{"product_id":"heygears-tanque-de-resina-reflex","title":"HeyGears Reflex Resin Tank - Standard resin tank for Reflex and Reflex Turbo","description":"\u003ch2\u003eHeyGears Standard Resin Tank for Reflex and Reflex Turbo\u003c\/h2\u003e\n\u003cp\u003eStandard tank, without Pulsing Release, for the first generation of the Reflex. It works with the Reflex and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e, and HeyGears describes it as easy to install and swap.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex and Reflex Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating:\u003c\/strong\u003e compatible with the Reflex's automatic heating. On the Turbo, the heated tray raises the resin from 10 °C to 22 °C in about 20 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Pulsing Release Module:\u003c\/strong\u003e this is the tank for printing without the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting film:\u003c\/strong\u003e HeyGears rates the Reflex film for 45,000 layers or more, and the printer lets you know when it's time to replace it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy get a second tank\u003c\/h3\u003e\n\u003cp\u003eSo you can keep one tank per resin and avoid emptying and cleaning it every time you switch materials. And if you have the Pulsing Release Module, you can print resins that aren't compatible with it without removing the Pulsing tank.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the resins HeyGears approves for the Reflex and Reflex Turbo without the module: PAS10, PARP10, PAWR10, PAP10, PAF10, PAT10, PAU10, PAU11, PAM10, PAH10 and the water-washable PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePAC10, PAE10, PAU20 and PAH270 require the Pulsing Release Module and its \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex\"\u003ePulsing Release tank for Reflex\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the Reflex RS, RS Turbo, Reflex 2 or Reflex 2 Pro.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\n\u003cp\u003eThe film and the tank don't have the same lifespan. The Reflex counts the printed layers and alerts you when the film is reaching the end of its life; HeyGears sells replacement film in packs of two and has a replacement video on its wiki. Replace the whole tank if the frame gets damaged or if you want one per resin.\u003c\/p\u003e\n\n\u003ch3\u003eFilm care\u003c\/h3\u003e\n\u003cp\u003eHeyGears lists three common causes of film damage or leaks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning by hand:\u003c\/strong\u003e use the \u003cem\u003eResin Tank Cleaning\u003c\/em\u003e function and the debris removal tool. Don't pull cured resin off with your fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured debris:\u003c\/strong\u003e check the tank before and after every print. A piece of debris pressed by the build plate can tear the film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorn film:\u003c\/strong\u003e replace it promptly when the printer alerts you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo clean the tank, use isopropyl alcohol and a lint-free cloth. You'll find them in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eFor standard, high-detail or water-washable resins, this one. For castable, elastic, tooling or high-temperature resins, you need the Pulsing Release tank with the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex\"\u003ePulsing Release Module kit for Reflex\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex Turbo?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears lists it as compatible with the Reflex and Reflex Turbo.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The module requires the Pulsing Release tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it heat the resin?\u003c\/h4\u003e\n\u003cp\u003eHeating is done by the printer's tray, and HeyGears lists this tank as compatible with it.\u003c\/p\u003e\n\u003ch4\u003eHow often should the film be replaced?\u003c\/h4\u003e\n\u003cp\u003eHeyGears rates the Reflex film for 45,000 layers or more. The printer keeps count and alerts you.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAU20 with this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. PAU20, PAC10, PAE10 and PAH270 require the Pulsing Release module and tank.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eNo. The RS has its own resin tank.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384121082193,"sku":"DIST-6971437942048","price":106.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-de-resina-reflex.jpg?v=1792509433","url":"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex","provider":"Mr Resin","version":"1.0","type":"link"}