🔧2025 Parametros Resina Anycubic🔧 ¡Todos los parametros que necesitas!
2025 Parametros Resina Anycubic. Encuentralos todos aquí.
Hoy tenemos algo muy útil para ti, sobre todo si eres un apasionado de la impresión 3D con resinas de Anycubic. Si alguna vez has sentido que encontrar los parámetros de resina Anycubic correctos para tus impresoras puede ser un dolor de cabeza... ¡Te entendemos!
Tener acceso a la configuración correcta es clave para obtener los mejores resultados, ya sea que estés buscando impresiones rápidas o de calidad premium. Con los parámetros correctos, ahorras tiempo, energía, y, sobre todo, ¡reduces esos fallos inesperados! 😅
Sabemos que la parte técnica de la impresión 3D puede ser un poco abrumadora, pero aquí te dejamos toda la información que necesitas para trabajar con las resinas más populares de Anycubic. Desde la mas reciente Photon Mono M7 Pro hasta la primera impresora de Anycubic SLA, la Photon S, cada impresora tiene sus propios parámetros ideales.
Conocer estos detalles te ayudará a optimizar cada impresión, consiguiendo la mejor calidad posible sin frustraciones. Además, podrás experimentar con mayor libertad, sabiendo que estás usando los parámetros adecuados para cada tipo de resina. 🚀
Antes de adentrarnos, vamos a explicar un poco los conceptos de los software de slicing y a traducirlos.
Que es Layer thickness o Espesor de capa:
Define el grosor de cada capa de resina que se imprime. Capas más finas producen más detalle, mientras que capas más gruesas aceleran el tiempo de impresión.
Que es Exposure time o Tiempo de exposición:
Es el tiempo que la resina queda expuesta a la luz UV para endurecerse en cada capa. Influye en la precisión y durabilidad de la pieza.
Que es el Light-Off Time o Tiempo de apagado:
Tiempo en que la luz UV se apaga entre cada capa. Ayuda a controlar la precisión de las transiciones entre capas.
Que es el Bottom Exposure Time o Tiempo de exposición inferior:
Tiempo de exposición inicial para las capas inferiores. Da una base más fuerte y mejora la adhesión al lecho de impresión.
Que es el Bottom Layer o Capa inferior:
Cantidad de capas que se imprimen inicialmente con mayor exposición para lograr una adhesión sólida en la base.
Que es el Anti-Aliasing Level o Nivel de suavizado:
Ajusta la calidad de los bordes y superficies, eliminando irregularidades visibles en la impresión.
Que es el Z Lift Distance o Distancia de elevación Z:
Indica cuánto se eleva el cabezal en el eje Z entre capas, minimizando la interferencia en capas ya impresas.
Que es el Z Lift Speed o Velocidad de elevación Z:
Velocidad a la que el cabezal se eleva en el eje Z; ayuda a controlar el flujo de resina y evitar burbujas.
Que es el Z Retract Speed o Velocidad de retracción Z:
Velocidad de bajada del cabezal al imprimir una nueva capa; controla el flujo y reduce el riesgo de fallos entre capas.
¡Ahora sí! Los parámetros con cada resina :)
Parametros de configuración para la Resina Eco de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
4s |
0.5s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3.2s |
0.5s |
25s |
4 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2.5s |
50s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
0.1s |
23s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
3s |
0.5s |
23s |
4 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2s |
0.5s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
28s |
4 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2.3s |
0.5s |
23s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
0.05mm |
2.3s |
0.5s |
23s |
6 |
1 |
5mm |
3mm/s |
3mm/s |
|
Photon Mono SE |
0.05mm |
1.5s |
0.5s |
30s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
0.05mm |
8s |
1s |
60s |
6 |
1 |
6mm |
3mm/s |
3mm/s |
Parametros de configuración para la Resina Craftsman DLP de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
4s |
0.5s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
3s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3.4s |
0.5s |
30s |
4 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
3s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
2s |
2.5s |
35s |
6 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono X 6Ks |
0.05mm |
3s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
2s |
0.1s |
23s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
0.5s |
23s |
4 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
0.5s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
4 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
30s |
8 |
1 |
8mm |
4mm/s |
4mm/s |
|
Photon Mono 4K |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono X 6K |
0.05mm |
2.5s |
0.5s |
40s |
8 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono SE |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono |
0.05mm |
2.5s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
Parametros de configuración para la Resina ABS Like Pro 2 de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
4s |
0.5s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3s |
0.5s |
25s |
6 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2.5s |
35s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
0.5s |
25s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
0.5s |
25s |
5 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
0.5s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
5 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
28s |
4 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
0.5s |
25s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono SE |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
Parametros de configuración para la Resina ABS Like V2 al agua de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
3.8s |
0.5s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3s |
0.5s |
25s |
6 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2.5s |
35s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
0.5s |
25s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
0.5s |
25s |
5 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
0.5s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
5 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
28s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
0.5s |
25s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono SE |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
Parametros de configuración para la Resina Rigid 100 - Rígida 100 de Anycubic
|
Modelo de Impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
2s |
35s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro |
0.05mm |
2.8s |
1s |
23s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s |
0.05mm |
2.8s |
1s |
23s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
1s |
23s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2s |
1s |
23s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
5mm |
4mm/s |
6mm/s |
|
Photon Mono M3 Max |
0.05mm |
2.8s |
1s |
30s |
6 |
1 |
8mm |
4mm/s |
4mm/s |
|
Photon Mono X2 |
0.05mm |
2s |
1s |
23s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon X 6K |
0.05mm |
2s |
1s |
25s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono 4K |
0.05mm |
2.5s |
1s |
25s |
6 |
1 |
5mm |
4mm/s |
6mm/s |
Parametros de configuración para la Resina High Speed 2.0 de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.1mm |
1.4s |
0.5s |
15s |
3 |
1 |
4mm |
15mm/s |
15mm/s |
|
Photon Mono M5s Pro |
0.1mm |
1.9s |
0.5s |
15s |
5 |
1 |
3mm |
20mm/s |
20mm/s |
|
Photon Mono M5s |
0.1mm |
1.9s |
0.5s |
15s |
5 |
1 |
3mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.1mm |
2s |
0.5s |
15s |
5 |
1 |
5mm |
6mm/s |
6mm/s |
|
Photon Mono X 6Ks |
0.1mm |
2.5s |
0.5s |
15s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono 2 |
0.1mm |
2.5s |
0.5s |
18s |
5 |
1 |
5mm |
4mm/s |
6mm/s |
|
Photon Mono M3 Max |
0.1mm |
2.8s |
0.5s |
25s |
6 |
1 |
8mm |
4mm/s |
4mm/s |
|
Photon Mono X2 |
0.1mm |
2.5s |
0.5s |
18s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon M3 Premium |
0.1mm |
2.5s |
0.5s |
25s |
5 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon X 6K |
0.1mm |
2s |
0.5s |
18s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono 4K |
0.1mm |
2s |
0.5s |
25s |
6 |
1 |
5mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.1mm |
2.5s |
0.5s |
18s |
5 |
1 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Premium (2) |
0.1mm |
2.5s |
0.5s |
25s |
5 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.1mm |
2s |
0.5s |
18s |
5 |
1 |
5mm |
4mm/s |
6mm/s |
|
Photon M3 Plus |
0.1mm |
1.5s |
0.5s |
18s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
Parametros de configuración para la Resina Bio de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
1.7s |
2s |
35s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro |
0.05mm |
3.2s |
1s |
35s |
6 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
1s |
35s |
6 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono M5s |
0.05mm |
2.8s |
1s |
35s |
6 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
1s |
20s |
6 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon X 6K |
0.05mm |
2s |
1s |
30s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono M3 Max |
0.05mm |
3s |
2s |
35s |
6 |
1 |
10mm |
4mm/s |
4mm/s |
|
Photon Mono D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
1 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
1s |
35s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
8mm |
4mm/s |
4mm/s |
|
Photon Mono X |
0.05mm |
2s |
1s |
28s |
6 |
1 |
8mm |
4mm/s |
4mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
1s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
1s |
28s |
5 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
1s |
28s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
Parametros de configuración para la Resina Tough 2.0 - Resistente 2.0 de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
2s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
1s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
3.8s |
1s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
2.8s |
1s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3s |
1s |
25s |
6 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
1s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2s |
35s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
1s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
1s |
25s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
1s |
25s |
5 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
1s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
5 |
1 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
1s |
28s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
1s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
1s |
28s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono SE |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono |
0.05mm |
2.5s |
1s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
Parametros de configuración para la resina Tough Ultra - Resistente Ultra de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
2s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
1s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
3.8s |
1s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
2.8s |
1s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3s |
1s |
25s |
6 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
1s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2s |
35s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
1s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
1s |
25s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
1s |
25s |
5 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
1s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
5 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
1s |
28s |
4 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
1s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
1s |
28s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono SE |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono |
0.05mm |
2.5s |
1s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
Parametros de configuración para la Resina High Clear - Alta Transparencia de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
4s |
2s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
4s |
0.5s |
35s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
4.5s |
0.5s |
35s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
5s |
0.5s |
35s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
6s |
0.5s |
40s |
4 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
5s |
0.5s |
35s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
4.5s |
2.5s |
30s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
4s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono X2 |
0.05mm |
4s |
0.5s |
25s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
4.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
4.5s |
1s |
35s |
4 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon M3 Plus |
0.05mm |
4s |
0.5s |
28s |
4 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
4s |
0.5s |
25s |
4 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
4s |
0.5s |
25s |
3 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono X |
0.05mm |
4s |
0.5s |
28s |
4 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
4s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
4s |
0.5s |
28s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono SE |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono |
0.05mm |
4s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
0.05mm |
12s |
1s |
60s |
6 |
1 |
6mm |
3mm/s |
3mm/s |
Parametros de configuración para la resina Standard + - Estándar + de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M5s Pro (Modo de impresión normal) |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono M5s (Modo de impresión normal) |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono M5s (Modo de impresión rápida) |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono M5 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon M3 Max |
0.05mm |
3s |
2.5s |
50s |
6 |
1 |
10mm |
10mm/s |
2mm/s |
|
Photon Mono X 6Ks |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono X2 |
0.05mm |
2.5s |
1s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
0.1s |
23s |
3 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
0.5s |
23s |
4 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
1s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
4 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
28s |
4 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
0.5s |
23s |
6 |
1 |
8mm |
8mm/s |
2mm/s |
|
Photon Mono SQ |
0.5mm |
2.3s |
0.5s |
23 |
6 |
1 |
5mm |
3mm/s |
3mm/s |
|
Photon Mono SE |
0.05mm |
1.5s |
0.5s |
30s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono |
0.05mm |
2.5s |
0.5s |
40s |
6 |
1 |
6mm |
6mm/s |
4mm/s |
|
Photon S |
0.05mm |
9s |
1s |
60s |
6 |
1 |
6mm |
6mm/s |
3mm/s |
Parametros de configuración para la Resina Standard V1 - Estándar V1 de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
3.8s |
0.5s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3.2s |
0.5s |
25s |
4 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2.5s |
50s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
0.5s |
25s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.8s |
1s |
30s |
6 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
0.1s |
23s |
3 |
1 |
4mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
0.5s |
23s |
4 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2s |
0.5s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
4 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
28s |
4 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
0.5s |
23s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
0.05mm |
2.3s |
0.5s |
23s |
6 |
1 |
5mm |
3mm/s |
3mm/s |
|
Photon Mono SE |
0.05mm |
1.5s |
0.5s |
30s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
0.05mm |
8s |
1s |
60s |
6 |
1 |
6mm |
3mm/s |
3mm/s |
Parametros de configuración para la Resina Standard V2 - Estándar V2 de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
3.6s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
3.8s |
0.5s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3s |
0.5s |
25s |
6 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2.5s |
35s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
0.5s |
25s |
6 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
0.5s |
25s |
5 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
0.5s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
5 |
4 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
28s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
0.5s |
25s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono SE |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
|
Photon Mono |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
Parametros de configuración para la Resina texture de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono 4 Ultra |
0.05mm |
3s |
1s |
35s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono 4 |
0.05mm |
2.4s |
1s |
30s |
5 |
1 |
5mm |
8mm/s |
8mm/s |
|
Photon Mono M7 |
0.05mm |
2.2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M7 Pro |
0.05mm |
2s |
1s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro |
0.05mm |
3.6s |
1s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s |
0.05mm |
2.8s |
1s |
30s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
1s |
30s |
5 |
1 |
8mm |
5mm/s |
6mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
1s |
20s |
5 |
1 |
8mm |
3mm/s |
4mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono M3 Max |
0.05mm |
3s |
2s |
35s |
6 |
1 |
10mm |
4mm/s |
4mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
8mm |
4mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
1s |
35s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon X 6K |
0.05mm |
2s |
1s |
30s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
1s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
1 |
5mm |
2mm/s |
3mm/s |
Parametros de configuración para la Resina Lavable al agua + - Water Wash + de Anycubic
|
Modelo de impresora |
Layer Thickness |
Exposure Time |
Light-Off Time |
Bottom Exposure Time |
Bottom Layer |
Anti-Aliasing Level |
Z Lift Distance |
Z Lift Speed |
Z Retract Speed |
|
Photon Mono M7 Pro |
0.05mm |
2s |
0.5s |
25s |
4 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión normal) |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s Pro (Modo de impresión rápida) |
0.1mm |
3.2s |
0.5s |
25s |
4 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5s (Modo de impresión normal) |
0.05mm |
3.6s |
0.5s |
30s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Mono M5s (Modo de impresión rápida) |
0.1mm |
3.8s |
0.5s |
30s |
5 |
1 |
5mm |
20mm/s |
20mm/s |
|
Photon Mono M5 |
0.05mm |
2.8s |
0.5s |
25s |
5 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon M3 Max |
0.05mm |
3s |
2.5s |
50s |
6 |
1 |
10mm |
2mm/s |
3mm/s |
|
Photon Mono X 6Ks |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono X2 |
0.05mm |
2.5s |
0.5s |
20s |
5 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 2 |
0.05mm |
2.5s |
1s |
25s |
5 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon D2 |
0.05mm |
2.5s |
1s |
28s |
5 |
16 |
5mm |
2mm/s |
3mm/s |
|
Photon M3 Plus |
0.05mm |
1.5s |
0.1s |
23s |
3 |
1 |
6mm |
6mm/s |
6mm/s |
|
Photon M3 |
0.05mm |
2s |
0.5s |
23s |
4 |
1 |
6mm |
3mm/s |
4mm/s |
|
Photon M3 Premium |
0.05mm |
2.5s |
0.5s |
25s |
2 |
1 |
8mm |
6mm/s |
6mm/s |
|
Photon Ultra |
0.05mm |
2s |
1s |
35s |
4 |
1 |
5mm |
2mm/s |
2mm/s |
|
Photon Mono X |
0.05mm |
2s |
0.5s |
28s |
4 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono 4K |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono X 6K |
0.05mm |
2s |
0.5s |
23s |
6 |
1 |
8mm |
2mm/s |
3mm/s |
|
Photon Mono SQ |
0.5mm |
2.3s |
0.5s |
23 |
6 |
1 |
5mm |
3mm/s |
3mm/s |
|
Photon Mono SE |
0.05mm |
1.5s |
0.5s |
30s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon Mono |
0.05mm |
2s |
0.5s |
40s |
6 |
1 |
6mm |
4mm/s |
6mm/s |
|
Photon S |
0.05mm |
8s |
1s |
60s |
6 |
1 |
6mm |
3mm/s |
3mm/s |
Conclusión
Así que, ya lo sabes, tener acceso a esta información no solo te ahorra tiempo y esfuerzo, sino que te permite explorar nuevas posibilidades y sacar el máximo provecho de tus impresoras Anycubic. Con estos parámetros, no tienes excusa para no obtener las mejores impresiones posibles. ¡Atrévete a experimentar y verás cómo te conviertes en todo un experto en resinas! 😎💡
Antes de que te vayas, guarda este artículo en tus favoritos 📌. Ya sea que necesites ajustar algo en tus impresoras o quieras optimizar tus impresiones en el futuro, tendrás esta guía a mano. ¡No te arrepentirás!
Si tienes alguna duda o necesitas ayuda con tus impresiones, recuerda que siempre estamos por la comunidad de Telegram en @MrResinCrew para apoyarte. ¡Nos vemos en el próximo post! 👋
¡Explora más artículos en nuestro blog de Mr Resin y descubre todo lo que necesitas saber sobre impresión 3D con resina! 🖨️✨
-
¿Quieres más tips y ofertas? ¡Únete a nuestro grupo de Telegram aquí y no te pierdas nada! 🚀
