{"product_id":"3dxtech-firewire-fr-abs-filamento","title":"3DXTech Firewire FR-ABS - Flame Retardant ABS Filament 1.75mm 750g","description":"\u003ch2\u003e3DXTech Firewire FR-ABS: Flame Retardant ABS Filament with UL94 V-0 Base Resin (750 g, 1.75 mm)\u003c\/h2\u003e\n\u003cp\u003eFirewire FR-ABS is 3DXTech's flame retardant ABS filament. It's built on a UL94 V-0 rated base resin and produces self-extinguishing parts designed for electrical enclosures, panels, and equipment where fire is a real hazard. It prints like standard ABS: nozzle at 220–240 °C, bed at 100–110 °C, and best results in an enclosed printer. Available in black, 750 g spool, 1.75 mm diameter. Note: the V-0 rating applies to the base resin, not your finished printed part.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlame retardant and self-extinguishing ABS.\u003c\/li\u003e\n\u003cli\u003eBase resin rated UL94 V-0 at 1.5 mm (per TDS).\u003c\/li\u003e\n\u003cli\u003eEasier to print than most industrial-grade materials, according to 3DXTech.\u003c\/li\u003e\n\u003cli\u003eTensile strength of 45 MPa and HDT of 95 °C at 0.45 MPa (per TDS).\u003c\/li\u003e\n\u003cli\u003eNozzle 220–240 °C, bed 100–110 °C, enclosed chamber recommended.\u003c\/li\u003e\n\u003cli\u003eNo special nozzle required. Dry at 80 °C for 4 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill My Printer Handle It?\u003c\/h3\u003e\n\u003cp\u003eIf you can print ABS, you can print this. You need a bed temperature of 100–110 °C and a nozzle temperature of 220–240 °C, and 3DXTech recommends a heated enclosure. A closed printer — even without active chamber heating — is usually enough for mid-sized parts. On an open-frame printer, larger prints are likely to warp and delaminate.\u003c\/p\u003e\n\u003ch3\u003eWhat Does UL94 V-0 Actually Mean Here?\u003c\/h3\u003e\n\u003cp\u003eUL94 V-0 is a vertical burn classification: the flame self-extinguishes quickly with no flaming drips. In 3DXTech's TDS, this rating is marked with an asterisk as a base resin property, tested at 1.5 mm thickness. Your printed part does not automatically inherit that certification — if you need to meet a specific standard, the finished part must be tested independently. Browse other engineering-grade options in our \u003ca href=\"https:\/\/mrresin.es\/collections\/filamentos-tecnicos\"\u003etechnical filaments collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFlame retardant ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e220–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e100–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eNo special requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e80 °C, 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (ISO 1183)\u003c\/td\u003e\n\u003ctd\u003e1.18 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ISO 527)\u003c\/td\u003e\n\u003ctd\u003e45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e1990 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ISO 178)\u003c\/td\u003e\n\u003ctd\u003e80 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e2250 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTg (DSC)\u003c\/td\u003e\n\u003ctd\u003e105 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ISO 75)\u003c\/td\u003e\n\u003ctd\u003e95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability\u003c\/td\u003e\n\u003ctd\u003eUL94 V-0 at 1.5 mm (base resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTDS test specimens were printed at 235 °C, bed at 110 °C, 0.25 mm layer height, and 100% infill.\u003c\/li\u003e\n\u003cli\u003ePrint in an enclosed printer with the part cooling fan set low.\u003c\/li\u003e\n\u003cli\u003eThe base resin rating was established at 1.5 mm wall thickness. Avoid designing walls thinner than that on fire-critical parts.\u003c\/li\u003e\n\u003cli\u003eDry at 80 °C for 4 hours if the spool has been open for a while. Check our \u003ca href=\"https:\/\/mrresin.es\/collections\/secadoras-de-filamento\"\u003efilament dryers\u003c\/a\u003e — several reach that temperature.\u003c\/li\u003e\n\u003cli\u003ePrint in a ventilated area, as you would with any ABS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003e1.75 mm diameter, 750 g spool, black. SKU ABS07FR200750BK00, verified on 3dxtech.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it fireproof?\u003c\/strong\u003e\u003cbr\u003eIt's flame retardant and self-extinguishing. The base resin is rated UL94 V-0 at 1.5 mm thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre my printed parts V-0 rated?\u003c\/strong\u003e\u003cbr\u003eNot automatically. The TDS rating applies to the base resin; the finished part would need to be tested separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a heated enclosure?\u003c\/strong\u003e\u003cbr\u003e3DXTech recommends one. A enclosed printer makes a significant difference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hardened steel nozzle?\u003c\/strong\u003e\u003cbr\u003eNo, 3DXTech doesn't specify any special nozzle requirements for this filament.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the heat resistance of printed parts?\u003c\/strong\u003e\u003cbr\u003eHDT of 95 °C at 0.45 MPa and a Tg of 105 °C, according to the TDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it used for?\u003c\/strong\u003e\u003cbr\u003e3DXTech targets this filament at automotive, aerospace, consumer electronics, and industrial equipment applications where flame spread risk needs to be minimized.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be smoothed with acetone?\u003c\/strong\u003e\u003cbr\u003e3DXTech doesn't mention acetone smoothing for this material, so we can't confirm whether it works.\u003c\/p\u003e","brand":"3DXTech","offers":[{"title":"Default Title","offer_id":55213581599057,"sku":"ABS07FR200750BK00","price":87.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/3dxtech-firewire-fr-abs-filamento-1.jpg?v=1791386719","url":"https:\/\/mrresin.es\/en\/products\/3dxtech-firewire-fr-abs-filament","provider":"Mr Resin","version":"1.0","type":"link"}