{"product_id":"resina-heygears-ultraprint-pat10-transparente-1kg","title":"HeyGears UltraPrint PAT10 - Clear Resin 385 nm 1 kg","description":"\u003ch2\u003eHeyGears UltraPrint PAT10: 385 nm clear resin with an acrylic-like finish\u003c\/h2\u003e\n\u003cp\u003ePAT10 is HeyGears' clear resin. It transmits 88.5 % of light with just 5.4 % haze, so with a good finish it looks like acrylic. It's tough, won't crack even if it falls off the table, and is formulated not to yellow: HeyGears cites stable colour for 8 years indoors. It comes in a 1 kg bottle and is only for HeyGears Reflex 385 nm printers.\u003c\/p\u003e\n\u003cp\u003eUse it for clear parts on figures, scale modelling accessories, prototypes, electronics components and even end-use parts. According to HeyGears, it can also be used for wearable products that are in contact with the skin.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy: this is a 385 nm resin for certain HeyGears printers only\u003c\/h3\u003e\n\u003cp\u003eUltraPrint resins are formulated for the HeyGears Reflex series, and each one has its print profile already tuned in Blueprint, the brand's software. PAT10 is only validated on Reflex printers that use 385 nm UV light (385+ nm, according to HeyGears):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible:\u003c\/strong\u003e Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible:\u003c\/strong\u003e Reflex RS and Reflex RS Turbo (405 nm). HeyGears doesn't include them in its list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not a resin for standard 405 nm LCD printers\u003c\/strong\u003e (Elegoo, Anycubic, Phrozen, Creality and similar). HeyGears doesn't provide profiles for them or validate it outside the 385 nm Reflex printers. If you're looking for a clear resin for another printer, check out our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/transparent-3d-resins\"\u003eclear 3D resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparency:\u003c\/strong\u003e 88.5 % light transmission and 5.4 % haze (ASTM D1003)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-yellowing:\u003c\/strong\u003e passes 600 h of UV ageing, which HeyGears equates to 8 years indoors or 1 year outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery tough:\u003c\/strong\u003e 13200 J\/m² work of fracture and 25 % elongation at break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e heat deflection at 67 °C at 0.455 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.05 mm on parts up to 20 mm (±0.1 mm up to 50 mm and ±0.2 mm up to 100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin tests:\u003c\/strong\u003e passes cytotoxicity, sensitisation and skin irritation (ISO 10993-5, -10 and -23)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water absorption:\u003c\/strong\u003e 0.9 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 1 kg bottle, clear. 385 nm only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat it's for and who it's for\u003c\/h3\u003e\n\u003cp\u003eHeyGears recommends it for four uses: clear parts for figures, consumer electronics prototypes, clear end-use parts and clear applications that must not yellow over time. Its website shows, for example, blocks with dragonflies inside that look like amber or acrylic.\u003c\/p\u003e\n\u003cp\u003eIt's for anyone printing on a 385 nm Reflex who wants real transparency: housings that show what's inside, display pieces or wearable accessories. If toughness is what matters to you, it stands out there too: it has the highest work of fracture of the UltraPrint resins in this selection.\u003c\/p\u003e\n\n\u003ch3\u003eHeyGears printer compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex and Reflex Turbo:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex 2 and Reflex 2 Pro:\u003c\/strong\u003e compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflex RS and Reflex RS Turbo:\u003c\/strong\u003e not compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsing Release Module:\u003c\/strong\u003e optional. With it, you can print finer holes and pillars (0.3 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHeyGears notes that compatibility and process packages are being updated; whatever appears in Blueprint Studio for your printer takes precedence. If you're looking for a compatible machine, check out the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-2-pro\"\u003eReflex 2 Pro\u003c\/a\u003e or the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/impresora-3d-heygears-ultracraft-reflex-turbo\"\u003eReflex Turbo\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmission\u003c\/td\u003e\n\u003ctd\u003eASTM D1003\u003c\/td\u003e\n\u003ctd\u003e88.5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHaze\u003c\/td\u003e\n\u003ctd\u003eASTM D1003\u003c\/td\u003e\n\u003ctd\u003e5.4 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact\u003c\/td\u003e\n\u003ctd\u003eASTM D256\u003c\/td\u003e\n\u003ctd\u003e31 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e25 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork of fracture\u003c\/td\u003e\n\u003ctd\u003eISO 20795-1\u003c\/td\u003e\n\u003ctd\u003e13200 J\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e1620 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e1580 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eASTM D638\u003c\/td\u003e\n\u003ctd\u003e43 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength\u003c\/td\u003e\n\u003ctd\u003eASTM D790\u003c\/td\u003e\n\u003ctd\u003e67 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature at 0.455 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D648\u003c\/td\u003e\n\u003ctd\u003e67 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003ctd\u003e81 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eASTM D570\u003c\/td\u003e\n\u003ctd\u003e0.9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eASTM D4212\u003c\/td\u003e\n\u003ctd\u003e925 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccelerated UV \/ thermal ageing\u003c\/td\u003e\n\u003ctd\u003eASTM G154 \/ -\u003c\/td\u003e\n\u003ctd\u003e600 h \/ 1600 h passed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCytotoxicity, sensitisation and skin irritation\u003c\/td\u003e\n\u003ctd\u003eISO 10993-5, -10, -23\u003c\/td\u003e\n\u003ctd\u003ePassed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHeyGears laboratory data, average of tests with a ±10 % deviation, measured after curing in Performance mode in the UltraCraft Cure.\u003c\/p\u003e\n\u003ch4\u003eMinimum design features\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eStandard tank\u003c\/th\u003e\n\u003cth\u003ePulsing Release tank\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum gap\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum wall\u003c\/td\u003e\n\u003ctd\u003e0.24 mm\u003c\/td\u003e\n\u003ctd\u003e0.22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum hole\u003c\/td\u003e\n\u003ctd\u003e0.5 mm\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pillar\u003c\/td\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnsupported angle\u003c\/td\u003e\n\u003ctd\u003e25°\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eUse and post-processing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore printing:\u003c\/strong\u003e shake the bottle well and stir the resin in the tank. Slice in Blueprint Studio, selecting PAT10. If you're not going to print within 3 days, filter the resin and return it to the bottle; don't leave it in the tank for more than 7 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing:\u003c\/strong\u003e with 95 % alcohol. In the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-wash-estacion-de-lavado\"\u003eUltraCraft Wash\u003c\/a\u003e at 180 rpm, a 3-minute pre-wash with used alcohol and a 3-minute fine wash with clean alcohol; in an ultrasonic cleaner, 3 + 2 minutes. Don't exceed 10 minutes in alcohol in total. Dry with compressed air or in an oven at 40 °C for 10 minutes. You'll find alcohol and accessories in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/alcohol-and-post-processing\"\u003ealcohol and post-processing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePost-curing:\u003c\/strong\u003e in the \u003ca href=\"https:\/\/mrresin.es\/en\/products\/heygears-ultracraft-cure-estacion-de-curado\"\u003eUltraCraft Cure\u003c\/a\u003e you have two options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast:\u003c\/strong\u003e no heat, in air, 7 minutes at room temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e with heat, in air: 15 minutes of preheating at 46 °C, 15 minutes of curing at 46 °C and 25 minutes of baking at 62 °C. This is the mode HeyGears uses to measure the data in the table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt's normal for the part to come out of curing slightly yellowish. HeyGears explains that the tint disappears within a week if you cure in Fast mode, or within 1-2 days in Performance mode. More equipment in \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/wash-cure-machines\"\u003ewash and cure machines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor a crystal-clear finish:\u003c\/strong\u003e wet sand from 400 to 1200 grit, going up in steps of 200 and not moving on to the next grit until you've removed the scratches from the previous one. Clean off the dust with water, then with IPA or 95 % alcohol and a microfibre cloth. Once the part is dry, apply a coat of clear acrylic varnish (car clear coat) or UV varnish. UV varnish gives a better finish, but some can make the part more brittle: test first. The more you sand, the clearer it gets.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cp\u003eAccording to its safety data sheet, PAT10 carries the signal word \"Warning\": it causes skin and eye irritation (H315, H319), may cause an allergic skin reaction (H317) and may cause respiratory irritation (H335).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear gloves and safety glasses, and work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003eIf it gets on your skin, wash with soap and water; if it gets in your eyes, rinse with water and seek medical advice.\u003c\/li\u003e\n\u003cli\u003eFlash point: 130 °C. Not classified as dangerous goods for transport.\u003c\/li\u003e\n\u003cli\u003eStore sealed between 15 and 28 °C, away from sunlight and moisture. Shelf life: 18 months.\u003c\/li\u003e\n\u003cli\u003eDon't pour liquid resin down the drain: cure it in the sun until solid and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe skin tests (ISO 10993) refer to the printed and cured part. This is not a dental or medical resin; for that, see our \u003ca href=\"https:\/\/mrresin.es\/en\/collections\/dental-resins\"\u003edental resins\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one to choose from the UltraPrint range?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pau11-tipo-abs-1kg\"\u003ePAU11\u003c\/a\u003e: ABS-like, opaque grey, for functional parts. Also works on the Reflex RS.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-paww20-lavable-al-agua-1kg\"\u003ePAWW20\u003c\/a\u003e: translucent pink and water-washable, if you don't need true transparency.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pas10-estandar-1kg\"\u003ePAS10\u003c\/a\u003e: the standard matte modelling resin, for opaque figures and prototypes.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pam10-color-1kg\"\u003ePAM10\u003c\/a\u003e: HeyGears' mixable colour resins, if you want to tint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho it's not for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf you have a Reflex RS or RS Turbo: it's not compatible.\u003c\/li\u003e\n\u003cli\u003eIf your printer isn't a HeyGears Reflex.\u003c\/li\u003e\n\u003cli\u003eIf you want maximum transparency without sanding or varnishing: the acrylic-like finish requires working the part.\u003c\/li\u003e\n\u003cli\u003eIf you're looking for a resin for dental or medical use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes PAT10 work on the Reflex RS or RS Turbo?\u003c\/h4\u003e\n\u003cp\u003eNo. HeyGears only lists it as compatible with the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro, which are 385 nm printers.\u003c\/p\u003e\n\u003ch4\u003eWhat about an Elegoo, Anycubic or other 405 nm printer?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a 385 nm resin with no profiles or validation outside the compatible HeyGears Reflex printers.\u003c\/p\u003e\n\u003ch4\u003eDoes it come out clear straight from the printer?\u003c\/h4\u003e\n\u003cp\u003eTo achieve the acrylic-like finish, you need to sand up to 1200 grit and apply clear varnish. HeyGears sums it up like this: the more you sand, the clearer it gets.\u003c\/p\u003e\n\u003ch4\u003eWhy does it turn yellow after curing?\u003c\/h4\u003e\n\u003cp\u003eThat's normal. According to HeyGears, the tint disappears within a week with Fast curing, or within 1-2 days with Performance mode.\u003c\/p\u003e\n\u003ch4\u003eDoes it yellow over the years?\u003c\/h4\u003e\n\u003cp\u003eIt's formulated not to: it passes 600 hours of UV ageing, which HeyGears equates to 8 years indoors with no noticeable colour change.\u003c\/p\u003e\n\u003ch4\u003eCan it be used for parts that touch the skin?\u003c\/h4\u003e\n\u003cp\u003eHeyGears says yes for wearable products: the cured part passes ISO 10993 tests for cytotoxicity, sensitisation and skin irritation. It is not a resin for medical or dental use.\u003c\/p\u003e\n\u003ch4\u003eDo I need the Pulsing Release Module?\u003c\/h4\u003e\n\u003cp\u003eNo, it's optional. With it, you can print holes and pillars down to 0.3 mm.\u003c\/p\u003e\n\u003ch4\u003eWhat temperature can it withstand?\u003c\/h4\u003e\n\u003cp\u003eIts heat deflection temperature is 67 °C at 0.455 MPa.\u003c\/p\u003e","brand":"HeyGears","offers":[{"title":"Default Title","offer_id":55384206508369,"sku":"DIST-6971437941447","price":104.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/0414\/0369\/files\/resina-transparente-heygears-ultraprint-pat10-1kg.jpg?v=1792509612","url":"https:\/\/mrresin.es\/en\/products\/resina-heygears-ultraprint-pat10-transparente-1kg","provider":"Mr Resin","version":"1.0","type":"link"}