{"product_id":"heygears-pulsing-release-module-kit-reflex-2","title":"HeyGears Pulsing Release Module 2 Kit for Reflex 2 and Reflex 2 Pro - Module + Tank","description":"\u003ch2\u003ePulsing Release Module 2 Kit for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eComplete HeyGears kit for adding pulsing release to a \u003cstrong\u003eReflex 2 or Reflex 2 Pro\u003c\/strong\u003e: it includes the second-generation module and the pulsing tank. The module inflates and deflates the tank film in cycles, reducing the peel force on each layer by around 50 %. It's the option for you if you have neither of the two parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pulsing Release Module 2.\u003c\/li\u003e\n\u003cli\u003e1 Pulsing Release tank for the Reflex 2 series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you already have the tank, all you need is the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003ePulsing Release Module 2 without tank\u003c\/a\u003e. If you're only missing the tank, the Reflex 2 pulsing tank is also available.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYes:\u003c\/strong\u003e Reflex 2 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. Neither includes it in the box: they come with the standard tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex RS and RS Turbo, which use the first-generation module (\u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003eReflex kit\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-rs\"\u003eRS kit\u003c\/a\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eResins\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for:\u003c\/strong\u003e PAC10, PAE10, PAU20, PAH270 and PAE20.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional\u003c\/strong\u003e with all other Reflex resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with PAWW10 and PAWW20.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImprovements over the first module\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore precise pulse control and better surface finish on pillars of 1 mm or less.\u003c\/li\u003e\n\u003cli\u003eFewer layer lines on walls of 3 mm or less.\u003c\/li\u003e\n\u003cli\u003eBetween 20 % and 60 % fewer supports.\u003c\/li\u003e\n\u003cli\u003eCritical support angle from 15°.\u003c\/li\u003e\n\u003cli\u003eBetween 25 % and 54 % less sanding time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eModule specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 24 V DC. Power: 25 W.\u003c\/li\u003e\n\u003cli\u003eDimensions: 310 × 148 × 235 mm. Weight: 3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eOn the tank, remove the protective film from the base and the four dust stickers from the air channels. Do not remove the two bottom tapes. On the module, open the filter cover, take out the cotton and the rubber plug, and close it again. With the printer switched off, connect the air tube and the cable at the back. Switch it on, fit the tank, scraper and build plate, and select the module in Blueprint Studio when creating the project. When printing, the printer detects the module automatically. The part that wears with use is the tank film, which HeyGears sells separately.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eKit or module without tank?\u003c\/h4\u003e\n\u003cp\u003eThe kit includes the module and the tank. The module without tank is just the device, for those who already have the Reflex 2 pulsing tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with my Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. For the RS there's the first-generation kit with its heated tank.\u003c\/p\u003e\n\u003ch4\u003eDoes the Reflex 2 Pro come with it as standard?\u003c\/h4\u003e\n\u003cp\u003eNo. It comes with the standard tank and the heated scraper; the module is sold separately.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAWW20 with the module fitted?\u003c\/h4\u003e\n\u003cp\u003eNo. For water-washable resins, use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eWhat wears out with use?\u003c\/h4\u003e\n\u003cp\u003eThe tank film. When it gets scratched or leaks resin, you replace the film or the tank, not the module.\u003c\/p\u003e\n\u003ch4\u003eWhere does it ship from?\u003c\/h4\u003e\n\u003cp\u003eFrom our official HeyGears distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384202707281,"sku":"DIST-21026971437943519","price":815.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-pulsing-release-module-2-kit-reflex-2.jpg?v=1792509531","url":"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2","provider":"Mr Resin","version":"1.0","type":"link"}