{"product_id":"filamento-asa-elegoo","title":"🏗️ Elegoo ASA Filament for 3D printer — 1 Kg","description":"\u003c!-- \n  FILAMENTO ELEGOO ASA 1.75 mm — 1 Kg\n  Descripción de producto para Shopify — Mr Resin\n  \n  META TITLE (≤60 chars): Elegoo ASA Filament 1.75 mm 1 Kg | Buy at Mr Resin\n  META DESCRIPTION (≤155 chars): Buy Elegoo ASA filament 1.75 mm 1 Kg. UV and outdoor resistant, superior thermal stability. 24h shipping from Spain. Official distributor.\n  \n  URL HANDLE sugerido: \/products\/filamento-asa-elegoo-1-75mm-1kg\n  \n  KEYWORD PRINCIPAL: Elegoo ASA filament\n  KEYWORDS SECUNDARIAS: ASA filament 1.75 mm, ASA for 3D printer, outdoor 3D filament, UV resistant filament, buy Elegoo ASA Spain\n--\u003e\n\u003ch2\u003eElegoo ASA Filament, the all-terrain outdoor material\u003c\/h2\u003e\n\u003cp\u003eIf you need to print parts that are going to live outdoors and you don't want the sun or rain to destroy them within two months, Elegoo ASA filament is exactly what you're looking for. No half measures. 🎯\u003c\/p\u003e\n\u003cp\u003eASA (Acrylonitrile Styrene Acrylate) is the bigger brother of ABS, but with superpowers: \u003cstrong\u003eresistance to UV rays, water, and outdoor weather\u003c\/strong\u003e that keeps your parts holding up outside without fading or becoming brittle. Think camera mounts, sensor housings, drone parts, garden accessories, or anything that needs to withstand whatever gets thrown at it. ☀️🌧️\u003c\/p\u003e\n\u003cp\u003eElegoo has engineered this filament with a dimensional accuracy of ±0.02 mm, and it comes mechanically wound on an eco-friendly cardboard spool. Vacuum-sealed with desiccant so it arrives at your door in perfect condition, with no moisture or surprises. 📦\u003c\/p\u003e\n\u003ch2\u003e✅ What makes Elegoo ASA filament special\u003c\/h2\u003e\n\u003cp\u003e☀️ \u003cstrong\u003eUV and outdoor weather resistance\u003c\/strong\u003e — Your parts won't degrade, yellow, or become brittle in the sun. Ideal for outdoor applications that need to last.\u003c\/p\u003e\n\u003cp\u003e🔥 \u003cstrong\u003eSuperior thermal stability\u003c\/strong\u003e — Handles significantly higher temperatures than PLA or PETG without warping. If your part is going to be near a heat source, ASA is your material.\u003c\/p\u003e\n\u003cp\u003e💪 \u003cstrong\u003eABS-level mechanical properties\u003c\/strong\u003e — Impact resistance, toughness, and rigidity comparable to ABS, but with the added advantage of not deteriorating outdoors.\u003c\/p\u003e\n\u003cp\u003e📐 \u003cstrong\u003eDimensional accuracy ±0.02 mm\u003c\/strong\u003e — Manufactured to strict tolerances so your functional parts fit exactly as they should.\u003c\/p\u003e\n\u003cp\u003e🧵 \u003cstrong\u003eClean winding, tangle-free\u003c\/strong\u003e — Mechanically wound with manual inspection. No knots or surprises mid-print.\u003c\/p\u003e\n\u003cp\u003e💨 \u003cstrong\u003eNo clogs or bubbles\u003c\/strong\u003e — Fully dried before packaging and vacuum-sealed with desiccant. Ready to load and print.\u003c\/p\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eASA (Acrylonitrile Styrene Acrylate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensional accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 g (1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEmpty spool weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~154 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtrusion temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e240–260 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLayer fan\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOff or very low (0–20%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEco-friendly cardboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch2\u003e🖨️ Which printers is it compatible with?\u003c\/h2\u003e\n\u003cp\u003eAny FDM 3D printer that can reach the required extrusion temperatures (240–260 °C). The entire Elegoo Neptune range, the Centauri Carbon, and the vast majority of FDM printers on the market such as Bambu Lab, Creality, Prusa and similar. If your printer handles ABS, it can handle ASA. ✅\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommendation:\u003c\/strong\u003e To get the most out of ASA and minimise warping, the ideal setup is to print with a closed enclosure. If your printer doesn't have one, a draft shield in your slicer also helps quite a bit.\u003c\/p\u003e\n\u003ch2\u003e🚀 Tips for printing with ASA\u003c\/h2\u003e\n\u003cp\u003e🔥 \u003cstrong\u003ePreheat the bed\u003c\/strong\u003e to 90–110 °C and use adhesive (glue stick or hairspray) for a good first layer\u003c\/p\u003e\n\u003cp\u003e🌡️ \u003cstrong\u003eExtruder between 240–260 °C\u003c\/strong\u003e — start at 250 °C and adjust based on results\u003c\/p\u003e\n\u003cp\u003e💨 \u003cstrong\u003eFan at minimum\u003c\/strong\u003e — ASA needs to cool slowly for good layer adhesion. Turn the fan off or keep it at 10–20% maximum\u003c\/p\u003e\n\u003cp\u003e🏠 \u003cstrong\u003eClosed enclosure\u003c\/strong\u003e if possible — Avoid air currents that cause warping and cracking\u003c\/p\u003e\n\u003cp\u003e📏 \u003cstrong\u003eModerate speed\u003c\/strong\u003e — Start at 40–60 mm\/s and print the first layer slower\u003c\/p\u003e\n\u003cp\u003e🧹 \u003cstrong\u003eClean the bed thoroughly\u003c\/strong\u003e before each print so the ASA sticks properly\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003e❓ Frequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between ASA and ABS?\u003c\/h3\u003e\n\u003cp\u003eASA is essentially an improved ABS designed for outdoor use. The mechanical properties are very similar (impact resistance, rigidity, toughness), but ASA adds resistance to UV rays and weathering. Your parts won't yellow or become brittle in the sun, which is something that does happen with ABS. ASA also tends to produce less warping than ABS and has less odour during printing. 💪\u003c\/p\u003e\n\u003ch3\u003eDo I need a closed printer to print ASA?\u003c\/h3\u003e\n\u003cp\u003eIt is highly recommended, yes. ASA is sensitive to sudden temperature changes and air currents. A closed enclosure helps greatly in avoiding warping and cracking. That said, there are people who print ASA on open printers with good results by using a draft shield and dialling in the settings properly. It's not impossible, but an enclosure saves you a lot of headaches. 🏠\u003c\/p\u003e\n\u003ch3\u003eCan I sand and paint ASA parts?\u003c\/h3\u003e\n\u003cp\u003eYes, no problem. ASA can be sanded, painted, and even smoothed with acetone vapour to achieve a smooth, glossy finish. It is one of the few filaments that allows this type of chemical post-processing. 🎨\u003c\/p\u003e\n\u003ch3\u003eIs it safe to print ASA at home?\u003c\/h3\u003e\n\u003cp\u003eASA emits fewer fumes than ABS, but it is still important to print in a well-ventilated space or with an air filtration system. It is not toxic under normal conditions of use, but ventilation is key. If you use an enclosure, an active carbon filter is a good idea. ⚠️\u003c\/p\u003e\u003ch3\u003eWhat bed surface is best for ASA?\u003c\/h3\u003e\n\u003cp\u003ePEI works great with ASA, especially with a thin layer of glue stick. It also works well on glass with hairspray or specialized adhesive. The important thing is that the bed is nice and hot (90–110 °C) and clean. 🔧\u003c\/p\u003e\n\u003ch3\u003eHow long does unopened ASA filament last?\u003c\/h3\u003e\n\u003cp\u003eVacuum sealed and stored in a dry place at room temperature, ASA keeps perfectly for months. Once opened, it is recommended to store it in a bag with desiccant or in a dry box to prevent it from absorbing moisture. 🗓️\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e💬 \u003cstrong\u003eDo you have any questions about this filament or about how to configure your 3D printer for ASA?\u003c\/strong\u003e Come join our \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003eTelegram group\u003c\/a\u003e — we are a great bunch of makers who help each other out. We look forward to seeing you! 🔥\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOfficial Elegoo distributor in Spain\u003c\/strong\u003e 🇪🇸 · Shipping within 24h from our warehouse\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSafety and storage\u003c\/strong\u003e ⚠️\u003cbr\u003e🌡️ Print in a ventilated area or with an air filter. ASA may emit particles during extrusion.\u003cbr\u003e📦 Store in a dry place, protected from moisture. Use a bag with desiccant once the packaging has been opened.\u003cbr\u003e🧤 Do not ingest. Keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003e📦 All products are shipped with the maximum possible remaining shelf life. The remaining period may vary depending on the available batch and stock rotation.\u003c\/p\u003e\n\u003cp\u003e💬 Do you have questions about which Elegoo filament to choose for your project? Join our community on \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/t.me\/MrResin3D\" target=\"_blank\"\u003eTelegram\u003c\/a\u003e — we help you choose and you can take part in exclusive giveaways 🎁\u003c\/p\u003e\n\u003cp\u003e✨ Happy Printing! 🚀\u003c\/p\u003e","brand":"Elegoo","offers":[{"title":"ASA Elegoo Black","offer_id":53208814747985,"sku":null,"price":16.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo White","offer_id":53208814780753,"sku":null,"price":16.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo Grey","offer_id":53208814813521,"sku":null,"price":16.99,"currency_code":"EUR","in_stock":false},{"title":"Elegoo Red ASA","offer_id":53208814846289,"sku":null,"price":16.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo Blue","offer_id":53208814879057,"sku":null,"price":16.99,"currency_code":"EUR","in_stock":false},{"title":"ASA Elegoo Green","offer_id":53208814911825,"sku":null,"price":16.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/Elegoo_ASA_1KG_1.75mm-__negro.webp?v=1772730275","url":"https:\/\/mrresin.es\/en\/products\/filament-asa-elegoo","provider":"Mr Resin","version":"1.0","type":"link"}