{"product_id":"3dxtech-3dxstat-esd-petg-filamento","title":"3DXTech 3DXSTAT ESD-PETG - ESD PETG Filament 1.75mm 750g \/ 2kg","description":"\u003ch2\u003e3DXTech 3DXSTAT ESD-PETG: Static-Dissipative PETG for Sensitive Electronics (750 g or 2 kg, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003e3DXSTAT ESD-PETG is a PETG filament loaded with multi-walled carbon nanotubes (MWCNT) for effective static dissipation. 3DXTech targets a surface resistance of 10⁴ to 10⁹ ohms — making it the go-to choice for trays, fixtures, and holders that come into contact with PCBs and electronic components. It prints like a standard PETG but at slightly higher temperatures, no heated enclosure required. Available in black, 1.75 mm, on 750 g or 2 kg spools.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESD compound with multi-walled carbon nanotubes (MWCNT).\u003c\/li\u003e\n\u003cli\u003eTarget surface resistance: 10⁴–10⁹ Ω; TDS specifies 10⁷–10⁹ Ω\/sq (ASTM D257).\u003c\/li\u003e\n\u003cli\u003eNozzle temp: 260–280 °C; bed temp: 60–90 °C; no heated enclosure needed.\u003c\/li\u003e\n\u003cli\u003eAbsorbs three times less moisture than ABS and offers greater ductility, per 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTg of 80 °C and HDT of 75 °C at 0.45 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eDry at 65 °C for 4 hours before printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eAlmost certainly. It requires a nozzle capable of 260–280 °C and a bed temperature of 60–90 °C — and 3DXTech confirms no heated enclosure or specialty nozzle is needed. Any printer with an all-metal hotend will run this filament without issues. If your hotend uses a PTFE-lined throat that reaches the nozzle, avoid sustained printing at 280 °C.\u003c\/p\u003e\n\u003ch3\u003eWhat Does ESD Mean and Why Do I Need It?\u003c\/h3\u003e\n\u003cp\u003eAn ESD material doesn't build up static charge — it slowly bleeds it away before it can arc across a sensitive component. That's why it's used for PCB assembly trays, guides, test fixtures, and electronics transport cases. One important note: the 3DXTech website lists 10⁴–10⁹ Ω as the target range, while the technical datasheet specifies \u0026gt;10⁷–10⁹ Ω\/sq. For any critical application, measure your printed part directly.\u003c\/p\u003e\n\u003ch3\u003e750 g or 2 kg Spool?\u003c\/h3\u003e\n\u003cp\u003eSame material, different quantity. The 750 g spool is compatible with multi-material systems such as the Bambu AMS, Creality CFS, and Anycubic ACE Pro, according to 3DXTech. The 2 kg spool makes more sense if you're running production batches of ESD tooling or fixtures.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePETG with carbon nanotubes (ESD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable sizes\u003c\/td\u003e\n\u003ctd\u003e750 g or 2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e260–280 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e60–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements per 3DXTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e65 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.28 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e50 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e1800 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e13%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e74 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e1780 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistance (ASTM D257)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10⁷–10⁹ Ω\/sq (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe TDS test specimens were printed at 250 °C with a 70 °C bed, 0.25 mm layer height, and 100% infill — a solid starting point even though the recommended range is 260–280 °C.\u003c\/li\u003e\n\u003cli\u003eDry it at 65 °C for 4 hours even if the spool is brand new. Any of our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e can reach that temperature.\u003c\/li\u003e\n\u003cli\u003eDo not use acetone or paint the surface if you need to maintain surface conductivity.\u003c\/li\u003e\n\u003cli\u003eMeasure the resistance on the finished part, especially if you significantly change the print temperature or flow rate.\u003c\/li\u003e\n\u003cli\u003eLike all PETG, on smooth PEI a thin layer of adhesive is recommended to prevent the build surface from tearing when removing the print.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sizes do you carry?\u003c\/strong\u003e\u003cbr\u003e1.75 mm in black, available on 750 g or 2 kg spools. Both SKUs (PTG02ES100750BK00 and PTG02ES102000BK00) are verified on 3dxtech.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a heated enclosure required?\u003c\/strong\u003e\u003cbr\u003eNo. 3DXTech states that an enclosure is not necessary for this material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003cbr\u003e3DXTech does not specify any special nozzle requirements for this filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surface resistance does it achieve?\u003c\/strong\u003e\u003cbr\u003eThe product page targets 10⁴–10⁹ Ω, while the TDS reports \u0026gt;10⁷–10⁹ Ω\/sq measured per ASTM D257.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for electronics enclosures?\u003c\/strong\u003e\u003cbr\u003eYes, that's a primary use case: trays, brackets, and fixtures that come into contact with static-sensitive components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow heat-resistant is it?\u003c\/strong\u003e\u003cbr\u003eAbout what you'd expect from a PETG: HDT of 75 °C and Tg of 80 °C per the TDS. Keep it away from heat sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it smell while printing?\u003c\/strong\u003e\u003cbr\u003e3DXTech describes it as very low odor during printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it with the AMS?\u003c\/strong\u003e\u003cbr\u003eThe 750 g spool fits in the AMS, according to 3DXTech. For other materials compatible with your printer, check out our full range of \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-para-impresion-3d\"\u003e3D printing filaments\u003c\/a\u003e.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Negro \/ 1,75 mm \/ 2 kg","offer_id":55213582975313,"sku":"PTG02ES102000BK00","price":296.45,"currency_code":"EUR","in_stock":true},{"title":"Negro \/ 1,75 mm \/ 750 g","offer_id":55213583171921,"sku":"PTG02ES100750BK00","price":130.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-3dxstat-esd-petg-filamento-1.jpg?v=1791386732","url":"https:\/\/mrresin.es\/en\/products\/3dxtech-3dxstat-esd-petg-filament","provider":"Mr Resin","version":"1.0","type":"link"}