{"product_id":"raise3d-tough-2k-resina-df2","title":"Raise3D Tough 2K - Resin for DF2 1 kg","description":"\u003ch2\u003eRaise3D Tough 2K: ABS-Like Tough Resin for Functional Parts (1 kg)\u003c\/h2\u003e\u003cp\u003eTough 2K is Raise3D's resin for parts that actually work, assemble, and take a hit. Raise3D describes it as having strength and stiffness similar to ABS, with good ductility. The numbers back it up: 45 MPa tensile strength, 35% elongation at break, and a 2158 MPa modulus. You'll see it used in enclosures, tooling, manufacturing aids, and prototypes that need to hold up to real-world use.\u003c\/p\u003e\u003ch3\u003eKey Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eABS-like mechanical behavior per Raise3D.\u003c\/li\u003e\n\u003cli\u003e35% elongation at break (post-cured); 59% in green state.\u003c\/li\u003e\n\u003cli\u003e45 MPa tensile strength and 2158 MPa Young's modulus.\u003c\/li\u003e\n\u003cli\u003e31 J\/m notched Izod impact strength.\u003c\/li\u003e\n\u003cli\u003eHDT of 68 °C at 0.45 MPa.\u003c\/li\u003e\n\u003cli\u003eGray color (PMS 7543 C \/ RAL 7040), Shore 87D hardness.\u003c\/li\u003e\n\u003cli\u003e1 kg cartridge for the DF2 and DF2+.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat Parts Is It Good For?\u003c\/h3\u003e\u003cp\u003eEnclosures and snap-fit boxes, screw-mounted parts, guides, and tooling that someone is going to handle every day. That 35% elongation is what sets it apart — the part warns you before it breaks. Raise3D even illustrates it in their datasheet with an FPGA enclosure, which is exactly that kind of use case.\u003c\/p\u003e\u003ch3\u003eTough 2K or Rigid 3K?\u003c\/h3\u003e\u003cp\u003eIf the part needs to flex or absorb impact, go with Tough 2K. If it needs to be stiffer or handle higher temperatures, Rigid 3K is the better choice (97 °C HDT vs. 68 °C).\u003c\/p\u003e\u003ch3\u003eDoes It Work on Printers Other Than the DF2?\u003c\/h3\u003e\u003cp\u003eRaise3D only offers this resin for their DLP ecosystem — the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/raise3d-df2-complete-solution-package\"\u003eDF2\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/raise3d-df2-complete-solution-package-1\"\u003eDF2+\u003c\/a\u003e. It comes in the 1 kg cartridge that feeds directly into these machines' automatic resin system, and the DF2 verifies the resin type via RFID to apply the correct print, wash, and cure profiles through ideaMaker. All datasheet tests were run on a DF2. Raise3D publishes no compatibility data for other 405 nm printers, so I won't sell it to you for that purpose. For other printers, check out the alternatives in our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/durable-3d-resins\"\u003etough resins collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eGray (PMS 7543 C \/ RAL 7040)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiquid Density (ASTM D4052)\u003c\/td\u003e\n\u003ctd\u003e1.150 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid Density (ASTM D792)\u003c\/td\u003e\n\u003ctd\u003e1.20 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity at 25 °C\u003c\/td\u003e\n\u003ctd\u003e481 cps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShore D Hardness\u003c\/td\u003e\n\u003ctd\u003e87D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoung's Modulus (ASTM D638)\u003c\/td\u003e\n\u003ctd\u003e2158 MPa (1334 MPa green)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e45 MPa (25 MPa green)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e35% (59% green)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus (ASTM D790)\u003c\/td\u003e\n\u003ctd\u003e2315 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Strength\u003c\/td\u003e\n\u003ctd\u003e90 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched Izod Impact (ASTM D256)\u003c\/td\u003e\n\u003ctd\u003e31 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 0.45 MPa (ASTM D648)\u003c\/td\u003e\n\u003ctd\u003e68 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT at 1.82 MPa\u003c\/td\u003e\n\u003ctd\u003e53 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWorkflow\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e Raise3D recommends shaking and stirring the cartridge thoroughly, storing it away from UV light, checking that the resin level is sufficient, and filtering out any cured particles between uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting:\u003c\/strong\u003e Use the DF2 or DF2+ with the official Raise3D profile. Test specimens for the datasheet were printed at 100 µm with a 14-second exposure per layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e Use the DF Wash station with either IPA or TPM — the two solvents Raise3D approves for this resin. The DF Wash features dual-turbine agitation, twin-fan drying, and automatic drainage. Profiles load automatically via RFID or can be entered manually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring:\u003c\/strong\u003e Use the DF Cure station, which combines 365, 385, and 405 nm LEDs with hot air up to 120 °C. As a reference, Raise3D cured test specimens for 20 minutes per side at room temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Always wear gloves and avoid any skin contact while the resin is in liquid form.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs it similar to ABS?\u003c\/strong\u003e\u003cbr\u003eRaise3D describes its strength and rigidity as comparable to ABS, with published values of 45 MPa tensile strength and a 2158 MPa modulus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I print clips and snap-fit parts?\u003c\/strong\u003e\u003cbr\u003eYes — this is the most flexible resin in the Raise3D lineup, thanks to its 35% elongation at break, making it well suited for snap-fits and living hinges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the exposure time so long?\u003c\/strong\u003e\u003cbr\u003eRaise3D used 14 seconds per layer at 100 µm for their datasheet test specimens. This is their reference profile; on the DF2, the correct profile is applied automatically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for end-use parts?\u003c\/strong\u003e\u003cbr\u003eYes — Raise3D positions this resin for functional end-use parts where mechanical performance and durability matter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the datasheet values from Raise3D?\u003c\/strong\u003e\u003cbr\u003eYes. All values come from the official Raise3D Technical Data Sheet (TDS), using specimens printed on a DF2 and post-cured in the DF Cure. Raise3D notes that these are typical reference values, and that real-world results will depend on part geometry, print orientation, and process parameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat solvent do I use for washing?\u003c\/strong\u003e\u003cbr\u003eIPA or TPM — both are approved by Raise3D for use with the DF Wash station. Manual washing with IPA also works, but you won't have access to the automatic profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat format does it come in?\u003c\/strong\u003e\u003cbr\u003eIt comes in a 1 kg cartridge, compatible with the DF2's automatic resin feeding system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I store it?\u003c\/strong\u003e\u003cbr\u003eKeep it away from UV light, tightly sealed, and shake it well before each use — as specified in Raise3D's product guidelines.\u003c\/p\u003e","brand":"Raise3D","offers":[{"title":"Default Title","offer_id":55211764810065,"sku":"[S]5.11.19091A01","price":117.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/raise3d-tough-2k-resina-df2-1_663df66a-03f1-4650-9b22-9b969e7cfbdc.jpg?v=1791379714","url":"https:\/\/mrresin.es\/en\/products\/raise3d-tough-2k-resin-df2","provider":"Mr Resin","version":"1.0","type":"link"}