{"product_id":"heygears-plataforma-de-impresion-reflex","title":"HeyGears Reflex \/ Reflex Turbo - Stainless Steel Build Plate","description":"\u003ch2\u003eHeyGears steel build platform for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eGenuine replacement build platform for the HeyGears Reflex. It's a perforated 304 stainless steel plate: the holes let liquid resin drain back into the vat instead of pooling on the platform and your parts. Get it to replace a damaged platform, or as a second one so your printer keeps running while you remove parts.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated design:\u003c\/strong\u003e helps resin drain away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex build volume:\u003c\/strong\u003e 192 x 121 x 220 mm (HeyGears figure).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e replacement or second platform for batch printing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it for the Reflex. The Reflex Turbo is the evolution of the Reflex, with an upgraded Amber screen, and HeyGears groups documentation and spare parts for both as \"Reflex\/Reflex Turbo\" (vats, films, tape and screen protector). It does not fit the Reflex RS family or the Reflex 2 series: for those, choose the Reflex RS platform or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-perforada-reflex-2\"\u003eReflex 2 perforated platform\u003c\/a\u003e. The platform stays the same whether you use the standard vat, the Pulsing Release vat or the Pulsing Release Module.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the surface is damaged or warped and parts no longer stick.\u003c\/li\u003e\n\u003cli\u003eIf you print in batches and want a clean platform ready for the next job.\u003c\/li\u003e\n\u003cli\u003eIf parts are falling off, check these first: debris in the vat or in the platform holes, a cloudy or damaged film, poorly stored resin or low temperature. HeyGears recommends 20-25 °C and humidity below 50 %.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and leveling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the platform on its holder with the vat clean and locked in place.\u003c\/li\u003e\n\u003cli\u003eLevel it from the printer menu. HeyGears has an official video, \"Reflex Build Platform Leveling\", on its wiki.\u003c\/li\u003e\n\u003cli\u003eTo remove the platform with parts without touching the resin, HeyGears sells a Platform Transfer Tool that is only compatible with the Reflex.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRafts and holes\u003c\/h3\u003e\n\u003cp\u003eWith a perforated platform, you need to pay attention to the raft. HeyGears recommends:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDon't print without a raft, or with a solid or skate-style raft: parts come loose more easily.\u003c\/li\u003e\n\u003cli\u003eA raft no smaller than the part's cross-section and at least 10 x 10 mm, so supports aren't generated over a hole.\u003c\/li\u003e\n\u003cli\u003eRaft thickness above 1 mm, so it comes off in one piece without leaving residue.\u003c\/li\u003e\n\u003cli\u003eGroup small parts in Blueprint Studio on a single raft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning\u003c\/h3\u003e\n\u003cp\u003eAfter removing your parts, check there's no residue left on the surface or inside the holes. Clean with isopropyl alcohol and a lint-free cloth, and blow dry with air before mounting it. You'll find alcohol and supplies in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex Steel Build Platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex, Reflex Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437942062\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIt's not for the Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro, or for printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eDoes it fit the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears treats the Reflex and Reflex Turbo as the same family, and they share the print area spare parts.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex RS or Reflex 2?\u003c\/h4\u003e\n\u003cp\u003eNo. Each family has its own platform.\u003c\/p\u003e\n\u003ch4\u003eWhat material is it made of?\u003c\/h4\u003e\n\u003cp\u003e304 stainless steel, with a perforated design.\u003c\/p\u003e\n\u003ch4\u003eWhat are the holes for?\u003c\/h4\u003e\n\u003cp\u003eThey let liquid resin drain back into the vat. That's why a raft of at least 10 x 10 mm is recommended.\u003c\/p\u003e\n\u003ch4\u003eDo I need to level it after replacing it?\u003c\/h4\u003e\n\u003cp\u003eYes, from the printer menu, following HeyGears' official leveling video.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The platform is the same with or without the module.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204345681,"sku":"DIST-6971437942062","price":161.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-plataforma-impresion-acero-reflex.jpg?v=1792509560","url":"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-de-impresion-reflex","provider":"Mr Resin","version":"1.0","type":"link"}