{"product_id":"heygears-tanque-pulsing-release-reflex-2","title":"HeyGears Reflex 2 Series Pulsing Release Resin Tank - Pulsing Release Tank for Reflex 2 and Reflex 2 Pro","description":"\u003ch2\u003eHeyGears Pulsing Release Tank for Reflex 2 and Reflex 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThis is the tank the Pulsing Release Module 2 needs to work on the Reflex 2 series. HeyGears states that the module must always be used with this tank: the standard Reflex 2 tank does not support pulse printing. It fits the Reflex 2 and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e Pulsing Release Module 2. The first-generation module is for the Reflex and RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEssential for:\u003c\/strong\u003e PAC10, PAE10, PAU20 and PAH270 on the Reflex 2 series, which HeyGears only allows with the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e easy to fit and swap, according to HeyGears.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat the Pulsing Release Module 2 does\u003c\/h3\u003e\n\u003cp\u003eThe module inflates and deflates the tank film to release each layer with roughly 50 % less force. HeyGears cites up to 60 % fewer supports, up to 54 % less contact area, pillars of 1 mm or less with a better finish, and thin walls of 3 mm or less with fewer layer lines.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you buy the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-reflex-2-sin-tanque\"\u003ePulsing Release Module 2 without tank\u003c\/a\u003e, you need this tank.\u003c\/li\u003e\n\u003cli\u003eIf you buy the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-pulsing-release-module-kit-reflex-2\"\u003ePulsing Release Module 2 kit for Reflex 2\u003c\/a\u003e, one is already included; this one works as a second tank or a replacement.\u003c\/li\u003e\n\u003cli\u003eResins that require the module: \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-casting-pac10-calcinable-1kg\"\u003ePAC10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the module: PAWW10 and \u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e. Use the standard tank for these.\u003c\/li\u003e\n\u003cli\u003eNot suitable for the Reflex, Reflex Turbo, RS or RS Turbo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTake the tank out, peel off the protective film on the back and remove the four dust-protection stickers from the air inlets.\u003c\/li\u003e\n\u003cli\u003eDo not remove the two tapes on the air channels on the underside.\u003c\/li\u003e\n\u003cli\u003eWith the printer switched off, connect the air tube and the module cable. Switch on and fit the tank, scraper and build plate.\u003c\/li\u003e\n\u003cli\u003eIn Blueprint Studio, create the project selecting the Pulsing Release Module. When printing, the machine checks that the module is connected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaintenance and when to replace it\u003c\/h3\u003e\n\u003cp\u003eCheck for cured residue before and after every print: it damages the film when the build plate lowers. HeyGears sells the Reflex 2 series Pulsing Release film separately, so you only need to replace the whole tank if the frame gets damaged or if you want one tank per resin. To heat the resin, the Reflex 2 series uses the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-rascador-calefactado-reflex-2\"\u003eheated scraper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cp\u003eIf you only use standard, high-detail or water-washable resins, the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-tanque-de-resina-reflex-2\"\u003estandard Reflex 2 tank\u003c\/a\u003e is all you need. If you are going to print castable, elastic, tooling or high-temperature resins, you need this tank with the module.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it work with the Reflex RS Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. The Reflex 2 series uses the Pulsing Release Module 2.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit the Reflex 2 Pro?\u003c\/h4\u003e\n\u003cp\u003eYes, HeyGears lists it as compatible with the Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eCan I print PAH270 without this tank?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears requires the Pulsing Release Module 2 for PAH270, and the module requires this tank.\u003c\/p\u003e\n\u003ch4\u003eWhat about water-washable resins?\u003c\/h4\u003e\n\u003cp\u003ePAWW10 and PAWW20 are not compatible with the module. Use the standard tank.\u003c\/p\u003e\n\u003ch4\u003eCan I remove the tapes on the underside?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears states that the two tapes on the air channels must stay in place.\u003c\/p\u003e\n\u003ch4\u003eCan the film be replaced?\u003c\/h4\u003e\n\u003cp\u003eYes. HeyGears sells it separately in a pack of two.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384203428177,"sku":"DIST-6971437943458","price":234.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/heygears-tanque-pulsing-release-reflex-2.jpg?v=1792509546","url":"https:\/\/mrresin.es\/en\/products\/heygears-tanque-pulsing-release-reflex-2","provider":"Mr Resin","version":"1.0","type":"link"}