{"product_id":"resina-elegoo-dental-model-naranja-1kg","title":"ELEGOO Dental Model - Orange Dental Model Resin 1 kg","description":"\u003ch2\u003eELEGOO Dental Model Resin – Orange Restorative Dental Model Resin (1 kg)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e The ELEGOO Dental Model is a 405 nm UV resin designed for printing \u003cstrong\u003eworking and restorative dental models\u003c\/strong\u003e: crown, bridge, and implant models, dies, study models, and patient presentation models. According to ELEGOO's technical datasheet, it stands out for its \u003cstrong\u003etoughness\u003c\/strong\u003e (elongation at break of \u003cstrong\u003e25.5%\u003c\/strong\u003e and impact strength of \u003cstrong\u003e192.6 J\/m\u003c\/strong\u003e), its \u003cstrong\u003escratch-resistant surface\u003c\/strong\u003e after post-curing, and its low shrinkage. Available in orange, 1 kg bottle, compatible with 405 nm LCD\/MSLA and DLP printers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e UV resin for restorative dental models (ELEGOO DN series).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary use:\u003c\/strong\u003e Working models for crowns, bridges, and implants; dies; study models; patient presentation models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToughness:\u003c\/strong\u003e 25.5% elongation at break and 192.6 J\/m impact strength — handles daily use and repeated handling without cracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface:\u003c\/strong\u003e Scratch-resistant after post-curing, ideal for fitting and adjusting restorations on the model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 80–85 Shore D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385–410 nm (compatible with 405 nm LCD\/MSLA and DLP printers).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g, orange. ELEGOO part number (P\/N): 50.103.0065.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Is Dental Model Resin Used For?\u003c\/h3\u003e\n\u003cp\u003eIn a digital dentistry workflow, intraoral scans are converted into \u003cstrong\u003ephysical models\u003c\/strong\u003e on which the dental lab does its work: fitting and adjusting crowns, bridges, and implant-supported restorations; checking contact points and occlusion; and presenting the case to the patient. Dental Model resin is purpose-built for this — models that get handled repeatedly, with restorations seated and removed many times, that need to hold their shape and surface detail throughout.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Does Toughness and Scratch Resistance Matter?\u003c\/h3\u003e\n\u003cp\u003eWorking models take a beating: crowns are pressed on and pulled off, instruments pass over the surface, and models get dropped on the bench. A brittle resin chips at the margins — exactly where precision matters most. According to its technical datasheet, Dental Model achieves an \u003cstrong\u003eelongation at break of 25.5%\u003c\/strong\u003e and an \u003cstrong\u003eimpact strength of 192.6 J\/m\u003c\/strong\u003e — figures that place it firmly in tough resin territory — and ELEGOO states that after post-curing the surface offers \u003cstrong\u003egood scratch resistance\u003c\/strong\u003e. The result is models that last the full case without losing detail.\u003c\/p\u003e\n\n\u003ch3\u003eHow Does It Compare to ELEGOO Dental Orthodontic?\u003c\/h3\u003e\n\u003cp\u003eBoth are orange model resins, but they serve different purposes. The \u003ca href=\"https:\/\/mrresin.es\/products\/resina-elegoo-dental-orthodontic-ortodoncia-naranja-1kg\"\u003eDental Orthodontic\u003c\/a\u003e is formulated for thermoforming over orthodontic models — aligners, retainers, and splints. Dental Model is the choice for \u003cstrong\u003eprosthetics and restorative work\u003c\/strong\u003e, with significantly greater toughness: 25.5% vs. 8.4% elongation at break, and 192.6 vs. 74.3 J\/m impact strength.\u003c\/p\u003e\n\n\u003ch3\u003eIs It Compatible With My Printer?\u003c\/h3\u003e\n\u003cp\u003eYes — if your printer uses \u003cstrong\u003e405 nm\u003c\/strong\u003e light, which covers the vast majority of desktop LCD\/MSLA and DLP printers: ELEGOO Mars and Saturn, Anycubic Photon, Creality Halot, Phrozen, and similar machines.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003eData sourced from the official ELEGOO Technical Data Sheet (TDS); ASTM testing at 23 °C.\u003c\/p\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin type\u003c\/td\u003e\n\u003ctd\u003eUV photopolymer for restorative dental models (DN series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContents\u003c\/td\u003e\n\u003ctd\u003e1,000 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e385–410 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity (25 °C)\u003c\/td\u003e\n\u003ctd\u003e250–450 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (25 °C)\u003c\/td\u003e\n\u003ctd\u003e1.05–1.25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e80–85 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum force\u003c\/td\u003e\n\u003ctd\u003e109.9 kgf (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e25.9 MPa (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003e305.9 MPa (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at yield\u003c\/td\u003e\n\u003ctd\u003e5.6% (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e25.5% (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003e22.2 MPa (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003e616.4 MPa (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance\u003c\/td\u003e\n\u003ctd\u003e192.6 J\/m (±10%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e2 years (store at 25–30 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eELEGOO Part No. (P\/N)\u003c\/td\u003e\n\u003ctd\u003e50.103.0065\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eELEGOO Recommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eValues from the official technical datasheet, measured on a 6.6'' mono screen at 3,500–4,500 µW\/cm². Use these as a starting point and fine-tune them for your printer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom layer exposure:\u003c\/strong\u003e 20–30 s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal layer exposure:\u003c\/strong\u003e 2.5–4.5 s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift distance (bottom and normal layers):\u003c\/strong\u003e 6 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift speed:\u003c\/strong\u003e 60 mm\/min for bottom layers, 80 mm\/min for normal layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetract speed:\u003c\/strong\u003e 150 mm\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer height:\u003c\/strong\u003e 0.025–0.05 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUsage Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake the bottle thoroughly\u003c\/strong\u003e before each use and keep it away from direct sunlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint at room temperature\u003c\/strong\u003e (around 25 °C): cold temperatures thicken the resin and increase print failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash with isopropyl alcohol (IPA) or ethanol above 95%\u003c\/strong\u003e for at least 30 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure submerged in water:\u003c\/strong\u003e ELEGOO recommends curing the cleaned model underwater under 405 nm UV light for a hard, scratch-resistant surface finish.\u003c\/li\u003e\n\u003cli\u003eWear gloves and a mask, work in a well-ventilated area, and store the bottle tightly sealed in a cool, dry place away from sunlight and heat sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho Is It For?\u003c\/h3\u003e\n\u003cp\u003eIdeal for \u003cstrong\u003edental labs and clinics\u003c\/strong\u003e working on fixed prosthetics and implant-supported restorations within a digital workflow, as well as students and educators who need durable study models. This is not an intraoral resin — it is a model material only.\u003c\/p\u003e\n\n\u003ch3\u003eWorkflow: Print, Wash, and Cure\u003c\/h3\u003e\n\u003cp\u003ePrint on your 405 nm \u003ca href=\"https:\/\/mrresin.es\/collections\/impresoras-3d-resina\"\u003eresin 3D printer\u003c\/a\u003e, then wash and post-cure in a \u003ca href=\"https:\/\/mrresin.es\/collections\/maquinas-lavado-curado-wash-cure\"\u003ewash and cure station\u003c\/a\u003e. If you also cast metal, the \u003ca href=\"https:\/\/mrresin.es\/products\/resina-elegoo-dental-castable-calcinable-verde-1kg\"\u003eELEGOO Dental Castable\u003c\/a\u003e lets you print crown and framework patterns to fit over these models. Browse the full range at \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas-3d-elegoo\"\u003eELEGOO resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions about ELEGOO Dental Model\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is ELEGOO Dental Model resin used for?\u003c\/strong\u003e\u003cbr\u003eFor printing working and restorative dental models: crown, bridge, and implant models, dies, study models, and presentation models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it durable?\u003c\/strong\u003e\u003cbr\u003eYes. According to ELEGOO's technical datasheet, it has 25.5% elongation at break and 192.6 J\/m impact resistance, so it can handle drops and everyday handling without cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it scratch when testing crowns?\u003c\/strong\u003e\u003cbr\u003eAfter post-curing in water under UV light, ELEGOO states that the surface has good scratch resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used intraorally?\u003c\/strong\u003e\u003cbr\u003eNo. This is a model resin, not a biocompatible material approved for use in the mouth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for thermoforming aligners?\u003c\/strong\u003e\u003cbr\u003eFor orthodontics and thermoforming, ELEGOO makes a dedicated resin: the Dental Orthodontic. The Dental Model is designed for prosthetics and restorations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat exposure settings should I use?\u003c\/strong\u003e\u003cbr\u003eELEGOO recommends 20–30 s for base layers and 2.5–4.5 s per layer (based on a 6.6'' mono LCD screen). Use these as a starting point and fine-tune with a calibration test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with my ELEGOO, Anycubic, or Creality printer?\u003c\/strong\u003e\u003cbr\u003eYes, as long as it's a 405 nm LCD\/MSLA or DLP printer, such as the ELEGOO Mars and Saturn, Anycubic Photon, or Creality Halot series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I wash it?\u003c\/strong\u003e\u003cbr\u003eUse isopropyl alcohol (IPA) or ethanol above 95%, washing for at least 30 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the shelf life?\u003c\/strong\u003e\u003cbr\u003eTwo years, when kept tightly sealed and stored at 25–30 °C in a dry place away from direct sunlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it orange?\u003c\/strong\u003e\u003cbr\u003eWarm, opaque tones provide high contrast, making it easy to see margins, contacts, and anatomical details clearly — with a look reminiscent of traditional plaster models.\u003c\/p\u003e","brand":"Elegoo","offers":[{"title":"Default Title","offer_id":55155770458449,"sku":"50.103.0065","price":58.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/elegoo-dental-model-resina-modelos-dentales-naranja-1kg-bote.png?v=1790953685","url":"https:\/\/mrresin.es\/en\/products\/resin-elegoo-dental-model-orange-1kg","provider":"Mr Resin","version":"1.0","type":"link"}