{"product_id":"heygears-tanque-de-resina-reflex-2","title":"HeyGears Reflex 2 Series Regular Resin Tank - Standard resin tank for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears Standard Resin Tank for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the regular Reflex 2 series tank, without Pulsing Release. It's easy to swap and works with both the Reflex 2 and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e. It does not work with the Pulsing Release Module 2. For that, you need the Pulsing Release tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not require\u003c\/strong\u003e the Pulsing Release Module and does not work with it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResins:\u003c\/strong\u003e all Reflex 2 series resins that don't require the module, including water-washable ones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e on the Reflex 2 series, the resin is heated by the heated scraper, not by the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy get a second tank\u003c\/h3\u003e\n\u003cp\u003eWith one tank per resin, you don't have to empty and clean the tank every time you switch materials. It also gives you a spare if yours gets damaged. HeyGears even suggests stacking tanks of different resins using the platform's side drip rack.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the resins HeyGears marks as \"optional\" or \"no\" for the module: PAS10, PAP10, PAWR10, PAF10, PAU11, PAH10, PAM10, PAT10 and water-washable resins (such as \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e).\u003c\/li\u003e\n\u003cli\u003ePAC10, PAE10, PAU20 and PAH270 require the Pulsing Release Module 2 and its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2\"\u003ePulsing Release tank for Reflex 2\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex, Reflex Turbo, RS or RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTake the tank out of the bag. There's a protective film under the release film. Peel it off slowly without pulling off the support pads.\u003c\/li\u003e\n\u003cli\u003eIf the rubber plugs under the tank stick out after shipping, press them back in.\u003c\/li\u003e\n\u003cli\u003eMake sure the screen is clean, place the tank on top and lock it in.\u003c\/li\u003e\n\u003cli\u003eFit the build platform and insert the scraper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCleaning and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecover leftover resin through a 120 mesh filter and pour it back into its bottle.\u003c\/li\u003e\n\u003cli\u003eScrape out any remaining resin with a spatula or scraper card.\u003c\/li\u003e\n\u003cli\u003eSpray alcohol or IPA inside and wipe with a lint-free cloth. You'll find alcohol in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eBefore refitting it, make sure there's no resin or cleaner residue left.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe release film has its own lifespan. HeyGears sells the Reflex 2 series film in packs of two, so you don't need to replace the whole tank if only the film fails. Replace the complete tank only if the frame is damaged.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eFor standard, high-detail or water-washable resins, choose this tank. If you want to print castable, elastic, tooling or high-temperature resins, you need the Pulsing Release tank with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit\u003c\/a\u003e. To heat the resin, you need the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eHow is it different from the Pulsing Release tank?\u003c\/h4\u003e\n\u003cp\u003eThe Pulsing Release tank works with Module 2 and is required for PAC10, PAE10, PAU20 and PAH270. This tank is for printing without the module.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the entire Reflex 2 series.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAH270 with this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. PAH270 requires the Pulsing Release Module 2 and its tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with water-washable resins?\u003c\/h4\u003e\n\u003cp\u003eYes. Water-washable resins aren't compatible with the module, so they go in this tank. PAWW20 works on the Reflex 2 and 2 Pro. According to HeyGears' chart, PAWW10 works only on the Reflex 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eNo. On the Reflex 2 series, heating is done by the heated scraper.\u003c\/p\u003e\n\u003ch4\u003eCan I remove the film under the release film?\u003c\/h4\u003e\n\u003cp\u003eYes. It's a protective film that must be removed before use. Peel it off slowly without removing the pads.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203854161,"sku":"DIST-6971437943441","price":117.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-de-resina-reflex-2.jpg?v=1792509551","url":"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex-2","provider":"Mr Resin","version":"1.0","type":"link"}