{"title":"Technical filaments: ASA, ABS, PC, and carbon fiber","description":"\u003cp\u003eWhen PLA and PETG aren't up to the job, these step in: filaments that handle real heat, UV exposure, and mechanical stress. Here you'll find ASA, ABS, polycarbonate, carbon fiber reinforced filaments, and PVA support filament. Before you buy, check what your printer needs to run them. Looking for something more beginner-friendly? Head back to our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003e3D printer filaments\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"filamento-anycubic-asa","title":"🔥Anycubic ASA Filament, ideal for outdoors and high temperatures🔥","description":"\u003ch2\u003eAnycubic ASA Filament: Strength and Style! 🌟\u003c\/h2\u003e\n\u003cp\u003eLooking for a filament that can handle the weather and look great? Anycubic ASA filament is your perfect solution. Designed to offer superior weather resistance, your printed models will be protected against sun, water, and aging. ☀️💧 Ideal for outdoor use!\u003c\/p\u003e\n\u003ch2\u003eWeatherproof Qualities 🌦️\u003c\/h2\u003e\n\u003cp\u003eThis filament stands out for its ability to resist UV rays, climate changes, and harsh environments. Forget about discoloration and wear; your prints will remain intact even after prolonged outdoor exposure. Perfect for projects that require durability and an aesthetic finish.\u003c\/p\u003e\n\u003ch2\u003eMechanical Strength 💪\u003c\/h2\u003e\n\u003cp\u003eNot only is it weather resistant, but it also delivers excellent mechanical performance. Models printed with Anycubic ASA can withstand moderate impact forces without warping or breaking. Ideal for engineering parts, plant tools, or automotive accessories.\u003c\/p\u003e\n\u003ch2\u003eHigh Temperatures 🔥\u003c\/h2\u003e\n\u003cp\u003eWith a heat deflection temperature of up to 90°C, this filament outperforms other materials such as ABS and PLA. If you need a filament that can handle demanding conditions, Anycubic ASA is your best ally.\u003c\/p\u003e\n\u003cp\u003eBring your outdoor ideas to life with quality and strength! 🌿\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch3\u003e Make your creations come to life flawlessly with Anycubic ASA filament!\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Mr Resin Telegram\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003e\u003cimg height=\"256\" width=\"252\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/Mr_Resin_logo.png?v=1720643774\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Mr Resin Telegram channel\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003e\u003cstrong\u003eFind us on Telegram @MrResin3D\u003c\/strong\u003e\u003c\/a\u003e to take part in our giveaways and get the best deals on the market for 3D printing materials 🔥\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDon't miss out on this incredible deal!!!!  \u003c\/p\u003e\n\u003cp\u003epla+, asa, petg, kobra max, kobra 2, creality, ender, prusa, bambulab, bambu lab, abs, sunlu, jayo, buy cheap PLA filament, buy anycubic filament, ASA filament on sale, buy cheap Anycubic ASA filament, buy Anycubic ASA\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Black ASA","offer_id":49225893413201,"sku":null,"price":21.99,"currency_code":"EUR","in_stock":true},{"title":"White ASA","offer_id":49225893445969,"sku":null,"price":21.99,"currency_code":"EUR","in_stock":true},{"title":"Gris ASA","offer_id":49225893478737,"sku":null,"price":21.99,"currency_code":"EUR","in_stock":true},{"title":"Rojo ASA","offer_id":55197473112401,"sku":"AHASRR-101","price":21.99,"currency_code":"EUR","in_stock":true},{"title":"Azul Mar Profundo ASA","offer_id":55197473145169,"sku":"AHASDS-101","price":21.99,"currency_code":"EUR","in_stock":true},{"title":"Verde Oliva ASA","offer_id":55197473177937,"sku":"AHASOG-101","price":21.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-asa-filament-negro-asa-oficial.jpg?v=1791303339"},{"product_id":"filamento-abs-anycubic","title":"🧱 Anycubic ABS Filament","description":"\u003ch2 class=\"p2\"\u003e🔹\u003cb\u003e Versatility in resistant parts\u003c\/b\u003e\n\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003eDiscover the \u003cb\u003eABS Filament\u003c\/b\u003e, perfect for printing durable prototypes, functional enclosures and models that require high impact resistance and resistance to elevated temperatures.\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003e🔥\u003cb\u003e Feel the industrial robustness\u003c\/b\u003e\n\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003eIts anti-warping formula ensures flat prints across the entire base, eliminating warping, while its hardness allows for solid and reliable parts at every layer.\u003c\/p\u003e\n\u003ch2 class=\"p2\"\u003e🛠️\u003cb\u003e Main advantages\u003c\/b\u003e\n\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003eEffortless printing:\u003c\/b\u003e Smart settings that reduce warping and facilitate material flow.\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003eHigh impact resistance:\u003c\/b\u003e Ideal for gears, tools and mechanical components subjected to stress.\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003eThermal stability:\u003c\/b\u003e Withstands elevated service temperatures without losing shape or rigidity.\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\n\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003cb\u003eColour variety:\u003c\/b\u003e Available in Black, White and Grey to suit any project.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"p2\"\u003e📦\u003cb\u003e Presentations and prices\u003c\/b\u003e\n\u003c\/h2\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" class=\"t1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003ePack\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eDiscount\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003ePrice\/kg\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eTotal price\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e3 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e3% Off\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€22.30\/kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€21.99\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e8% Off\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€21.15\/kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€21.99\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e10 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e10% Off\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€20.69\/kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€21.99\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e20 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e20% Off\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€18.39\/kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p3\"\u003e€21.99\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 data-end=\"1326\" data-start=\"1263\"\u003e\u003c\/h2\u003e\n\u003ch2 data-end=\"1326\" data-start=\"1263\"\u003e🚀 Get your ABS Filament now before it sells out!\u003c\/h2\u003e\n\u003cp data-end=\"1489\" data-start=\"1327\"\u003eDon't wait any longer: choose the colour and pack that best suits your workshop and enjoy strong, precise prints with 100% secure payment and free express shipping.\u003c\/p\u003e\n\u003ch2 data-end=\"1521\" data-start=\"1496\"\u003e\u003c\/h2\u003e","brand":"Anycubic","offers":[{"title":"Black","offer_id":51237326487889,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":51237326520657,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":51237326553425,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":55197478584657,"sku":"HABRR-103","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":55197478617425,"sku":"HABDB-103","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":55197478650193,"sku":"HABVO-103","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":55197478682961,"sku":"HABVY-103","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":55197478715729,"sku":"HABCG-103","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Azul Mar Profundo","offer_id":55197478748497,"sku":"AHABDS-101","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Texture Gris","offer_id":55197478781265,"sku":"AHABGY-101","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Lavanda","offer_id":55197478814033,"sku":"AHABLA-101","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Caqui","offer_id":55197478846801,"sku":"AHABKH-101","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Verde Oliva","offer_id":55197478879569,"sku":"AHABOG-101","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Azul Horizonte","offer_id":55197478912337,"sku":"AHABHB-101","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Azul Marino","offer_id":55197478945105,"sku":"AHABNB-101","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-abs-filament-negro-oficial.jpg?v=1791303411"},{"product_id":"filamento-asa-elegoo","title":"🏗️ Elegoo ASA Filament for 3D printer — 1 Kg","description":"\u003c!-- \n  FILAMENTO ELEGOO ASA 1.75 mm — 1 Kg\n  Descripción de producto para Shopify — Mr Resin\n  \n  META TITLE (≤60 chars): Elegoo ASA Filament 1.75 mm 1 Kg | Buy at Mr Resin\n  META DESCRIPTION (≤155 chars): Buy Elegoo ASA filament 1.75 mm 1 Kg. UV and outdoor resistant, superior thermal stability. 24h shipping from Spain. Official distributor.\n  \n  URL HANDLE sugerido: \/products\/filamento-asa-elegoo-1-75mm-1kg\n  \n  KEYWORD PRINCIPAL: Elegoo ASA filament\n  KEYWORDS SECUNDARIAS: ASA filament 1.75 mm, ASA for 3D printer, outdoor 3D filament, UV resistant filament, buy Elegoo ASA Spain\n--\u003e\n\u003ch2\u003eElegoo ASA Filament, the all-terrain outdoor material\u003c\/h2\u003e\n\u003cp\u003eIf you need to print parts that are going to live outdoors and you don't want the sun or rain to destroy them within two months, Elegoo ASA filament is exactly what you're looking for. No half measures. 🎯\u003c\/p\u003e\n\u003cp\u003eASA (Acrylonitrile Styrene Acrylate) is the bigger brother of ABS, but with superpowers: \u003cstrong\u003eresistance to UV rays, water, and outdoor weather\u003c\/strong\u003e that keeps your parts holding up outside without fading or becoming brittle. Think camera mounts, sensor housings, drone parts, garden accessories, or anything that needs to withstand whatever gets thrown at it. ☀️🌧️\u003c\/p\u003e\n\u003cp\u003eElegoo has engineered this filament with a dimensional accuracy of ±0.02 mm, and it comes mechanically wound on an eco-friendly cardboard spool. Vacuum-sealed with desiccant so it arrives at your door in perfect condition, with no moisture or surprises. 📦\u003c\/p\u003e\n\u003ch2\u003e✅ What makes Elegoo ASA filament special\u003c\/h2\u003e\n\u003cp\u003e☀️ \u003cstrong\u003eUV and outdoor weather resistance\u003c\/strong\u003e — Your parts won't degrade, yellow, or become brittle in the sun. Ideal for outdoor applications that need to last.\u003c\/p\u003e\n\u003cp\u003e🔥 \u003cstrong\u003eSuperior thermal stability\u003c\/strong\u003e — Handles significantly higher temperatures than PLA or PETG without warping. If your part is going to be near a heat source, ASA is your material.\u003c\/p\u003e\n\u003cp\u003e💪 \u003cstrong\u003eABS-level mechanical properties\u003c\/strong\u003e — Impact resistance, toughness, and rigidity comparable to ABS, but with the added advantage of not deteriorating outdoors.\u003c\/p\u003e\n\u003cp\u003e📐 \u003cstrong\u003eDimensional accuracy ±0.02 mm\u003c\/strong\u003e — Manufactured to strict tolerances so your functional parts fit exactly as they should.\u003c\/p\u003e\n\u003cp\u003e🧵 \u003cstrong\u003eClean winding, tangle-free\u003c\/strong\u003e — Mechanically wound with manual inspection. No knots or surprises mid-print.\u003c\/p\u003e\n\u003cp\u003e💨 \u003cstrong\u003eNo clogs or bubbles\u003c\/strong\u003e — Fully dried before packaging and vacuum-sealed with desiccant. Ready to load and print.\u003c\/p\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eASA (Acrylonitrile Styrene Acrylate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensional accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 g (1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEmpty spool weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~154 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtrusion temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e240–260 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLayer fan\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOff or very low (0–20%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEco-friendly cardboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch2\u003e🖨️ Which printers is it compatible with?\u003c\/h2\u003e\n\u003cp\u003eAny FDM 3D printer that can reach the required extrusion temperatures (240–260 °C). The entire Elegoo Neptune range, the Centauri Carbon, and the vast majority of FDM printers on the market such as Bambu Lab, Creality, Prusa and similar. If your printer handles ABS, it can handle ASA. ✅\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommendation:\u003c\/strong\u003e To get the most out of ASA and minimise warping, the ideal setup is to print with a closed enclosure. If your printer doesn't have one, a draft shield in your slicer also helps quite a bit.\u003c\/p\u003e\n\u003ch2\u003e🚀 Tips for printing with ASA\u003c\/h2\u003e\n\u003cp\u003e🔥 \u003cstrong\u003ePreheat the bed\u003c\/strong\u003e to 90–110 °C and use adhesive (glue stick or hairspray) for a good first layer\u003c\/p\u003e\n\u003cp\u003e🌡️ \u003cstrong\u003eExtruder between 240–260 °C\u003c\/strong\u003e — start at 250 °C and adjust based on results\u003c\/p\u003e\n\u003cp\u003e💨 \u003cstrong\u003eFan at minimum\u003c\/strong\u003e — ASA needs to cool slowly for good layer adhesion. Turn the fan off or keep it at 10–20% maximum\u003c\/p\u003e\n\u003cp\u003e🏠 \u003cstrong\u003eClosed enclosure\u003c\/strong\u003e if possible — Avoid air currents that cause warping and cracking\u003c\/p\u003e\n\u003cp\u003e📏 \u003cstrong\u003eModerate speed\u003c\/strong\u003e — Start at 40–60 mm\/s and print the first layer slower\u003c\/p\u003e\n\u003cp\u003e🧹 \u003cstrong\u003eClean the bed thoroughly\u003c\/strong\u003e before each print so the ASA sticks properly\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003e❓ Frequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between ASA and ABS?\u003c\/h3\u003e\n\u003cp\u003eASA is essentially an improved ABS designed for outdoor use. The mechanical properties are very similar (impact resistance, rigidity, toughness), but ASA adds resistance to UV rays and weathering. Your parts won't yellow or become brittle in the sun, which is something that does happen with ABS. ASA also tends to produce less warping than ABS and has less odour during printing. 💪\u003c\/p\u003e\n\u003ch3\u003eDo I need a closed printer to print ASA?\u003c\/h3\u003e\n\u003cp\u003eIt is highly recommended, yes. ASA is sensitive to sudden temperature changes and air currents. A closed enclosure helps greatly in avoiding warping and cracking. That said, there are people who print ASA on open printers with good results by using a draft shield and dialling in the settings properly. It's not impossible, but an enclosure saves you a lot of headaches. 🏠\u003c\/p\u003e\n\u003ch3\u003eCan I sand and paint ASA parts?\u003c\/h3\u003e\n\u003cp\u003eYes, no problem. ASA can be sanded, painted, and even smoothed with acetone vapour to achieve a smooth, glossy finish. It is one of the few filaments that allows this type of chemical post-processing. 🎨\u003c\/p\u003e\n\u003ch3\u003eIs it safe to print ASA at home?\u003c\/h3\u003e\n\u003cp\u003eASA emits fewer fumes than ABS, but it is still important to print in a well-ventilated space or with an air filtration system. It is not toxic under normal conditions of use, but ventilation is key. If you use an enclosure, an active carbon filter is a good idea. ⚠️\u003c\/p\u003e\u003ch3\u003eWhat bed surface is best for ASA?\u003c\/h3\u003e\n\u003cp\u003ePEI works great with ASA, especially with a thin layer of glue stick. It also works well on glass with hairspray or specialized adhesive. The important thing is that the bed is nice and hot (90–110 °C) and clean. 🔧\u003c\/p\u003e\n\u003ch3\u003eHow long does unopened ASA filament last?\u003c\/h3\u003e\n\u003cp\u003eVacuum sealed and stored in a dry place at room temperature, ASA keeps perfectly for months. Once opened, it is recommended to store it in a bag with desiccant or in a dry box to prevent it from absorbing moisture. 🗓️\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e💬 \u003cstrong\u003eDo you have any questions about this filament or about how to configure your 3D printer for ASA?\u003c\/strong\u003e Come join our \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003eTelegram group\u003c\/a\u003e — we are a great bunch of makers who help each other out. We look forward to seeing you! 🔥\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOfficial Elegoo distributor in Spain\u003c\/strong\u003e 🇪🇸 · Shipping within 24h from our warehouse\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSafety and storage\u003c\/strong\u003e ⚠️\u003cbr\u003e🌡️ Print in a ventilated area or with an air filter. ASA may emit particles during extrusion.\u003cbr\u003e📦 Store in a dry place, protected from moisture. Use a bag with desiccant once the packaging has been opened.\u003cbr\u003e🧤 Do not ingest. Keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003e📦 All products are shipped with the maximum possible remaining shelf life. The remaining period may vary depending on the available batch and stock rotation.\u003c\/p\u003e\n\u003cp\u003e💬 Do you have questions about which Elegoo filament to choose for your project? Join our community on \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003eTelegram\u003c\/a\u003e — we help you choose and you can take part in exclusive giveaways 🎁\u003c\/p\u003e\n\u003cp\u003e✨ Happy Printing! 🚀\u003c\/p\u003e","brand":"Elegoo","offers":[{"title":"ASA Elegoo Black","offer_id":53208814747985,"sku":null,"price":15.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo White","offer_id":53208814780753,"sku":null,"price":15.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo Grey","offer_id":53208814813521,"sku":null,"price":15.99,"currency_code":"EUR","in_stock":false},{"title":"Elegoo Red ASA","offer_id":53208814846289,"sku":null,"price":15.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo Blue","offer_id":53208814879057,"sku":null,"price":15.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo Green","offer_id":53208814911825,"sku":null,"price":15.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/Elegoo_ASA_1KG_1.75mm-__negro.webp?v=1772730275"},{"product_id":"filamento-pla-cf-elegoo-fibra-de-carbono","title":"⚡ Elegoo PLA-CF Filament with Carbon Fiber — 1 Kg","description":"\u003ch2\u003e⚡ Elegoo PLA-CF Filament, when strength matters\u003c\/h2\u003e\n\u003cp\u003eIf you're looking for a filament that prints as easily as PLA but with the rigidity and strength of a technical material, Elegoo's PLA-CF is the answer. No complications, no drama. 🎯\u003c\/p\u003e\n\u003cp\u003eThe carbon fiber mixed into it gives your parts \u003cstrong\u003erigidity and mechanical strength well above standard PLA\u003c\/strong\u003e, while keeping a light weight and ease of printing that's almost indistinguishable from regular PLA. Functional prototypes, mechanical parts, structural supports, enclosures, drone accessories… if you need the part to hold up and look spectacular too, this filament is for you. 💪\u003c\/p\u003e\n\u003cp\u003eAnd there's a bonus: the carbon fiber texture \u003cstrong\u003econceals layer lines\u003c\/strong\u003e remarkably well. Your parts come out with a matte, uniform, professional finish that looks like it came off an injection molder. No post-processing, no sanding. Straight from the bed to the table. 🔥\u003c\/p\u003e\n\u003ch2\u003e✅ What makes Elegoo PLA-CF special\u003c\/h2\u003e\n\u003cp\u003e💪 \u003cstrong\u003eSuperior rigidity and strength\u003c\/strong\u003e — Carbon fiber reinforces the PLA matrix, delivering parts that are far more rigid and resistant than conventional PLA. Ideal for functional parts that need to bear loads.\u003c\/p\u003e\n\u003cp\u003e🪶 \u003cstrong\u003eLight but strong\u003c\/strong\u003e — The best strength-to-weight ratio you'll find in a filament of this range. Perfect for applications where weight matters (drones, RC, wearables).\u003c\/p\u003e\n\u003cp\u003e📐 \u003cstrong\u003eExcellent dimensional accuracy\u003c\/strong\u003e — Carbon fiber minimizes warping and shrinkage. Parts come out with precise measurements, no deformation or post-printing surprises.\u003c\/p\u003e\n\u003cp\u003e🖤 \u003cstrong\u003eSpectacular matte finish\u003c\/strong\u003e — The carbon texture hides layer lines and gives a professional look without any sanding or painting. Parts that impress from minute one.\u003c\/p\u003e\n\u003cp\u003e🖨️ \u003cstrong\u003ePrints like regular PLA\u003c\/strong\u003e — No special profile or unusual settings needed. If you already print PLA, you can print PLA-CF. No clogs, no bubbles, no headaches.\u003c\/p\u003e\n\u003cp\u003e🎨 \u003cstrong\u003eCompatible with standard resin\u003c\/strong\u003e — You can combine it with regular PLA in multicolor prints to create striking texture and color contrasts.\u003c\/p\u003e\n\u003ch2\u003e📋 Technical specs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA + Carbon Fiber (PLA-CF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensional accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 g (1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEmpty spool weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~154 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtrusion temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200–230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e45–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened steel (≥0.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEco cardboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack (carbon fiber finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e🖨️ Which 3D printers is it compatible with?\u003c\/h2\u003e\n\u003cp\u003eThe vast majority of FDM 3D printers on the market: the full Elegoo Neptune and Centauri range, Bambu Lab, Creality, Prusa, and more. If your 3D printer runs PLA, it can run PLA-CF. ✅\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eImportant — Use a hardened steel nozzle.\u003c\/strong\u003e Carbon fiber is abrasive and wears down standard brass nozzles over time. If you're going to print several spools of PLA-CF, a hardened steel nozzle is the investment that will save you trouble down the line. If you're only making a few occasional parts, a brass nozzle will hold up, but keep this in mind for the long term.\u003c\/p\u003e\u003ch2\u003e🚀 Tips for printing with PLA-CF\u003c\/h2\u003e\n\u003cp\u003e🌡️ \u003cstrong\u003eExtrusion temperature 200–230 °C\u003c\/strong\u003e — The same ranges as standard PLA. Start at 210 °C and adjust according to your 3D printer\u003c\/p\u003e\n\u003cp\u003e🛏️ \u003cstrong\u003eBed at 45–60 °C\u003c\/strong\u003e — PEI, glass with adhesive or smooth surface work perfectly\u003c\/p\u003e\n\u003cp\u003e🔩 \u003cstrong\u003eHardened steel nozzle\u003c\/strong\u003e — Essential to avoid premature wear from the abrasion of carbon fibers\u003c\/p\u003e\n\u003cp\u003e📏 \u003cstrong\u003eStandard PLA speed\u003c\/strong\u003e — No need to go slower or make special adjustments. 40–80 mm\/s works great\u003c\/p\u003e\n\u003cp\u003e💨 \u003cstrong\u003eNormal layer fan\u003c\/strong\u003e — Being PLA-based, it benefits from active cooling just like any PLA\u003c\/p\u003e\n\u003cp\u003e🧹 \u003cstrong\u003eStandard retraction\u003c\/strong\u003e — The same values you use with your regular PLA should work without any issues\u003c\/p\u003e\n\u003ch2\u003e❓ Frequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does PLA-CF differ from regular PLA?\u003c\/h3\u003e\n\u003cp\u003ePLA-CF contains carbon fibers blended into the PLA matrix. This gives it significantly more rigidity, better mechanical strength, less shrinkage and a matte textured finish that conceals layer lines. In practice, parts are stiffer, better-looking and more dimensionally accurate. The best part: it prints practically the same as standard PLA. 💪\u003c\/p\u003e\n\u003ch3\u003eDo I need a special nozzle?\u003c\/h3\u003e\n\u003cp\u003eIt is highly recommended to use a hardened steel nozzle. Carbon fiber is abrasive and gradually wears down brass nozzles with use. If you're only going to print a single spool occasionally, brass will hold up, but for regular use, hardened steel is essential. Nozzles of 0.4 mm or larger work perfectly. 🔩\u003c\/p\u003e\n\u003ch3\u003eIs it harder to print than PLA?\u003c\/h3\u003e\n\u003cp\u003eNo. That is precisely its strong point. It prints with the same settings, the same temperatures and the same ease as regular PLA. The difference lies in the final result: stiffer, more precise parts with a better finish. 🖨️\u003c\/p\u003e\n\u003ch3\u003eCan I paint or post-process it?\u003c\/h3\u003e\n\u003cp\u003eYes, it can be sanded and painted without any issues, although the appeal of PLA-CF is that the matte finish with carbon fiber texture looks so good that most of the time there is no need to touch anything. If you want to paint it, a light primer coat and you're all set. 🎨\u003c\/p\u003e\n\u003ch3\u003eWhat applications is it ideal for?\u003c\/h3\u003e\n\u003cp\u003eFunctional prototypes, mechanical parts, structural supports, electronics enclosures, drone and RC parts, tools and fixtures, and any part where you need rigidity without sacrificing weight or ease of printing. It also looks spectacular on display pieces thanks to its professional matte finish. 🏗️\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with regular PLA in the same print?\u003c\/h3\u003e\n\u003cp\u003eYes. It blends perfectly with Elegoo standard PLA to create multicolor prints with different textures. The contrast between the matte carbon finish and the gloss of regular PLA is very striking. 🔥\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e💬 \u003cstrong\u003eDo you have any questions about PLA-CF or how to configure your 3D printer?\u003c\/strong\u003e Head over to our \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003eTelegram group\u003c\/a\u003e — we're a good bunch of makers who help each other out. We look forward to seeing you! 🔥\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOfficial Elegoo distributor in Spain\u003c\/strong\u003e 🇪🇸 · Shipping within 24h from our warehouse\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eStorage and conservation\u003c\/strong\u003e 📦\u003cbr\u003e🌡️ Store in a dry place at room temperature. PLA-CF can absorb moisture, which affects print quality.\u003cbr\u003e📦 Once opened, store in a bag with desiccant or in a dry box to maintain optimal conditions.\u003cbr\u003e🧤 Do not ingest. Keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003e📦 All products are shipped with the maximum possible remaining shelf life. The remaining period may vary depending on the available batch and stock rotation.\u003c\/p\u003e\u003cp\u003e💬 Do you have questions about which Elegoo filament to choose for your project? Join our community on \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003eTelegram\u003c\/a\u003e — we'll help you choose and you can participate in exclusive giveaways 🎁\u003c\/p\u003e\n\u003cp\u003e✨ Happy Printing! 🚀\u003c\/p\u003e","brand":"Elegoo","offers":[{"title":"Default Title","offer_id":53209012568401,"sku":null,"price":20.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/Elegoo_Filamento_PLA-CF_Negro.webp?v=1772731238"},{"product_id":"anycubic-pla-cf","title":"Anycubic PLA-CF - Filamento PLA fibra de carbono 1,75 mm 1 kg","description":"\u003ch2\u003eAnycubic PLA-CF: rigidez de fibra de carbono con acabado mate (1 kg, 1,75 mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEn resumen:\u003c\/strong\u003e el Anycubic PLA-CF es un PLA reforzado con fibra de carbono que, según Anycubic, ofrece más rigidez y menos deformación que un PLA mate estándar, con un acabado mate que disimula las capas. Es ideal para prototipos, maquetas, figuras y piezas de montaje precisas. Se imprime a 210-250 °C, cama a 55-70 °C, y requiere boquilla de acero endurecido de 0,4 mm o más.\u003c\/p\u003e\n\u003ch3\u003eDatos clave de un vistazo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PLA reforzado con fibra de carbono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de boquilla:\u003c\/strong\u003e 210-250 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de cama:\u003c\/strong\u003e 55-70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoquilla:\u003c\/strong\u003e acero endurecido, ≥ 0,4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpresora cerrada:\u003c\/strong\u003e no necesaria\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecado previo:\u003c\/strong\u003e recomendado, 50-55 °C durante 6-8 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcabado:\u003c\/strong\u003e mate, con líneas de capa muy disimuladas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibilidad:\u003c\/strong\u003e ACE Pro (chip de identificación inteligente)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¿Necesito boquilla endurecida?\u003c\/h3\u003e\n\u003cp\u003eSí. Anycubic especifica boquilla de acero endurecido con un diámetro mínimo de 0,4 mm. La fibra de carbono es abrasiva y desgasta las boquillas de latón. Con acero endurecido, según el fabricante, el filamento fluye con suavidad y prácticamente no se atasca.\u003c\/p\u003e\n\u003ch3\u003e¿En qué mejora al PLA normal?\u003c\/h3\u003e\n\u003cp\u003eSegún Anycubic, la fibra de carbono aporta más rigidez y durabilidad que un PLA mate estándar, con un módulo de flexión un 22 % superior al del PLA convencional y una temperatura de flexión bajo carga (HDT) de 60 °C. Su contracción muy baja da una gran estabilidad dimensional, por lo que es una buena opción para piezas que deben encajar con precisión, utillaje, plantillas, marcos de dron o componentes de interior de coche, aplicaciones que el propio fabricante menciona.\u003c\/p\u003e\n\u003ch3\u003e¿Qué acabado consigue?\u003c\/h3\u003e\n\u003cp\u003eUn acabado mate de aspecto premium sin necesidad de lijar ni chorrear. La fibra reduce la visibilidad de las líneas de capa, algo muy útil en figuras, maquetas arquitectónicas, prototipos mecánicos, mechas o vehículos. Además, Anycubic lo ofrece en seis colores: negro, rojo vintage, gris lava, azul vaquero, verde jade y blanco escama de pez.\u003c\/p\u003e\n\u003ch3\u003eEspecificaciones técnicas\u003c\/h3\u003e\n\u003cp\u003eDatos del fabricante (Anycubic).\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCaracterística\u003c\/th\u003e\n\u003cth\u003eValor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de impresión\u003c\/td\u003e\n\u003ctd\u003e210-250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de cama\u003c\/td\u003e\n\u003ctd\u003e55-70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocidad recomendada\u003c\/td\u003e\n\u003ctd\u003e40-250 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaudal volumétrico máximo\u003c\/td\u003e\n\u003ctd\u003e12 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoquilla\u003c\/td\u003e\n\u003ctd\u003eAcero endurecido, ≥ 0,4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecado\u003c\/td\u003e\n\u003ctd\u003e50-55 °C, 6-8 h (recomendado)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensidad\u003c\/td\u003e\n\u003ctd\u003e1,22 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de fusión\u003c\/td\u003e\n\u003ctd\u003e165 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de flexión bajo carga (0,45 MPa)\u003c\/td\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de Young\u003c\/td\u003e\n\u003ctd\u003e3100 ± 100 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a tracción (X-Y \/ Z)\u003c\/td\u003e\n\u003ctd\u003e44 ± 3 MPa \/ 26 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a flexión\u003c\/td\u003e\n\u003ctd\u003e74 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de flexión\u003c\/td\u003e\n\u003ctd\u003e3500 ± 100 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia al impacto Izod (X-Y)\u003c\/td\u003e\n\u003ctd\u003e25 ± 2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eConsejos de impresión\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMonta una boquilla de acero endurecido de 0,4 mm o mayor antes de cargar la bobina.\u003c\/li\u003e\n\u003cli\u003eSeca el filamento a 50-55 °C durante 6-8 h si ha estado expuesto a la humedad.\u003c\/li\u003e\n\u003cli\u003eNo necesitas pegamento en la cama, según Anycubic.\u003c\/li\u003e\n\u003cli\u003eAnycubic indica en su ficha técnica ventilador al 100 % de capa como punto de partida.\u003c\/li\u003e\n\u003cli\u003ePara piezas funcionales, orienta el modelo de forma que los esfuerzos no vayan en el eje Z: la resistencia entre capas (26 MPa) es menor que en el plano (44 MPa).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompara con otros materiales en nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresión 3D\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreguntas frecuentes sobre el Anycubic PLA-CF\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura necesita el PLA-CF?\u003c\/strong\u003e\u003cbr\u003eSegún Anycubic, 210-250 °C en boquilla y 55-70 °C en la cama.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Puedo usar boquilla de latón?\u003c\/strong\u003e\u003cbr\u003eNo es lo recomendado: Anycubic especifica boquilla de acero endurecido porque la fibra de carbono es abrasiva.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Cuál es la boquilla mínima?\u003c\/strong\u003e\u003cbr\u003e0,4 mm, según el fabricante.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito impresora cerrada?\u003c\/strong\u003e\u003cbr\u003eNo, Anycubic indica que no es necesaria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Hay que secarlo?\u003c\/strong\u003e\u003cbr\u003eEs recomendable: 50-55 °C durante 6-8 horas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es más rígido que el PLA normal?\u003c\/strong\u003e\u003cbr\u003eSí. Según Anycubic, su módulo de flexión es un 22 % superior al del PLA estándar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura aguantan las piezas?\u003c\/strong\u003e\u003cbr\u003eAnycubic indica una HDT de 60 °C (0,45 MPa).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Sirve para piezas funcionales?\u003c\/strong\u003e\u003cbr\u003eSí, el fabricante lo recomienda para prototipos funcionales, plantillas, utillaje, marcos de dron e interiores de automóvil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Se nota la línea de capa?\u003c\/strong\u003e\u003cbr\u003eMuy poco: la fibra de carbono y el acabado mate la disimulan, según Anycubic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es compatible con ACE Pro?\u003c\/strong\u003e\u003cbr\u003eSí, lleva chip de identificación inteligente que la impresora lee automáticamente, sin configuración extra.\u003c\/p\u003e\n\n\u003c!-- mr-enlaces-filamento --\u003e\u003cp\u003e¿Buscas otro color o material? Mira toda nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003efilamentos técnicos\u003c\/a\u003e o todos los \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresora 3D\u003c\/a\u003e.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Black V1","offer_id":55197628367185,"sku":"HPFBK-101","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Rojo vintage","offer_id":55197628694865,"sku":"HPFVR-101","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Gris lava","offer_id":55197628727633,"sku":"HPFLR-101","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Azul vaquero","offer_id":55197628760401,"sku":"HPFCU-101","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Verde jade","offer_id":55197628793169,"sku":"HPFJG-101","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Blanco escama de pez","offer_id":55197628825937,"sku":"HPFFW-101","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-pla-cf-negro.jpg?v=1791302615"},{"product_id":"anycubic-petg-cf","title":"Anycubic PETG-CF - Filamento PETG fibra de carbono 1,75 mm 1 kg","description":"\u003ch2\u003eAnycubic PETG-CF: tenacidad y resistencia al impacto con fibra de carbono (1 kg, 1,75 mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEn resumen:\u003c\/strong\u003e el Anycubic PETG-CF combina la tenacidad del PETG con la rigidez de la fibra de carbono. Según Anycubic, ofrece mucha más rigidez y resistencia al impacto que el PETG estándar, aguanta agua e intemperie y tiene un acabado satinado que disimula las capas. Se imprime a 240-270 °C con cama a 65-70 °C y necesita boquilla de acero endurecido de 0,4 mm o más.\u003c\/p\u003e\n\u003ch3\u003eDatos clave de un vistazo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG reforzado con fibra de carbono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de boquilla:\u003c\/strong\u003e 240-270 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de cama:\u003c\/strong\u003e 65-70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoquilla:\u003c\/strong\u003e acero endurecido, ≥ 0,4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpresora cerrada:\u003c\/strong\u003e no necesaria\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecado previo:\u003c\/strong\u003e obligatorio, 60-65 °C durante 6-8 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpacto Izod (X-Y):\u003c\/strong\u003e 60 ± 4 kJ\/m²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibilidad:\u003c\/strong\u003e ACE Pro (chip de identificación inteligente)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¿Necesito boquilla endurecida?\u003c\/h3\u003e\n\u003cp\u003eSí. Anycubic recomienda expresamente una boquilla de acero endurecido de 0,4 mm o mayor, porque la fibra de carbono es abrasiva. Según el fabricante, una boquilla de latón estándar se desgastará rápidamente, lo que puede empeorar la calidad y provocar atascos.\u003c\/p\u003e\n\u003ch3\u003e¿En qué se diferencia del PLA-CF?\u003c\/h3\u003e\n\u003cp\u003eSegún Anycubic, el PETG-CF aporta la tenacidad y la resistencia al impacto del PETG, de modo que no resulta tan frágil como otros filamentos de fibra de carbono. Su impacto Izod (60 kJ\/m²) es superior al del PLA-CF de la marca (25 kJ\/m²), y también resiste agua e intemperie, manteniendo color y textura en exposiciones prolongadas al exterior. En acabado, el PLA-CF es mate puro, mientras que el PETG-CF tiene una textura satinada con algo más de brillo.\u003c\/p\u003e\n\u003ch3\u003e¿Se deforma o despega de la cama?\u003c\/h3\u003e\n\u003cp\u003eNormalmente no. Anycubic lo ha diseñado con una contracción muy baja para minimizar el warping y lograr gran precisión dimensional, útil en piezas de montaje. Para una buena adhesión, el fabricante aconseja cama caliente y superficie limpia; no requiere pegamento ni impresora cerrada.\u003c\/p\u003e\n\u003ch3\u003eEspecificaciones técnicas\u003c\/h3\u003e\n\u003cp\u003eDatos del fabricante (Anycubic).\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCaracterística\u003c\/th\u003e\n\u003cth\u003eValor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de impresión\u003c\/td\u003e\n\u003ctd\u003e240-270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de cama\u003c\/td\u003e\n\u003ctd\u003e65-70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocidad recomendada\u003c\/td\u003e\n\u003ctd\u003e40-250 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaudal volumétrico máximo\u003c\/td\u003e\n\u003ctd\u003e11 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoquilla\u003c\/td\u003e\n\u003ctd\u003eAcero endurecido, ≥ 0,4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecado\u003c\/td\u003e\n\u003ctd\u003e60-65 °C, 6-8 h (obligatorio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensidad\u003c\/td\u003e\n\u003ctd\u003e1,32 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de reblandecimiento Vicat\u003c\/td\u003e\n\u003ctd\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de flexión bajo carga (0,45 MPa)\u003c\/td\u003e\n\u003ctd\u003e67 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de Young\u003c\/td\u003e\n\u003ctd\u003e2550 ± 100 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a tracción (X-Y \/ Z)\u003c\/td\u003e\n\u003ctd\u003e54 ± 2 MPa \/ 37 ± 3 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a flexión\u003c\/td\u003e\n\u003ctd\u003e88 ± 2 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de flexión\u003c\/td\u003e\n\u003ctd\u003e3100 ± 150 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia al impacto Izod (X-Y)\u003c\/td\u003e\n\u003ctd\u003e60 ± 4 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eConsejos de impresión\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstala una boquilla de acero endurecido (0,4 mm o más) antes de imprimir.\u003c\/li\u003e\n\u003cli\u003eSeca siempre la bobina: Anycubic marca el secado como obligatorio (60-65 °C, 6-8 h).\u003c\/li\u003e\n\u003cli\u003eLimpia bien la cama antes de cada impresión para asegurar la adhesión.\u003c\/li\u003e\n\u003cli\u003eLa ficha técnica de Anycubic parte de ventilador al 60 % como valor inicial.\u003c\/li\u003e\n\u003cli\u003eRespeta el caudal máximo de 11 mm³\/s al subir la velocidad.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEncuentra más opciones en nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresión 3D\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreguntas frecuentes sobre el Anycubic PETG-CF\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura necesita el PETG-CF?\u003c\/strong\u003e\u003cbr\u003eSegún Anycubic, 240-270 °C en boquilla y 65-70 °C en la cama.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito boquilla de acero endurecido?\u003c\/strong\u003e\u003cbr\u003eSí, de 0,4 mm o más. El latón se desgasta rápido con la fibra de carbono.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito impresora cerrada?\u003c\/strong\u003e\u003cbr\u003eNo, Anycubic indica que no es necesaria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Hay que secarlo?\u003c\/strong\u003e\u003cbr\u003eSí, es obligatorio según el fabricante: 60-65 °C durante 6-8 horas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es frágil como otros filamentos de carbono?\u003c\/strong\u003e\u003cbr\u003eNo, según Anycubic combina la rigidez del carbono con la tenacidad del PETG.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Sirve para exterior?\u003c\/strong\u003e\u003cbr\u003eSí, Anycubic lo describe como resistente al agua y a la intemperie, conservando color y textura.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué acabado tiene?\u003c\/strong\u003e\u003cbr\u003eSatinado, con algo más de brillo que el PLA-CF y líneas de capa disimuladas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura soportan las piezas?\u003c\/strong\u003e\u003cbr\u003eAnycubic indica una HDT de 67 °C (0,45 MPa) y un Vicat de 74 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es compatible con ACE Pro?\u003c\/strong\u003e\u003cbr\u003eSí, incluye chip de identificación inteligente que carga los parámetros automáticamente.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿En qué colores está disponible?\u003c\/strong\u003e\u003cbr\u003eNegro, gris titanio, azul índigo y marrón sirope.\u003c\/p\u003e\n\n\u003c!-- mr-enlaces-filamento --\u003e\u003cp\u003e¿Buscas otro color o material? Mira toda nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamento-petg\"\u003ePETG\u003c\/a\u003e o todos los \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresora 3D\u003c\/a\u003e.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Marrón sirope","offer_id":55197629481297,"sku":"HTFYB-101","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Azul índigo","offer_id":55197629874513,"sku":"HTFAF-101","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Gris titanio","offer_id":55197629907281,"sku":"HTFIG-101","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Black V1","offer_id":55197629940049,"sku":"HTFBK-101","price":23.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-petg-cf-marron-sirope.jpg?v=1791302628"},{"product_id":"anycubic-pc","title":"Anycubic PC - Filamento policarbonato 1,75 mm 1 kg","description":"\u003ch2\u003eAnycubic PC: policarbonato resistente al calor y a los impactos (1 kg, 1,75 mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEn resumen:\u003c\/strong\u003e el Anycubic PC es un filamento de policarbonato de grado ingeniería para piezas que deben soportar calor, golpes y exterior. Según Anycubic, alcanza una temperatura de flexión bajo carga (HDT) de 110 °C y resiste los rayos UV a largo plazo. Se imprime a 270-290 °C con cama a 100-120 °C, en impresora cerrada y con adhesivo en la cama.\u003c\/p\u003e\n\u003ch3\u003eDatos clave de un vistazo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e policarbonato (PC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de boquilla:\u003c\/strong\u003e 270-290 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de cama:\u003c\/strong\u003e 100-120 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDT (0,45 MPa):\u003c\/strong\u003e 110 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpresora cerrada:\u003c\/strong\u003e necesaria\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecado previo:\u003c\/strong\u003e obligatorio, 80 °C durante 8-12 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoquilla:\u003c\/strong\u003e cualquier tipo, desde 0,2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColores:\u003c\/strong\u003e negro, blanco y blanco translúcido\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¿Necesito impresora cerrada?\u003c\/h3\u003e\n\u003cp\u003eSí. Anycubic indica que el PC requiere impresión en cerramiento, además de pegamento en la cama. En su web lo señala como compatible con la serie Kobra S1 dentro de su gama. Con las altas temperaturas de cama (100-120 °C) y de boquilla (270-290 °C), asegúrate de que tu impresora alcanza esos valores antes de comprarlo.\u003c\/p\u003e\n\u003ch3\u003e¿Cuánto calor y cuántos golpes aguanta?\u003c\/h3\u003e\n\u003cp\u003eSegún Anycubic, su HDT de 110 °C le da gran estabilidad térmica, de modo que piezas como carcasas de lámparas o accesorios de exterior resisten la deformación y las grietas bajo calor prolongado. El fabricante destaca también su tenacidad frente a impactos, con una resistencia a flexión de 105 MPa y a tracción de 65 MPa, y lo recomienda para engranajes de robótica, componentes de dron y equipamiento de exterior.\u003c\/p\u003e\n\u003ch3\u003e¿Sirve para exterior y para piezas que dejan pasar la luz?\u003c\/h3\u003e\n\u003cp\u003eSí. Anycubic afirma que ofrece resistencia UV a largo plazo, conservando color e integridad estructural y evitando el amarilleo y el agrietamiento en piezas como componentes de automoción o herramientas de jardín. Además tiene superficie lisa y cierta transparencia, por lo que sirve para pantallas de lámpara y difusores que trabajan con calor.\u003c\/p\u003e\n\u003ch3\u003eEspecificaciones técnicas\u003c\/h3\u003e\n\u003cp\u003eDatos del fabricante (Anycubic).\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCaracterística\u003c\/th\u003e\n\u003cth\u003eValor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de boquilla\u003c\/td\u003e\n\u003ctd\u003e270-290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de cama\u003c\/td\u003e\n\u003ctd\u003e100-120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocidad recomendada\u003c\/td\u003e\n\u003ctd\u003e40-250 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoquilla recomendada\u003c\/td\u003e\n\u003ctd\u003eCualquier tipo, ≥ 0,2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpresión en cerramiento\u003c\/td\u003e\n\u003ctd\u003eNecesaria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesivo en la cama\u003c\/td\u003e\n\u003ctd\u003eNecesario\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecado\u003c\/td\u003e\n\u003ctd\u003e80 °C, 8-12 h (obligatorio)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensidad\u003c\/td\u003e\n\u003ctd\u003e1,2 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de reblandecimiento Vicat\u003c\/td\u003e\n\u003ctd\u003e122 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de flexión bajo carga (0,45 MPa)\u003c\/td\u003e\n\u003ctd\u003e110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a tracción (X-Y)\u003c\/td\u003e\n\u003ctd\u003e65 ± 6 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a flexión\u003c\/td\u003e\n\u003ctd\u003e105 ± 10 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de flexión\u003c\/td\u003e\n\u003ctd\u003e2900 ± 150 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlargamiento a la rotura\u003c\/td\u003e\n\u003ctd\u003e9 ± 4 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eConsejos de impresión\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeca la bobina a 80 °C durante 8-12 h antes de cada uso: Anycubic lo marca como obligatorio.\u003c\/li\u003e\n\u003cli\u003eAplica pegamento en la cama y ciérrala en un cerramiento para mantener la temperatura estable.\u003c\/li\u003e\n\u003cli\u003eComprueba que tu hotend llega con holgura a 290 °C y tu cama a 120 °C.\u003c\/li\u003e\n\u003cli\u003eEmpieza con velocidades moderadas y súbelas poco a poco, sin superar los 250 mm\/s que marca Anycubic.\u003c\/li\u003e\n\u003cli\u003eGuarda el filamento en un recipiente estanco entre impresiones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSi buscas un material más sencillo, revisa nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresión 3D\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreguntas frecuentes sobre el Anycubic PC\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura necesita el PC?\u003c\/strong\u003e\u003cbr\u003eSegún Anycubic, 270-290 °C en boquilla y 100-120 °C en la cama.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito impresora cerrada?\u003c\/strong\u003e\u003cbr\u003eSí, Anycubic indica que el cerramiento es necesario.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito pegamento en la cama?\u003c\/strong\u003e\u003cbr\u003eSí, el fabricante lo marca como necesario.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Cómo se seca?\u003c\/strong\u003e\u003cbr\u003eA 80 °C durante 8-12 horas; es obligatorio según Anycubic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito boquilla endurecida?\u003c\/strong\u003e\u003cbr\u003eNo, Anycubic indica que funciona con boquillas estándar de 0,2 mm o más.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura aguantan las piezas?\u003c\/strong\u003e\u003cbr\u003eAnycubic indica una HDT de 110 °C (0,45 MPa) y un Vicat de 122 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Amarillea al sol?\u003c\/strong\u003e\u003cbr\u003eSegún Anycubic, su resistencia UV a largo plazo evita el amarilleo, las grietas y el envejecimiento.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es transparente?\u003c\/strong\u003e\u003cbr\u003eTiene cierta transparencia y superficie lisa, por lo que Anycubic lo recomienda para pantallas de lámpara y piezas que deban dejar pasar algo de luz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Para qué piezas se recomienda?\u003c\/strong\u003e\u003cbr\u003eEngranajes de robótica, componentes de dron, equipamiento y accesorios de exterior y carcasas de lámparas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es compatible con ACE Pro?\u003c\/strong\u003e\u003cbr\u003eSí, incluye chip de identificación inteligente compatible con ACE Pro.\u003c\/p\u003e\n\n\u003c!-- mr-enlaces-filamento --\u003e\u003cp\u003e¿Buscas otro color o material? Mira toda nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003efilamentos técnicos\u003c\/a\u003e o todos los \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresora 3D\u003c\/a\u003e.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Black V1","offer_id":55197631119697,"sku":"HPCBK-101","price":29.99,"currency_code":"EUR","in_stock":true},{"title":"White V1","offer_id":55197631545681,"sku":"HPCWH-101","price":29.99,"currency_code":"EUR","in_stock":true},{"title":"Blanco translúcido","offer_id":55197631578449,"sku":"HPCTW-101","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-pc-negro.jpg?v=1791302639"},{"product_id":"anycubic-pet-cf","title":"Anycubic PET-CF - Filamento PET fibra de carbono 1,75 mm 0,5 kg","description":"\u003ch2\u003eAnycubic PET-CF: rigidez y resistencia al calor con baja absorción de humedad (0,5 kg, 1,75 mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEn resumen:\u003c\/strong\u003e el Anycubic PET-CF es un filamento de ingeniería de PET reforzado con un 10 % de fibra de carbono. Según Anycubic, supera al ABS común en resistencia, rigidez y temperatura, apenas absorbe humedad (menos del 0,3 % en peso tras 24 h sumergido) y tiende poco a deformarse. Alcanza una HDT de 188 °C (0,45 MPa) y deja un acabado negro mate con textura de carbono. Necesita boquilla de acero endurecido.\u003c\/p\u003e\n\u003ch3\u003eDatos clave de un vistazo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PET reforzado con un 10 % de fibra de carbono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de boquilla:\u003c\/strong\u003e 260-290 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de cama:\u003c\/strong\u003e 80-100 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDT (0,45 MPa):\u003c\/strong\u003e 188 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoquilla:\u003c\/strong\u003e acero endurecido, de 0,4 mm o más\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorción de humedad:\u003c\/strong\u003e menos del 0,3 % en peso tras 24 h sumergido\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eACE Pro \/ ACE 2 Pro:\u003c\/strong\u003e no recomendado\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e negro (#212322), acabado mate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¿Necesito boquilla endurecida?\u003c\/h3\u003e\n\u003cp\u003eSí. Anycubic especifica boquilla de acero endurecido con un diámetro recomendado de 0,4 mm o superior. El refuerzo de fibra de carbono es lo que le da su rigidez, y el fabricante lo declara compatible con toda su gama de impresoras.\u003c\/p\u003e\n\u003ch3\u003e¿Qué ventaja tiene frente al PETG o al ABS?\u003c\/h3\u003e\n\u003cp\u003eSegún Anycubic, frente al PETG ofrece aproximadamente un 40-60 % más de rigidez (módulo) y una resistencia al calor muy superior; frente al ABS, mejor adhesión entre capas, mucho menos warping y una resistencia a tracción comparable o mejor. El fabricante lo sitúa entre los plásticos de ingeniería estándar y los materiales de gama alta tipo PPA\/PAHT. Con un módulo de Young de 8700 MPa y una resistencia a flexión de 188 MPa, está pensado para piezas funcionales sometidas a carga continua.\u003c\/p\u003e\n\u003ch3\u003e¿Para qué tipo de piezas está pensado?\u003c\/h3\u003e\n\u003cp\u003eAnycubic lo recomienda para accesorios de automoción, carcasas de electrónica y prototipos funcionales que deben mantener su forma en entornos calientes. Gracias a su baja tendencia al warping, el fabricante lo propone también para piezas grandes. La fibra de carbono disimula las líneas de capa y deja un acabado mate de aspecto inyectado, sin apenas posprocesado.\u003c\/p\u003e\n\u003ch3\u003eEspecificaciones técnicas\u003c\/h3\u003e\n\u003cp\u003eDatos del fabricante (Anycubic).\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCaracterística\u003c\/th\u003e\n\u003cth\u003eValor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiámetro \/ peso\u003c\/td\u003e\n\u003ctd\u003e1,75 mm \/ 0,5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de boquilla\u003c\/td\u003e\n\u003ctd\u003e260-290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de cama\u003c\/td\u003e\n\u003ctd\u003e80-100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaudal volumétrico máximo\u003c\/td\u003e\n\u003ctd\u003e8 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensidad\u003c\/td\u003e\n\u003ctd\u003e1,3 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eÍndice de fluidez\u003c\/td\u003e\n\u003ctd\u003e24 ± 2 g\/10 min (270 °C \/ 1,2 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de reblandecimiento Vicat\u003c\/td\u003e\n\u003ctd\u003e231 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT (0,45 MPa)\u003c\/td\u003e\n\u003ctd\u003e188 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de Young (X-Y)\u003c\/td\u003e\n\u003ctd\u003e8700 ± 150 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a tracción (X-Y \/ Z)\u003c\/td\u003e\n\u003ctd\u003e115 ± 3 MPa \/ 28 ± 2 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlargamiento a la rotura\u003c\/td\u003e\n\u003ctd\u003e5 ± 2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo \/ resistencia a flexión\u003c\/td\u003e\n\u003ctd\u003e8300 ± 150 MPa \/ 188 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia al impacto Izod (X-Y)\u003c\/td\u003e\n\u003ctd\u003e35 ± 3 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSegún la ficha técnica, los valores mecánicos y térmicos se obtienen con probetas impresas y recocidas a 100 °C durante 8 horas.\u003c\/p\u003e\n\u003ch3\u003eConsejos de impresión\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUsa boquilla de acero endurecido de 0,4 mm o más.\u003c\/li\u003e\n\u003cli\u003eAnycubic recomienda secarlo antes de usarlo: 80 °C en secador de convección durante 8-12 h, o en la cama de la impresora a 90-100 °C unas 12 h, dando la vuelta a la bobina a mitad. No superes los 100 °C para no deformar el carrete.\u003c\/li\u003e\n\u003cli\u003eSe recomienda aplicar adhesivo en la cama.\u003c\/li\u003e\n\u003cli\u003eNo lo cargues en el ACE Pro \/ ACE 2 Pro: el filamento puede romperse dentro de la unidad.\u003c\/li\u003e\n\u003cli\u003ePara ganar resistencia y rigidez, puedes recocer la pieza en horno de convección a 80-100 °C durante 6-12 h; algunos modelos pueden deformarse.\u003c\/li\u003e\n\u003cli\u003ePara secar o recocer, usa un horno de convección con temperatura uniforme, nunca microondas ni horno de cocina.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDescubre otros materiales técnicos en nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresión 3D\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreguntas frecuentes sobre el Anycubic PET-CF\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura necesita el PET-CF?\u003c\/strong\u003e\u003cbr\u003eSegún Anycubic, 260-290 °C en boquilla y 80-100 °C en la cama.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito boquilla de acero endurecido?\u003c\/strong\u003e\u003cbr\u003eSí, de acero endurecido y de 0,4 mm o más.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Cuánta humedad absorbe?\u003c\/strong\u003e\u003cbr\u003eMuy poca: menos del 0,3 % en peso tras 24 horas sumergido, según el fabricante.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Hay que secarlo antes de imprimir?\u003c\/strong\u003e\u003cbr\u003eAnycubic lo recomienda para obtener el mejor resultado: 80 °C en secador de convección durante 8-12 h.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura soportan las piezas?\u003c\/strong\u003e\u003cbr\u003eAnycubic indica una HDT de 188 °C (0,45 MPa) y un Vicat de 231 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es más resistente que el ABS?\u003c\/strong\u003e\u003cbr\u003eSí, según Anycubic supera al ABS común en resistencia, rigidez y resistencia al calor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es compatible con el ACE Pro?\u003c\/strong\u003e\u003cbr\u003eNo. Anycubic no lo recomienda con ACE Pro ni ACE 2 Pro porque el filamento puede romperse dentro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Se notan las líneas de capa?\u003c\/strong\u003e\u003cbr\u003ePoco. La fibra de carbono las disimula y deja un acabado negro mate uniforme.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Puedo mejorar sus propiedades tras imprimir?\u003c\/strong\u003e\u003cbr\u003eSí, recociendo la pieza a 80-100 °C durante 6-12 h, aunque algunas piezas pueden deformarse.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué formato y color tiene?\u003c\/strong\u003e\u003cbr\u003eBobina de 0,5 kg de 1,75 mm en color negro.\u003c\/p\u003e\n\n\u003c!-- mr-enlaces-filamento --\u003e\u003cp\u003e¿Buscas otro color o material? Mira toda nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003efilamentos técnicos\u003c\/a\u003e o todos los \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresora 3D\u003c\/a\u003e.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":55197742039377,"sku":"HEFBK-051","price":37.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-pet-cf-negro.jpg?v=1791303421"},{"product_id":"anycubic-pa6-cf","title":"Anycubic PA6-CF - Filamento nylon fibra de carbono 1,75 mm 0,5 kg","description":"\u003ch2\u003eAnycubic PA6-CF: nylon con fibra de carbono para piezas industriales (0,5 kg, 1,75 mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEn resumen:\u003c\/strong\u003e el Anycubic PA6-CF es un compuesto profesional de nylon PA6 reforzado con un 20 % de fibra de carbono. Según Anycubic, combina alta resistencia y rigidez con tenacidad frente a impactos, alcanza una HDT de 215 °C (0,45 MPa), resiste el desgaste y apenas se deforma al imprimir. Requiere boquilla de acero endurecido, impresora cerrada, adhesivo en la cama y secado previo obligatorio.\u003c\/p\u003e\n\u003ch3\u003eDatos clave de un vistazo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e nylon PA6 con un 20 % de fibra de carbono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de boquilla:\u003c\/strong\u003e 260-300 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de cama:\u003c\/strong\u003e 40-110 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDT (0,45 MPa):\u003c\/strong\u003e 215 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoquilla:\u003c\/strong\u003e acero endurecido, de 0,4 mm o más\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpresora cerrada:\u003c\/strong\u003e obligatoria\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecado previo:\u003c\/strong\u003e obligatorio, 90-100 °C durante 8-12 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e negro (#212322), acabado mate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¿Necesito impresora cerrada y boquilla endurecida?\u003c\/h3\u003e\n\u003cp\u003eSí a ambas. Anycubic indica que el PA6-CF debe imprimirse en una cámara totalmente cerrada y que no es adecuado para impresoras abiertas de cama móvil. Dentro de su gama lo declara compatible con la serie S1. La boquilla debe ser de acero endurecido, de 0,4 mm o más, y el fabricante exige adhesivo en la cama. No es compatible con el ACE Pro.\u003c\/p\u003e\n\u003ch3\u003e¿Cómo le afecta la humedad?\u003c\/h3\u003e\n\u003cp\u003eMucho, y es la clave de este material. Según Anycubic, el PA6-CF es muy sensible a la humedad del aire y sigue absorbiéndola después de impresa la pieza. En seco ofrece la máxima rigidez y resistencia (módulo de Young de 8700 MPa y 112 MPa a tracción); con humedad pierde rigidez y resistencia, pero gana mucha tenacidad: el impacto Izod pasa de 26 a 75 kJ\/m². Para frenarlo, el fabricante sugiere recubrir la pieza con pintura o cera.\u003c\/p\u003e\n\u003ch3\u003e¿Para qué piezas lo recomienda Anycubic?\u003c\/h3\u003e\n\u003cp\u003eComponentes de automoción (piezas del vano motor, soportes), engranajes, cojinetes y soportes estructurales, utillajes y plantillas de precisión, chasis y suspensiones de RC, cuadros de dron, piezas de bicicleta y cubiertas de motor. Según Anycubic, ofrece buena resistencia UV y rinde mejor en entornos secos.\u003c\/p\u003e\n\u003ch3\u003eEspecificaciones técnicas\u003c\/h3\u003e\n\u003cp\u003eDatos del fabricante (Anycubic).\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCaracterística\u003c\/th\u003e\n\u003cth\u003eValor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiámetro \/ peso\u003c\/td\u003e\n\u003ctd\u003e1,75 mm \/ 0,5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de boquilla\u003c\/td\u003e\n\u003ctd\u003e260-300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de cama\u003c\/td\u003e\n\u003ctd\u003e40-110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocidad recomendada\u003c\/td\u003e\n\u003ctd\u003e50-100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensidad\u003c\/td\u003e\n\u003ctd\u003e1,17 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eÍndice de fluidez\u003c\/td\u003e\n\u003ctd\u003e6,7 ± 0,5 g\/10 min (280 °C \/ 2,16 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de reblandecimiento Vicat\u003c\/td\u003e\n\u003ctd\u003e220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT (0,45 MPa)\u003c\/td\u003e\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de Young (X-Y)\u003c\/td\u003e\n\u003ctd\u003eSeco: 8700 ± 300 MPa; húmedo: 2600 ± 100 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a tracción (X-Y)\u003c\/td\u003e\n\u003ctd\u003eSeco: 112 ± 5 MPa; húmedo: 56 ± 2 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a tracción (Z)\u003c\/td\u003e\n\u003ctd\u003eSeco: 57 ± 4 MPa; húmedo: 26 ± 1,5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlargamiento a la rotura\u003c\/td\u003e\n\u003ctd\u003eSeco: 3 ± 0,5 %; húmedo: 8 ± 0,8 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a flexión\u003c\/td\u003e\n\u003ctd\u003eSeco: 165 ± 5 MPa; húmedo: 68 ± 4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMódulo de flexión (seco)\u003c\/td\u003e\n\u003ctd\u003e7100 ± 200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia al impacto Izod (X-Y)\u003c\/td\u003e\n\u003ctd\u003eSeco: 26 ± 1,5 kJ\/m²; húmedo: 75 ± 2,5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSegún la ficha técnica, los ensayos se hacen con probetas impresas y recocidas a 100 °C durante 16 h; los valores \"húmedo\" corresponden a probetas sumergidas hasta saturar de agua.\u003c\/p\u003e\n\u003ch3\u003eConsejos de impresión\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSécalo siempre antes de imprimir: 90-100 °C en secador de aire forzado durante 8-12 h, o en la cama a 90-100 °C unas 12 h dando la vuelta a la bobina a mitad. No superes los 100 °C.\u003c\/li\u003e\n\u003cli\u003eMantenlo seco durante la impresión y el almacenaje: caja seca, bolsa de aluminio sellada u otro recipiente hermético.\u003c\/li\u003e\n\u003cli\u003eRetira los soportes en las 2 horas siguientes a terminar; si la pieza ya ha absorbido humedad, vuelve a secarla antes de quitarlos.\u003c\/li\u003e\n\u003cli\u003eRecocer la pieza a 80-120 °C durante 6-16 h mejora notablemente su resistencia y rigidez; algunos modelos pueden deformarse.\u003c\/li\u003e\n\u003cli\u003ePara secar o recocer, usa un horno de convección forzada con temperatura uniforme, nunca microondas ni horno de cocina.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMás materiales en nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresión 3D\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreguntas frecuentes sobre el Anycubic PA6-CF\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura necesita el PA6-CF?\u003c\/strong\u003e\u003cbr\u003eSegún Anycubic, 260-300 °C en boquilla y 40-110 °C en la cama.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito impresora cerrada?\u003c\/strong\u003e\u003cbr\u003eSí, totalmente cerrada. No es apto para impresoras abiertas de cama móvil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito boquilla de acero endurecido?\u003c\/strong\u003e\u003cbr\u003eSí, de 0,4 mm o más.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es obligatorio secarlo?\u003c\/strong\u003e\u003cbr\u003eSí: 90-100 °C durante 8-12 h, y mantenerlo seco al imprimir y al guardarlo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Las piezas absorben humedad después de impresas?\u003c\/strong\u003e\u003cbr\u003eSí. Pierden rigidez y resistencia, pero ganan tenacidad e impacto.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura soportan las piezas?\u003c\/strong\u003e\u003cbr\u003eAnycubic indica una HDT de 215 °C (0,45 MPa) y un Vicat de 220 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Sirve para exterior?\u003c\/strong\u003e\u003cbr\u003eSí, según Anycubic tiene buena resistencia UV; la humedad afectará a sus propiedades con el tiempo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesita adhesivo en la cama?\u003c\/strong\u003e\u003cbr\u003eSí, Anycubic lo marca como obligatorio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es compatible con el ACE Pro?\u003c\/strong\u003e\u003cbr\u003eNo, Anycubic lo indica como no compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué formato y color tiene?\u003c\/strong\u003e\u003cbr\u003eBobina de 0,5 kg de 1,75 mm en color negro con acabado mate.\u003c\/p\u003e\n\n\u003c!-- mr-enlaces-filamento --\u003e\u003cp\u003e¿Buscas otro color o material? Mira toda nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003efilamentos técnicos\u003c\/a\u003e o todos los \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresora 3D\u003c\/a\u003e.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":55197743481169,"sku":"HAFBK-051","price":36.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-pa6-cf-negro.jpg?v=1791303433"},{"product_id":"anycubic-pva","title":"Anycubic PVA - Filamento soporte soluble en agua 1,75 mm 0,5 kg","description":"\u003ch2\u003eAnycubic PVA: soporte soluble en agua para geometrías complejas (0,5 kg, 1,75 mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEn resumen:\u003c\/strong\u003e el Anycubic PVA es un material de soporte soluble en agua pensado para diseños intrincados, voladizos pronunciados, cavidades profundas y geometrías internas. Según Anycubic, se disuelve en agua del grifo sin productos químicos, se adhiere con fuerza a PLA y nylon, y funciona también con PETG, ABS, TPU y CPE. Se imprime a 220-240 °C, incluye chip de identificación y es compatible con el ACE Pro.\u003c\/p\u003e\n\u003ch3\u003eDatos clave de un vistazo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVA soluble en agua (material de soporte)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de boquilla:\u003c\/strong\u003e 220-240 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperatura de cama:\u003c\/strong\u003e 35-65 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVelocidad recomendada:\u003c\/strong\u003e menos de 200 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoquilla:\u003c\/strong\u003e cualquier tipo, de 0,4 mm o más\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpresora cerrada:\u003c\/strong\u003e no necesaria\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecado previo:\u003c\/strong\u003e obligatorio, 75-85 °C durante 8-12 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e natural (#EFF4A4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e¿Con qué materiales sirve de soporte?\u003c\/h3\u003e\n\u003cp\u003eAnycubic indica que su PVA se adhiere con fuerza al PLA y al nylon, y que también funciona bien con ABS, PETG, CPE, TPU y muchos otros filamentos habituales. Lo describe como material de soporte para impresión con dos materiales: tú imprimes la pieza en tu filamento principal y el PVA rellena los voladizos y huecos que después eliminas con agua.\u003c\/p\u003e\n\u003ch3\u003e¿Cómo se disuelve el soporte?\u003c\/h3\u003e\n\u003cp\u003eSumerge la pieza en agua del grifo; no hacen falta productos químicos. Según Anycubic, cuanto más caliente esté el agua y mayor sea su volumen, más rápida y completa es la disolución, aunque el agua fría también funciona. Si la pieza es de PLA, el agua no debe superar los 50 °C para que no se deforme. No hace falta esperar a la disolución completa: puedes retirar el soporte cuando esté parcialmente disuelto y ahorrar tiempo.\u003c\/p\u003e\n\u003ch3\u003e¿Cómo lo configuro en el laminador?\u003c\/h3\u003e\n\u003cp\u003eAnycubic contempla dos formas de usarlo: como soporte completo más interfaz, o solo como interfaz de soporte. Si lo usas como cuerpo del soporte, no recomienda los soportes en árbol porque tienden a colapsar. Su chip integrado permite identificar el filamento y cargar los parámetros automáticamente en impresoras Anycubic (requiere conexión a internet).\u003c\/p\u003e\n\u003ch3\u003e¿Por qué hay que protegerlo de la humedad?\u003c\/h3\u003e\n\u003cp\u003ePorque el PVA es muy higroscópico. Por eso llega envasado al vacío en bolsa de aluminio de alta barrera con sello antihumedad. Si absorbe humedad se vuelve blando y pegajoso y puede provocar fallos de alimentación, atascos y mala calidad. Que cambie de color tras un almacenaje largo o varios ciclos de secado es normal y, según Anycubic, no afecta a la impresión.\u003c\/p\u003e\n\u003ch3\u003eEspecificaciones técnicas\u003c\/h3\u003e\n\u003cp\u003eDatos del fabricante (Anycubic).\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCaracterística\u003c\/th\u003e\n\u003cth\u003eValor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiámetro \/ peso\u003c\/td\u003e\n\u003ctd\u003e1,75 mm \/ 0,5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de boquilla\u003c\/td\u003e\n\u003ctd\u003e220-240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperatura de cama\u003c\/td\u003e\n\u003ctd\u003e35-65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocidad recomendada\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoquilla\u003c\/td\u003e\n\u003ctd\u003eCualquier tipo, ≥ 0,4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecado\u003c\/td\u003e\n\u003ctd\u003e75-85 °C, 8-12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesivo en cama\u003c\/td\u003e\n\u003ctd\u003eRecomendado\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensidad\u003c\/td\u003e\n\u003ctd\u003e1,25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eÍndice de fluidez\u003c\/td\u003e\n\u003ctd\u003e7,5 ± 1 g\/10 min (210 °C \/ 2,16 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorción de agua a saturación\u003c\/td\u003e\n\u003ctd\u003e6,15 ± 0,1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistencia a tracción (Z)\u003c\/td\u003e\n\u003ctd\u003e14 ± 0,5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eConsejos de impresión\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAl abrirlo por primera vez, Anycubic recomienda usarlo con el ACE 2 Pro para secar e imprimir a la vez; si no lo tienes, imprímelo desde una caja seca o bolsa de aluminio sellada.\u003c\/li\u003e\n\u003cli\u003eTras usarlo, guárdalo en un recipiente hermético y sécalo bien antes de la siguiente impresión: 80 °C en secador de aire forzado durante 8-12 h, o en la cama a 90-100 °C unas 12 h dando la vuelta a la bobina a mitad. No superes los 100 °C.\u003c\/li\u003e\n\u003cli\u003eSi se vuelve blando y pegajoso, vuelve a secarlo antes de usarlo.\u003c\/li\u003e\n\u003cli\u003eSeca siempre en horno de convección con temperatura uniforme, nunca en microondas ni horno de cocina.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCombínalo con el filamento principal que elijas de nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresión 3D\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreguntas frecuentes sobre el Anycubic PVA\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e¿Para qué sirve el PVA?\u003c\/strong\u003e\u003cbr\u003ePara imprimir soportes que se eliminan disolviéndolos en agua, sin retirarlos a mano.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito productos químicos para disolverlo?\u003c\/strong\u003e\u003cbr\u003eNo, basta con agua del grifo. El agua templada acelera el proceso.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Puedo usar agua caliente con piezas de PLA?\u003c\/strong\u003e\u003cbr\u003eSí, pero sin superar los 50 °C para no deformar la pieza.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Con qué filamentos es compatible?\u003c\/strong\u003e\u003cbr\u003eSegún Anycubic, PLA, nylon, ABS, PETG, CPE y TPU, entre otros.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué temperatura necesita?\u003c\/strong\u003e\u003cbr\u003e220-240 °C en boquilla y 35-65 °C en la cama.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es compatible con el ACE Pro?\u003c\/strong\u003e\u003cbr\u003eSí, en estado seco; Anycubic recomienda el ACE 2 Pro para secar mientras imprimes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Necesito impresora cerrada o boquilla especial?\u003c\/strong\u003e\u003cbr\u003eNo. Sirve cualquier boquilla de 0,4 mm o más.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Puedo usar soportes en árbol?\u003c\/strong\u003e\u003cbr\u003eSi el PVA forma el cuerpo del soporte, Anycubic no los recomienda porque pueden colapsar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Es normal que cambie de color?\u003c\/strong\u003e\u003cbr\u003eSí, tras almacenajes largos o varios secados; no afecta al resultado.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e¿Qué formato tiene?\u003c\/strong\u003e\u003cbr\u003eBobina de 0,5 kg de 1,75 mm en color natural.\u003c\/p\u003e\n\n\u003c!-- mr-enlaces-filamento --\u003e\u003cp\u003e¿Buscas otro color o material? Mira toda nuestra colección de \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003efilamentos técnicos\u003c\/a\u003e o todos los \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003efilamentos para impresora 3D\u003c\/a\u003e.\u003c\/p\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":55197746889041,"sku":"HPVNA-051","price":35.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/anycubic-pva-natural.jpg?v=1791303444"},{"product_id":"3dxtech-carbonx-abs-cf-filamento","title":"3DXTech CarbonX ABS+CF - Carbon Fiber ABS Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech CarbonX ABS+CF: Carbon Fiber ABS Filament for Rigid Parts (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eCarbonX ABS+CF is a premium ABS filament reinforced with 10% high-modulus carbon fiber, manufactured in the USA by 3DXTech. The carbon fiber dramatically increases stiffness: the TDS lists a tensile modulus of 5,210 MPa. This is my go-to filament for brackets, tooling fixtures, and structural parts that need to hold their shape without flexing. Available in black, 750 g, 1.75 mm. Requires a heated bed at 100–110 °C, an enclosed printer, and a hardened steel nozzle.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eABS with 10% high-modulus carbon fiber reinforcement.\u003c\/li\u003e\n\u003cli\u003eTensile modulus of 5,210 MPa and flexural modulus of 5,260 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eAcetone vapor smoothing compatible, according to 3DXTech.\u003c\/li\u003e\n\u003cli\u003eEasier to print than most industrial-grade materials.\u003c\/li\u003e\n\u003cli\u003eNozzle temp: 220–240 °C | Bed temp: 100–110 °C | Enclosed chamber recommended.\u003c\/li\u003e\n\u003cli\u003eMinimum 0.4 mm hardened steel nozzle and 0.25 mm layer height or above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eIf you're already printing ABS in an enclosed printer, most likely yes. The main thing to check is your nozzle: 3DXTech requires a minimum 0.4 mm hardened steel nozzle. Carbon fiber will wear through a brass nozzle quickly. A heated chamber is also recommended, along with a bed temperature of 100–110 °C. In an open-frame printer, limit yourself to small parts only.\u003c\/p\u003e\n\u003ch3\u003eWhat Does Carbon Fiber ABS Offer Over Standard ABS?\u003c\/h3\u003e\n\u003cp\u003eGreater stiffness and better dimensional stability. The trade-off is reduced elongation: the TDS lists just 2% at break, meaning parts will snap rather than bend. If you need toughness or impact resistance, standard unfilled ABS or nylon is a better choice. For a deeper dive, check out our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-con-fibra-de-carbono-guia-completa\"\u003ecomplete carbon fiber filament guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS + 10% carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e220–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e100–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened steel, 0.4 mm minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.25 mm or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e80 °C for 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.11 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e46 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e5,210 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e76 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e5,260 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e105 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e76 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistivity\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10⁹ Ω\/sq\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse a hardened steel nozzle, 0.4 mm or larger. 3DXTech is clear on this requirement.\u003c\/li\u003e\n\u003cli\u003eSet layer height to 0.25 mm or above. TDS test specimens were printed at 230 °C, 110 °C bed, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eDry for 4 hours at 80 °C before printing if the spool has been exposed to air. We carry \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e that will get the job done.\u003c\/li\u003e\n\u003cli\u003eKeep the printer enclosed and reduce part cooling fan speed to prevent layer delamination.\u003c\/li\u003e\n\u003cli\u003eIf acetone vapor smoothing, use a sealed container and work in a well-ventilated area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 750 g spool, black. SKU ABS03CF200750BK00 as listed on 3dxtech.com (the '2' in the SKU does not indicate 2.85 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much carbon fiber does it contain?\u003c\/strong\u003e\u003cbr\u003e10% high-modulus carbon fiber by weight, per 3DXTech.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eYes. 3DXTech recommends a minimum 0.4 mm hardened steel nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a heated enclosure?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one. A closed printer typically works well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eHDT of 76 °C at 0.45 MPa and a Tg of 105 °C per the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be smoothed with acetone?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech states it is compatible with acetone vapor smoothing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it conductive or ESD-safe?\u003c\/strong\u003e\u003cbr\u003eNo. The TDS lists a surface resistance of over 10⁹ Ω\/sq.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it so stiff yet brittle?\u003c\/strong\u003e\u003cbr\u003eThe fiber reinforcement raises the modulus to 5,210 MPa but limits elongation at break to 2%, per the TDS.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213580517713,"sku":"ABS03CF200750BK00","price":56.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-carbonx-abs-cf-filamento-1.jpg?v=1791386711"},{"product_id":"3dxtech-carbonx-ezpc-cf-filamento","title":"3DXTech CarbonX ezPC+CF - Carbon Fiber PC Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech CarbonX ezPC+CF: Carbon Fiber Polycarbonate That Actually Prints (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eCarbonX ezPC+CF is 3DXTech's carbon fiber polycarbonate filament — and the \"ez\" part is real. The manufacturer specs it at 260–280 °C, a print temperature range that almost any all-metal hotend desktop printer can hit. Performance-wise, it outclasses ABS+CF across the board: heat deflection temperature of 119 °C, Tg of 127 °C, and a tensile modulus of nearly 7,000 MPa. Available in black, 750 g, 1.75 mm. You'll need a hardened nozzle and, ideally, an enclosed printer.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber reinforced polycarbonate filament.\u003c\/li\u003e\n\u003cli\u003eTg of 127 °C and HDT of 119 °C at 0.45 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eTensile modulus of 6,980 MPa and tensile strength of 73 MPa.\u003c\/li\u003e\n\u003cli\u003eAmorphous structure with low, near-isotropic shrinkage, according to 3DXTech.\u003c\/li\u003e\n\u003cli\u003eNozzle temp 260–280 °C, bed temp 80–100 °C, enclosed chamber recommended.\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle, 0.4 mm minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eIf your printer has an all-metal hotend that reaches 280 °C, a bed that hits 100 °C, and a hardened steel nozzle, you're good to go. 3DXTech designed the 260–280 °C window to work with most desktop printers, and recommends a heated enclosure. For medium to large parts, an enclosed printer is pretty much mandatory. If your hotend has a PTFE liner that reaches the nozzle, or you're running a brass nozzle, hold off for now.\u003c\/p\u003e\n\u003ch3\u003eezPC+CF vs. ABS+CF: Which Should You Choose?\u003c\/h3\u003e\n\u003cp\u003eAccording to 3DXTech's TDS data, ezPC+CF wins almost everywhere: HDT of 119 °C vs. 76 °C, tensile strength of 73 MPa vs. 46 MPa, and tensile modulus of 6,980 MPa vs. 5,210 MPa. ABS+CF is somewhat easier to print and can be smoothed with acetone. For functional parts that need to handle heat, ezPC+CF is the clear choice. For a deeper dive, check out our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-con-fibra-de-carbono-guia-completa\"\u003ecomplete carbon fiber filament guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate (ezPC) + carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e260–280 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e80–100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened steel, 0.4 mm minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.25 mm or greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e80 °C, 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.36 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e73 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e6,980 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e2.1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e85 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e6,540 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e127 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e119 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10⁹ Ω\/sq\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTDS test specimens were printed at 275 °C, bed at 95 °C, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eUse a hardened steel nozzle, as recommended by 3DXTech.\u003c\/li\u003e\n\u003cli\u003ePolycarbonate absorbs moisture readily — dry it for 4 hours at 80 °C before printing. Our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e can reach that temperature.\u003c\/li\u003e\n\u003cli\u003ePrint in an enclosure and keep part cooling fan speed low to prevent layer delamination.\u003c\/li\u003e\n\u003cli\u003eUse a layer height of 0.25 mm or greater, as specified by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 750 g spool, black. SKU PC006CF100750BK00, verified on 3dxtech.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it called ezPC?\u003c\/strong\u003e\u003cbr\u003eBecause 3DXTech formulated it to print at 260–280 °C — significantly easier than standard polycarbonate and compatible with most desktop FDM printers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech strongly recommends one, 0.4 mm minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a heated chamber?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one. At a minimum, use an enclosed printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it handle?\u003c\/strong\u003e\u003cbr\u003eHDT of 119 °C at 0.45 MPa and Tg of 127 °C per the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it smell when printing?\u003c\/strong\u003e\u003cbr\u003eVery little, according to 3DXTech.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it conductive or ESD-safe?\u003c\/strong\u003e\u003cbr\u003eNo. The TDS lists surface resistivity above 10⁹ Ω\/sq.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it brittle?\u003c\/strong\u003e\u003cbr\u003eIt is very rigid, with an elongation at break of 2.1% per the TDS. For parts that need to flex, a non-filled material is a better choice.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213580747089,"sku":"PC006CF100750BK00","price":104.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-carbonx-ezpc-cf-filamento-1.jpg?v=1791386713"},{"product_id":"3dxtech-carbonx-pla-cf-filamento","title":"3DXTech CarbonX PLA+CF - Carbon Fiber PLA Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech CarbonX PLA+CF: Carbon Fiber PLA for Rigid Prototypes (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eCarbonX PLA+CF is the most beginner-friendly filament in the CarbonX lineup. It's a NatureWorks PLA reinforced with carbon fiber that prints without a heated bed or enclosure, with very little odor — making it a great fit for home or office use. Low demands, high payoff: parts come out stiff with a clean surface finish, and the TDS lists a flexural modulus of 6,320 MPa. Available in black, 750 g, 1.75 mm. The only real requirement: a hardened nozzle.\u003c\/p\u003e\n\u003ch3\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNatureWorks PLA reinforced with carbon fiber.\u003c\/li\u003e\n\u003cli\u003eFlexural modulus 6,320 MPa and tensile modulus 4,950 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003ePrints without a heated bed or enclosure, very low odor.\u003c\/li\u003e\n\u003cli\u003eNozzle temp 190–220 °C, bed temp 23–60 °C.\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle, 0.4 mm minimum.\u003c\/li\u003e\n\u003cli\u003eCompatible with Bambu Lab AMS, per 3DXTech.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill my printer handle it?\u003c\/h3\u003e\n\u003cp\u003eAlmost certainly yes. Temperatures are standard PLA range and no enclosure is needed. The only real requirement is the nozzle: 3DXTech strongly recommends hardened steel instead of a soft metal, 0.4 mm minimum. If your printer has a brass nozzle, swap it out first — the carbon fiber will wear it down fast.\u003c\/p\u003e\n\u003ch3\u003eWhat is it good for — and what isn't it?\u003c\/h3\u003e\n\u003cp\u003e3DXTech positions this filament for prototypes and functional parts where looks, stiffness, and consistency matter. It works great for enclosures, functional mockups, camera mounts, and drone components. Don't leave it in a hot car or near heat sources: the Tg is 60 °C. If you need higher temperature resistance, check out the ABS+CF or ezPC+CF in \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePLA (NatureWorks) + carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e190–220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e23–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened steel, 0.4 mm minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.25 mm or greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e65 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.29 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e48 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e4,950 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e89 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e6,320 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e91 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistivity\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10⁹ Ω\/sq\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTDS test specimens were printed at 215 °C, bed at 23 °C, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eUse a layer height of 0.25 mm or greater, as 3DXTech recommends, to prevent fiber clogs at the nozzle.\u003c\/li\u003e\n\u003cli\u003eIf the spool has absorbed moisture, dry it for 4 hours at 65 °C. Any of our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e will do the job.\u003c\/li\u003e\n\u003cli\u003eExpect a matte, low-gloss surface finish — this is a technical filament, not a standard PLA.\u003c\/li\u003e\n\u003cli\u003eIf you're interested in carbon fiber filament in general, check out our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-con-fibra-de-carbono-guia-completa\"\u003ecomplete carbon fiber filament guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm, 750 g, black. SKU: PLA03CF100750BK00.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a heated bed?\u003c\/strong\u003e\u003cbr\u003eNo. 3DXTech specifies a bed temperature of 23–60 °C and specifically highlights that it prints without a heated bed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech strongly recommends one — 0.4 mm minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an enclosed printer?\u003c\/strong\u003e\u003cbr\u003eNo, an enclosure is not required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with the Bambu AMS?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech lists it as AMS compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it handle?\u003c\/strong\u003e\u003cbr\u003eAccording to the TDS, it has a Tg of 60 °C and an HDT of 91 °C at 0.45 MPa. For heat-resistant applications, choose a different material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it smell when printing?\u003c\/strong\u003e\u003cbr\u003eVery little, according to 3DXTech — it's designed for home and office use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it brittle?\u003c\/strong\u003e\u003cbr\u003eIt is rigid: the TDS lists elongation at break at 2%. Do not use it for parts that need to flex or bend.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213581107537,"sku":"PLA03CF100750BK00","price":53.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-carbonx-pla-cf-filamento-1.jpg?v=1791386716"},{"product_id":"3dxtech-firewire-fr-abs-filamento","title":"3DXTech Firewire FR-ABS - Flame Retardant ABS Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech Firewire FR-ABS: Flame Retardant ABS Filament with UL94 V-0 Base Resin (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eFirewire FR-ABS is 3DXTech's flame retardant ABS filament. It's built on a UL94 V-0 rated base resin and produces self-extinguishing parts designed for electrical enclosures, panels, and equipment where fire is a real hazard. It prints like standard ABS: nozzle at 220–240 °C, bed at 100–110 °C, and best results in an enclosed printer. Available in black, 750 g spool, 1.75 mm diameter. Note: the V-0 rating applies to the base resin, not your finished printed part.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant and self-extinguishing ABS.\u003c\/li\u003e\n\u003cli\u003eBase resin rated UL94 V-0 at 1.5 mm (per TDS).\u003c\/li\u003e\n\u003cli\u003eEasier to print than most industrial-grade materials, according to 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTensile strength of 45 MPa and HDT of 95 °C at 0.45 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eNozzle 220–240 °C, bed 100–110 °C, enclosed chamber recommended.\u003c\/li\u003e\n\u003cli\u003eNo special nozzle required. Dry at 80 °C for 4 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eIf you can print ABS, you can print this. You need a bed temperature of 100–110 °C and a nozzle temperature of 220–240 °C, and 3DXTech recommends a heated enclosure. A closed printer — even without active chamber heating — is usually enough for mid-sized parts. On an open-frame printer, larger prints are likely to warp and delaminate.\u003c\/p\u003e\n\u003ch3\u003eWhat Does UL94 V-0 Actually Mean Here?\u003c\/h3\u003e\n\u003cp\u003eUL94 V-0 is a vertical burn classification: the flame self-extinguishes quickly with no flaming drips. In 3DXTech's TDS, this rating is marked with an asterisk as a base resin property, tested at 1.5 mm thickness. Your printed part does not automatically inherit that certification — if you need to meet a specific standard, the finished part must be tested independently. Browse other engineering-grade options in our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFlame retardant ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e220–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e100–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e80 °C, 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.18 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e1990 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e80 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e2250 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e105 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability\u003c\/td\u003e\n\u003ctd\u003eUL94 V-0 at 1.5 mm (base resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTDS test specimens were printed at 235 °C, bed at 110 °C, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003ePrint in an enclosed printer with the part cooling fan set low.\u003c\/li\u003e\n\u003cli\u003eThe base resin rating was established at 1.5 mm wall thickness. Avoid designing walls thinner than that on fire-critical parts.\u003c\/li\u003e\n\u003cli\u003eDry at 80 °C for 4 hours if the spool has been open for a while. Check our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e — several reach that temperature.\u003c\/li\u003e\n\u003cli\u003ePrint in a ventilated area, as you would with any ABS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 750 g spool, black. SKU ABS07FR200750BK00, verified on 3dxtech.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it fireproof?\u003c\/strong\u003e\u003cbr\u003eIt's flame retardant and self-extinguishing. The base resin is rated UL94 V-0 at 1.5 mm thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre my printed parts V-0 rated?\u003c\/strong\u003e\u003cbr\u003eNot automatically. The TDS rating applies to the base resin; the finished part would need to be tested separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a heated enclosure?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one. A enclosed printer makes a significant difference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003cbr\u003eNo, 3DXTech doesn't specify any special nozzle requirements for this filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the heat resistance of printed parts?\u003c\/strong\u003e\u003cbr\u003eHDT of 95 °C at 0.45 MPa and a Tg of 105 °C, according to the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it used for?\u003c\/strong\u003e\u003cbr\u003e3DXTech targets this filament at automotive, aerospace, consumer electronics, and industrial equipment applications where flame spread risk needs to be minimized.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be smoothed with acetone?\u003c\/strong\u003e\u003cbr\u003e3DXTech doesn't mention acetone smoothing for this material, so we can't confirm whether it works.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213581599057,"sku":"ABS07FR200750BK00","price":87.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-firewire-fr-abs-filamento-1.jpg?v=1791386719"},{"product_id":"3dxtech-obsidian-gf-pa6-gf-filamento","title":"3DXTech Obsidian-GF PA6+GF - Glass Fiber Nylon Filament 1.75mm 1kg","description":"\u003ch2\u003e3DXTech Obsidian-GF PA6+GF: Glass-Filled Nylon Compatible with Markforged (1 kg, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eObsidian-GF is a short glass fiber-filled PA6 copolymer developed by 3DXTech as a drop-in alternative to Onyx for Markforged printers, though it also runs on open-frame machines built for PA6+GF. Compared to carbon-filled PA6, it's less brittle and comes in multiple colors. This listing is for the metallic silver variant, 1 kg spool, 1.75 mm. A hardened steel nozzle and a 90–110 °C bed are required.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePA6 copolymer with short glass fiber reinforcement (15% per the TDS).\u003c\/li\u003e\n\u003cli\u003eMore ductile and less brittle than carbon fiber-filled PA6, per 3DXTech.\u003c\/li\u003e\n\u003cli\u003eCompatible with Markforged FX20, X7, X5, X3, Mark Two, Onyx Pro, and Onyx One.\u003c\/li\u003e\n\u003cli\u003eTensile strength of 85 MPa and HDT of 176 °C at 0.45 MPa (TDS).\u003c\/li\u003e\n\u003cli\u003eResistant to aliphatic hydrocarbons: oils, gasoline, and lubricants.\u003c\/li\u003e\n\u003cli\u003eNozzle temp 265–285 °C, bed 90–110 °C, enclosed chamber recommended, hardened steel nozzle required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill My Printer Handle This Filament?\u003c\/h3\u003e\n\u003cp\u003eIf you own a Markforged printer from 3DXTech's compatibility list, yes — it works as a direct Onyx replacement. For open-frame printers, you'll need a hotend capable of reaching 285 °C, a bed that holds 90–110 °C, a hardened steel nozzle, and ideally an enclosed chamber: 3DXTech recommends a heated enclosure. If you're running an open machine with a brass nozzle, skip this one — you'll burn through nozzles and fight warping the entire time.\u003c\/p\u003e\n\u003ch3\u003eGlass Fiber vs. Carbon Fiber: Which Should You Choose?\u003c\/h3\u003e\n\u003cp\u003eGlass fiber produces parts that are slightly less stiff but tougher — better at absorbing impact without cracking. 3DXTech specifically markets Obsidian-GF as more ductile than their carbon-filled PA6. If you want to dig deeper, check out our article on \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-de-nylon-propiedades-y-cuando-usarlo\"\u003enylon filament properties and when to use them\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy Dry at 90 °C?\u003c\/h3\u003e\n\u003cp\u003ePA6 absorbs moisture fast, and wet nylon bubbles, strings, and loses mechanical strength. 3DXTech specifies drying at 90 °C for 4 hours before printing. If you don't have a filament dryer yet, browse our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryer selection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePA6 copolymer + glass fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eMetallic Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e265–285 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e90–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.10 mm or greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e90 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.22 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e85 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e4.6 GPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e5.8%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e128 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e4.7 GPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e176 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrint Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways use a hardened steel nozzle, as specified by 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTDS specimens were printed on a Markforged Onyx One at 0.125 mm layer height and 100% infill.\u003c\/li\u003e\n\u003cli\u003eDry the spool right before printing and store it with desiccant. On a Markforged, keep it in the dry box.\u003c\/li\u003e\n\u003cli\u003eFor open-frame printers, use a nylon-compatible bed adhesive and print in an enclosed space.\u003c\/li\u003e\n\u003cli\u003eAvoid drafts and airflow: PA6 shrinks as it cools and will warp or lift corners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format and color is this?\u003c\/strong\u003e\u003cbr\u003e1.75 mm, 1 kg spool, metallic silver. Part number NYL10GF101000SV01, verified on 3dxtech.com.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with my Markforged?\u003c\/strong\u003e\u003cbr\u003e3DXTech lists it as compatible with the FX20, X7, X5, X3, Mark Two, Onyx Pro, and Onyx One.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it in an open-frame printer?\u003c\/strong\u003e\u003cbr\u003eYes, in any printer capable of running PA6+GF, according to 3DXTech. You'll need a hardened nozzle and the ability to reach 285 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require a heated chamber?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eHDT of 176 °C at 0.45 MPa per the TDS. Tg is 70 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it conductive or ESD-safe?\u003c\/strong\u003e\u003cbr\u003eNo. The TDS reports a surface resistance greater than 10⁹ Ω\/sq.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it resistant to oils and fuels?\u003c\/strong\u003e\u003cbr\u003e3DXTech cites resistance to aliphatic hydrocarbons including oil, gasoline, and lubricants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as Onyx?\u003c\/strong\u003e\u003cbr\u003e3DXTech positions it as an Onyx alternative, but Onyx uses carbon fiber while this filament uses fiberglass. For a direct carbon fiber substitute, check out the Obsidian Nylon 6+CF V2.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213582483793,"sku":"NYL10GF101000SV01","price":154.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-obsidian-gf-pa6-gf-filamento-1.jpg?v=1791386726"},{"product_id":"3dxtech-obsidian-nylon-6-cf-v2-filamento","title":"3DXTech Obsidian Nylon 6+CF V2 - Carbon Fiber PA6 Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech Obsidian Nylon 6+CF V2: Onyx Alternative for Markforged and Open-Frame Printers (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eObsidian CF V2 is the second generation of 3DXTech's carbon fiber PA6 filament. The original version underperformed on Markforged printers, so they rebuilt the formula from scratch — and now position it as a direct drop-in alternative to Onyx. The TDS includes independent lab data comparing it head-to-head against Onyx on the same machine with identical settings. Available here in black, 750 g, 1.75 mm. Also compatible with open-frame printers capable of running PA6+CF.\u003c\/p\u003e\n\u003ch3\u003eKey Specs at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePA6 copolymer with high-modulus carbon fiber reinforcement.\u003c\/li\u003e\n\u003cli\u003eIndependently tested against Onyx on a Markforged X7 — data included in the TDS.\u003c\/li\u003e\n\u003cli\u003eHDT of 147 °C at 0.45 MPa, versus 145 °C for Onyx under the same test conditions.\u003c\/li\u003e\n\u003cli\u003eNozzle: 265–285 °C | Bed: 90–110 °C | Enclosed chamber recommended.\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle required.\u003c\/li\u003e\n\u003cli\u003eDry at 80 °C for 6 hours before printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs My Printer Compatible?\u003c\/h3\u003e\n\u003cp\u003eOn Markforged machines, this is right in its element. For open-frame printers, you'll need a hotend that reaches 285 °C, a heated bed at 90–110 °C, a hardened steel nozzle, and ideally an enclosed build chamber — 3DXTech specifically recommends a heated enclosure. If your printer has a brass nozzle and you're not planning to upgrade it, skip this filament: carbon fiber will destroy it.\u003c\/p\u003e\n\u003ch3\u003eDoes It Actually Match Onyx?\u003c\/h3\u003e\n\u003cp\u003eHere are the numbers straight from the 3DXTech TDS, tested on a Markforged X7 at 275 °C. Z-axis tensile: 23.4 MPa vs. 20.1 MPa for Onyx. XY-plane tensile: 23.8 vs. 26.1. Edge-on tensile: 31.0 vs. 31.9. Modulus is higher across all three orientations, and edge-on flexural strength also edges ahead (33.9 vs. 30.8 MPa). Unnotched Izod impact comes in slightly lower: 854 vs. 940 J\/m. Overall: very comparable performance, with a stiffness advantage. For more on this category of materials, check out our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-con-fibra-de-carbono-guia-completa\"\u003ecomplete guide to carbon fiber filament\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePA6 copolymer + carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e265–285 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e90–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle type\u003c\/td\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.10 mm or greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e80 °C, 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.2 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-axis tensile (ASTM D638)\u003c\/td\u003e\n\u003ctd\u003e23.4 MPa \/ modulus 1,351 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY-plane tensile\u003c\/td\u003e\n\u003ctd\u003e23.8 MPa \/ modulus 731 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdge-on tensile\u003c\/td\u003e\n\u003ctd\u003e31.0 MPa \/ modulus 1,510 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdge-on flexural (ASTM D790)\u003c\/td\u003e\n\u003ctd\u003e33.9 MPa \/ modulus 1,048 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnnotched Izod impact (ASTM D256)\u003c\/td\u003e\n\u003ctd\u003e854 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e147 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel nozzle is mandatory — 3DXTech explicitly states this in their documentation.\u003c\/li\u003e\n\u003cli\u003eDry for 6 hours at 80 °C before printing; moisture in PA6 shows up immediately in surface quality. Browse our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTDS test conditions: 275 °C, 30 mm\/s, 0.20 mm layer height, solid infill, Markforged X7.\u003c\/li\u003e\n\u003cli\u003eOn open-frame printers, enclose the build chamber and use a nylon-compatible bed adhesive.\u003c\/li\u003e\n\u003cli\u003eThe 750 g spool fits the Bambu Lab AMS according to 3DXTech — but watch for moisture absorption if you leave it loaded for extended periods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format is this?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 750 g spool, black. SKU 024BK00A-750G, verified on 3dxtech.com.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it compatible with Markforged printers?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech positions it as a direct drop-in alternative to Onyx and has validated it on Markforged printers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat about Bambu Lab or Prusa?\u003c\/strong\u003e\u003cbr\u003eYes, as long as they have a hardened nozzle and can reach 285 °C. 3DXTech lists it as compatible with any printer that supports PA6+CF.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require a heated chamber?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the heat resistance?\u003c\/strong\u003e\u003cbr\u003eHDT of 147 °C at 0.45 MPa, per the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is there a V2?\u003c\/strong\u003e\u003cbr\u003e3DXTech reformulated the material because the original version did not perform as expected on Markforged printers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it need to be dried?\u003c\/strong\u003e\u003cbr\u003e80 °C for 6 hours, according to the 3DXTech datasheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho conducted the testing?\u003c\/strong\u003e\u003cbr\u003eAccording to the TDS, an independent laboratory — comparing each specimen against Onyx using the same printer, settings, and orientation.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213582811473,"sku":"024BK00A-750G","price":118.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-obsidian-nylon-6-cf-v2-filamento-1.jpg?v=1791386729"},{"product_id":"3dxtech-3dxstat-esd-petg-filamento","title":"3DXTech 3DXSTAT ESD-PETG - ESD PETG Filament 1.75mm 750g \/ 2kg","description":"\u003ch2\u003e3DXTech 3DXSTAT ESD-PETG: Static-Dissipative PETG for Sensitive Electronics (750 g or 2 kg, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003e3DXSTAT ESD-PETG is a PETG filament loaded with multi-walled carbon nanotubes (MWCNT) for effective static dissipation. 3DXTech targets a surface resistance of 10⁴ to 10⁹ ohms — making it the go-to choice for trays, fixtures, and holders that come into contact with PCBs and electronic components. It prints like a standard PETG but at slightly higher temperatures, no heated enclosure required. Available in black, 1.75 mm, on 750 g or 2 kg spools.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESD compound with multi-walled carbon nanotubes (MWCNT).\u003c\/li\u003e\n\u003cli\u003eTarget surface resistance: 10⁴–10⁹ Ω; TDS specifies 10⁷–10⁹ Ω\/sq (ASTM D257).\u003c\/li\u003e\n\u003cli\u003eNozzle temp: 260–280 °C; bed temp: 60–90 °C; no heated enclosure needed.\u003c\/li\u003e\n\u003cli\u003eAbsorbs three times less moisture than ABS and offers greater ductility, per 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTg of 80 °C and HDT of 75 °C at 0.45 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eDry at 65 °C for 4 hours before printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eAlmost certainly. It requires a nozzle capable of 260–280 °C and a bed temperature of 60–90 °C — and 3DXTech confirms no heated enclosure or specialty nozzle is needed. Any printer with an all-metal hotend will run this filament without issues. If your hotend uses a PTFE-lined throat that reaches the nozzle, avoid sustained printing at 280 °C.\u003c\/p\u003e\n\u003ch3\u003eWhat Does ESD Mean and Why Do I Need It?\u003c\/h3\u003e\n\u003cp\u003eAn ESD material doesn't build up static charge — it slowly bleeds it away before it can arc across a sensitive component. That's why it's used for PCB assembly trays, guides, test fixtures, and electronics transport cases. One important note: the 3DXTech website lists 10⁴–10⁹ Ω as the target range, while the technical datasheet specifies \u0026gt;10⁷–10⁹ Ω\/sq. For any critical application, measure your printed part directly.\u003c\/p\u003e\n\u003ch3\u003e750 g or 2 kg Spool?\u003c\/h3\u003e\n\u003cp\u003eSame material, different quantity. The 750 g spool is compatible with multi-material systems such as the Bambu AMS, Creality CFS, and Anycubic ACE Pro, according to 3DXTech. The 2 kg spool makes more sense if you're running production batches of ESD tooling or fixtures.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePETG with carbon nanotubes (ESD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable sizes\u003c\/td\u003e\n\u003ctd\u003e750 g or 2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e260–280 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e60–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements per 3DXTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e65 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.28 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e50 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e1800 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e13%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e74 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e1780 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistance (ASTM D257)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10⁷–10⁹ Ω\/sq (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe TDS test specimens were printed at 250 °C with a 70 °C bed, 0.25 mm layer height, and 100% infill — a solid starting point even though the recommended range is 260–280 °C.\u003c\/li\u003e\n\u003cli\u003eDry it at 65 °C for 4 hours even if the spool is brand new. Any of our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e can reach that temperature.\u003c\/li\u003e\n\u003cli\u003eDo not use acetone or paint the surface if you need to maintain surface conductivity.\u003c\/li\u003e\n\u003cli\u003eMeasure the resistance on the finished part, especially if you significantly change the print temperature or flow rate.\u003c\/li\u003e\n\u003cli\u003eLike all PETG, on smooth PEI a thin layer of adhesive is recommended to prevent the build surface from tearing when removing the print.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sizes do you carry?\u003c\/strong\u003e\u003cbr\u003e1.75 mm in black, available on 750 g or 2 kg spools. Both SKUs (PTG02ES100750BK00 and PTG02ES102000BK00) are verified on 3dxtech.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a heated enclosure required?\u003c\/strong\u003e\u003cbr\u003eNo. 3DXTech states that an enclosure is not necessary for this material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003cbr\u003e3DXTech does not specify any special nozzle requirements for this filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surface resistance does it achieve?\u003c\/strong\u003e\u003cbr\u003eThe product page targets 10⁴–10⁹ Ω, while the TDS reports \u0026gt;10⁷–10⁹ Ω\/sq measured per ASTM D257.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for electronics enclosures?\u003c\/strong\u003e\u003cbr\u003eYes, that's a primary use case: trays, brackets, and fixtures that come into contact with static-sensitive components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow heat-resistant is it?\u003c\/strong\u003e\u003cbr\u003eAbout what you'd expect from a PETG: HDT of 75 °C and Tg of 80 °C per the TDS. Keep it away from heat sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it smell while printing?\u003c\/strong\u003e\u003cbr\u003e3DXTech describes it as very low odor during printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it with the AMS?\u003c\/strong\u003e\u003cbr\u003eThe 750 g spool fits in the AMS, according to 3DXTech. For other materials compatible with your printer, check out our full range of \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003e3D printing filaments\u003c\/a\u003e.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Negro \/ 1,75 mm \/ 2 kg","offer_id":55213582975313,"sku":"PTG02ES102000BK00","price":296.45,"currency_code":"EUR","in_stock":true},{"title":"Negro \/ 1,75 mm \/ 750 g","offer_id":55213583171921,"sku":"PTG02ES100750BK00","price":130.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-3dxstat-esd-petg-filamento-1.jpg?v=1791386732"},{"product_id":"3dxtech-thermax-peek-filamento","title":"3DXTech ThermaX PEEK - PEEK Filament 1.75mm 500g","description":"\u003ch2\u003e3DXTech ThermaX PEEK Filament: Industrial-Grade Ultra-Polymer (500g, 1.75mm)\u003c\/h2\u003e\n\u003cp\u003eThermaX PEEK is the material you reach for when part failure simply isn't an option: aggressive chemicals, sustained high heat, and hydrolysis resistance above 250°C. This is a natural, 500g spool in 1.75mm diameter. Fair warning upfront: PEEK is not a filament to experiment with on a desktop printer. 3DXTech themselves state that most standard printers cannot maintain the conditions this material requires.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTg of 143°C, continuous use temperature of 240–260°C, and Tm of 343°C (per 3DXTech).\u003c\/li\u003e\n\u003cli\u003eTensile strength of 100 MPa with 28% elongation at break (TDS).\u003c\/li\u003e\n\u003cli\u003eBase resin rated UL94 V-0 at 1.5mm — self-extinguishing with low smoke emissions.\u003c\/li\u003e\n\u003cli\u003eLong-term hydrolytic stability even above 250°C.\u003c\/li\u003e\n\u003cli\u003eNozzle: 400–480°C | Bed: 140–180°C | Heated enclosure: 70–140°C.\u003c\/li\u003e\n\u003cli\u003eDry at 120°C for 4 hours before printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan My Printer Handle PEEK?\u003c\/h3\u003e\n\u003cp\u003eMost likely not, unless you're running a dedicated high-temperature machine. 3DXTech's product data sheet specifies a nozzle temperature of 400–480°C, bed temperature of 140–180°C, and an actively heated enclosure at 70–140°C. Their product description also references a slightly lower hotend range of 360–450°C, along with the requirement for a fully enclosed, actively heated chamber. Either way, a standard desktop hotend with PTFE components or a basic thermistor won't cut it. If your printer doesn't meet these specs, this filament isn't for you.\u003c\/p\u003e\n\u003ch3\u003eWhat Should I Use Instead?\u003c\/h3\u003e\n\u003cp\u003e3DXTech themselves suggest several alternatives: PEKK, which offers PAEK-family performance with a more forgiving print window; PEI (ULTEM), which prints more predictably; or PPS if chemical resistance is your primary concern. You'll find all of these in our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat Parts Is PEEK Actually Right For?\u003c\/h3\u003e\n\u003cp\u003eParts in direct contact with automotive fluids, halogenated hydrocarbons, alcohols, and aqueous solutions — the full chemical resistance profile listed by 3DXTech. It's also the right call wherever dimensional repeatability matters, thanks to its low, uniform thermal expansion and excellent creep resistance at elevated temperatures.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePEEK (polyether ether ketone)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e500 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd\u003e400–480 °C (product datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e140–180 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended, 70–140 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements per 3DXTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e120 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.30 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e100 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Modulus\u003c\/td\u003e\n\u003ctd\u003e3720 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e28%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e130 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd\u003e2700 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e143 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTm\u003c\/td\u003e\n\u003ctd\u003e343 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e140 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability\u003c\/td\u003e\n\u003ctd\u003eUL94 V-0 at 1.5 mm (base resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePurge the nozzle when you finish printing. 3DXTech warns that if PEEK cools inside the hotend, black specks and extremely difficult clogs can develop.\u003c\/li\u003e\n\u003cli\u003eUse a slow print speed and reduce or turn off the part cooling fan, as recommended by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eDry thoroughly: 120 °C for 4 hours. You'll need a dryer capable of reaching that temperature — check out our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e and verify the maximum temperature for each model.\u003c\/li\u003e\n\u003cli\u003eThe TDS test specimens were printed at 380–400 °C with a bed temperature of 130–140 °C, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eLet the enclosure reach and stabilize at temperature well before you start printing to ensure consistent conditions throughout the build volume.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat diameter and weight is this filament?\u003c\/strong\u003e\u003cbr\u003e1.75 mm and 500 g, natural color. SKU PK001UN200500NAT0, verified on 3dxtech.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I print this on a Bambu Lab or Prusa printer?\u003c\/strong\u003e\u003cbr\u003eNo. 3DXTech states that most standard desktop printers cannot reliably maintain the conditions PEEK requires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat nozzle temperature should I use?\u003c\/strong\u003e\u003cbr\u003eThe product datasheet lists 400–480 °C, while the product description states 360–450 °C. The TDS test specimens were printed at 380–400 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a heated enclosure?\u003c\/strong\u003e\u003cbr\u003eYes. 3DXTech recommends an enclosure temperature of 70–140 °C, and the product description emphasizes that it must be an active, fully enclosed chamber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it flame retardant?\u003c\/strong\u003e\u003cbr\u003eThe base resin is rated UL94 V-0 at 1.5 mm per the TDS. The manufacturer describes it as self-extinguishing with low smoke and toxic gas emissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the HDT?\u003c\/strong\u003e\u003cbr\u003e140 °C at 0.45 MPa per the TDS. 3DXTech lists a continuous use temperature of 240–260 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eNot for this unfilled PEEK, according to 3DXTech. The critical factor is hotend temperature capability, not nozzle hardness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have medical or aerospace certification?\u003c\/strong\u003e\u003cbr\u003e3DXTech does not list any such certifications on this filament's product page, so we don't claim any either.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213583597905,"sku":"PK001UN200500NAT0","price":420.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-thermax-peek-filamento-1.jpg?v=1791386735"},{"product_id":"3dxtech-thermax-pei-1010-filamento","title":"3DXTech ThermaX PEI 1010 - ULTEM 1010 PEI Filament 1.75mm 500g","description":"\u003ch2\u003e3DXTech ThermaX PEI 1010: Highest-Temperature PEI Filament Made with ULTEM 1010 Resin (500g, 1.75mm)\u003c\/h2\u003e\n\u003cp\u003eThermaX PEI 1010 is 3DXTech's PEI filament formulated with ULTEM 1010 resin. Compared to the 9085 grade, it raises the Tg to 217 °C and HDT to 208 °C — making it the go-to choice when parts truly need to perform under sustained heat. Available in black and natural, 500g at 1.75mm. The trade-off is demanding hardware requirements: nozzle temps of 370–390 °C, bed temps of 120–160 °C, and a heated enclosure.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFormulated with ULTEM 1010 resin, per 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTg of 217 °C and HDT of 208 °C at 0.45 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eBase resin rated UL94 V-0 at 1.5 mm.\u003c\/li\u003e\n\u003cli\u003eStable dielectric constant and dissipation factor across a wide range of temperatures and frequencies.\u003c\/li\u003e\n\u003cli\u003eNozzle: 370–390 °C | Bed: 120–160 °C | Heated enclosure recommended.\u003c\/li\u003e\n\u003cli\u003eDemanding drying requirements: 150 °C for 4 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a genuine high-temperature 3D printer. 3DXTech requires 370–390 °C at the nozzle, 120–160 °C at the bed, and recommends a heated enclosure. An all-metal desktop hotend rated to 300 °C won't cut it. If your printer can't reach those temps, this isn't the filament for you. Also check your filament dryer: the 150 °C drying requirement is beyond the reach of most consumer-grade dryers.\u003c\/p\u003e\n\u003ch3\u003eBlack or Natural?\u003c\/h3\u003e\n\u003cp\u003e3DXTech publishes a single datasheet for PEI 1010 without separating by color, so both variants are the same material on paper. Choose based on aesthetics or to make parts easier to identify in your workshop.\u003c\/p\u003e\n\u003ch3\u003eWhat Is PEI 1010 Used For?\u003c\/h3\u003e\n\u003cp\u003e3DXTech highlights high strength and stiffness retention at elevated temperatures, dimensional stability, good chemical resistance, and stable dielectric properties. That makes it well suited for tooling that goes through ovens, parts near motors, and electrical insulation components. If you're still weighing your options, browse our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePEI (ULTEM 1010)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e500 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColors\u003c\/td\u003e\n\u003ctd\u003eBlack or Natural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd\u003e370–390 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e120–160 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements per 3DXTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e150 °C, 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.27 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e56 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Modulus\u003c\/td\u003e\n\u003ctd\u003e2500 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e110 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd\u003e2510 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e217 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e208 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability\u003c\/td\u003e\n\u003ctd\u003eUL94 V-0 at 1.5 mm (base resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry at 150 °C for 4 hours. Check the maximum temperature rating before purchasing one of our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e — you'll need one that actually reaches that temp.\u003c\/li\u003e\n\u003cli\u003e3DXTech's test specimens were printed at 380–400 °C with a 130–140 °C bed, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eTurn the part cooling fan off or as close to off as possible.\u003c\/li\u003e\n\u003cli\u003ePre-heat the enclosure and let parts cool inside with the door closed.\u003c\/li\u003e\n\u003cli\u003ePEI bonds aggressively to certain surfaces — use a release layer if your build plate is PEI.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat formats are available?\u003c\/strong\u003e\u003cbr\u003e1.75 mm, 500g, in black (PEI02UN200500BK01) and natural (PEI02UN200500NAT0). Verified on 3dxtech.com.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat nozzle temperature does it require?\u003c\/strong\u003e\u003cbr\u003e370–390 °C according to 3DXTech.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I print it without an enclosure?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one. Without it, you'll only be able to print very small parts and risk delamination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature can the printed part withstand?\u003c\/strong\u003e\u003cbr\u003eHDT of 208 °C at 0.45 MPa and a Tg of 217 °C per the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it flame retardant?\u003c\/strong\u003e\u003cbr\u003eThe base resin is rated UL94 V-0 at 1.5 mm per the TDS. This does not certify your printed part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eNo — it contains no fibers. 3DXTech lists no nozzle requirements for this filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it need to be dried at 150 °C?\u003c\/strong\u003e\u003cbr\u003eThat's what 3DXTech specifies for this grade. Moisture causes PEI to bubble and lose mechanical strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this an ESD-safe material?\u003c\/strong\u003e\u003cbr\u003eNo. This is an unfilled PEI with no conductive additives — 3DXTech offers a separate ESD-PEI 1010 grade for that.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Negro \/ 1,75 mm \/ 500 g","offer_id":55213584777553,"sku":"PEI02UN200500BK01","price":142.3,"currency_code":"EUR","in_stock":true},{"title":"Natural \/ 1,75 mm \/ 500 g","offer_id":55213584843089,"sku":"PEI02UN200500NAT0","price":142.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-thermax-pei-1010-filamento-1.jpg?v=1791386739"},{"product_id":"3dxtech-thermax-pei-9085-filamento","title":"3DXTech ThermaX PEI 9085 - ULTEM 9085 PEI Filament 1.75mm 500g","description":"\u003ch2\u003e3DXTech ThermaX PEI 9085: ULTEM 9085-Based PEI Filament for High-Temperature Parts (500g, 1.75mm)\u003c\/h2\u003e\n\u003cp\u003eThermaX PEI 9085 is 3DXTech's filament formulated with SABIC ULTEM 9085 resin. It's an amorphous PEI with a Tg of 186°C — slightly tougher and more forgiving to print than PEI 1010, with low smoke emission according to the manufacturer. Available here in natural color, 500g, 1.75mm. A high-temperature printer is an absolute requirement: nozzle at 350–380°C, bed at 140–160°C, and an actively heated enclosure.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompounded with ULTEM 9085 resin, per 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTg of 186°C and HDT of 158°C at 0.45 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eBase resin rated UL94 V-0 at 1.5mm, with low smoke emission and low smoke toxicity.\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability and minimal creep at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eNozzle: 350–380°C | Bed: 140–160°C | Heated enclosure recommended.\u003c\/li\u003e\n\u003cli\u003eDry at 120°C for 4 hours before printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill My Printer Handle This Filament?\u003c\/h3\u003e\n\u003cp\u003eOnly if it's a true high-temperature machine. You need a hotend that runs reliably at 350–380°C, a bed capable of 140–160°C, and a heated enclosure — which 3DXTech recommends. A closed printer without active chamber heating isn't enough for any part of real size: PEI shrinks and lifts off the bed. If your printer doesn't meet these requirements, this is not the filament for you.\u003c\/p\u003e\n\u003ch3\u003ePEI 9085 vs. PEI 1010 — Which One Do You Need?\u003c\/h3\u003e\n\u003cp\u003eAccording to 3DXTech's datasheets, PEI 1010 handles higher temperatures (Tg 217°C vs. 186°C, HDT 208°C vs. 158°C) and is stiffer. PEI 9085 is slightly less demanding on nozzle temperature and a bit easier to print. If your part won't see service temperatures above 150°C, 9085 is typically the right choice.\u003c\/p\u003e\n\u003ch3\u003eDoes It Have Aerospace Certifications?\u003c\/h3\u003e\n\u003cp\u003e3DXTech does not cite any FST standards or aerospace certifications on this filament's product page, so we won't make that claim either. What they do state is low smoke emission and toxicity, plus UL94 V-0 classification for the base resin. Browse more options in our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePEI (ULTEM 9085)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e500 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd\u003e350–380 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e140–160 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements per 3DXTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e120 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.34 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e54 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Modulus\u003c\/td\u003e\n\u003ctd\u003e2050 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e90 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd\u003e2170 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e186 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e158 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability\u003c\/td\u003e\n\u003ctd\u003eUL94 V-0 at 1.5 mm (base resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry at 120 °C for 4 hours immediately before printing. If your dryer doesn't reach 120 °C, check out our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e3DXTech's test specimens were printed at 365–385 °C with a 130–140 °C bed, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eKeep the part cooling fan at minimum or off. PEI needs ambient heat around the print, not airflow.\u003c\/li\u003e\n\u003cli\u003eLet the enclosure fully heat-soak before starting, and don't open the door until the part has cooled down completely.\u003c\/li\u003e\n\u003cli\u003eFor bed adhesion, use the surface your printer manufacturer recommends for PEI. Printing directly on a smooth PEI sheet may cause the part to bond so strongly it tears the surface off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 500 g spool, natural color. Part number PEI01UN200500NAT0, verified on 3dxtech.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat nozzle temperature should I use?\u003c\/strong\u003e\u003cbr\u003e350–380 °C per the 3DXTech product data sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a heated enclosure?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one. Without it, medium-to-large prints are prone to warping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much heat can printed parts handle?\u003c\/strong\u003e\u003cbr\u003eHDT of 158 °C at 0.45 MPa and a Tg of 186 °C per the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it flame retardant?\u003c\/strong\u003e\u003cbr\u003eThe base resin is rated UL94 V-0 at 1.5 mm per the TDS, and 3DXTech notes low smoke emission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it meet FST requirements for aerospace?\u003c\/strong\u003e\u003cbr\u003e3DXTech does not specify FST compliance on this product's page, so we cannot confirm it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eNo — this filament contains no abrasive fillers. 3DXTech lists no special nozzle requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it chemical resistant?\u003c\/strong\u003e\u003cbr\u003e3DXTech cites good resistance to automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213585039697,"sku":"PEI01UN200500NAT0","price":171.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-thermax-pei-9085-filamento-1.jpg?v=1791386741"},{"product_id":"3dxtech-thermax-pekk-a-filamento","title":"3DXTech ThermaX PEKK-A - PEKK Filament 1.75mm 500g","description":"\u003ch2\u003e3DXTech ThermaX PEKK-A: PAEK Polymer for Heat- and Chemical-Resistant Parts (500 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eThermaX PEKK-A is 3DXTech's PEKK filament, made with Arkema Kepstan resin. It plays in the same league as PEEK, but 3DXTech themselves are clear that it's significantly easier to print — it crystallizes more slowly and builds up less internal stress. I stock it as a 500 g black spool in 1.75 mm. If you're looking for a PAEK-family ultra-polymer and your printer can hit 375 °C with a heated chamber, I'd start here before jumping to PEEK.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade with Arkema Kepstan PEKK resin, per 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTg of 165 °C and Tm of 335 °C per datasheet; HDT at 0.45 MPa of 182 °C.\u003c\/li\u003e\n\u003cli\u003eTensile strength of 105 MPa and elongation at break of 10% (3DXTech TDS).\u003c\/li\u003e\n\u003cli\u003eBase resin rated UL94 V-0 at 0.8 mm with low smoke generation.\u003c\/li\u003e\n\u003cli\u003eNozzle temp 345–375 °C, bed temp 120–140 °C, heated chamber strongly recommended.\u003c\/li\u003e\n\u003cli\u003eMust be dried at 120 °C for 4 hours before printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eIt comes down to three requirements — and you need to meet all three. You'll need a hotend that runs stably between 345 and 375 °C, a bed that reaches 120–140 °C, and, following 3DXTech's guidance, a heated chamber at 70–150 °C wherever possible. A closed desktop printer without an active heated enclosure will struggle with layer adhesion and warping. If your printer can't hit those temperatures, don't buy it — it's a waste of money.\u003c\/p\u003e\n\u003ch3\u003ePEKK vs. PEEK: Which One Do I Need?\u003c\/h3\u003e\n\u003cp\u003e3DXTech puts it plainly on their website: PEKK is substantially easier to print than PEEK and offers a wider processing window. Looking at their datasheets, PEKK delivers a Tg of 165 °C versus 143 °C for PEEK, and an HDT of 182 °C versus 140 °C. PEEK wins on elongation at break (28% vs. 10%). If you don't have a machine built specifically for PEEK, PEKK is the smarter starting point.\u003c\/p\u003e\n\u003ch3\u003eWhere Does It Make Sense?\u003c\/h3\u003e\n\u003cp\u003e3DXTech highlights Kepstan resin's use in aerospace, oil \u0026amp; gas, and defense applications. In practical terms: functional parts that run hot, come into contact with aggressive fluids, or need good flame performance. Keep in mind that those references apply to the base resin — not a certification of the finished printed part.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePEKK (Arkema Kepstan), amorphous grade PEKK-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e500 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd\u003e345–375 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e120–140 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended, 70–150 °C if possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements per 3DXTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e120 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.29 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e105 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Modulus\u003c\/td\u003e\n\u003ctd\u003e3200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e134 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd\u003e2900 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e165 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTm (DSC)\u003c\/td\u003e\n\u003ctd\u003e335 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e182 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability\u003c\/td\u003e\n\u003ctd\u003eUL94 V-0 at 0.8 mm (base resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways dry at 120 °C for 4 hours. A kitchen oven isn't ideal — use a dryer that holds a stable temperature. Check out our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e, but make sure the one you choose reaches 120 °C.\u003c\/li\u003e\n\u003cli\u003eStart in the middle of the temperature window (around 360 °C) and dial it in from there. 3DXTech's own test specimens were printed at 370 °C with a 130 °C bed.\u003c\/li\u003e\n\u003cli\u003eClose your printer's enclosure and let the chamber temperature stabilize before starting your print.\u003c\/li\u003e\n\u003cli\u003eKeep the part cooling fan low or off for the first few layers.\u003c\/li\u003e\n\u003cli\u003eThe TDS test specimens used 0.25 mm layer height and 100% infill — if you want to get close to those mechanical values, print solid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat diameter and weight is this spool?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 500 g net weight, in black. We verified this against SKU PKK09UN100500BK01 on the 3DXTech website.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003cbr\u003e3DXTech lists no special nozzle requirements for unfilled PEKK. What you do need is a hotend capable of sustained printing at 375 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a heated enclosure required?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one at 70–150 °C if possible. Without an active enclosure you may get away with small parts, but on medium-sized prints layer delamination becomes a real issue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much heat can the printed part handle?\u003c\/strong\u003e\u003cbr\u003eThe HDT at 0.45 MPa is 182 °C, and 3DXTech lists a continuous use temperature of 260 °C. Tg is 165 °C per the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it flame retardant?\u003c\/strong\u003e\u003cbr\u003eThe base resin carries a UL94 V-0 rating at 0.8 mm per the datasheet. This is not a certification for your finished printed part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the product page say Tg 162 °C but the TDS says 165 °C?\u003c\/strong\u003e\u003cbr\u003eThese come from two different 3DXTech documents. We use the TDS value in the table above and flag the discrepancy so there are no surprises.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it need to be dried?\u003c\/strong\u003e\u003cbr\u003e4 hours at 120 °C, per 3DXTech's recommendations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it better than PEI?\u003c\/strong\u003e\u003cbr\u003eIt depends on your application. PEKK shows better elongation at break and tensile strength in 3DXTech's datasheets; PEI 1010 has a higher Tg. You'll find both in our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213585432913,"sku":"PKK09UN100500BK01","price":468.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-thermax-pekk-a-filamento-1.jpg?v=1791386744"},{"product_id":"ultrafuse-paht-cf15-filamento","title":"Ultrafuse PAHT CF15 - Carbon Fiber PA Filament 1.75\/2.85 mm 750 g","description":"\u003ch2\u003eUltrafuse PAHT CF15: Carbon Fiber Nylon for Rigid, Heat-Resistant Parts (750 g, 1.75 or 2.85 mm)\u003c\/h2\u003e\n\u003cp\u003eUltrafuse PAHT CF15 is a high-temperature polyamide filled with 15% carbon fiber, developed by BASF and Forward AM. Forward AM markets it as easy to process — and in practice, it delivers: no heated enclosure required, low moisture absorption, and minimal warping. What you absolutely cannot skip is a hardened steel or ruby nozzle of 0.6 mm or larger. Available in both 1.75 mm and 2.85 mm diameters, always in black.\u003c\/p\u003e\n\u003ch3\u003eKey Specs at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-temperature polyamide with 15% carbon fiber, black.\u003c\/li\u003e\n\u003cli\u003eHardened steel or ruby nozzle required, minimum 0.6 mm.\u003c\/li\u003e\n\u003cli\u003eHDT of 145 °C at 0.45 MPa (dry), with heat resistance up to 150 °C per Forward AM's datasheet.\u003c\/li\u003e\n\u003cli\u003eESD-safe: surface resistivity of 10^5 to 10^11 Ω.\u003c\/li\u003e\n\u003cli\u003e750 g spool in 1.75 mm (PAHT-4500a075) or 2.85 mm (PAHT-4500b075).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill It Work With My Printer?\u003c\/h3\u003e\n\u003cp\u003eMost likely yes — as long as you swap out the nozzle. Forward AM states it works with any FFF printer equipped with a hardened nozzle, with no heated chamber required. A brass nozzle will wear out fast from the carbon fiber, so upgrading is non-negotiable. Your hotend needs to reach 270–280 °C, and your bed should hit your target temperature without issue. Official profiles are available for Prusa, Raise3D, Bambu Lab, Ultimaker, and BCN3D. Choose the right diameter for your machine: 1.75 mm for most printers, 2.85 mm for Ultimaker and other machines that use that size.\u003c\/p\u003e\n\u003ch3\u003eWhat Is This Filament Best For?\u003c\/h3\u003e\n\u003cp\u003eFunctional parts that need to be stiff, heat-resistant, and chemically durable. Forward AM highlights its use in complex geometries for demanding environments and automotive applications, noting its chemical resistance outperforms most standard polyamides. The flexural modulus in XY reaches 8,258 MPa — well above unfilled nylon. The trade-off is low flexibility: elongation at break is just 1.8% in XY. To understand what carbon fiber actually adds to a filament, check out our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-con-fibra-de-carbono-guia-completa\"\u003ecomplete carbon fiber filament guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd\u003e250–270 °C (product page); 260–280 °C (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e65–85 °C (product page); 100–120 °C (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Surface\u003c\/td\u003e\n\u003ctd\u003ePEI or glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003e≥ 0.6 mm, ruby or hardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Speed\u003c\/td\u003e\n\u003ctd\u003e30–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.050 mm (1.75) \/ ±0.075 mm (2.85)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (dry \/ conditioned)\u003c\/td\u003e\n\u003ctd\u003e145 °C \/ 128 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd\u003e234 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength XY \/ ZX\u003c\/td\u003e\n\u003ctd\u003e103.2 MPa \/ 18.2 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus XY \/ ZX\u003c\/td\u003e\n\u003ctd\u003e8,258 MPa \/ 2,715 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShore D Hardness\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry for 4–16 hours at 80 °C in a filament dryer or vacuum oven. The manufacturer strongly recommends keeping it dry at all times.\u003c\/li\u003e\n\u003cli\u003eThe product page and technical datasheet list different temperature ranges. Start with the official profile for your printer and fine-tune from there.\u003c\/li\u003e\n\u003cli\u003eFor supports, you can use the same material, Ultrafuse BVOH (water-soluble), or HIPS.\u003c\/li\u003e\n\u003cli\u003eLayer adhesion is the weak point (18.2 MPa in ZX vs. 103.2 MPa in XY): orient your parts so that the main load runs along the layer lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eYes. Forward AM requires a hardened steel or ruby nozzle of at least 0.6 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need an enclosed chamber?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer does not specify a chamber temperature requirement. It works on standard FFF printers with a hardened nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the two variants?\u003c\/strong\u003e\u003cbr\u003eOnly the diameter: 1.75 mm or 2.85 mm. The material, color, and 750 g spool are identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much heat can it handle?\u003c\/strong\u003e\u003cbr\u003eHDT of 145 °C at 0.45 MPa dry and 128 °C conditioned. Forward AM rates it for continuous use up to 150 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it prone to moisture absorption?\u003c\/strong\u003e\u003cbr\u003eLess so than standard nylon, according to the manufacturer, but it still needs to be dried at 80 °C. Check out our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it ESD-safe?\u003c\/strong\u003e\u003cbr\u003eYes, it is ESD-safe with a surface resistivity of 10^5 to 10^11 Ω.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it flexible?\u003c\/strong\u003e\u003cbr\u003eNo. It is very rigid and has low elasticity: 1.8% elongation at break in XY.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of nylon is it?\u003c\/strong\u003e\u003cbr\u003eForward AM classifies it as a high-temperature polyamide (PAHT). Learn more about nylon filament in \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-de-nylon-propiedades-y-cuando-usarlo\"\u003ethis guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Ultrafuse","offers":[{"title":"1,75 mm \/ 750 g \/ Negro","offer_id":55213586153809,"sku":"PAHT-4500a075","price":89.59,"currency_code":"EUR","in_stock":true},{"title":"2,85 mm \/ 750 g \/ Negro","offer_id":55213586186577,"sku":"PAHT-4500b075","price":89.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/ultrafuse-paht-cf15-filamento-1.jpg?v=1791386749"},{"product_id":"ultrafuse-pc-abs-fr-filamento","title":"Ultrafuse PC\/ABS FR - Flame Retardant PC\/ABS Filament 1.75mm 750g","description":"\u003ch2\u003eUltrafuse PC\/ABS FR: Flame-Retardant Enclosures and Electrical Components (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eUltrafuse PC\/ABS FR is a halogen-free, flame-retardant polycarbonate\/ABS blend from BASF and Forward AM. It's my go-to recommendation when someone needs an electronics enclosure that meets UL 94 V-0 without stepping up to 400 °C materials. It combines PC's mechanical strength with ABS's more manageable printing temperatures — though you'll still need an enclosed printer to get reliable results.\u003c\/p\u003e\n\u003ch3\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHalogen-free flame-retardant PC\/ABS blend, black.\u003c\/li\u003e\n\u003cli\u003eUL 94 V-0 rated at 1.5 mm and 3.0 mm wall thickness, per the Forward AM datasheet.\u003c\/li\u003e\n\u003cli\u003eRailway certification EN 45545-2:2016, R26 HL1-3, at 1.5 mm and 3.0 mm.\u003c\/li\u003e\n\u003cli\u003eNozzle 260–280 °C, bed 90–110 °C, enclosed build chamber required.\u003c\/li\u003e\n\u003cli\u003e750 g spool, 1.75 mm diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill my printer handle it?\u003c\/h3\u003e\n\u003cp\u003eIf your printer is enclosed, reaches 280 °C at the nozzle, and 110 °C at the bed, yes. Forward AM requires a passively heated enclosure — meaning the heated bed warms the chamber air — active chamber heating is not necessary. Open-frame printers will struggle with warping and poor layer adhesion. Official profiles are available for Prusa, BCN3D, Intamsys, and Ultimaker, plus high-speed profiles for Bambu Lab and Raise3D. A standard 0.4 mm nozzle works fine since this filament contains no fiber fill.\u003c\/p\u003e\n\u003ch3\u003eWhat does the V-0 rating actually cover?\u003c\/h3\u003e\n\u003cp\u003eThe datasheet certifies UL 94 V-0 at 1.5 mm and 3.0 mm, glow-wire end-product test (GWEPT) at 725 °C for 1.5 mm and 960 °C for 3.0 mm, and EN 45545-2 R26 HL1-3 at those same thicknesses. These are material-level test results at specific wall thicknesses. If your parts have thinner walls or need to pass formal certification, testing the finished part is your responsibility. Forward AM lists typical applications as Raspberry Pi enclosures, plugs and connectors, portable device housings, power tool casings, and automotive components.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e260–280 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e90–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild chamber\u003c\/td\u003e\n\u003ctd\u003eEnclosed, passive heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed surface\u003c\/td\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle size\u003c\/td\u003e\n\u003ctd\u003e≥ 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e30–50 mm\/s (TDS); up to 350 mm\/s with high-speed profiles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinted part density\u003c\/td\u003e\n\u003ctd\u003e1,167 kg\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 1.8 \/ 0.45 MPa\u003c\/td\u003e\n\u003ctd\u003e79 °C \/ 86 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass transition temperature\u003c\/td\u003e\n\u003ctd\u003e94 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength XY \/ ZX\u003c\/td\u003e\n\u003ctd\u003e50.1 MPa \/ 17.3 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched Izod impact XY \/ ZX\u003c\/td\u003e\n\u003ctd\u003e16.8 kJ\/m² \/ 1.8 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric strength XY\u003c\/td\u003e\n\u003ctd\u003e33 kV\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry for 4–16 hours at 60 °C in a filament dryer or vacuum oven, as recommended by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eThink about layer orientation when positioning your parts: tensile strength drops from 50.1 MPa (XY) to 17.3 MPa in the vertical (ZX) direction.\u003c\/li\u003e\n\u003cli\u003eFor high-speed printing, Forward AM notes that nozzle temperature may need to be increased. Their high-speed tests use a 0.4 mm nozzle and 0.2 mm layer height.\u003c\/li\u003e\n\u003cli\u003ePrint in a ventilated space or use fume extraction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it fireproof?\u003c\/strong\u003e\u003cbr\u003eIt's flame retardant, not fireproof: it meets UL 94 V-0 at 1.5 mm and 3.0 mm per Forward AM's datasheet. This does not mean it won't burn under all conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it halogen-free?\u003c\/strong\u003e\u003cbr\u003eYes, the manufacturer states the flame retardant system is halogen-free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eNo. This filament contains no fiber fill. Forward AM specifies a 0.4 mm or larger nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I print it on an open-frame printer?\u003c\/strong\u003e\u003cbr\u003eI wouldn't recommend it. The manufacturer requires an enclosed chamber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eAccording to the datasheet, the HDT is 86 °C at 0.45 MPa and the glass transition temperature is 94 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for railway applications?\u003c\/strong\u003e\u003cbr\u003eYes, it carries EN 45545-2:2016 R26 HL1-3 certification at 1.5 and 3.0 mm. Approval for any specific part depends on the individual project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need to be dried?\u003c\/strong\u003e\u003cbr\u003eYes, at 60 °C for 4 to 16 hours. You can find suitable options in our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this product reference include?\u003c\/strong\u003e\u003cbr\u003ePC-4718a075: 1.75 mm, 750 g spool, black. Discover more engineering materials in our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Ultrafuse","offers":[{"title":"Default Title","offer_id":55213586514257,"sku":"PC-4718a075","price":59.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/ultrafuse-pc-abs-fr-filamento-1.jpg?v=1791386753"},{"product_id":"ultrafuse-ppsu-filamento","title":"Ultrafuse PPSU - PPSU Filament 1.75mm 750g","description":"\u003ch2\u003eUltrafuse PPSU: Parts That Withstand 180 °C Continuous Use (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eUltrafuse PPSU is a polyphenylsulfone filament from BASF, developed by Forward AM using their Ultrason resin technology. It sits a step above PC, PA, or POM: Forward AM rates it for peaks up to 220 °C and continuous service at 180 °C, with self-extinguishing UL 94 V-0 certification and autoclave sterilization compatibility. Before purchasing, make sure your printer can actually handle what this filament demands — it is not a desktop printer material.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: polyphenylsulfone (PPSU), natural amber color — described as yellow\/brown in the datasheet.\u003c\/li\u003e\n\u003cli\u003eNozzle: 390–410 °C, bed: 220 °C, actively heated enclosure: 170–210 °C.\u003c\/li\u003e\n\u003cli\u003eHDT of 215 °C at 0.45 MPa and glass transition temperature of 222 °C (TDS v2.0).\u003c\/li\u003e\n\u003cli\u003eUL 94 V-0 rated at both 1.5 mm and 3.0 mm thickness, per the manufacturer.\u003c\/li\u003e\n\u003cli\u003e750 g spool, 1.75 mm diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan My Printer Handle This?\u003c\/h3\u003e\n\u003cp\u003eAlmost certainly not, if you're using a desktop printer. Forward AM requires a nozzle temperature of 390–410 °C, a bed temperature of 220 °C, and an actively heated enclosure running at 170–210 °C. A standard enclosed printer won't reach those numbers — having a shell around the print area isn't enough; the chamber needs real active heating. This is a material for high-temperature industrial machines, and Forward AM only publishes a print profile for Intamsys printers. If your setup doesn't meet all three requirements, check out our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments\u003c\/a\u003e instead — there are options that work well on conventional enclosed printers.\u003c\/p\u003e\n\u003ch3\u003eWhat Is PPSU Used For?\u003c\/h3\u003e\n\u003cp\u003eForward AM designed this filament for parts that live in high-temperature environments: aerospace and railway components, parts that go through autoclave sterilization at 134 °C with steam, and applications involving continuous contact with hot water, coolants, oils up to 170 °C, fuels, or dishwasher detergents. It is also recommended as a support material for PEI-based filaments such as ULTEM 9085. The flammability data includes passed FAR 25.853 testing (aerospace) at the specified thicknesses, as well as compliance with railway standard EN 45545-2.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd\u003e390–410 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e220 °C (TDS); 200–220 °C per product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Temperature\u003c\/td\u003e\n\u003ctd\u003e170–210 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Surface\u003c\/td\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Size\u003c\/td\u003e\n\u003ctd\u003e≥ 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Speed\u003c\/td\u003e\n\u003ctd\u003e25–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinted Part Density\u003c\/td\u003e\n\u003ctd\u003e1272 kg\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 1.8 \/ 0.45 MPa\u003c\/td\u003e\n\u003ctd\u003e211 °C \/ 215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength XY \/ ZX\u003c\/td\u003e\n\u003ctd\u003e74.5 MPa \/ 49.0 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus XY \/ ZX\u003c\/td\u003e\n\u003ctd\u003e1940 MPa \/ 1700 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability Rating\u003c\/td\u003e\n\u003ctd\u003eUL 94 V-0 at 1.5 mm and 3.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlow Wire (GWEPT)\u003c\/td\u003e\n\u003ctd\u003e960 °C at 1.5 mm and 3.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways dry before printing: the manufacturer specifies a vacuum dryer at 125 °C for 8 hours.\u003c\/li\u003e\n\u003cli\u003eKeep the spool in a sealed container during printing. Bubbles in the melt are a sign of moisture.\u003c\/li\u003e\n\u003cli\u003ePrint on glass. Forward AM notes that Vision Miner's Nano Polymer adhesive improves bed adhesion.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated space or with active fume extraction, as recommended in the safety datasheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature can an Ultrafuse PPSU part handle?\u003c\/strong\u003e\u003cbr\u003eAccording to Forward AM, up to 220 °C for short exposures and 180 °C for continuous service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a heated enclosure?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer requires 170–210 °C inside the print chamber, which only high-temperature industrial machines can achieve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it flame retardant?\u003c\/strong\u003e\u003cbr\u003eIt is inherently flame retardant, with a UL 94 V-0 rating at 1.5 and 3.0 mm wall thickness per the datasheet. That rating applies to the material tested at those specific thicknesses; you are responsible for validating your final part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be autoclave sterilized?\u003c\/strong\u003e\u003cbr\u003eForward AM states it is compatible with steam autoclave sterilization at 134 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states it is produced using food-contact-approved raw materials, but the datasheet clarifies that the filament is not FDA approved. For food contact applications, consult your specific use case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy isn't it transparent?\u003c\/strong\u003e\u003cbr\u003eIts natural color is amber — yellow\/brown — as stated by the manufacturer. This is normal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should it be dried?\u003c\/strong\u003e\u003cbr\u003eIn a vacuum dryer at 125 °C for 8 hours. Most desktop \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e do not reach that temperature, so check yours before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat diameter and weight does it come in?\u003c\/strong\u003e\u003cbr\u003eThis variant (PPSU-4430a075) is 1.75 mm diameter on a 750 g spool.\u003c\/p\u003e","brand":"Ultrafuse","offers":[{"title":"Default Title","offer_id":55213587005777,"sku":"PPSU-4430a075","price":298.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/ultrafuse-ppsu-filamento-1.jpg?v=1791386758"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/collections\/anycubic-asa-filament-negro-asa-oficial.jpg?v=1791305866","url":"https:\/\/mrresin.es\/en\/collections\/technical-filaments.oembed","provider":"Mr Resin","version":"1.0","type":"link"}