{"product_id":"heygears-pantalla-lcd-reflex-2","title":"HeyGears Reflex 2 Series LCD Screen - 10.7\" Replacement LCD Screen for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears LCD Screen for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the official HeyGears replacement LCD screen for the Reflex 2 series: 10.7 inches, with an anti-scratch film and the screen tape pre-applied at the factory. It fits both the Reflex 2 and the Reflex 2 Pro, which share the same 10.7\" screen and a 230 × 144 mm build area.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e HeyGears Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10.7 inches, with anti-scratch film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-applied tape:\u003c\/strong\u003e no need to stick it on by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e modular design, secured with six screws and a T-handle wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich screen does the Reflex 2 series use?\u003c\/h3\u003e\n\u003cp\u003eThe Reflex 2 and Reflex 2 Pro ship with the Amber Screen Pro. According to HeyGears, it keeps contrast and light transmittance within 10% deviation after 6,000 printing hours (around 12 months at 16 hours a day). It uses a large-molecule liquid crystal layer and dyed polarizers that are more UV-resistant, and withstands 10,000 cycles at 40 kg without damage thanks to reinforced support pillars.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eReplace it if the screen is broken, scratched or not projecting properly. To check, HeyGears recommends placing a sheet of white paper on top, going into settings and running \u003cem\u003eTray Cleaning\u003c\/em\u003e, which projects an image across the entire surface. If you see dead areas, lines or spots, it's time to inspect it.\u003c\/p\u003e\n\n\u003ch3\u003eHow to install it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurn off the printer and unplug it from the power supply.\u003c\/li\u003e\n\u003cli\u003eRemove the rubber plugs with tweezers or a flat-head screwdriver.\u003c\/li\u003e\n\u003cli\u003eLoosen the six screws one by one with the T-handle wrench and remove them. Do not use an electric screwdriver.\u003c\/li\u003e\n\u003cli\u003eTake out the old screen without dropping screws or debris inside.\u003c\/li\u003e\n\u003cli\u003ePeel off the bottom protective film from the new screen, connect it, put it in place and remove the front film.\u003c\/li\u003e\n\u003cli\u003eWith the paper on top, power on and run \u003cem\u003eTray Cleaning\u003c\/em\u003e. If the image looks good, power off and tighten the screws with their washers.\u003c\/li\u003e\n\u003cli\u003eRefit the plugs and clean the screen with glass cleaner and a lint-free cloth, always wiping in one direction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eBefore fitting the vat, make sure there's nothing on the screen. If resin spills, use alcohol on a lint-free cloth and wipe in one direction only. You'll find isopropyl alcohol in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eEach Reflex family has its own screen and they are not interchangeable. For the Reflex RS and RS Turbo (10.3\"), choose the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex-rs\"\u003eAmber screen for Reflex RS\u003c\/a\u003e; for the Reflex and Reflex Turbo, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-amber-reflex\"\u003eAmber screen for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt doesn't fit the Reflex, Reflex Turbo, Reflex RS or RS Turbo, or printers from other brands. If you're not comfortable with a screwdriver, it's best to have someone experienced do it.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it fit the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it for the entire Reflex 2 series: Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eDo I need to buy screen tape separately?\u003c\/h4\u003e\n\u003cp\u003eNo. The screen comes with the tape already applied.\u003c\/p\u003e\n\u003ch4\u003eDoes it need to be calibrated with any tool?\u003c\/h4\u003e\n\u003cp\u003eThe official replacement guide for the Reflex 2 series doesn't require a calibration tool. It ends with the image test and cleaning.\u003c\/p\u003e\n\u003ch4\u003eHow long does it last?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Amber Screen Pro of the Reflex 2 series at over 6,000 printing hours. Actual lifespan depends on usage.\u003c\/p\u003e\n\u003ch4\u003eCan I replace it myself?\u003c\/h4\u003e\n\u003cp\u003eYes, if you follow the steps carefully: printer powered off, screws removed with the T-handle wrench and an image test before tightening.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on a Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS uses a different 10.3-inch screen.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203067729,"sku":"DIST-6971437943410","price":317.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pantalla-lcd-reflex-2-recambio.jpg?v=1792509539","url":"https:\/\/mrresin.es\/en\/products\/heygears-pantalla-lcd-reflex-2","provider":"Mr Resin","version":"1.0","type":"link"}