{"title":"3D Transparent Resin for 3D Printing","description":"\u003cp data-start=\"0\" data-end=\"246\"\u003e\u003cmeta charset=\"utf-8\"\u003e💎\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eLooking for clear 3D printer resin that delivers crystal-clear finishes and maximum detail?\u003c\/p\u003e\n\u003cp data-start=\"0\" data-end=\"246\"\u003eAt MR Resin, you'll find the best selection of transparent 3D printing resin, perfect for achieving professional results and parts with superior optical clarity.\u003c\/p\u003e","products":[{"product_id":"resina-anycubic-standard-v1","title":"🔥1Kg Standard Resin V1 by Anycubic, Standard Resin!🔥","description":"\u003ch2\u003e\n\u003cstrong\u003eStandard \u003cmeta charset=\"utf-8\"\u003eResin V1 \u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003cstrong\u003eby \u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003cstrong\u003eAnycubic\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe Anycubic Standard Resin V1 1Kg is the ideal option for beginners and pros in UV printing who are looking for high detail.\u003c\/p\u003e\n\u003ch2\u003e🔥\u003cstrong\u003eThe classic Anycubic standard resin, as always!🔥\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eIts classic formula offers high precision, hardness and fluidity, achieving resistant models and reducing printing time while surpassing expectations over other 8K resins.\u003c\/p\u003e\n\u003cp\u003eAdditionally, its strong adhesion makes separation easier after formation.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003e Maximize printing efficiency with the Standard Resin \u003cmeta charset=\"utf-8\"\u003eV1!\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eAnycubic Standard Resin V1 \/ V1 standard resin by Anycubic! Available in the following colors: Black, grey, white, beige and transparent!\u003cspan\u003e💯\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca rel=\"noopener\" title=\"Mr Resin Telegram\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003e\u003cbr\u003e\u003cimg height=\"256\" width=\"252\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/Mr_Resin_logo.png?v=1720643774\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Mr Resin Telegram channel\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003e\u003cstrong\u003eFind us on Telegram @MrResin3D\u003c\/strong\u003e\u003c\/a\u003e to take part in our giveaways and get the best deals on the market for 3D printing materials🔥\u003c\/p\u003e\n\u003cp\u003eDon't miss out on this incredible deal!!!! Get the Anycubic Standard Resin V2 on sale now.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003e\u003cmeta charset=\"utf-8\"\u003eDon't miss out on this incredible deal!!!! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with all Anycubic 3D printers: \u003cbr\u003e\u003c\/span\u003ePhoton Mono M7 Pro, Photon Mono M5s Pro, Photon Mono M5s, Photon Mono M5, Photon M3 Max, Photon Mono X 6Ks, Photon Mono X2, Photon Mono 2, Photon D2, Photon M3 Plus, Photon M3, Photon M3 Premium, Photon Ultra\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e, Photon Mono X, \u003c\/span\u003ePhoton Mono 4K, Photon Mono X 6K, Photon Mono SO, Photon Mono SE, Photon Mono, Photon S\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAlso compatible with 3D printers from other brands such as: Elegoo, Phrozen, Uniformation, etc. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAll perishable products, such as resins, are always shipped with the maximum possible validity period to ensure proper use. However, the remaining period may vary from several months to weeks, depending on the batch available at the time of the order and stock rotation.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis product contains photosensitive resin. Use with gloves, a mask, adequate protection and in a well-ventilated area. Do not ingest. See the safety data sheet on the manufacturer's website.\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003c!----\u003e\u003c!----\u003e","brand":"Anycubic","offers":[{"title":"Grey V1","offer_id":48998565216593,"sku":"SPTGY-10","price":16.39,"currency_code":"EUR","in_stock":true},{"title":"White V1","offer_id":48998565282129,"sku":"SPTWH","price":16.39,"currency_code":"EUR","in_stock":false},{"title":"Black V1","offer_id":48998565249361,"sku":"SPTBK","price":16.39,"currency_code":"EUR","in_stock":true},{"title":"Beige V1","offer_id":48998565314897,"sku":"G2630'SPTLB'104D","price":16.39,"currency_code":"EUR","in_stock":true},{"title":"Translucent V1","offer_id":48998565380433,"sku":"SPTCL","price":16.39,"currency_code":"EUR","in_stock":true},{"title":"Translucent Green V1","offer_id":48998565347665,"sku":"","price":16.39,"currency_code":"EUR","in_stock":true},{"title":"Translucent Red V1","offer_id":49854312644945,"sku":null,"price":16.39,"currency_code":"EUR","in_stock":true},{"title":"Translucent Blue V1","offer_id":49854312677713,"sku":null,"price":16.39,"currency_code":"EUR","in_stock":true},{"title":"Purple V1","offer_id":50824358396241,"sku":"SPTPU","price":16.39,"currency_code":"EUR","in_stock":true},{"title":"Blue V1","offer_id":49896867627345,"sku":null,"price":15.69,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/MrResinAnycubicStandardResinV1.jpg?v=1724967146"},{"product_id":"resina-anycubic-standard-v2","title":"Anycubic Standard V2 Resin — Universal 3D resin for 405 nm printers","description":"\u003cdiv style=\"max-width: 100%; width: 100%;\"\u003e\n\u003cp style=\"max-width: 100%;\"\u003e\u003cstrong\u003eAnycubic Standard Resin V2\u003c\/strong\u003e is a 405 nm photopolymer resin for LCD\/DLP 3D printers with 93% more toughness than V1, 80-83 Shore D hardness and a typical exposure time of 2-3 s. \u003cstrong\u003eIdeal for miniatures, functional prototypes and decorative figures.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"max-width: 100%;\"\u003eAnycubic Standard Resin V2 is, without a doubt, the resin we would put in the tank if we could only choose one. It performs print after print, with stunning detail and short times that let you dial in your settings in an afternoon. 🎯\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eWhy buy Anycubic Standard Resin V2 at Mr Resin\u003c\/h2\u003e\n\u003cul style=\"max-width: 100%;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOfficial Anycubic distributor in Spain\u003c\/strong\u003e with after-sales technical support in Spanish.\u003c\/li\u003e\n\u003cli\u003eMore than \u003cstrong\u003e5,000 makers served\u003c\/strong\u003e since 2022.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping in 24 h\u003c\/strong\u003e from our warehouse in Barcelona.\u003c\/li\u003e\n\u003cli\u003eBuy with confidence: check the reviews from other makers further down this page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e🤔 Standard V2 vs other resins: when to choose which\u003c\/h2\u003e\n\u003cp style=\"max-width: 100%;\"\u003eIf you are comparing Anycubic Standard Resin V2 with other options from the \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas-3d-anycubic\" title=\"View all Anycubic resins at Mr Resin\"\u003eAnycubic resin catalog\u003c\/a\u003e, this table helps you decide quickly:\u003c\/p\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComparison\u003c\/th\u003e\n\u003cth\u003eChoose Standard V2 if…\u003c\/th\u003e\n\u003cth\u003eConsider the other if…\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eV2 vs Standard V1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYou want less brittle parts (+93% toughness) and less odor\u003c\/td\u003e\n\u003ctd\u003eYou prioritize price per kg and already have the V1 settings dialed in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eV2 vs Water-Wash 2.0\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYou are looking for maximum fine detail and better mechanical properties\u003c\/td\u003e\n\u003ctd\u003eYou do not want to work with \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/guia-completa-sobre-el-uso-del-alcohol-isopropilico-en-la-impresion-3d-con-resina\" title=\"Isopropyl alcohol guide for resin 3D printing\"\u003eisopropyl alcohol\u003c\/a\u003e (washing with water)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eV2 vs Tough Resin 2.0\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrototypes, figures and standard decorative parts\u003c\/td\u003e\n\u003ctd\u003eFunctional parts under continuous load or that need to flex a lot without breaking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"max-width: 100%;\"\u003eNot sure which resin to choose? Explore all the \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas\" title=\"Buy resins for 3D printers\"\u003eresins for 3D printers available at Mr Resin\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e✅ Why the Anycubic Standard V2 Resin is our best-selling resin\u003c\/h2\u003e\n\u003cul style=\"max-width: 100%;\"\u003e\n\u003cli\u003e💪 \u003cstrong\u003e+93% toughness compared to V1\u003c\/strong\u003e — elongation at break 25-30% (V1 is around 14%). More impact-resistant parts, less brittle, same precision.\u003c\/li\u003e\n\u003cli\u003e🔍 \u003cstrong\u003eIncredible detail\u003c\/strong\u003e — hardness 80-83 Shore D and volumetric shrinkage 4.3-5.6% for miniatures, figures and prototypes where every layer counts.\u003c\/li\u003e\n\u003cli\u003e💧 \u003cstrong\u003eFlows beautifully\u003c\/strong\u003e — viscosity 250-350 mPa·s at 25 °C, settles well in the vat without bubbles or problems filling the FEP.\u003c\/li\u003e\n\u003cli\u003e😌 \u003cstrong\u003eLess odour than V1\u003c\/strong\u003e — reformulated formula for more comfortable sessions in small spaces.\u003c\/li\u003e\n\u003cli\u003e🖨️ \u003cstrong\u003eCompatible with any 405 nm LCD\/DLP\u003c\/strong\u003e — the entire Anycubic Photon range and the vast majority of Elegoo, Phrozen and Creality printers.\u003c\/li\u003e\n\u003cli\u003e🎨 \u003cstrong\u003eHassle-free post-processing\u003c\/strong\u003e — sands, paints and bonds without issues once cured.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e📋 Technical specifications of the Anycubic Standard V2 Resin\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUV photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCuring wavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e365-405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMSLA \/ LCD \/ DLP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eViscosity (25 °C)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e250-350 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.05-1.25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80-83 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTensile strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35-45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElongation at break\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-30%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpact resistance (Izod)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e192 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eYoung's modulus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,200-1,400 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolumetric shrinkage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.3-5.6%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended layer height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNormal exposure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5-3 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFirst layer exposure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20-40 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinting temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20-35 °C (optimal) \/ 20-50 °C (range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWashing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIsopropyl alcohol ≥95%, ≥3 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUV curing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 min at 405 nm (intensity 25,000-30,000 µW\/cm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShelf life unopened\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 months (15-30 °C, away from direct light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 kg bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e⚙️ Recommended settings for the Anycubic Standard V2 Resin by printer\u003c\/h2\u003e\n\u003cp style=\"max-width: 100%;\"\u003eOfficial Anycubic values for layer height \u003cstrong\u003e0.05 mm\u003c\/strong\u003e and anti-aliasing level \u003cstrong\u003e1\u003c\/strong\u003e. If you print at 0.1 mm, multiply the exposure times by approximately 1.5-2x and validate with a calibration test. You can also check the \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/parametros-de-resinas-anycubic-y-impresoras-anycubic\" title=\"All Anycubic resin settings\"\u003ecomplete settings for all Anycubic resins\u003c\/a\u003e on our blog.\u003c\/p\u003e\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter model\u003c\/th\u003e\n\u003cth\u003eNormal exposure\u003c\/th\u003e\n\u003cth\u003eFirst layer exposure\u003c\/th\u003e\n\u003cth\u003eBase layers\u003c\/th\u003e\n\u003cth\u003eZ Lift\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton P1\u003c\/td\u003e\n\u003ctd\u003e2 s\u003c\/td\u003e\n\u003ctd\u003e20 s\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono M7\u003c\/td\u003e\n\u003ctd\u003e2.2 s\u003c\/td\u003e\n\u003ctd\u003e25 s\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono M7 Pro\u003c\/td\u003e\n\u003ctd\u003e1.8 s\u003c\/td\u003e\n\u003ctd\u003e25 s\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono M7 Max\u003c\/td\u003e\n\u003ctd\u003e2 s\u003c\/td\u003e\n\u003ctd\u003e30 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono M5\u003c\/td\u003e\n\u003ctd\u003e2.8 s\u003c\/td\u003e\n\u003ctd\u003e25 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono M5s\u003c\/td\u003e\n\u003ctd\u003e2.8 s\u003c\/td\u003e\n\u003ctd\u003e25 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono M5s Pro\u003c\/td\u003e\n\u003ctd\u003e3.6 s\u003c\/td\u003e\n\u003ctd\u003e30 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono 4\u003c\/td\u003e\n\u003ctd\u003e2.8 s\u003c\/td\u003e\n\u003ctd\u003e30 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono 4K\u003c\/td\u003e\n\u003ctd\u003e2 s\u003c\/td\u003e\n\u003ctd\u003e40 s\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono 4 Ultra\u003c\/td\u003e\n\u003ctd\u003e2.6 s\u003c\/td\u003e\n\u003ctd\u003e30 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono 2\u003c\/td\u003e\n\u003ctd\u003e2.5 s\u003c\/td\u003e\n\u003ctd\u003e25 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono X2\u003c\/td\u003e\n\u003ctd\u003e2.5 s\u003c\/td\u003e\n\u003ctd\u003e20 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono X 6K\u003c\/td\u003e\n\u003ctd\u003e2 s\u003c\/td\u003e\n\u003ctd\u003e25 s\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton Mono X6Ks\u003c\/td\u003e\n\u003ctd\u003e2.5 s\u003c\/td\u003e\n\u003ctd\u003e20 s\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton M3 Max\u003c\/td\u003e\n\u003ctd\u003e3 s\u003c\/td\u003e\n\u003ctd\u003e35 s\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhoton M3 Premium\u003c\/td\u003e\n\u003ctd\u003e2.5 s\u003c\/td\u003e\n\u003ctd\u003e25 s\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e🚀 How to use Anycubic Standard V2 Resin step by step\u003c\/h2\u003e\n\u003col style=\"max-width: 100%;\"\u003e\n\u003cli\u003e🔀 Shake the bottle well for 30-60 seconds before pouring.\u003c\/li\u003e\n\u003cli\u003e🧪 Pour into the vat without exceeding the maximum line.\u003c\/li\u003e\n\u003cli\u003e⚙️ Set the exposure times according to the table above for your printer model.\u003c\/li\u003e\n\u003cli\u003e🧼 Wash the parts in \u003ca href=\"https:\/\/mrresin.es\/products\/alcohol-isopropilico-puro-99-9-propanol\" title=\"Buy 99.9% isopropyl alcohol at Mr Resin\"\u003eisopropyl alcohol ≥95%\u003c\/a\u003e for ≥3 minutes.\u003c\/li\u003e\n\u003cli\u003e☀️ Cure with 405 nm UV light for 3 minutes per side (adjust according to thickness).\u003c\/li\u003e\n\u003cli\u003e🗑️ Already cured resin is disposed of as plastic waste.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e❓ Frequently asked questions about Anycubic Standard V2 Resin\u003c\/h2\u003e\n\u003ch3\u003eWhat is the real difference between Anycubic Standard V1 and V2?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eAnycubic Standard V2 Resin increases toughness by 93% (elongation at break 25-30% vs ~14% for V1), significantly reduces odour and lowers volumetric shrinkage to 4.3-5.6%. The exposure settings are practically interchangeable.\u003c\/p\u003e\n\u003ch3\u003eWhich 3D printers is Anycubic Standard V2 Resin compatible with?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eCompatible with any 405 nm LCD, MSLA or DLP 3D printer. Tested and documented across the full Anycubic Photon range (Mono, M3, M5, M7, X), and works perfectly with compatible Elegoo, Phrozen and Creality models.\u003c\/p\u003e\n\u003ch3\u003eWhat exposure time should I use?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eBetween 2 and 3.6 seconds depending on the model (see the settings table above). For 4K+ LCD start at 2.5 s; for 2K at 3 s. Always validate with a calibration test (Cones of Calibration or AmeraLabs Town).\u003c\/p\u003e\n\u003ch3\u003eHow do I wash and cure correctly?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eWashing in \u003ca href=\"https:\/\/mrresin.es\/products\/alcohol-isopropilico-puro-99-9-propanol\" title=\"Buy isopropyl alcohol at Mr Resin\"\u003eisopropyl alcohol ≥95%\u003c\/a\u003e for at least 3 minutes (ideally in a Wash \u0026amp; Cure station). Air dry or use a blower. UV curing at 405 nm for 3 minutes per side, at a temperature of 18-30 °C.\u003c\/p\u003e\u003ch3\u003eIs it toxic? What precautions do I need?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eLike all uncured UV resin, it requires nitrile gloves, a mask, and ventilation. Once fully cured, it is chemically inert and can be handled without protection. Do not ingest or pour down drains.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for dental printing or jewelry?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eNo. For dental use, you need certified biocompatible resins (Class I\/IIa). For jewelry, specific castable resins with low ash content are required. The Anycubic Standard V2 Resin is a general-purpose resin.\u003c\/p\u003e\n\u003ch3\u003eCan I mix colors from the same range?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eYes, no problem. Mixing two colors of Anycubic Standard V2 gives consistent results and does not affect exposure times. Mixing with resins from other brands is possible but usually requires recalibration.\u003c\/p\u003e\n\u003ch3\u003eHow long does an opened bottle last?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eApproximately 12 months when kept tightly sealed, between 15 and 30 °C and away from direct sunlight. Always shake for 30-60 seconds before each use to remix settled pigments.\u003c\/p\u003e\n\u003ch3\u003eWhere can I find the exact settings for my 3D printer?\u003c\/h3\u003e\n\u003cp style=\"max-width: 100%;\"\u003eIn the \"Recommended Settings\" table above, you will find the 16 official Anycubic models. For settings for all Anycubic resins (not just the Standard V2), check our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/parametros-de-resinas-anycubic-y-impresoras-anycubic\" title=\"Settings for all Anycubic resins\"\u003ecomplete Anycubic settings guide\u003c\/a\u003e. For other brands, start from the values of an equivalent model and adjust using a calibration test.\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e⚠️ Safety and expiry\u003c\/h2\u003e\n\u003cp style=\"max-width: 100%;\"\u003e🧤 This product contains photosensitive resin. Always use with gloves, a mask, and in a well-ventilated area. Do not ingest. Refer to the safety data sheet (MSDS) on the manufacturer's website.\u003c\/p\u003e\n\u003cp style=\"max-width: 100%;\"\u003e📦 All perishable products are shipped with the maximum possible remaining validity. The remaining period may vary depending on the available batch and stock rotation.\u003c\/p\u003e\n\u003cp style=\"max-width: 100%;\"\u003e💬 Do you have questions about which Anycubic resin to choose for your project? Join our \u003ca href=\"https:\/\/t.me\/MrResin3D\"\u003eTelegram community\u003c\/a\u003e — we help you choose and you can take part in exclusive giveaways. 🎁\u003c\/p\u003e\n\u003cp style=\"max-width: 100%;\"\u003e✨ Happy Printing! 🚀\u003c\/p\u003e\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"@id\": \"https:\/\/mrresin.es\/products\/resina-anycubic-standard-v2#faq\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the real difference between Anycubic Standard V1 and V2?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Anycubic Standard V2 resin increases toughness by 93% (elongation at break 25-30% vs ~14% for V1), noticeably reduces odor and lowers volumetric shrinkage to 4.3-5.6%. The exposure settings are practically interchangeable.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which 3D printers is the Anycubic Standard V2 resin compatible with?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"With any 405 nm LCD, MSLA or DLP 3D printer. Tested and documented across the entire Anycubic Photon range (Mono, M3, M5, M7, X), and works perfectly on compatible Elegoo, Phrozen and Creality models.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What exposure time should I use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Between 2 and 3.6 seconds depending on the model (see the settings table above). For 4K+ LCD start at 2.5 s; for 2K at 3 s. Always validate with a calibration test (Cones of Calibration or AmeraLabs Town).\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I wash and cure correctly?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Washing in isopropyl alcohol ≥95% for at least 3 minutes (ideally in a Wash \u0026 Cure station). Air dry or use a blower. UV 405 nm curing for 3 minutes per side, at a temperature of 18-30 °C.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is it toxic? What precautions do I need?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Like all uncured UV resin, it requires nitrile gloves, a mask and ventilation. Once fully cured it is chemically inert and can be handled without protection. Do not ingest or pour down drains.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is it suitable for dental printing or jewelry?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. For dental use you need certified biocompatible resins (Class I\/IIa). For jewelry, specific castable resins with low ash content. The Anycubic Standard V2 resin is general purpose.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I mix colors from the same range?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, no problem. Mixing two colors of Anycubic Standard V2 resin gives consistent results and does not alter the exposure times. With resins from other brands it is possible but usually requires recalibration.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long does a bottle last once opened?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Approximately 12 months when kept tightly sealed, between 15 and 30 °C and away from direct sunlight. Always shake for 30-60 seconds before each use to re-mix settled pigments.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Where can I find the exact settings for my 3D printer?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"In the \\\"Recommended settings\\\" table above you will find the 16 official Anycubic models. For settings for all Anycubic resins (not just the Standard V2), check our complete Anycubic settings guide on the Mr Resin blog. For other brands, start from the values of an equivalent model and adjust with a calibration test.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Anycubic","offers":[{"title":"Gris V2","offer_id":50824479998289,"sku":"SBZ2GY","price":17.12,"currency_code":"EUR","in_stock":true},{"title":"Black V2","offer_id":50824480031057,"sku":"SBZ2BK","price":17.34,"currency_code":"EUR","in_stock":true},{"title":"White V2","offer_id":50824480063825,"sku":"SBZ2WH","price":17.32,"currency_code":"EUR","in_stock":false},{"title":"Beige V2","offer_id":50824480162129,"sku":"SBZ2BG","price":17.48,"currency_code":"EUR","in_stock":false},{"title":"Translucent V2","offer_id":50824480096593,"sku":"SBZ2CL","price":17.32,"currency_code":"EUR","in_stock":false},{"title":"Translucent Green V2","offer_id":50824480129361,"sku":"SBZ2TG","price":17.38,"currency_code":"EUR","in_stock":true},{"title":"Translucent Red V2","offer_id":51038363222353,"sku":"SBZ2TR","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Translucent Blue V2","offer_id":51038363255121,"sku":"SBZ2TB","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Purple V2","offer_id":50824480227665,"sku":"SBZ2PU","price":16.14,"currency_code":"EUR","in_stock":false},{"title":"Blue V2","offer_id":50824480194897,"sku":"SBZ2BL","price":17.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/MrResinAnycubicStandardResinV22.jpg?v=1724967113"},{"product_id":"resina-anycubic-high-clear","title":"🔥1Kg High Clear Resin, Anycubic High Transparency Resin🔥","description":"\u003ch2\u003e\n\u003cstrong\u003eAnycubic \u003c\/strong\u003e\u003cstrong\u003eHigh Clear High Transparency Resin\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eGive your prints a detailed and glossy surface.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eTransparent prints without yellowing!🔥\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eIts optimized formula ensures high transparency and yellowing resistance, keeping your prints crystal clear indoors.\u003c\/p\u003e\n\u003cp\u003eIn addition, its high elasticity increases the durability of your creations. High-quality prints with the Anycubic High Speed Resin!\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003e Maximize print transparency with the Anycubic High Clear resin!\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Mr Resin Telegram\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003e\u003cimg height=\"256\" width=\"252\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/Mr_Resin_logo.png?v=1720643774\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Mr Resin Telegram channel\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003e\u003cstrong\u003eFind us on Telegram @MrResin3D\u003c\/strong\u003e\u003c\/a\u003e to take part in our giveaways and get the best deals on the market for 3D printing materials🔥\u003c\/p\u003e\n\u003cp\u003eDon't miss this incredible deal!!!! Get the \u003cmeta charset=\"utf-8\"\u003eAnycubic High Clear high transparency resin on sale now.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003e\u003cmeta charset=\"utf-8\"\u003eDon't miss this incredible deal!!!! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with all Anycubic 3D printers: \u003cbr\u003e\u003c\/span\u003ePhoton Mono M7 Pro, Photon Mono M5s Pro, Photon Mono M5s, Photon Mono M5, Photon M3 Max, Photon Mono X 6Ks, Photon Mono X2, Photon Mono 2, Photon D2, Photon M3 Plus, Photon M3, Photon M3 Premium, Photon Ultra\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e, Photon Mono X, \u003c\/span\u003ePhoton Mono 4K, Photon Mono X 6K, Photon Mono SO, Photon Mono SE, Photon Mono, Photon S\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAlso compatible with 3D printers from other brands such as: Elegoo, Phrozen, Uniformation, etc. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eTags: resin 3d, 3d printing resin, 3D printing, 3d resin printing, anycubic 3d, anycubic resin, photon, photon mono, photon mono m5, m5s, elegoo mars, elegoo Saturn, photon m5s, buy cheap anycubic resin, elegoo Saturn 3 ultra, Anycubic M3 Max, anycubic M3 plus, printer resin, photon mono M5, photon mono M5s, buy cheap High Clear resin, Anycubic High Clear resin deal, discount on anycubic high Clear resin\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003c!----\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003eAll perishable products, such as resins, are always shipped with the maximum possible validity period to ensure proper use. However, the remaining period may vary from several months to weeks, depending on the batch available at the time of the order and stock rotation.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis product contains photosensitive resin. Use with gloves, a mask, adequate protection, and in a well-ventilated area. Do not ingest. See the safety data sheet on the manufacturer's website.\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e\u003c!----\u003e","brand":"Anycubic","offers":[{"title":"Default Title","offer_id":49037825507665,"sku":"STMGCL","price":29.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/MrResinAnycubicHighClearResin.jpg?v=1721235882"},{"product_id":"resina-elegoo-standard","title":"🔥ELEGOO Standard Resin🔥","description":"\u003ch2 data-start=\"34\" data-end=\"79\"\u003e🔹 Minimal Shrinkage and Optimal Precision\u003c\/h2\u003e\n\u003cp data-start=\"80\" data-end=\"448\"\u003eThe \u003cstrong data-start=\"83\" data-end=\"114\"\u003eELEGOO Standard Resin\u003c\/strong\u003e has been formulated to drastically reduce volumetric shrinkage (\u003c 1%) during photo-curing, ensuring your 3D printing results maintain the exact dimensions of the digital model. Thanks to its advanced chemistry, you'll achieve ultra-smooth surfaces and sharp details—even the finest engravings and most delicate textures.\u003c\/p\u003e\n\u003ch2 data-start=\"450\" data-end=\"490\"\u003e🌿 Low Odour and Reliable Performance\u003c\/h2\u003e\n\u003cp data-start=\"491\" data-end=\"801\"\u003eUnlike other resins that release strong fumes, the refined Standard formula minimises odour without compromising reactivity or strength. Whether it's a quick prototype or an overnight production run, you'll enjoy consistent layer adhesion and predictable curing times with every print.\u003c\/p\u003e\n\u003ch2 data-start=\"803\" data-end=\"847\"\u003e🔌 Wide Compatibility and Optimal Flow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"850\" data-end=\"998\"\u003e\n\u003cstrong data-start=\"850\" data-end=\"881\"\u003e405 nm LCD \u0026 DLP 3D Printers\u003c\/strong\u003e: Works with the majority of devices on the market, with pre-configured profiles for Photon, Mars, Saturn and more.\u003c\/li\u003e\n\u003cli data-start=\"1001\" data-end=\"1176\"\u003e\n\u003cstrong data-start=\"1001\" data-end=\"1020\"\u003eLow Viscosity\u003c\/strong\u003e: Flows easily into the most demanding details and reduces adhesion to the FEP film, lowering peel force and extending its lifespan.\u003c\/li\u003e\n\u003cli data-start=\"1179\" data-end=\"1315\"\u003e\n\u003cstrong data-start=\"1179\" data-end=\"1205\"\u003eSimple Post-Processing\u003c\/strong\u003e: Wash parts in isopropyl alcohol and cure for 2–4 min under 405 nm UV light to reach maximum hardness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"1317\" data-end=\"1349\"\u003e🚀 Unlimited Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"1352\" data-end=\"1439\"\u003e\n\u003cstrong data-start=\"1352\" data-end=\"1376\"\u003eMiniatures and Figures\u003c\/strong\u003e: Capture facial features and armour with extreme definition.\u003c\/li\u003e\n\u003cli data-start=\"1442\" data-end=\"1538\"\u003e\n\u003cstrong data-start=\"1442\" data-end=\"1462\"\u003eJewellery and Moulds\u003c\/strong\u003e: Produce castable masters or display pieces with an impeccable finish.\u003c\/li\u003e\n\u003cli data-start=\"1541\" data-end=\"1648\"\u003e\n\u003cstrong data-start=\"1541\" data-end=\"1567\"\u003eFunctional Prototypes\u003c\/strong\u003e: Test gears, fits and mechanical components with millimetre precision.\u003c\/li\u003e\n\u003cli data-start=\"1651\" data-end=\"1754\"\u003e\n\u003cstrong data-start=\"1651\" data-end=\"1679\"\u003eArchitectural Modelling\u003c\/strong\u003e: Reproduce facades, windows and landscape reliefs at exact scale.\u003c\/li\u003e\n\u003cli data-start=\"1757\" data-end=\"1867\"\u003e\n\u003cstrong data-start=\"1757\" data-end=\"1783\"\u003eMedical and Dental Sector\u003c\/strong\u003e: Dental models, surgical guides and custom prosthetics with clinical resolution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote data-start=\"1869\" data-end=\"1987\"\u003e\n\u003cp data-start=\"1871\" data-end=\"1987\"\u003e\"With ELEGOO Resin, my parts always come out true to size, with no warping or surprises.\" – Verified Customer\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2 data-start=\"1989\" data-end=\"2018\"\u003e📦 Product Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"2021\" data-end=\"2052\"\u003e\n\u003cstrong data-start=\"2021\" data-end=\"2033\"\u003eFormat:\u003c\/strong\u003e 1 kg per bottle\u003c\/li\u003e\n\u003cli data-start=\"2055\" data-end=\"2085\"\u003e\n\u003cstrong data-start=\"2055\" data-end=\"2076\"\u003eWavelength:\u003c\/strong\u003e 405 nm\u003c\/li\u003e\n\u003cli data-start=\"2088\" data-end=\"2124\"\u003e\n\u003cstrong data-start=\"2088\" data-end=\"2104\"\u003eShrinkage:\u003c\/strong\u003e \u0026lt; 1% volumetric\u003c\/li\u003e\n\u003cli data-start=\"2127\" data-end=\"2164\"\u003e\n\u003cstrong data-start=\"2127\" data-end=\"2142\"\u003eViscosity:\u003c\/strong\u003e 30–50 mPa·s at 25 °C\u003c\/li\u003e\n\u003cli data-start=\"2167\" data-end=\"2213\"\u003e\n\u003cstrong data-start=\"2167\" data-end=\"2198\"\u003eRecommended layer height:\u003c\/strong\u003e 0.02–0.05 mm\u003c\/li\u003e\n\u003cli data-start=\"2216\" data-end=\"2264\"\u003e\n\u003cstrong data-start=\"2216\" data-end=\"2231\"\u003ePost-curing:\u003c\/strong\u003e 2–4 min under 405 nm UV lamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"2266\" data-end=\"2340\"\u003e🚀 Get your ELEGOO Standard Resin now before it sells out!\u003c\/h2\u003e\n\u003cp data-start=\"2341\" data-end=\"2442\"\u003eTake your prints to the next level with pure colors, extreme detail and professional reliability.\u003c\/p\u003e\n\u003cp data-start=\"1500\" data-end=\"1614\"\u003eAll perishable products, such as resins, are always shipped with the maximum possible validity period to ensure correct use. However, the remaining period may vary from several months to weeks, depending on the batch available at the time of the order and stock turnover.\u003c\/p\u003e\n\u003cp data-start=\"1647\" data-end=\"1809\"\u003e\u003cmeta charset=\"utf-8\"\u003eThis product contains photosensitive resin. Use with gloves, a mask, adequate protection and in a well-ventilated area. Do not ingest. See safety data sheet on the manufacturer's website.\u003c\/p\u003e\n\u003cp data-start=\"2341\" data-end=\"2442\"\u003e \u003c\/p\u003e","brand":"Elegoo","offers":[{"title":"Elegoo Standard Grey","offer_id":51255936745809,"sku":"","price":15.42,"currency_code":"EUR","in_stock":false},{"title":"Elegoo Standard Black","offer_id":51937294844241,"sku":null,"price":15.42,"currency_code":"EUR","in_stock":true},{"title":"Elegoo Standard Translucent","offer_id":51937294877009,"sku":null,"price":15.42,"currency_code":"EUR","in_stock":false},{"title":"Elegoo Standard Beige","offer_id":51937294909777,"sku":null,"price":14.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/standard_resin_gris-1kg-Mr-Resin.png?v=1749736430"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/collections\/ColoredUVResin_TranslucentGreen.jpg?v=1773247730","url":"https:\/\/mrresin.es\/en\/collections\/transparent-3d-resins.oembed","provider":"Mr Resin","version":"1.0","type":"link"}