{"product_id":"heygears-plataforma-perforada-reflex-2","title":"HeyGears Reflex 2 \/ 2 Pro - Perforated Stainless Steel Build Plate","description":"\u003ch2\u003eHeyGears Perforated Build Platform for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the original build platform for the Reflex 2 series: a 304 stainless steel plate full of holes, the same one that comes as standard with the printer. The holes let the resin drain better as the platform rises out of the vat. Use it as a replacement if yours has been damaged, or as a second platform so you can keep one printing while you remove parts from the other.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated design:\u003c\/strong\u003e helps liquid resin drain away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt's the same one that comes with the printer\u003c\/strong\u003e in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling:\u003c\/strong\u003e adjusted with the T-handle wrench supplied with the printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists it only for the Reflex 2 and Reflex 2 Pro. It does not fit the Reflex, the Reflex Turbo or the Reflex RS family: each has its own platform (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-de-impresion-reflex\"\u003eReflex platform\u003c\/a\u003e and Reflex RS platform). It works the same with the standard vat, the Pulsing Release vat and the Pulsing Release Module 2: the platform doesn't change when you use the module.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace it or get a second one\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the surface is damaged, bent or dented and parts no longer adhere properly.\u003c\/li\u003e\n\u003cli\u003eIf you work in batches: with a second clean platform you can start the next job without waiting to remove parts from and clean the first one.\u003c\/li\u003e\n\u003cli\u003eBefore blaming the platform when a part doesn't stick, check the usual suspects: debris in the vat or in the holes, a damaged film, old resin or low temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and levelling\u003c\/h3\u003e\n\u003cp\u003eYou mount it on the printer's holder and level it from the menu. These are the steps HeyGears gives for the Reflex 2 series:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure the platform and vat are clean, free of debris, and that both are locked in place. The scraper must be at the far right.\u003c\/li\u003e\n\u003cli\u003eGo to settings and select platform levelling. Use tweezers to remove the two rubber plugs from the top of the holder.\u003c\/li\u003e\n\u003cli\u003eWith the T-handle wrench, turn the holder screw in the direction shown on the screen until the value turns green.\u003c\/li\u003e\n\u003cli\u003eConfirm. The printer runs a check and, if needed, will ask you for a fine adjustment.\u003c\/li\u003e\n\u003cli\u003ePut the rubber plugs back and press OK to return the platform to its position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning and using a perforated platform\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the platform in a tray with 95% alcohol or IPA and wipe it with a lint-free cloth. You can spray alcohol into the holes.\u003c\/li\u003e\n\u003cli\u003eDry it with compressed air, including the holes, and check that no resin remains before printing again.\u003c\/li\u003e\n\u003cli\u003eUse rafts of at least 10 x 10 mm, no smaller than the part's cross-section and more than 1 mm thick. This prevents Blueprint Studio from generating supports right over a hole.\u003c\/li\u003e\n\u003cli\u003eFor small parts, group them in Blueprint Studio so they share a single raft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor alcohol and other cleaning supplies, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003epost-processing\u003c\/a\u003e section.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eReflex 2 Series Perforated Build Platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eReflex 2, Reflex 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e6971437943465\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cp\u003eIf you have a Reflex, Reflex Turbo, Reflex RS or RS Turbo, this platform won't fit. It's also not for resin printers from other brands.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with both the Reflex 2 and the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with both.\u003c\/p\u003e\n\u003ch4\u003eIs it the same one that comes with the printer?\u003c\/h4\u003e\n\u003cp\u003eYes, it's the Reflex 2's standard platform. You buy it as a replacement or as a second platform.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex RS or the original Reflex?\u003c\/h4\u003e\n\u003cp\u003eNo. Each family has its own platform.\u003c\/p\u003e\n\u003ch4\u003eDo I need to level it after swapping it?\u003c\/h4\u003e\n\u003cp\u003eYes, level it from the settings menu using the T-handle wrench.\u003c\/p\u003e\n\u003ch4\u003eWhat are the holes for?\u003c\/h4\u003e\n\u003cp\u003eTo help the resin drain better. That's why you should use rafts of at least 10 x 10 mm and avoid placing supports over a hole.\u003c\/p\u003e\n\u003ch4\u003eHow do I clean it?\u003c\/h4\u003e\n\u003cp\u003eWith 95% alcohol or IPA and a lint-free cloth, getting alcohol into the holes, then drying it with air.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module to use it?\u003c\/h4\u003e\n\u003cp\u003eNo. It works the same with or without the module.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384204083537,"sku":"DIST-6971437943465","price":177.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-plataforma-perforada-reflex-2-acero-inoxidable.jpg?v=1792509556","url":"https:\/\/mrresin.es\/en\/products\/heygears-plataforma-perforada-reflex-2","provider":"Mr Resin","version":"1.0","type":"link"}