Anycubic ABS-Like Resin 2.0: Tough, Drillable & Tappable Functional Parts (1 kg)
Quick summary: The Anycubic ABS-Like Resin 2.0 is a second-generation photopolymer resin engineered for functional parts, prototypes, and models that need to hold up to real-world use. According to Anycubic, it achieves a hardness of 83–85 HD and a flexural modulus of 1,800 MPa, with low shrinkage and low viscosity (283 mPa·s at 25 °C) for fast printing and solid detail. Compatible with 405 nm LCD/DLP printers.
Key Specs at a Glance
-
Type: ABS-like photopolymer resin (2nd generation)
-
Hardness: 83–85 HD
-
Tensile strength: 34–42 MPa
-
Elongation at break: 20–25%
-
Volumetric shrinkage: 3.9–4.9%
-
Compatibility: 405 nm UV-cure LCD/DLP resin printers
-
Machinability: drillable and tappable
-
Format: 1 kg bottle, available in 11 colors
What Is ABS-Like Resin 2.0 Best Used For?
Anycubic positions this as a high-performance entry-level engineering resin, suited for general functional parts, prototypes, and display models. Its main strength is the balance between rigidity and toughness — hard enough to resist wear, yet tough enough not to snap under stress. According to the manufacturer, printed parts can be drilled and tapped directly.
Available in opaque colors, one clear option, and four translucent variants for light-diffusing effects. Looking for more options in this category? Browse our full range of ABS-like resins.
How Does It Compare to Standard Resin?
Compared to standard photopolymer resins, this 2.0 ABS-like formula is designed to be far less brittle. Anycubic highlights its high toughness and impact resilience, with 20–25% elongation at break and an Izod impact resistance of 109 J/m. Its low viscosity and good flow help reduce layer wait times and allow air bubbles to dissipate quickly, resulting in smooth surfaces and fine detail. It also offers strong build plate adhesion and minimal odor.
Need even more impact resistance for heavy-duty parts? Check out our tough 3D resins.
Printer Compatibility
According to Anycubic, this resin works with any 405 nm UV-cure LCD/DLP printer, with optimized performance on Anycubic resin printers — Photon Workshop already includes built-in profiles for this resin.
Technical Specifications
Data provided by the manufacturer (Anycubic).
| Property |
Value |
| Wavelength |
365–405 nm |
| Viscosity (25 °C) |
283 mPa·s |
| Density |
1.06–1.09 g/cm³ |
| Hardness |
83–85 HD |
| Tensile Strength |
34–42 MPa |
| Elongation at Break |
20–25% |
| Flexural Modulus (highlighted) |
1,800 MPa |
| Young's Modulus |
1,800–2,200 MPa |
| Izod Impact Strength |
109 J/m |
| Volumetric Shrinkage |
3.9–4.9% |
| Printing Temperature |
20–50 °C |
| Washing |
95% IPA, minimum 3 min |
| Post-Cure |
405 nm, 25,000–30,000 µW/cm², 3 min |
Usage Tips
-
Before printing: Shake the bottle thoroughly, clean the vat and build plate, and check the FEP film for damage. Recommended ambient temperature: 20–35 °C.
-
Exposure settings (reference): At 0.05 mm layer height, Anycubic recommends 2 s exposure and 28 s base exposure (5 layers) for the Photon Mono M7, or 2.8 s and 32 s for the Photon Mono 4.
-
Washing: Clean prints with isopropyl alcohol at least 95% (around 10 minutes in a wash and cure machine).
-
Drying and curing: Allow prints to dry completely before curing, then post-cure for 3–5 minutes. Remove parts from the wash solution as soon as washing is done.
-
Storage: Store at room temperature, away from light. If pigment has settled, stir or shake before use.
-
Safety: Wear nitrile gloves and eye protection, and ensure adequate ventilation. Cure any resin waste before disposal.
Frequently Asked Questions about Anycubic ABS-Like Resin 2.0
What improvements does version 2.0 offer?
According to Anycubic, the resin delivers high precision, low shrinkage, and a well-balanced combination of strength and toughness.
Can prints be drilled, tapped, or machined?
Yes. Anycubic states that prints support drilling, tapping, and machining thanks to their 83–85 HD hardness.
Is it compatible with non-Anycubic printers?
Yes, it works with any 405 nm LCD/DLP printer regardless of brand, though Anycubic optimizes it for their Photon lineup.
What is the viscosity?
283 mPa·s at 25 °C per Anycubic — relatively low for a resin of this type.
How much does it shrink?
3.9–4.9% by volume, according to Anycubic.
Does it smell strong?
Anycubic reports minimal odor; even so, always print with adequate ventilation.
What should I use to wash my prints?
Isopropyl alcohol at least 95%, for a minimum of 3 minutes. This is not a water-washable resin.
How long does post-curing take?
Anycubic recommends a post-cure of 3 minutes at 405 nm (3–5 minutes per their usage instructions), always with the part fully dry beforehand.
Is there a clear version?
Yes, it's available in Clear (transparent) as well as translucent blue, green, red, and yellow, in addition to opaque colors.
What should I do if resin gets on my skin?
Wash immediately with soap and water — not alcohol — and seek medical advice if irritation develops, as recommended by Anycubic.