{"product_id":"3dxtech-carbonx-abs-cf-filamento","title":"3DXTech CarbonX ABS+CF - Carbon Fiber ABS Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech CarbonX ABS+CF: Carbon Fiber ABS Filament for Rigid Parts (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eCarbonX ABS+CF is a premium ABS filament reinforced with 10% high-modulus carbon fiber, manufactured in the USA by 3DXTech. The carbon fiber dramatically increases stiffness: the TDS lists a tensile modulus of 5,210 MPa. This is my go-to filament for brackets, tooling fixtures, and structural parts that need to hold their shape without flexing. Available in black, 750 g, 1.75 mm. Requires a heated bed at 100–110 °C, an enclosed printer, and a hardened steel nozzle.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eABS with 10% high-modulus carbon fiber reinforcement.\u003c\/li\u003e\n\u003cli\u003eTensile modulus of 5,210 MPa and flexural modulus of 5,260 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eAcetone vapor smoothing compatible, according to 3DXTech.\u003c\/li\u003e\n\u003cli\u003eEasier to print than most industrial-grade materials.\u003c\/li\u003e\n\u003cli\u003eNozzle temp: 220–240 °C | Bed temp: 100–110 °C | Enclosed chamber recommended.\u003c\/li\u003e\n\u003cli\u003eMinimum 0.4 mm hardened steel nozzle and 0.25 mm layer height or above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eIf you're already printing ABS in an enclosed printer, most likely yes. The main thing to check is your nozzle: 3DXTech requires a minimum 0.4 mm hardened steel nozzle. Carbon fiber will wear through a brass nozzle quickly. A heated chamber is also recommended, along with a bed temperature of 100–110 °C. In an open-frame printer, limit yourself to small parts only.\u003c\/p\u003e\n\u003ch3\u003eWhat Does Carbon Fiber ABS Offer Over Standard ABS?\u003c\/h3\u003e\n\u003cp\u003eGreater stiffness and better dimensional stability. The trade-off is reduced elongation: the TDS lists just 2% at break, meaning parts will snap rather than bend. If you need toughness or impact resistance, standard unfilled ABS or nylon is a better choice. For a deeper dive, check out our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-con-fibra-de-carbono-guia-completa\"\u003ecomplete carbon fiber filament guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS + 10% carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e220–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e100–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened steel, 0.4 mm minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.25 mm or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e80 °C for 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.11 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e46 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e5,210 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e76 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e5,260 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e105 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e76 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistivity\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10⁹ Ω\/sq\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse a hardened steel nozzle, 0.4 mm or larger. 3DXTech is clear on this requirement.\u003c\/li\u003e\n\u003cli\u003eSet layer height to 0.25 mm or above. TDS test specimens were printed at 230 °C, 110 °C bed, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eDry for 4 hours at 80 °C before printing if the spool has been exposed to air. We carry \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e that will get the job done.\u003c\/li\u003e\n\u003cli\u003eKeep the printer enclosed and reduce part cooling fan speed to prevent layer delamination.\u003c\/li\u003e\n\u003cli\u003eIf acetone vapor smoothing, use a sealed container and work in a well-ventilated area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 750 g spool, black. SKU ABS03CF200750BK00 as listed on 3dxtech.com (the '2' in the SKU does not indicate 2.85 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much carbon fiber does it contain?\u003c\/strong\u003e\u003cbr\u003e10% high-modulus carbon fiber by weight, per 3DXTech.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened nozzle?\u003c\/strong\u003e\u003cbr\u003eYes. 3DXTech recommends a minimum 0.4 mm hardened steel nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a heated enclosure?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one. A closed printer typically works well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eHDT of 76 °C at 0.45 MPa and a Tg of 105 °C per the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be smoothed with acetone?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech states it is compatible with acetone vapor smoothing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it conductive or ESD-safe?\u003c\/strong\u003e\u003cbr\u003eNo. The TDS lists a surface resistance of over 10⁹ Ω\/sq.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it so stiff yet brittle?\u003c\/strong\u003e\u003cbr\u003eThe fiber reinforcement raises the modulus to 5,210 MPa but limits elongation at break to 2%, per the TDS.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213580517713,"sku":"ABS03CF200750BK00","price":56.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-carbonx-abs-cf-filamento-1.jpg?v=1791386711","url":"https:\/\/mrresin.es\/en\/products\/3dxtech-carbonx-abs-cf-filament","provider":"Mr Resin","version":"1.0","type":"link"}