{"product_id":"resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg","title":"HeyGears UltraPrint PAH10 - Rigid High-Temperature Resin for Moulds 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAH10: rigid high-temperature resin for moulds and tooling\u003c\/h2\u003e\n\u003cp\u003eUltraPrint-Molding PAH10 is HeyGears' resin for parts that have to withstand heat and load without deforming. It is very stiff (flexural modulus of up to 3,350 MPa), has a heat deflection temperature of 110 °C in the Clear Tan colour and is mainly used for silicone moulds, tooling and functional prototypes that run hot. We sell it in a 1 kg bottle and in two colours: Clear Tan and Black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeads up before you buy, because each colour works on different printers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan: 385 nm only.\u003c\/strong\u003e Only on HeyGears UltraCraft Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBlack: 385 nm and also HeyGears' 405 nm Reflex RS \/ RS Turbo.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeither is validated on 405 nm LCD printers from other brands (Elegoo, Anycubic, Phrozen, Creality...). The fact that Black works on the RS doesn't mean it works on any 405 nm printer: it relies on the HeyGears profiles in Blueprint. If you have a printer from another brand, check out our \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas-3d-405nm\"\u003e405 nm resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat deflection temperature (HDT at 0.455 MPa):\u003c\/strong\u003e 110 °C in Clear Tan and 95 °C in Black.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh stiffness:\u003c\/strong\u003e tensile modulus of 3,330 MPa (Clear Tan) and 3,150 MPa (Black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 140 MPa and 136 MPa respectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted part tolerance:\u003c\/strong\u003e ±0.05 mm according to HeyGears (measured with Black).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgeing:\u003c\/strong\u003e passes 600 h of UV (ASTM G154) and 1,600 h of accelerated thermal ageing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e Clear Tan 385 nm only (UltraCraft Reflex series). Black at 385 nm and on the 405 nm Reflex RS \/ RS Turbo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1,000 g bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTwo colours, two behaviours\u003c\/h3\u003e\n\u003cp\u003eThey're not the same material dyed a different colour. HeyGears provides different data for each:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan:\u003c\/strong\u003e the one with the highest heat resistance (HDT 110 °C) and slightly higher tensile strength. HeyGears recommends it for silicone moulds, prototypes and end-use parts with moderate thermal demands, such as intake or exhaust ducts on RC cars that run at around 100 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e designed for structures that bear continuous load. Its strong point is long-term resistance to deformation. It's used for structural parts, inserts, component housings and tooling for silicone moulding. It withstands slightly less heat (HDT 95 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMoulds and dies for casting silicone, where the mould has to hold its shape under heat.\u003c\/li\u003e\n\u003cli\u003eFunctional prototypes that need stiffness and creep resistance (so they don't \"give\" over time under load).\u003c\/li\u003e\n\u003cli\u003eParts near heat sources: ducts, motor mounts, housings.\u003c\/li\u003e\n\u003cli\u003eTooling, jigs and workshop fixtures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is an engineering resin. If you're looking for other heat-resistant options, take a look at our \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas-3d-resistentes-altas-temperaturas\"\u003ehigh-temperature resistant resins\u003c\/a\u003e and \u003ca href=\"https:\/\/mrresin.es\/collections\/resinas-de-ingenieria\"\u003eengineering resins\u003c\/a\u003e collections.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility: which printers it works with\u003c\/h3\u003e\n\u003cp\u003eAccording to HeyGears' compatibility table:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Tan:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2, Reflex 2 Pro (385 nm) and also Reflex RS \/ RS Turbo (405 nm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional for both colours. Works with the standard tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrint profiles are selected in HeyGears' Blueprint software. If you don't have a printer yet, the \u003ca href=\"https:\/\/mrresin.es\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eUltraCraft Reflex Turbo\u003c\/a\u003e and the \u003ca href=\"https:\/\/mrresin.es\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eUltraCraft Reflex 2 Pro\u003c\/a\u003e work at 385 nm. The \u003ca href=\"https:\/\/mrresin.es\/products\/impresora-3d-heygears-ultracraft-reflex-rs-turbo\"\u003eReflex RS Turbo\u003c\/a\u003e is 405 nm and only supports the Black colour: if you have an RS, don't order Clear Tan.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eClear Tan\u003c\/th\u003e\n\u003cth\u003eBlack\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (0.455 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e110 °C\u003c\/td\u003e\n\u003ctd\u003e95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e3,330 MPa\u003c\/td\u003e\n\u003ctd\u003e3,150 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e81 MPa\u003c\/td\u003e\n\u003ctd\u003e75 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e3,350 MPa\u003c\/td\u003e\n\u003ctd\u003e3,050 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e140 MPa\u003c\/td\u003e\n\u003ctd\u003e136 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e6 %\u003c\/td\u003e\n\u003ctd\u003e7 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e35 J\/m\u003c\/td\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e3,550 J\/m²\u003c\/td\u003e\n\u003ctd\u003e3,050 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e87 Shore D\u003c\/td\u003e\n\u003ctd\u003e89 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.6 %\u003c\/td\u003e\n\u003ctd\u003e0.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e660 mPa·s\u003c\/td\u003e\n\u003ctd\u003e750 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003ctd\u003e600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated thermal ageing\u003c\/td\u003e\n\u003ctd\u003eYY\/T 0681.1\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003ctd\u003e1,600 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average values with a deviation of ±10 %. According to the manufacturer, 600 h of UV is equivalent to around 8 years indoors or 1 year outdoors with less than 30 % loss of properties.\u003c\/p\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003ch4\u003eBefore printing\u003c\/h4\u003e\n\u003cp\u003eShake the bottle well and stir the resin in the tank before each print. If the resin is going to sit unused for more than 3 days, filter it and return it to the bottle. HeyGears recommends not leaving it in the tank for more than 7 days.\u003c\/p\u003e\n\u003ch4\u003eWashing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-stage wash with IPA or 95 % alcohol: a first pass with used alcohol and a second with clean alcohol.\u003c\/li\u003e\n\u003cli\u003eIn the \u003ca href=\"https:\/\/mrresin.es\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e (Black profile): 250 rpm, 2 min + 2 min. In an ultrasonic cleaner: 1 min + 2 min.\u003c\/li\u003e\n\u003cli\u003eDon't leave the part in alcohol for more than 10 minutes in total. Dry it with compressed air or for 10 minutes at 50 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll find isopropyl alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/collections\/alcohol-y-postprocesado\"\u003epost-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003ePost-curing\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies heated post-curing: \u003cstrong\u003e60 °C for 60 minutes\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e, Performance mode. The properties in the table were measured with this cure. If you cure with another machine without heat, don't expect to reach the same heat deflection temperature.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, the liquid resin carries the signal word \"Warning\" and the following hazard statements: H302 (harmful if swallowed), H315 (causes skin irritation), H317 (may cause an allergic skin reaction), H319 (causes serious eye irritation), H335 (may cause respiratory irritation) and H373 (may cause damage to organs through prolonged or repeated exposure).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear nitrile gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eFlash point: 123 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore between 15 and 28 °C, away from light and tightly closed. Shelf life of 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich HeyGears resin should you choose?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePAH10:\u003c\/strong\u003e the balance between stiffness and temperature (95-110 °C). No mandatory Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/products\/resina-heygears-ultraprint-pah270-alta-temperatura-1kg\"\u003ePAH270\u003c\/a\u003e:\u003c\/strong\u003e if you need to withstand much more heat (HDT of 270 °C), for example for injection moulds. It's more brittle and requires the Pulsing Release Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/products\/resina-heygears-ultraprint-pau20-utillaje-1kg\"\u003ePAU20\u003c\/a\u003e:\u003c\/strong\u003e polycarbonate-like tooling resin, with higher elongation (23 %) but only 60 °C HDT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/mrresin.es\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e:\u003c\/strong\u003e ABS-like for housings and prototypes without thermal demands (HDT 63 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnyone with a 405 nm LCD printer from another brand. It's not validated outside HeyGears printers.\u003c\/li\u003e\n\u003cli\u003eIf you have a Reflex RS or RS Turbo and want Clear Tan: only Black works on those printers.\u003c\/li\u003e\n\u003cli\u003eParts that need to bend or take impacts: with 6-7 % elongation it's rigid and brittle under impact.\u003c\/li\u003e\n\u003cli\u003eHigh-temperature plastic injection moulds: that's what PAH270 is for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAH10 work on a 405 nm printer like an Elegoo or an Anycubic?\u003c\/h4\u003e\n\u003cp\u003eWe don't recommend it. HeyGears only validates it on its own printers and with its Blueprint profiles. Clear Tan is only for the 385 nm Reflex printers. Black also works on the 405 nm Reflex RS \/ RS Turbo, but not on 405 nm printers from other brands.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between Clear Tan and Black?\u003c\/h4\u003e\n\u003cp\u003eClear Tan withstands higher temperatures (HDT 110 °C vs 95 °C) and is slightly stronger. Black is aimed at structures under continuous load and is the only one that's also compatible with the Reflex RS \/ RS Turbo.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo. For PAH10 it's optional on all compatible printers.\u003c\/p\u003e\n\u003ch4\u003eCan it be used to make silicone moulds?\u003c\/h4\u003e\n\u003cp\u003eYes, it's one of its main uses. Its stiffness and heat resistance help keep the mould from deforming while the silicone is cast and cured.\u003c\/p\u003e\n\u003ch4\u003eHow is it post-cured?\u003c\/h4\u003e\n\u003cp\u003eHeyGears specifies 60 °C for 60 minutes with heat in the UltraCraft Cure (Performance mode). The published properties were measured this way.\u003c\/p\u003e\n\u003ch4\u003eIs it compatible with the Reflex RS?\u003c\/h4\u003e\n\u003cp\u003eOnly the Black colour, according to the manufacturer's compatibility table. Clear Tan is validated on Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/p\u003e\n\u003ch4\u003eHow long does an unopened bottle last?\u003c\/h4\u003e\n\u003cp\u003eShelf life is 18 months, stored between 15 and 28 °C and protected from light and moisture.\u003c\/p\u003e\n\u003ch4\u003eWhere is it shipped from?\u003c\/h4\u003e\n\u003cp\u003eWe ship it from our official distributor in Europe.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Black","offer_id":55384206770513,"sku":"DIST-6971437941935","price":104.99,"currency_code":"EUR","in_stock":true},{"title":"Light brown","offer_id":55384206803281,"sku":"DIST-6971437941560","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-heygears-ultraprint-pah10-negro-1kg.jpg?v=1792509620","url":"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pah10-moldes-alta-temperatura-1kg","provider":"Mr Resin","version":"1.0","type":"link"}