{"product_id":"resina-heygears-ultraprint-paf10-flexible-1kg","title":"HeyGears UltraPrint PAF10 - PVC-Like Flexible Resin for Reflex 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAF10: PVC-like flexible resin for HeyGears Reflex, in volcanic grey and clear\u003c\/h2\u003e\n\u003cp\u003ePAF10 is HeyGears' flexible production resin. It behaves like PVC: it bends without breaking, survives drops and doesn't crack over time. It's designed mainly for figures and gaming miniatures that are meant to be played with, not just looked at, and in its clear version also for electronics parts and industrial prototypes. 1 kg bottle.\u003c\/p\u003e\n\u003cp\u003eIt's an UltraPrint resin for HeyGears Reflex printers: \u003cstrong\u003e385 nm\u003c\/strong\u003e on the Reflex, Reflex Turbo, Reflex 2 and 2 Pro, and \u003cstrong\u003e405 nm\u003c\/strong\u003e on the Reflex RS and RS Turbo. \u003cstrong\u003eIt is not suitable for generic 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen...). If you don't have a Reflex, don't order it.\u003c\/p\u003e\n\n\u003ch3\u003eKey points\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro; 405 nm on the Reflex RS and RS Turbo. Only validated on HeyGears printers, not on 405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC-like flexibility:\u003c\/strong\u003e 46 % elongation at break in volcanic grey and 34 % in clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery tough:\u003c\/strong\u003e work of fracture of 5.390 J\/m² (volcanic grey), resistant to repeated bending.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e 82 % light transmission and no yellowing during prolonged use and storage, according to HeyGears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail:\u003c\/strong\u003e minimum embossed detail of 0,08 mm and almost invisible layer lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 1 % (clear) and 1,6 % (volcanic grey).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not require the Pulsing Release Module.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1.000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eGaming miniatures get dropped, knocked about in the case and break at their thinnest parts: swords, wings, spears. With a rigid resin, that's one less piece. PAF10 is made to solve that problem. HeyGears markets it as a gaming miniature resin that survives drops, doesn't crack or chip and bends noticeably without breaking.\u003c\/p\u003e\n\u003cp\u003eEach colour has its own use:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolcanic grey:\u003c\/strong\u003e figures, miniatures and busts. Smooth surface with almost invisible layers, a good tone for seeing detail and for priming. It's the most flexible and most impact-resistant variant (52 J\/m).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e parts that need to be seen through or let light pass. HeyGears recommends it for figures, consumer electronics parts and industrial prototypes. HeyGears also sells it in a bundle with UltraGlaze ClearG115 Gloss varnish for a glossier finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility: HeyGears printers and Pulsing Release Module\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears, PAF10 is compatible with the Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro, using the HeyGears Blueprint process packages. HeyGears notes that compatibility is being updated and that Blueprint is the reference. It does not require the Pulsing Release Module (PRM).\u003c\/p\u003e\n\u003cp\u003eAbout the light source: the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro work at 385 nm; the Reflex RS and RS Turbo at 405 nm. HeyGears validates it on both families, always with its own profiles. That doesn't make it a resin for any 405 nm printer.\u003c\/p\u003e\n\u003cp\u003eIf you use the PRM on a Reflex RS or RS Turbo, PAF10 is on the kit's list of compatible resins. Printers in our shop: \u003ca href=\"https:\/\/mrresin.es\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e, \u003ca href=\"https:\/\/mrresin.es\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e. More in \u003ca href=\"https:\/\/mrresin.es\/collections\/impresoras-3d-resina\"\u003eresin 3D printers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eData from the HeyGears technical data sheet (TDS), version 2.0 of 02.2026. Average laboratory values with a deviation of ±10 %.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eVolcanic grey\u003c\/th\u003e\n\u003cth\u003eClear\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact strength (notched)\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e52 J\/m\u003c\/td\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e46 %\u003c\/td\u003e\n\u003ctd\u003e34 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e5.390 J\/m²\u003c\/td\u003e\n\u003ctd\u003e4.780 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e930 MPa\u003c\/td\u003e\n\u003ctd\u003e1.200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e28 MPa\u003c\/td\u003e\n\u003ctd\u003e32 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e39 MPa\u003c\/td\u003e\n\u003ctd\u003e40 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0,455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e38 °C\u003c\/td\u003e\n\u003ctd\u003e40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e75 Shore D\u003c\/td\u003e\n\u003ctd\u003e75 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e1,6 %\u003c\/td\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e550 mPa·s\u003c\/td\u003e\n\u003ctd\u003e700 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmission\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e82 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 385 nm (Reflex, Reflex Turbo, Reflex 2\/2 Pro) and 405 nm (Reflex RS\/RS Turbo), always with HeyGears profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e 124 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1,0-1,5 g\/cm³ at 25 °C (safety data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamp heat test:\u003c\/strong\u003e IEC 60068-2-78, listed as passed in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word of caution about \"flexible\": at 75 Shore D it isn't rubber. It's a tough plastic that gives and springs back, like rigid PVC, not a soft material. If you're looking for a silicone-like feel, check out PAE10.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003eHeyGears does not publish exposure or curing times in the TDS. The parameters are included in the HeyGears Blueprint process packages and the Reflex applies them automatically.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle. The clear version is slightly more viscous (700 mPa·s).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashing:\u003c\/strong\u003e use the solvent specified in the process package. The \u003ca href=\"https:\/\/mrresin.es\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e is the washing station for the Reflex platform. For manual washing, see \u003ca href=\"https:\/\/mrresin.es\/collections\/alcohol-y-postprocesado\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing:\u003c\/strong\u003e the HeyGears \u003ca href=\"https:\/\/mrresin.es\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e or any \u003ca href=\"https:\/\/mrresin.es\/collections\/maquinas-lavado-curado-wash-cure\"\u003ewash and cure\u003c\/a\u003e station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear:\u003c\/strong\u003e to get it as clear as possible, ClearG115 Gloss varnish is the option recommended by the manufacturer itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eThe HeyGears safety data sheet (SDS) classifies it with the signal word \"Warning\" and the following hazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH302: harmful if swallowed.\u003c\/li\u003e\n\u003cli\u003eH315: causes skin irritation.\u003c\/li\u003e\n\u003cli\u003eH317: may cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eH319: causes serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eH335: may cause respiratory irritation.\u003c\/li\u003e\n\u003cli\u003eH373: may cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNitrile gloves, safety glasses and ventilation. If it gets on your skin, wash with soap and water. Keep the bottle closed in a cool, dry, ventilated place, away from heat. Don't pour liquid resin down the drain: cure it and dispose of it according to local regulations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAF10\u003c\/strong\u003e: figures that get dropped and bent, and tough clear parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/products\/resina-heygears-ultraprint-pap10-alto-detalle-1kg\"\u003ePAP10\u003c\/a\u003e: finer detail and more rigidity, for display miniatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/products\/resina-heygears-ultraprint-pawr10-resistente-al-desgaste-1kg\"\u003ePAWR10\u003c\/a\u003e: rigid parts subject to friction, with a scratch-resistant 2H surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/products\/resina-heygears-ultraprint-pae10-elastica-1kg\"\u003ePAE10\u003c\/a\u003e: genuine silicone-like feel (49 Shore A, 433 % elongation). Requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/products\/resina-heygears-ultraprint-pat10-transparente-1kg\"\u003ePAT10\u003c\/a\u003e: rigid clear modelling resin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore options in \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas-3d-flexibles\"\u003eflexible resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas-3d-transparentes\"\u003eclear resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e405 nm LCD printers from other brands.\u003c\/li\u003e\n\u003cli\u003eSoft rubber-like or gasket parts: it's a tough PVC-like material, not an elastomer.\u003c\/li\u003e\n\u003cli\u003eParts left in the sun in a car or near heat: heat deflection at 38-40 °C.\u003c\/li\u003e\n\u003cli\u003eRigid precision parts that must not give: there are more rigid resins in the range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAF10 work on Elegoo, Anycubic or Phrozen printers?\u003c\/h4\u003e\n\u003cp\u003eWe don't sell it for that. It's a resin for the HeyGears Reflex series (385 nm, and 405 nm on the RS and RS Turbo), with parameters in HeyGears Blueprint. There are no official profiles for generic 405 nm LCD printers.\u003c\/p\u003e\n\u003ch4\u003eIs it a 385 nm or a 405 nm resin?\u003c\/h4\u003e\n\u003cp\u003eBoth, but only within the HeyGears range. The Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro cure it at 385 nm; the Reflex RS and RS Turbo at 405 nm. In both cases with HeyGears Blueprint profiles. The fact that it works on an RS at 405 nm doesn't mean it works on any 405 nm printer.\u003c\/p\u003e\n\u003ch4\u003eDoes it require the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. It works with the standard vat. If you have the PRM on a Reflex RS or RS Turbo, it's also on the compatibility list.\u003c\/p\u003e\n\u003ch4\u003eIs it soft like rubber?\u003c\/h4\u003e\n\u003cp\u003eNo. It's 75 Shore D. It bends and springs back without breaking, like PVC, but it's a plastic. For a silicone-like feel, there's PAE10.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between volcanic grey and clear?\u003c\/h4\u003e\n\u003cp\u003eVolcanic grey is more flexible (46 % elongation) and more impact-resistant (52 J\/m). Clear lets through 82 % of light, absorbs less water (1 %) and is slightly more rigid.\u003c\/p\u003e\n\u003ch4\u003eDoes the clear version yellow?\u003c\/h4\u003e\n\u003cp\u003eHeyGears markets it as a resin that doesn't yellow during prolonged use or storage.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for gaming miniatures?\u003c\/h4\u003e\n\u003cp\u003eThat's its main use. HeyGears presents it for miniatures that survive drops, resist cracking and chipping, and have a smooth surface with almost invisible layers.\u003c\/p\u003e\n\u003ch4\u003eWhat is the ClearG115 bundle?\u003c\/h4\u003e\n\u003cp\u003eHeyGears offers clear PAF10 together with its UltraGlaze ClearG115 Gloss varnish to add gloss and transparency to your part. Here you can get it separately.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Transparent","offer_id":55384207688017,"sku":"DIST-6971437944080","price":55.48,"currency_code":"EUR","in_stock":true},{"title":"Volcanic grey","offer_id":55384207720785,"sku":"DIST-6971437941928","price":48.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-paf10-gris-volcanico-1kg.jpg?v=1792509643","url":"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paf10-flexible-1kg","provider":"Mr Resin","version":"1.0","type":"link"}