{"product_id":"3dxtech-carbonx-pla-cf-filamento","title":"3DXTech CarbonX PLA+CF - Carbon Fiber PLA Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech CarbonX PLA+CF: Carbon Fiber PLA for Rigid Prototypes (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eCarbonX PLA+CF is the most beginner-friendly filament in the CarbonX lineup. It's a NatureWorks PLA reinforced with carbon fiber that prints without a heated bed or enclosure, with very little odor — making it a great fit for home or office use. Low demands, high payoff: parts come out stiff with a clean surface finish, and the TDS lists a flexural modulus of 6,320 MPa. Available in black, 750 g, 1.75 mm. The only real requirement: a hardened nozzle.\u003c\/p\u003e\n\u003ch3\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNatureWorks PLA reinforced with carbon fiber.\u003c\/li\u003e\n\u003cli\u003eFlexural modulus 6,320 MPa and tensile modulus 4,950 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003ePrints without a heated bed or enclosure, very low odor.\u003c\/li\u003e\n\u003cli\u003eNozzle temp 190–220 °C, bed temp 23–60 °C.\u003c\/li\u003e\n\u003cli\u003eHardened steel nozzle, 0.4 mm minimum.\u003c\/li\u003e\n\u003cli\u003eCompatible with Bambu Lab AMS, per 3DXTech.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill my printer handle it?\u003c\/h3\u003e\n\u003cp\u003eAlmost certainly yes. Temperatures are standard PLA range and no enclosure is needed. The only real requirement is the nozzle: 3DXTech strongly recommends hardened steel instead of a soft metal, 0.4 mm minimum. If your printer has a brass nozzle, swap it out first — the carbon fiber will wear it down fast.\u003c\/p\u003e\n\u003ch3\u003eWhat is it good for — and what isn't it?\u003c\/h3\u003e\n\u003cp\u003e3DXTech positions this filament for prototypes and functional parts where looks, stiffness, and consistency matter. It works great for enclosures, functional mockups, camera mounts, and drone components. Don't leave it in a hot car or near heat sources: the Tg is 60 °C. If you need higher temperature resistance, check out the ABS+CF or ezPC+CF in \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePLA (NatureWorks) + carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e190–220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e23–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened steel, 0.4 mm minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer height\u003c\/td\u003e\n\u003ctd\u003e0.25 mm or greater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e65 °C, 4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.29 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e48 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e4,950 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e89 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e6,320 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e91 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface resistivity\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10⁹ Ω\/sq\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTDS test specimens were printed at 215 °C, bed at 23 °C, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003eUse a layer height of 0.25 mm or greater, as 3DXTech recommends, to prevent fiber clogs at the nozzle.\u003c\/li\u003e\n\u003cli\u003eIf the spool has absorbed moisture, dry it for 4 hours at 65 °C. Any of our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e will do the job.\u003c\/li\u003e\n\u003cli\u003eExpect a matte, low-gloss surface finish — this is a technical filament, not a standard PLA.\u003c\/li\u003e\n\u003cli\u003eIf you're interested in carbon fiber filament in general, check out our \u003ca href=\"https:\/\/mrresin.es\/blogs\/mr-resin-3d-blog\/filamento-con-fibra-de-carbono-guia-completa\"\u003ecomplete carbon fiber filament guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm, 750 g, black. SKU: PLA03CF100750BK00.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a heated bed?\u003c\/strong\u003e\u003cbr\u003eNo. 3DXTech specifies a bed temperature of 23–60 °C and specifically highlights that it prints without a heated bed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech strongly recommends one — 0.4 mm minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an enclosed printer?\u003c\/strong\u003e\u003cbr\u003eNo, an enclosure is not required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with the Bambu AMS?\u003c\/strong\u003e\u003cbr\u003eYes, 3DXTech lists it as AMS compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it handle?\u003c\/strong\u003e\u003cbr\u003eAccording to the TDS, it has a Tg of 60 °C and an HDT of 91 °C at 0.45 MPa. For heat-resistant applications, choose a different material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it smell when printing?\u003c\/strong\u003e\u003cbr\u003eVery little, according to 3DXTech — it's designed for home and office use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it brittle?\u003c\/strong\u003e\u003cbr\u003eIt is rigid: the TDS lists elongation at break at 2%. Do not use it for parts that need to flex or bend.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213581107537,"sku":"PLA03CF100750BK00","price":53.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-carbonx-pla-cf-filamento-1.jpg?v=1791386716","url":"https:\/\/mrresin.es\/en\/products\/3dxtech-carbonx-pla-cf-filament","provider":"Mr Resin","version":"1.0","type":"link"}