\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eStandard tank\u003c\/th\u003e\n\u003cth\u003ePulsing Release tank\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum gap\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wall\u003c\/td\u003e\n\u003ctd\u003e0.24 mm\u003c\/td\u003e\n\u003ctd\u003e0.22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum hole\u003c\/td\u003e\n\u003ctd\u003e0.5 mm\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pillar\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnsupported angle\u003c\/td\u003e\n\u003ctd\u003e25°\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the tank. Slice in Blueprint Studio, selecting PAT10. If you're not going to print within 3 days, filter the resin and return it to the bottle; don't leave it in the tank for more than 7 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e with 95 % alcohol. In the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e at 180 rpm, a 3-minute pre-wash with used alcohol and a 3-minute fine wash with clean alcohol; in an ultrasonic cleaner, 3 + 2 minutes. Don't exceed 10 minutes in alcohol in total. Dry with compressed air or in an oven at 40 °C for 10 minutes. You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e you have two options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast:\u003c\/strong\u003e no heat, in air, 7 minutes at room temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e with heat, in air: 15 minutes of preheating at 46 °C, 15 minutes of curing at 46 °C and 25 minutes of baking at 62 °C. This is the mode HeyGears uses to measure the data in the table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt's normal for the part to come out of curing slightly yellowish. HeyGears explains that the tint disappears within a week if you cure in Fast mode, or within 1-2 days in Performance mode. More equipment in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor a crystal-clear finish:\u003c\/strong\u003e wet sand from 400 to 1200 grit, going up in steps of 200 and not moving on to the next grit until you've removed the scratches from the previous one. Clean off the dust with water, then with IPA or 95 % alcohol and a microfibre cloth. Once the part is dry, apply a coat of clear acrylic varnish (car clear coat) or UV varnish. UV varnish gives a better finish, but some can make the part more brittle: test first. The more you sand, the clearer it gets.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAT10 carries the signal word \"Warning\": it causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317) and may cause respiratory irritation (H335).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and seek medical advice.\u003c\/li\u003e\n\u003cli\u003eFlash point: 130 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore sealed between 15 and 28 °C, away from sunlight and moisture. Shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe skin tests (ISO 10993) refer to the printed and cured part. This is not a dental or medical resin; for that, see our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/dental-resins\"\u003edental resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one to choose from the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, opaque grey, for functional parts. Also works on the Reflex RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e: translucent pink and water-washable, if you don't need true transparency.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: the standard matte modelling resin, for opaque figures and prototypes.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pam10-color-1kg\"\u003ePAM10\u003c\/a\u003e: HeyGears' mixable colour resins, if you want to tint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you have a Reflex RS or RS Turbo: it's not compatible.\u003c\/li\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you want maximum transparency without sanding or varnishing: the acrylic-like finish requires working the part.\u003c\/li\u003e\n\u003cli\u003eIf you're looking for a resin for dental or medical use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAT10 work on the Reflex RS or RS Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears only lists it as compatible with the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro, which are 385 nm printers.\u003c\/p\u003e\n\u003ch4\u003eWhat about an Elegoo, Anycubic or other 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin with no profiles or validation outside the compatible HeyGears Reflex printers.\u003c\/p\u003e\n\u003ch4\u003eDoes it come out clear straight from the printer?\u003c\/h4\u003e\n\u003cp\u003eTo achieve the acrylic-like finish, you need to sand up to 1200 grit and apply clear varnish. HeyGears sums it up like this: the more you sand, the clearer it gets.\u003c\/p\u003e\n\u003ch4\u003eWhy does it turn yellow after curing?\u003c\/h4\u003e\n\u003cp\u003eThat's normal. According to HeyGears, the tint disappears within a week with Fast curing, or within 1-2 days with Performance mode.\u003c\/p\u003e\n\u003ch4\u003eDoes it yellow over the years?\u003c\/h4\u003e\n\u003cp\u003eIt's formulated not to: it passes 600 hours of UV ageing, which HeyGears equates to 8 years indoors with no noticeable colour change.\u003c\/p\u003e\n\u003ch4\u003eCan it be used for parts that touch the skin?\u003c\/h4\u003e\n\u003cp\u003eHeyGears says yes for wearable products: the cured part passes ISO 10993 tests for cytotoxicity, sensitisation and skin irritation. It is not a resin for medical or dental use.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it's optional. With it, you can print holes and pillars down to 0.3 mm.\u003c\/p\u003e\n\u003ch4\u003eWhat temperature can it withstand?\u003c\/h4\u003e\n\u003cp\u003eIts heat deflection temperature is 67 °C at 0.455 MPa.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384206508369,"sku":"DIST-6971437941447","price":104.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-transparente-heygears-ultraprint-pat10-1kg.jpg?v=1792509612"},{"product_id":"resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg","title":"HeyGears UltraPrint PAH10 - Rigid High-Temperature Resin for Moulds 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAH10: rigid high-temperature resin for moulds and tooling\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Molding PAH10 is HeyGears' resin for parts that have to withstand heat and load without deforming. It is very stiff (flexural modulus of up to 3,350 MPa), has a heat deflection temperature of 110 °C in the Clear Tan colour and is mainly used for silicone moulds, tooling and functional prototypes that run hot. We sell it in a 1 kg bottle and in two colours: Clear Tan and Black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeads up before you buy, because each colour works on different printers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan: 385 nm only.\u003c\/strong\u003e Only on HeyGears UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBlack: 385 nm and also HeyGears' 405 nm Reflex RS \/ RS Turbo.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeither is validated on 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...). The fact that Black works on the RS doesn't mean it works on any 405 nm printer: it relies on the HeyGears profiles in Blueprint. If you have a printer from another brand, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins-3d-405nm\"\u003e405 nm resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat deflection temperature (HDT at 0.455 MPa):\u003c\/strong\u003e 110 °C in Clear Tan and 95 °C in Black.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh stiffness:\u003c\/strong\u003e tensile modulus of 3,330 MPa (Clear Tan) and 3,150 MPa (Black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 140 MPa and 136 MPa respectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted part tolerance:\u003c\/strong\u003e ±0.05 mm according to HeyGears (measured with Black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e passes 600 h of UV (ASTM G154) and 1,600 h of accelerated thermal ageing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e Clear Tan 385 nm only (UltraCraft Reflex series). Black at 385 nm and on the 405 nm Reflex RS \/ RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTwo colours, two behaviours\u003c\/h3\u003e\n\u003cp\u003eThey're not the same material dyed a different colour. HeyGears provides different data for each:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan:\u003c\/strong\u003e the one with the highest heat resistance (HDT 110 °C) and slightly higher tensile strength. HeyGears recommends it for silicone moulds, prototypes and end-use parts with moderate thermal demands, such as intake or exhaust ducts on RC cars that run at around 100 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e designed for structures that bear continuous load. Its strong point is long-term resistance to deformation. It's used for structural parts, inserts, component housings and tooling for silicone moulding. It withstands slightly less heat (HDT 95 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMoulds and dies for casting silicone, where the mould has to hold its shape under heat.\u003c\/li\u003e\n\u003cli\u003eFunctional prototypes that need stiffness and creep resistance (so they don't \"give\" over time under load).\u003c\/li\u003e\n\u003cli\u003eParts near heat sources: ducts, motor mounts, housings.\u003c\/li\u003e\n\u003cli\u003eTooling, jigs and workshop fixtures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is an engineering resin. If you're looking for other heat-resistant options, take a look at our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/high-temp-resistant-3d-resins\"\u003ehigh-temperature resistant resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e collections.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears' compatibility table:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro (385 nm) and also Reflex RS \/ RS Turbo (405 nm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional for both colours. Works with the standard tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrint profiles are selected in HeyGears' Blueprint software. If you don't have a printer yet, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e work at 385 nm. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e is 405 nm and only supports the Black colour: if you have an RS, don't order Clear Tan.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eClear Tan\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e110 °C\u003c\/td\u003e\n\u003ctd\u003e95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e3,330 MPa\u003c\/td\u003e\n\u003ctd\u003e3,150 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e81 MPa\u003c\/td\u003e\n\u003ctd\u003e75 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e3,350 MPa\u003c\/td\u003e\n\u003ctd\u003e3,050 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e140 MPa\u003c\/td\u003e\n\u003ctd\u003e136 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e6 %\u003c\/td\u003e\n\u003ctd\u003e7 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e35 J\/m\u003c\/td\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3,550 J\/m²\u003c\/td\u003e\n\u003ctd\u003e3,050 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e87 Shore D\u003c\/td\u003e\n\u003ctd\u003e89 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.6 %\u003c\/td\u003e\n\u003ctd\u003e0.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e660 mPa·s\u003c\/td\u003e\n\u003ctd\u003e750 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average values with a deviation of ±10 %. According to the manufacturer, 600 h of UV is equivalent to around 8 years indoors or 1 year outdoors with less than 30 % loss of properties.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003ch4\u003eBefore printing\u003c\/h4\u003e\n\u003cp\u003eShake the bottle well and stir the resin in the tank before each print. If the resin is going to sit unused for more than 3 days, filter it and return it to the bottle. HeyGears recommends not leaving it in the tank for more than 7 days.\u003c\/p\u003e\n\u003ch4\u003eWashing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-stage wash with IPA or 95 % alcohol: a first pass with used alcohol and a second with clean alcohol.\u003c\/li\u003e\n\u003cli\u003eIn the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e (Black profile): 250 rpm, 2 min + 2 min. In an ultrasonic cleaner: 1 min + 2 min.\u003c\/li\u003e\n\u003cli\u003eDon't leave the part in alcohol for more than 10 minutes in total. Dry it with compressed air or for 10 minutes at 50 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find isopropyl alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003ePost-curing\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies heated post-curing: \u003cstrong\u003e60 °C for 60 minutes\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, Performance mode. The properties in the table were measured with this cure. If you cure with another machine without heat, don't expect to reach the same heat deflection temperature.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and the following hazard statements: H302 (harmful if swallowed), H315 (causes skin irritation), H317 (may cause an allergic skin reaction), H319 (causes serious eye irritation), H335 (may cause respiratory irritation) and H373 (may cause damage to organs through prolonged or repeated exposure).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear nitrile gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eFlash point: 123 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore between 15 and 28 °C, away from light and tightly closed. Shelf life of 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich HeyGears resin should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAH10:\u003c\/strong\u003e the balance between stiffness and temperature (95-110 °C). No mandatory Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e:\u003c\/strong\u003e if you need to withstand much more heat (HDT of 270 °C), for example for injection moulds. It's more brittle and requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e:\u003c\/strong\u003e polycarbonate-like tooling resin, with higher elongation (23 %) but only 60 °C HDT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e:\u003c\/strong\u003e ABS-like for housings and prototypes without thermal demands (HDT 63 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm LCD printer from another brand. It's not validated outside HeyGears printers.\u003c\/li\u003e\n\u003cli\u003eIf you have a Reflex RS or RS Turbo and want Clear Tan: only Black works on those printers.\u003c\/li\u003e\n\u003cli\u003eParts that need to bend or take impacts: with 6-7 % elongation it's rigid and brittle under impact.\u003c\/li\u003e\n\u003cli\u003eHigh-temperature plastic injection moulds: that's what PAH270 is for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAH10 work on a 405 nm printer like an Elegoo or an Anycubic?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. HeyGears only validates it on its own printers and with its Blueprint profiles. Clear Tan is only for the 385 nm Reflex printers. Black also works on the 405 nm Reflex RS \/ RS Turbo, but not on 405 nm printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between Clear Tan and Black?\u003c\/h4\u003e\n\u003cp\u003eClear Tan withstands higher temperatures (HDT 110 °C vs 95 °C) and is slightly stronger. Black is aimed at structures under continuous load and is the only one that's also compatible with the Reflex RS \/ RS Turbo.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. For PAH10 it's optional on all compatible printers.\u003c\/p\u003e\n\u003ch4\u003eCan it be used to make silicone moulds?\u003c\/h4\u003e\n\u003cp\u003eYes, it's one of its main uses. Its stiffness and heat resistance help keep the mould from deforming while the silicone is cast and cured.\u003c\/p\u003e\n\u003ch4\u003eHow is it post-cured?\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies 60 °C for 60 minutes with heat in the UltraCraft Cure (Performance mode). The published properties were measured this way.\u003c\/p\u003e\n\u003ch4\u003eIs it compatible with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eOnly the Black colour, according to the manufacturer's compatibility table. Clear Tan is validated on Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eHow long does an unopened bottle last?\u003c\/h4\u003e\n\u003cp\u003eShelf life is 18 months, stored between 15 and 28 °C and protected from light and moisture.\u003c\/p\u003e\n\u003ch4\u003eWhere is it shipped from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Black","offer_id":55384206770513,"sku":"DIST-6971437941935","price":104.99,"currency_code":"EUR","in_stock":true},{"title":"Light brown","offer_id":55384206803281,"sku":"DIST-6971437941560","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pah10-negro-1kg.jpg?v=1792509620"},{"product_id":"resina-heygears-ultraprint-pau11-tipo-abs-1kg","title":"HeyGears UltraPrint PAU11 - General Purpose ABS-Like Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAU11: ABS-like resin for functional parts\u003c\/h2\u003e\n\u003cp\u003ePAU11 is HeyGears' general-purpose resin with ABS-like properties. It handles impacts well, doesn't break easily and keeps its dimensions and colour over time. HeyGears recommends it for end-use parts and industrial applications: fasteners, assembly parts and enclosures. It's grey and comes in a 1 kg bottle for HeyGears Reflex printers.\u003c\/p\u003e\n\u003cp\u003eIt's the successor to PAU10. The clearest practical difference is compatibility: PAU10 only worked on the Reflex and Reflex Turbo, while PAU11 works across the entire Reflex series, including the Reflex 2 and Reflex RS.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has a pre-tuned print profile in Blueprint, the brand's software. PAU11 is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWorking on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar) and doesn't guarantee results on them. If you're looking for an ABS-like resin for another printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS-like:\u003c\/strong\u003e 42 J\/m notched impact strength and 21 % elongation at break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToughness:\u003c\/strong\u003e 6870 J\/m² work of fracture, more than double that of PAB10 or purple PAS10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e 54 MPa tensile and 86 MPa flexural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e heat deflection at 63 °C at 0.455 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm tolerance on the printed part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable over time:\u003c\/strong\u003e passes 600 h of UV ageing, which HeyGears equates to 8 years indoors or 1 year outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 0.9 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eThis is the UltraPrint resin for parts that have to work, not just look good: electronics enclosures, clips, brackets, covers, assembly parts, functional prototypes you'll assemble and disassemble, and printed fasteners. HeyGears describes it as a balance of good mechanical properties, dimensional accuracy and stable colour over long-term use.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone who owns a Reflex and wants to print useful parts, or for anyone making prototypes that have to pass fit and drop tests. It also works for figures and miniatures, but standard modelling resins give a better finish for less money there.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. It isn't required, but you can use it to reduce peel forces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that the compatibility table and process packages are being updated; whatever appears in Blueprint Studio for your printer takes precedence. If you're looking for a machine, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact strength\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e42 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e21 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e6870 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1900 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1980 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e54 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e86 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e63 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e81 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e426 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h passed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e1600 h passed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat, temperature change and colour fastness\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78, ISO 105-E04 and others\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a deviation of ±10 %. In the ageing tests, HeyGears considers a test passed if properties drop by less than 30 %, there is no noticeable colour change (ΔE \u0026lt; 2) and dimensional deviation stays within ±0.1 mm.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the vat before you start. Slice in Blueprint Studio by selecting PAU11; the profile comes pre-tuned for each Reflex printer. Don't leave the resin in the vat for many days: filter it and return it to the bottle if you won't be printing soon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigning functional parts:\u003c\/strong\u003e with a ±0.05 mm tolerance you can print snap fits and parts that assemble with others. If you're going to tap threads or make clips, give the walls some thickness: the 21 % elongation gives it room to bend before breaking, but it isn't a flexible resin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing and curing:\u003c\/strong\u003e HeyGears hasn't publicly released a washing and curing guide with times for PAU11. If you have the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, send jobs from Blueprint so they apply the brand's process. The mechanical data in the table are achieved with a full cure; a poorly cured part won't reach those figures. You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e and equipment in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAU11 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear chemical-resistant gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water for several minutes and consult a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: above 105 °C. Not considered dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore it tightly closed, in a ventilated place and away from heat and sunlight.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one to choose within the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e or PAB10: if you print figures and models for display or painting, the standard resins give a better matte finish and cost less.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: if the part needs to be transparent. It has an even higher work of fracture (13200 J\/m²), but it's for parts that let light through.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e: HeyGears' tooling resin, for jigs and workshop tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg\"\u003ePAH10\u003c\/a\u003e or \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e: if the part will operate at temperatures above PAU11's 63 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you're looking for a flexible or elastic resin: that's what \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e or \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e are for.\u003c\/li\u003e\n\u003cli\u003eIf the part will operate under heat: its heat deflection temperature is 63 °C.\u003c\/li\u003e\n\u003cli\u003eIf you only print miniatures for painting: a standard resin will give you the same result for less.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAU11 work with Elegoo, Anycubic or other 405 nm printers?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. It works on the Reflex RS, which is 405 nm, but with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between PAU11 and PAU10?\u003c\/h4\u003e\n\u003cp\u003ePAU10 is only compatible with the Reflex and Reflex Turbo. PAU11 works across the entire series: Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro, Reflex RS and Reflex RS Turbo.\u003c\/p\u003e\n\u003ch4\u003eIs it really like ABS?\u003c\/h4\u003e\n\u003cp\u003eHeyGears defines it as a resin with properties close to ABS: it handles impacts well (42 J\/m notched) and doesn't break easily. It's still a photopolymer resin; it isn't injection-moulded ABS or filament.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it's optional. PAU11 prints with the standard vat.\u003c\/p\u003e\n\u003ch4\u003eWhat temperature can it withstand?\u003c\/h4\u003e\n\u003cp\u003eIts heat deflection temperature is 63 °C at 0.455 MPa. Above that, the part may deform under load.\u003c\/p\u003e\n\u003ch4\u003eDoes it yellow over time?\u003c\/h4\u003e\n\u003cp\u003eIt has passed 600 hours of UV ageing and a colour fastness test. HeyGears equates this to 8 years indoors or 1 year outdoors with no noticeable colour change.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is it?\u003c\/h4\u003e\n\u003cp\u003eA tolerance of ±0.05 mm on the printed part, according to the technical data sheet.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384206967121,"sku":"DIST-6971437942932","price":64.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-tipo-abs-heygears-ultraprint-pau11-gris-1kg.jpg?v=1792509624"},{"product_id":"resina-heygears-ultraprint-parp10-prototipado-rapido-1kg","title":"HeyGears UltraPrint PARP10 Orange Clay - Rapid Prototyping Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PARP10 Orange Clay: rapid prototyping resin for fine detail\u003c\/h2\u003e\n\u003cp\u003ePARP10 Orange Clay is HeyGears' rapid prototyping resin in an orange clay colour. It has a matte finish that hides layer lines, good hardness and moderate toughness, with a work of fracture of 3350 J\/m² so fine details don't snap at the first touch. HeyGears recommends it for highly detailed models: figures, jewellery prototypes and moulds. It comes in a 1 kg bottle for HeyGears Reflex printers.\u003c\/p\u003e\n\u003cp\u003eHeyGears offers two PARP10 resins. This is the Orange Clay: compared with the pale purple version, it has slightly higher hardness (84 vs 81 Shore D) and toughness, and it also works on the Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PARP10 Orange Clay is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWorking on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar) and doesn't guarantee results on them. If you don't own a Reflex, this isn't the resin for you: check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins\"\u003e3D printer resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail:\u003c\/strong\u003e minimum printable detail of 0.1 mm, according to HeyGears\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface:\u003c\/strong\u003e matte, with layer lines concealed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm on parts up to 20 mm (±0.10 mm up to 50 mm and ±0.20 mm up to 100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToughness:\u003c\/strong\u003e 3350 J\/m² work of fracture and 34 J\/m notched impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 84 Shore D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e 55 MPa tensile and 80 MPa flexural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast curing:\u003c\/strong\u003e 5 minutes without heat in the UltraCraft Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, orange clay colour (Orange Clay)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears recommends it for military models, car models, scale modelling, jewellery moulds, anime and video game figures that need high fidelity, and appearance prototypes where the surface is what matters. It has also passed the usual ageing tests, so your part will hold up on display without degrading quickly.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone printing small, highly detailed figures, for modellers, and for jewellers who want to validate a ring or pendant design before casting. Note on that last point: HeyGears presents it as a prototyping and mould resin, not a castable resin. To cast the part directly in metal, the one to choose in the range is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ecastable PAC10\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. With it you get finer gaps (0.15 mm vs 0.2 mm) and longer overhangs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDon't confuse it with the pale purple PARP10 (Pale Purple): it's a different version with different data, and HeyGears lists it as compatible only with the Reflex, Reflex Turbo, RS and RS Turbo. HeyGears notes that compatibility and process packages are being updated; whatever appears in Blueprint Studio takes precedence. If you're looking for a machine, take a look at the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e34 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e15 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3350 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1750 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1830 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e55 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e80 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e52 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e84 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1.1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e320 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e200 h passed (approx. 3 years indoors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a deviation of ±10 %, measured after 5 minutes of dry curing in Performance mode on the UltraCraft Cure.\u003c\/p\u003e\n\u003ch4\u003eDesign minimums\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eStandard tank\u003c\/th\u003e\n\u003cth\u003ePulsing Release tank\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum gap\u003c\/td\u003e\n\u003ctd\u003e0.2 mm\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverhang\u003c\/td\u003e\n\u003ctd\u003e1.0 mm\u003c\/td\u003e\n\u003ctd\u003e1.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnsupported angle\u003c\/td\u003e\n\u003ctd\u003e25°\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wall\u003c\/td\u003e\n\u003ctd\u003e0.18 mm\u003c\/td\u003e\n\u003ctd\u003e0.2 mm (0.22 mm unreinforced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum hole\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pillar\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the tank so no pigment settles at the bottom. Slice in Blueprint Studio by selecting \"Modeling PARP10 Orange Clay\", with automatic supports. If you won't be printing within 3 days, filter the resin and return it to the bottle; don't leave it in the tank for more than 7 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e with 95 % alcohol or IPA. In the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e at 180 rpm, a 2-minute pre-wash with used alcohol and a 2-minute fine wash with clean alcohol. In an ultrasonic cleaner, the same 2 + 2 minutes. Don't leave the part in alcohol for more than 10 minutes in total, and air-dry it before curing. You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, without heat and in air, 5 minutes at room temperature. HeyGears recommends sending the job from Blueprint, which applies a more refined process than manual mode. More equipment in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports:\u003c\/strong\u003e on regular parts, remove them by hand with a twist. On parts with thin walls, it's better to use flush cutters or a craft knife so you don't tear off detail.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PARP10 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses throughout the process, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and consult a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: 106 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore it closed between 15 and 28 °C, away from sunlight and moisture. Factory shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one to choose in the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: the standard modelling resin, in white, pale purple or black, for everyday figures and prototypes.\u003c\/li\u003e\n\u003cli\u003ePAB10: grey, designed for sanding and painting miniatures, with higher impact strength (45 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e: HeyGears' high-detail resin for production.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e: if you want to cast the part directly in metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, for functional parts that take knocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you want to lost-wax cast the part: use a castable resin, such as PAC10 or those in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/burnout-resins\"\u003ecastable resins\u003c\/a\u003e collection.\u003c\/li\u003e\n\u003cli\u003eIf the part will be exposed to heat: its heat deflection temperature is 52 °C.\u003c\/li\u003e\n\u003cli\u003eIf you need functional parts that withstand impacts: PAU11 is a better choice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PARP10 Orange Clay on an Elegoo, Anycubic or other 405 nm LCD printer?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. Although it works on the Reflex RS, which is 405 nm, it does so with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhich HeyGears printers does it work on?\u003c\/h4\u003e\n\u003cp\u003eThe Reflex and Reflex Turbo, the Reflex 2 and Reflex 2 Pro (385 nm), and the Reflex RS and RS Turbo (405 nm).\u003c\/p\u003e\n\u003ch4\u003eIs it the same as the purple PARP10?\u003c\/h4\u003e\n\u003cp\u003eNo. PARP10 Orange Clay has its own data (84 Shore D, 3350 J\/m² work of fracture) and is also compatible with the Reflex 2 and Reflex 2 Pro, which the purple version isn't.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for jewellery casting?\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies it for jewellery prototypes and moulds, not for burnout. If you want to cast the part in metal, use the castable PAC10.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it's optional. With it you can print finer gaps and longer overhangs.\u003c\/p\u003e\n\u003ch4\u003eHow do I wash and cure it?\u003c\/h4\u003e\n\u003cp\u003eWith 95 % alcohol or IPA: a 2-minute pre-wash and a 2-minute fine wash. Then 5 minutes of curing without heat in the UltraCraft Cure.\u003c\/p\u003e\n\u003ch4\u003eWhat's the minimum detail it can achieve?\u003c\/h4\u003e\n\u003cp\u003eHeyGears quotes details down to 0.1 mm, with 0.4 mm pillars and holes from 0.3 mm.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384207229265,"sku":"DIST-6971437941645","price":67.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-parp10-orange-clay-1kg.jpg?v=1792509631"},{"product_id":"resina-heygears-ultraprint-paf10-flexible-1kg","title":"HeyGears UltraPrint PAF10 - PVC-Like Flexible Resin for Reflex 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAF10: PVC-like flexible resin for HeyGears Reflex, in volcanic grey and clear\u003c\/h2\u003e\n\u003cp\u003ePAF10 is HeyGears' flexible production resin. It behaves like PVC: it bends without breaking, survives drops and doesn't crack over time. It's designed mainly for figures and gaming miniatures that are meant to be played with, not just looked at, and in its clear version also for electronics parts and industrial prototypes. 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003eIt's an UltraPrint resin for HeyGears Reflex printers: \u003cstrong\u003e385 nm\u003c\/strong\u003e on the Reflex, Reflex Turbo, Reflex 2 and 2 Pro, and \u003cstrong\u003e405 nm\u003c\/strong\u003e on the Reflex RS and RS Turbo. \u003cstrong\u003eIt is not suitable for generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...). If you don't have a Reflex, don't order it.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro; 405 nm on the Reflex RS and RS Turbo. Only validated on HeyGears printers, not on 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC-like flexibility:\u003c\/strong\u003e 46 % elongation at break in volcanic grey and 34 % in clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery tough:\u003c\/strong\u003e work of fracture of 5.390 J\/m² (volcanic grey), resistant to repeated bending.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e 82 % light transmission and no yellowing during prolonged use and storage, according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail:\u003c\/strong\u003e minimum embossed detail of 0.08 mm and almost invisible layer lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 1 % (clear) and 1.6 % (volcanic grey).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not require the Pulsing Release Module.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1.000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eGaming miniatures get dropped, knocked about in the case and break at their thinnest parts: swords, wings, spears. With a rigid resin, that's one less piece. PAF10 is made to solve that problem. HeyGears markets it as a gaming miniature resin that survives drops, doesn't crack or chip and bends noticeably without breaking.\u003c\/p\u003e\n\u003cp\u003eEach colour has its own use:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolcanic grey:\u003c\/strong\u003e figures, miniatures and busts. Smooth surface with almost invisible layers, a good tone for seeing detail and for priming. It's the most flexible and most impact-resistant variant (52 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e parts that need to be seen through or let light pass. HeyGears recommends it for figures, consumer electronics parts and industrial prototypes. HeyGears also sells it in a bundle with UltraGlaze ClearG115 Gloss varnish for a glossier finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears, PAF10 is compatible with the Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro, using the HeyGears Blueprint process packages. HeyGears notes that compatibility is being updated and that Blueprint is the reference. It does not require the Pulsing Release Module (PRM).\u003c\/p\u003e\n\u003cp\u003eAbout the light source: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work at 385 nm; the Reflex RS and RS Turbo at 405 nm. HeyGears validates it on both families, always with its own profiles. That doesn't make it a resin for any 405 nm printer.\u003c\/p\u003e\n\u003cp\u003eIf you use the PRM on a Reflex RS or RS Turbo, PAF10 is on the kit's list of compatible resins. Printers in our shop: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e. More in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), version 2.0 of 02.2026. Average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eVolcanic grey\u003c\/th\u003e\n\u003cth\u003eClear\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e52 J\/m\u003c\/td\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e46 %\u003c\/td\u003e\n\u003ctd\u003e34 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e5.390 J\/m²\u003c\/td\u003e\n\u003ctd\u003e4.780 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e930 MPa\u003c\/td\u003e\n\u003ctd\u003e1.200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e28 MPa\u003c\/td\u003e\n\u003ctd\u003e32 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e39 MPa\u003c\/td\u003e\n\u003ctd\u003e40 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e38 °C\u003c\/td\u003e\n\u003ctd\u003e40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e75 Shore D\u003c\/td\u003e\n\u003ctd\u003e75 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1.6 %\u003c\/td\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e550 mPa·s\u003c\/td\u003e\n\u003ctd\u003e700 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmission\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e82 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2\/2 Pro) and 405 nm (Reflex RS\/RS Turbo), always with HeyGears profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 124 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamp heat test:\u003c\/strong\u003e IEC 60068-2-78, listed as passed in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word of caution about \"flexible\": at 75 Shore D it isn't rubber. It's a tough plastic that gives and springs back, like rigid PVC, not a soft material. If you're looking for a silicone-like feel, check out PAE10.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eHeyGears does not publish exposure or curing times in the TDS. The parameters are included in the HeyGears Blueprint process packages and the Reflex applies them automatically.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle. The clear version is slightly more viscous (700 mPa·s).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e use the solvent specified in the process package. The \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e is the washing station for the Reflex platform. For manual washing, see \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e the HeyGears \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e or any \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure\u003c\/a\u003e station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e to get it as clear as possible, ClearG115 Gloss varnish is the option recommended by the manufacturer itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNitrile gloves, safety glasses and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat. Don't pour liquid resin down the drain: cure it and dispose of it according to local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAF10\u003c\/strong\u003e: figures that get dropped and bent, and tough clear parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e: finer detail and more rigidity, for display miniatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: rigid parts subject to friction, with a scratch-resistant 2H surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e: genuine silicone-like feel (49 Shore A, 433 % elongation). Requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: rigid clear modelling resin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/flexible-3d-resins\"\u003eflexible resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/transparent-3d-resins\"\u003eclear resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003eSoft rubber-like or gasket parts: it's a tough PVC-like material, not an elastomer.\u003c\/li\u003e\n\u003cli\u003eParts left in the sun in a car or near heat: heat deflection at 38-40 °C.\u003c\/li\u003e\n\u003cli\u003eRigid precision parts that must not give: there are more rigid resins in the range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAF10 work on Elegoo, Anycubic or Phrozen printers?\u003c\/h4\u003e\n\u003cp\u003eWe don't sell it for that. It's a resin for the HeyGears Reflex series (385 nm, and 405 nm on the RS and RS Turbo), with parameters in HeyGears Blueprint. There are no official profiles for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it a 385 nm or a 405 nm resin?\u003c\/h4\u003e\n\u003cp\u003eBoth, but only within the HeyGears range. The Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro cure it at 385 nm; the Reflex RS and RS Turbo at 405 nm. In both cases with HeyGears Blueprint profiles. The fact that it works on an RS at 405 nm doesn't mean it works on any 405 nm printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it require the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. It works with the standard vat. If you have the PRM on a Reflex RS or RS Turbo, it's also on the compatibility list.\u003c\/p\u003e\n\u003ch4\u003eIs it soft like rubber?\u003c\/h4\u003e\n\u003cp\u003eNo. It's 75 Shore D. It bends and springs back without breaking, like PVC, but it's a plastic. For a silicone-like feel, there's PAE10.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between volcanic grey and clear?\u003c\/h4\u003e\n\u003cp\u003eVolcanic grey is more flexible (46 % elongation) and more impact-resistant (52 J\/m). Clear lets through 82 % of light, absorbs less water (1 %) and is slightly more rigid.\u003c\/p\u003e\n\u003ch4\u003eDoes the clear version yellow?\u003c\/h4\u003e\n\u003cp\u003eHeyGears markets it as a resin that doesn't yellow during prolonged use or storage.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for gaming miniatures?\u003c\/h4\u003e\n\u003cp\u003eThat's its main use. HeyGears presents it for miniatures that survive drops, resist cracking and chipping, and have a smooth surface with almost invisible layers.\u003c\/p\u003e\n\u003ch4\u003eWhat is the ClearG115 bundle?\u003c\/h4\u003e\n\u003cp\u003eHeyGears offers clear PAF10 together with its UltraGlaze ClearG115 Gloss varnish to add gloss and transparency to your part. Here you can get it separately.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Transparent","offer_id":55384207688017,"sku":"DIST-6971437944080","price":55.48,"currency_code":"EUR","in_stock":true},{"title":"Volcanic grey","offer_id":55384207720785,"sku":"DIST-6971437941928","price":48.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-paf10-gris-volcanico-1kg.jpg?v=1792509643"},{"product_id":"resina-heygears-ultraprint-pap10-alto-detalle-1kg","title":"HeyGears UltraPrint PAP10 - High-Detail Resin for Reflex 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAP10: high-detail resin for miniatures and fine parts\u003c\/h2\u003e\n\u003cp\u003ePAP10 is HeyGears' resin for when detail comes first: miniatures, small-scale replicas and parts with very fine structures. It comes in a 1 kg bottle and in two colours, ash grey and black. It's part of the UltraPrint range, designed for HeyGears Reflex printers: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work with \u003cstrong\u003e385 nm\u003c\/strong\u003e light, and the Reflex RS and RS Turbo with \u003cstrong\u003e405 nm\u003c\/strong\u003e. HeyGears validates it on all of them with its own profiles.\u003c\/p\u003e\n\u003cp\u003eFirst, the important part: \u003cstrong\u003ethis is not a resin for generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen and similar). HeyGears formulates and validates it for its Reflex platform, with locked parameters in its software. If you don't own a Reflex, this resin isn't for you.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm on Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro; 405 nm on Reflex RS and RS Turbo. Only validated on HeyGears printers, not on 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine detail:\u003c\/strong\u003e minimum pillar of 0.1 mm in black and 0.15 mm in ash grey; minimum embossed detail of 0.06 mm (black figure).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStability:\u003c\/strong\u003e dimensional deviation within ±0.05 mm according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e 600 h of UV ageing (ASTM G154), which HeyGears equates to about 8 years of indoor use, with less than 30 % loss of properties and no noticeable colour change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 83 Shore D (ash grey) and 78 Shore D (black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 93-94 MPa.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not require the Pulsing Release Module.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears presents it as a high-precision application resin: end-use miniatures, small replicas and intricate parts. It's the one to put in the machine for wargaming and RPG figures, busts, small dioramas and any part with sharp edges, fine textures or thin elements such as spears, ropes or filigree.\u003c\/p\u003e\n\u003cp\u003eThe two colours have different uses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsh grey:\u003c\/strong\u003e the go-to colour for painting. Detail is easy to see and primer adheres well to a neutral tone. It's the one HeyGears recommends for painting and finishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e edges and textures stand out more to the naked eye, and it reaches the finest pillar (0.1 mm). Useful for parts that will stay unpainted or for presenting prototypes in black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBeyond miniatures, its dimensional stability and ageing resistance make it suitable for short runs of small parts that need to come out identical: HeyGears talks about small-batch production with consistent results.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003ePAP10 works on HeyGears Reflex series printers, with the HeyGears Blueprint process packages. It does not require the Pulsing Release Module (PRM).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsh grey:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e the official HeyGears store lists it for Reflex, Reflex Turbo, Reflex RS and Reflex RS Turbo. HeyGears' materials website also includes it for the Reflex 2 and 2 Pro, but warns that compatibility is being updated. If you have a Reflex 2, check that the black process package appears in Blueprint before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbout wavelength: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work at 385 nm; the Reflex RS and RS Turbo at 405 nm. HeyGears validates PAP10 on both families, always with its own profiles. That doesn't make it a resin for any 405 nm printer: outside the Reflex series there is no official profile and no guaranteed result.\u003c\/p\u003e\n\u003cp\u003eIf you use the Pulsing Release Module on a Reflex RS or RS Turbo, PAP10 is on the list of resins compatible with the RS PRM kit. Printers: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e. All other resin printers are in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. These are average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eAsh grey\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e36 J\/m\u003c\/td\u003e\n\u003ctd\u003e31 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e12 %\u003c\/td\u003e\n\u003ctd\u003e12 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3,050 J\/m²\u003c\/td\u003e\n\u003ctd\u003e2,370 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1,750 MPa\u003c\/td\u003e\n\u003ctd\u003e1,750 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1,920 MPa\u003c\/td\u003e\n\u003ctd\u003e2,490 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e54 MPa\u003c\/td\u003e\n\u003ctd\u003e55 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e93 MPa\u003c\/td\u003e\n\u003ctd\u003e94 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e58 °C\u003c\/td\u003e\n\u003ctd\u003e58 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e83 Shore D\u003c\/td\u003e\n\u003ctd\u003e78 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e385 mPa·s\u003c\/td\u003e\n\u003ctd\u003e500 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2\/2 Pro) and 405 nm (Reflex RS\/RS Turbo), always with HeyGears profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 101 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamp heat test:\u003c\/strong\u003e IEC 60068-2-78 passed according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eHeyGears doesn't publish exposure or post-curing times in the technical data sheet: the parameters are in the HeyGears Blueprint process packages, which you select when preparing the job. That's how the whole UltraPrint range works: you don't have to calibrate the resin yourself.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well. The resin performs better when warm; HeyGears actually uses PAP10 to benchmark the heated scraper on the Reflex 2, which brings it from 10 to 22 °C in 6 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e remove uncured resin with the solvent specified in the process package. With the Reflex range, the most convenient option is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e; if you wash by hand, you'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e HeyGears offers its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, with dual-wavelength curing and heat, designed for the Reflex platform. Other stations are in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePainting:\u003c\/strong\u003e with ash grey, prime directly after curing and give the support marks a light sanding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies PAP10 with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWork with nitrile gloves, safety glasses and good ventilation. If resin gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat and out of reach of children. Don't pour liquid resin down the drain: cure it in sunlight or with UV and dispose of it as solid waste in accordance with local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAP10\u003c\/strong\u003e: maximum detail and stability for miniatures and small parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: standard modelling resin, for everyday printing and prototypes that don't demand as much detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: if the part will be handled a lot (board games, articulated figures, gears), thanks to its 2H surface hardness and higher impact strength (64 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e: PVC-like miniatures that need to survive drops and bending.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: if you're after ABS-like behaviour for functional parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find all our resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/resins\"\u003e3D printer resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm LCD printer from another brand. There's no official profile and we don't recommend it.\u003c\/li\u003e\n\u003cli\u003eParts that need to bend or snap-fit: with 12 % elongation, it's a rigid resin.\u003c\/li\u003e\n\u003cli\u003eParts exposed to heat: its heat deflection temperature is 58 °C.\u003c\/li\u003e\n\u003cli\u003eLarge, solid parts where detail doesn't matter: there are cheaper resins for that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAP10 work on my Elegoo, Anycubic or Phrozen printer?\u003c\/h4\u003e\n\u003cp\u003eWe don't sell it for that. PAP10 is formulated for HeyGears Reflex printers (385 nm, and 405 nm on the RS and RS Turbo) and is printed with the HeyGears Blueprint process packages. There are no official parameters for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it a 385 nm or a 405 nm resin?\u003c\/h4\u003e\n\u003cp\u003eBoth, but only within the HeyGears range. The Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro cure it at 385 nm; the Reflex RS and RS Turbo at 405 nm. In both cases with HeyGears Blueprint profiles. The fact that it works on an RS at 405 nm doesn't mean it works on any 405 nm printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. It prints with the standard vat. If you already have the PRM on a Reflex RS or RS Turbo, PAP10 is among the resins compatible with that kit.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between ash grey and black?\u003c\/h4\u003e\n\u003cp\u003eAsh grey is easier to paint, slightly harder (83 vs 78 Shore D) and tougher on impact. Black defines edges more sharply and reaches 0.1 mm pillars, versus 0.15 mm for grey.\u003c\/p\u003e\n\u003ch4\u003eDoes the black work on the Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eHeyGears' materials website lists it as compatible, but the official store only lists it for Reflex, Reflex Turbo, RS and RS Turbo, and HeyGears warns that it's updating compatibility. Check in Blueprint whether you have the black process package before ordering. Ash grey is listed as compatible with the Reflex 2 in every source.\u003c\/p\u003e\n\u003ch4\u003eHow long does a part printed in PAP10 last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears has subjected it to 600 h of UV ageing, which it equates to about 8 years indoors or 1 year outdoors, with less than 30 % loss of properties, no noticeable colour change and a dimensional deviation of ±0.1 mm.\u003c\/p\u003e\n\u003ch4\u003eWhere are the exposure and curing times?\u003c\/h4\u003e\n\u003cp\u003eIn the HeyGears Blueprint process packages. HeyGears doesn't publish them in the technical data sheet because the printer and software apply them directly.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for functional parts?\u003c\/h4\u003e\n\u003cp\u003eFor small, rigid parts, yes: 54-55 MPa tensile and 93-94 MPa flexural strength. For parts that will take knocks or friction, PAWR10 is a better choice.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Ash grey","offer_id":55384207884625,"sku":"DIST-6971437941584","price":57.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":55384207917393,"sku":"DIST-6971437942185","price":57.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pap10-gris-ceniza-1kg.jpg?v=1792509648"},{"product_id":"resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg","title":"HeyGears UltraPrint PAWR10 - Wear-Resistant Resin for Reflex 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAWR10: wear-resistant resin for parts that get handled\u003c\/h2\u003e\n\u003cp\u003ePAWR10 is HeyGears' resin for parts that will pass through many hands: board game tokens and figures, articulated models, BJD dolls, electronics accessories, gears and outdoor gear. Its strong point is the surface: 2H pencil hardness, which HeyGears compares to car paint, and a smooth finish straight off the printer. 1 kg bottle, in cream and cream yellow.\u003c\/p\u003e\n\u003cp\u003eIt is an UltraPrint resin for HeyGears Reflex printers: \u003cstrong\u003e385 nm\u003c\/strong\u003e on the Reflex, Reflex Turbo, Reflex 2 and 2 Pro, and \u003cstrong\u003e405 nm\u003c\/strong\u003e on the Reflex RS and RS Turbo. \u003cstrong\u003eIt is not for generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...). Without a Reflex, there's no point in buying it.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro; 405 nm on the Reflex RS and RS Turbo. Only validated on HeyGears printers, not on 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2H surface hardness\u003c\/strong\u003e (GB\/T 6739 pencil test): scratch-resistant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNotched impact:\u003c\/strong\u003e 64 J\/m, almost double that of PAP10 (31-36 J\/m) or PAU20 (35 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth surface:\u003c\/strong\u003e HeyGears describes a finish similar to a part sanded with 600 to 1000 grit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo dust from friction:\u003c\/strong\u003e the TDS states it does not shed dust under high-speed friction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistant to yellowing\u003c\/strong\u003e and to loss of properties over time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not require the Pulsing Release Module.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eA display miniature doesn't take any punishment. A board game figure, an articulated part or a housing that gets assembled and disassembled does: rubbing, knocks against the table, fingernails, other parts. PAWR10 is made for exactly that. It combines high surface hardness (2H) with more toughness than a detail resin, so the part withstands use without scratching or chipping right away.\u003c\/p\u003e\n\u003cp\u003eUses suggested by HeyGears:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoard game and wargame figures and tokens that are handled every game.\u003c\/li\u003e\n\u003cli\u003eModels with moving parts and BJDs (ball-jointed dolls), where the joints rub against each other.\u003c\/li\u003e\n\u003cli\u003eConsumer electronics accessories.\u003c\/li\u003e\n\u003cli\u003eGears and contact parts.\u003c\/li\u003e\n\u003cli\u003eOutdoor gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth colours are light shades that are easy to paint. HeyGears describes it as an easy-to-paint resin, and in cream it also looks good unpainted on functional parts.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears, PAWR10 is compatible with the Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro, using the HeyGears Blueprint process packages. It does not require the Pulsing Release Module (PRM).\u003c\/p\u003e\n\u003cp\u003eAbout the light source: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work at 385 nm; the Reflex RS and RS Turbo at 405 nm. HeyGears validates it on both families with its own profiles. That doesn't make it suitable for other 405 nm printers: outside the Reflex series there is no official profile.\u003c\/p\u003e\n\u003cp\u003eIf you have the PRM on a Reflex RS or RS Turbo, PAWR10 is on the kit's list of compatible resins. Compatible printers in our shop: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e. More models in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/3d-resin-printers\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), rev. 02.2025. Average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePencil hardness\u003c\/td\u003e\n\u003ctd\u003eGB\/T 6739\u003c\/td\u003e\n\u003ctd\u003e2H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e64 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e4,300 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1,290 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1,300 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e34 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e58 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e52 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e81 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e2.5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e373 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e200 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2\/2 Pro) and 405 nm (Reflex RS\/RS Turbo), always with HeyGears profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e cream and cream yellow. Same technical data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 106 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.0-1.5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e HeyGears equates its test to about 3 years indoors, with less than 30 % loss of properties, no noticeable colour change and a deviation of ±0.1 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eExposure and curing times are not in the technical data sheet: they come in the HeyGears Blueprint process packages. You select PAWR10 when preparing the print and the Reflex applies the parameters. You don't need to calibrate the resin.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle. At 373 mPa·s it's a free-flowing resin that's easy to handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e use the solvent specified in the process package. With the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e, washing involves almost no contact with the resin. For manual washing, see \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e is HeyGears' station for the Reflex platform, with dual-wavelength UV and heat. More options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticulated parts:\u003c\/strong\u003e leave clearance in the joints. Friction resistance is no substitute for well-set tolerances in the design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and these hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways use nitrile gloves, safety glasses and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat sources. Liquid resin must not go down the drain: cure it and dispose of it according to local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAWR10\u003c\/strong\u003e: functional parts that get touched, rubbed or knocked. Prioritises surface and impact resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e: finer detail (0.1-0.15 mm pillars) and more rigidity, for display miniatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg\"\u003ePAF10\u003c\/a\u003e: if the part needs to bend without breaking (46 % elongation in volcanic grey).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e: structural parts and load-bearing jigs and fixtures, with 69 MPa tensile strength. Requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: standard resin for prototypes and models without demanding use requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore technical resins in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/engineering-3d-resins\"\u003eengineering resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003eFor parts exposed to heat: heat deflection at 52 °C.\u003c\/li\u003e\n\u003cli\u003eFor parts in prolonged contact with water: it absorbs 2.5 %, more than other resins in the range.\u003c\/li\u003e\n\u003cli\u003eFor flexible or elastic parts: it's a rigid, tough resin and doesn't bend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use PAWR10 on a printer that isn't a HeyGears?\u003c\/h4\u003e\n\u003cp\u003eWe don't sell it for that. It's a resin for the HeyGears Reflex series (385 nm, and 405 nm on the RS and RS Turbo), with parameters in HeyGears Blueprint. There are no official profiles for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it a 385 nm or a 405 nm resin?\u003c\/h4\u003e\n\u003cp\u003eBoth, but only within the HeyGears range. The Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro cure it at 385 nm; the Reflex RS and RS Turbo at 405 nm. In both cases with HeyGears Blueprint profiles. The fact that it works on an RS at 405 nm doesn't mean it works on any 405 nm printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. It works with the standard vat. If you have the PRM on a Reflex RS or RS Turbo, it's compatible too.\u003c\/p\u003e\n\u003ch4\u003eWhat does 2H hardness mean?\u003c\/h4\u003e\n\u003cp\u003eIt's the result of the pencil hardness test (GB\/T 6739): a 2H pencil doesn't scratch the surface. HeyGears compares it to the hardness of car paint.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between cream and cream yellow?\u003c\/h4\u003e\n\u003cp\u003eOnly the colour. The technical data sheet and safety data sheet are the same for both.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for BJD dolls and articulated figures?\u003c\/h4\u003e\n\u003cp\u003eYes, HeyGears recommends it for BJD dolls and moving models because of its wear resistance and because it doesn't shed dust from friction.\u003c\/p\u003e\n\u003ch4\u003eDoes it yellow over time?\u003c\/h4\u003e\n\u003cp\u003eHeyGears presents it as resistant to yellowing. After its ageing test, equivalent to about 3 years indoors, the colour change is not noticeable (ΔE less than 2).\u003c\/p\u003e\n\u003ch4\u003eCan it be painted?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears describes it as easy to paint, and both light shades take primer well.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Cream yellow","offer_id":55384208114001,"sku":"DIST-6971437941676","price":57.99,"currency_code":"EUR","in_stock":true},{"title":"Cream","offer_id":55384208146769,"sku":"DIST-6971437941690","price":57.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pawr10-crema-1kg.jpg?v=1792509652"},{"product_id":"resina-heygears-ultraprint-paww20-lavable-al-agua-1kg","title":"HeyGears UltraPrint PAWW20 - Water Washable Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAWW20: water-washable resin for Reflex printers\u003c\/h2\u003e\n\u003cp\u003ePAWW20 is HeyGears' water-washable resin. Parts come out clean after a 2-minute rinse in water, with no isopropyl alcohol or other solvents, and post-curing takes just 5 minutes. It has a low odour, very low viscosity and decent toughness, and it leaves a smooth surface finish. It comes in translucent pink in a 1 kg bottle for HeyGears Reflex printers.\u003c\/p\u003e\n\u003cp\u003eHeyGears positions it for concept prototypes and rapid iterations, from figures to industrial parts, and for anyone who doesn't want to, or can't, work with alcohol at home.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: resin for HeyGears Reflex printers (385 and 405 nm)\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PAWW20 is validated on two types of machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 385 nm:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385+ nm UV light, according to HeyGears).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 405 nm:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe fact that it works on the Reflex RS doesn't make it a resin for any 405 nm printer.\u003c\/strong\u003e HeyGears doesn't provide profiles for LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality and similar), nor does it guarantee results on them. If you're looking for a water-washable resin for another printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/water-washable-3d-resins\"\u003ewater-washable 3D resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater washing:\u003c\/strong\u003e a 2-minute rinse and the part comes out clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast curing:\u003c\/strong\u003e 5 minutes without heat in the UltraCraft Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery low viscosity:\u003c\/strong\u003e 64 mPa·s, with low odour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToughness:\u003c\/strong\u003e 3230 J\/m² work of fracture and 16 % elongation at break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachinable:\u003c\/strong\u003e can be drilled and tapped during the first month after printing, according to HeyGears\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth surface\u003c\/strong\u003e and good detail: 0.2 mm minimum wall and 0.15 mm gaps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Pulsing Release Module:\u003c\/strong\u003e prints with the standard vat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, translucent pink\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eFor figures, miniatures, concept prototypes and rapid-iteration parts where what matters is printing, cleaning and reviewing in a short time. Since it doesn't need alcohol, you save on the IPA container, the fumes and the cost of solvent.\u003c\/p\u003e\n\u003cp\u003eHeyGears specifically recommends it for anyone who is sensitive to the smell of alcohol or can't keep it in their workspace: a small flat, a classroom or a shared workshop. Note: water-washable doesn't mean the resin is harmless. Handle it with the same protection as any other resin, and don't pour the wash water down the drain (we explain why below).\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with HeyGears printers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible according to HeyGears' compatibility table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e no. PAWW20 is not used with the Pulsing Release Module; print it with the standard resin vat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that compatibility and process packages are being updated; whatever appears in Blueprint Studio for your printer takes precedence. If you're looking for a machine, take a look at the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e5.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e25 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e16 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3230 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1450 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e32 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e58 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e49 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e80 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e64 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamp heat\u003c\/td\u003e\n\u003ctd\u003eIEC 60068-2-78\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a deviation of ±10 %. The 5.9 % water absorption is high compared with the alcohol-washed UltraPrint resins (between 0.9 and 1.8 %): that's the price of being water-washable. In its technical data sheet, HeyGears shows a PAWW20 figure that withstands 24 hours soaking without cracking, but we wouldn't use it for parts that will be wet or in very humid environments.\u003c\/p\u003e\n\u003ch4\u003eAccuracy and design minimums\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTolerance: ±0.08 mm up to 20 mm, ±0.14 mm up to 50 mm and ±0.19 mm up to 100 mm\u003c\/li\u003e\n\u003cli\u003eMinimum wall: 0.2 mm (0.22 mm unsupported)\u003c\/li\u003e\n\u003cli\u003eMinimum gap: 0.15 mm; minimum hole and pillar: 0.4 mm\u003c\/li\u003e\n\u003cli\u003eUnsupported angle: 20°; 0.8 mm overhang\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the vat. Slice in Blueprint Studio, selecting PAWW20. If you're not going to print within 3 days, filter the resin and return it to the bottle; don't leave it in the vat for more than 7 days, as it absorbs moisture and starts causing print failures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e rinse the part with water for 2 minutes. HeyGears recommends a first wash in used water to remove most of the resin and a second in clean water for the details. Its guide also offers an option with 95 % alcohol in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e (1 + 1 minutes at 180 rpm), but the whole point of this resin is not needing it. Dry the part thoroughly before curing it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWash water doesn't go down the drain.\u003c\/strong\u003e It contains dissolved resin and is a pollutant. HeyGears asks you not to pour it away and to follow local regulations. For its other water-washable resin, PAWW10, it explains how to handle it: let the water evaporate and cure the residue in the sun or in the curing station before disposing of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, fast mode, no heat and in air: 5 minutes at room temperature. HeyGears recommends sending the job from Blueprint. More options in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure stations\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrilling and tapping:\u003c\/strong\u003e if you're going to machine the part, do it within the first month after printing, which is the timeframe HeyGears gives.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAWW20 carries the signal word \"Warning\": it is harmful if swallowed (H302), causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317), may cause respiratory irritation (H335) and may cause damage to organs through prolonged exposure (H373).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses even when washing with water, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and see a doctor.\u003c\/li\u003e\n\u003cli\u003eFlash point: 104 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore it sealed between 15 and 28 °C, away from sunlight and moisture. Shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eNeither the liquid resin nor the wash water should go down the drain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich one to choose in the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: if you don't mind using alcohol, it offers better accuracy (±0.05 mm), much lower water absorption and three colours.\u003c\/li\u003e\n\u003cli\u003ePAB10: grey, for miniatures you plan to sand and paint, with 45 J\/m impact strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, for functional parts that need to withstand impacts and some heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: if you want genuine transparency rather than translucent pink.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you use the Pulsing Release Module and don't want to go back to the standard vat.\u003c\/li\u003e\n\u003cli\u003eIf your parts will be in contact with water or moisture: it absorbs 5.9 %.\u003c\/li\u003e\n\u003cli\u003eIf you need maximum dimensional accuracy or load-bearing parts: PAS10 or PAU11 are better choices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it really wash with just water?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears specifies a 2-minute water rinse to leave the part clean, without isopropyl alcohol.\u003c\/p\u003e\n\u003ch4\u003eCan I pour the wash water down the sink?\u003c\/h4\u003e\n\u003cp\u003eNo. It contains dissolved resin. Let it evaporate, cure the residue and dispose of it according to your local council's regulations.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that PAWW20 is not used with the Pulsing Release Module. Print it with the standard resin vat.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on a 405 nm Elegoo or Anycubic?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. It works on the Reflex RS, which is 405 nm, but with HeyGears' own profile. The manufacturer doesn't provide profiles or guarantee results on printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhich HeyGears printers does it work on?\u003c\/h4\u003e\n\u003cp\u003eOn the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro (385 nm) and on the Reflex RS and RS Turbo (405 nm).\u003c\/p\u003e\n\u003ch4\u003eHow long does it need to cure?\u003c\/h4\u003e\n\u003cp\u003e5 minutes at room temperature in the UltraCraft Cure, in fast mode and without heat.\u003c\/p\u003e\n\u003ch4\u003eDoes it smell strongly?\u003c\/h4\u003e\n\u003cp\u003eHeyGears describes it as low-odour. Even so, always work in a ventilated area.\u003c\/p\u003e\n\u003ch4\u003eCan it be drilled or tapped?\u003c\/h4\u003e\n\u003cp\u003eYes, during the first month after you print the part, according to HeyGears.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384208277841,"sku":"DIST-6971437941799","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-lavable-agua-heygears-ultraprint-paww20-rosa-1kg.jpg?v=1792509654"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/collections\/heygears-reflex-2-pro-impresora-3d-resina-385nm.jpg?v=1792585496","url":"https:\/\/mrresin.es\/en\/collections\/heygears.oembed?page=2","provider":"Mr Resin","version":"1.0","type":"link"}