Anycubic Water Washable 2.0: Complete Guide 2026 | Mr Resin 💧

If you've made it this far, you probably know the feeling: you love 3D printing, but the hassle of isopropyl alcohol (IPA) puts you off. The smell, the danger of having a flammable liquid at home, the cost... What a pain! 😩 What if I told you that you could forget all that and clean your parts with just water?

The promise of the Anycubic Water Washable 2.0 at just €20.99 is that simple and powerful. It's an Anycubic resin for 3D printers designed for beginners and anyone who prints at home. It's ideal if you're looking for an easy, safe process with no strong odors. Let's see if it really is as good as they say.

What is the Anycubic Water Washable 2.0 resin? 🤔

Think of a standard resin like oil: it doesn't mix with water. That's why you need a solvent like alcohol to clean it. The Anycubic Water Washable 2.0, on the other hand, is different. Its chemical formula includes special components (called hydrophilic) that make it "water-friendly". 🤝💧

This means that when you finish printing, you can put the part directly under the tap. The water washes away the leftover liquid resin, leaving your model clean and ready for curing. It's that easy!

Improvements in version 2.0 vs. 1.0

This "2.0" isn't just marketing. Anycubic listened to the community and improved the weak points of the first version:

• Better build plate adhesion: Say goodbye to failed prints! Parts now stick much better.
• Works at 15-20°C: You no longer need to keep the room at a tropical temperature to print.
• Less brittle: The finished parts are a bit more resistant.

These improvements make the experience with Anycubic resins much more reliable, especially if you're just starting out.

Step-by-step washing process 💧

Cleaning your parts with this resin is a breeze. Forget about special chemical gloves and forced ventilation. It's easier than it looks!

Materials you need:

• A couple of containers with water (food storage containers, for example).
• An old toothbrush or a soft brush.
• Nitrile gloves (liquid resin is still a chemical).
• Paper towels for drying.

Let's get to it! Follow these 5 steps:

1. Remove the piece from the platform: Carefully use the spatula to detach your creation. Do it gently to avoid damaging it.
2. First wash (the rough one): Submerge the piece in the first container with water and shake it for 1-2 minutes. You'll see how the water turns cloudy instantly. This is to remove the worst of it!
3. Second wash (the fine one): Move the piece to the second container with clean water. Now, use the soft brush to gently scrub all the corners and details. This is where you get the piece perfect. ✨
4. Drying: This step is key! Thoroughly dry the piece with paper towels or an air blower. Not a single drop of water should remain, especially in the recesses, or it could crack during curing.
5. Curing: With the piece clean and dry, place it in your UV curing station or leave it in the sun. In a few minutes, it will harden completely and be ready.

VERY IMPORTANT! What do I do with the dirty water? 🌍 Never pour it down the drain. Resin is toxic to the environment. The solution is simple: leave the container in the sun for a few hours. The UV light will cure the resin residue, which will solidify. Then, you can filter the water and throw the small plastic pieces in the regular trash. Easy as that!

Advantages of Water Washable 2.0 👍

Why has it become so popular? For these reasons:

• Almost odourless: Ideal for printing in an apartment or a room without bothering anyone. Your nose will thank you. 👃
• Safer: By not using alcohol, you eliminate the risk of having flammable liquids at home. More peace of mind for you and your family.
• Money savings: Although the bottle costs a little more, you save yourself from buying large containers of alcohol over and over again. In the long run, it pays off. 💰
• Perfect for beginners: It simplifies the process so much that it takes away the fear of getting started. Less frustration, more fun!
• Many colours: You have a wide range of options to bring your creations to life.
• Better adhesion: Version 2.0 has greatly reduced print failures because the first layers adhere much better.

Are these advantages convincing? Give it a try and you'll see the difference. View Water Washable 2.0 and start printing in a cleaner and simpler way.

Limitations and drawbacks of this resin 👎

Not everything is perfect. It's important that you also know its weak points so you can decide if it's right for you:

• Less resistant: Parts are somewhat more fragile than those made with standard resin. It's not the best option for functional parts or those that will need to withstand impacts.
• Not for mechanical parts: If you need gears, supports or housings that can take a beating, it's better to go with an ABS-like resin.
• Slightly higher price: The bottle is slightly more expensive than that of a standard resin.
• Wastewater must be treated: You can't pour it down the drain, as we've already seen. It requires one small extra step.
• Not for maximum detail: If you're looking for the most extreme definition for painting contests, a specific high-definition resin will give you better results.

Comparison: Water Washable vs. Standard V2 🥊

To make it crystal clear, here's a straight-to-the-point comparison table.

Verdict: When to choose each one?

• Choose Water Washable 2.0 if: Convenience, low odour and safety are your priority. Perfect for printing miniatures and decorative figures at home without any hassle.
• Choose Standard Resin V2 if: You want the lowest possible price and don't mind the alcohol washing process. It's a workhorse for all kinds of projects.

Available colours: a rainbow of options! 🎨

One of the coolest things about the Anycubic Water Washable 2.0 is the variety of colours. You have 11 options to choose from, so you're sure to find the perfect one for your project.

The available colours are:

• Opaque: Black, White, Grey, Purple, HD Grey.
• Translucent: Red, Blue, Green, Yellow.
• Special: Smoke Grey, Clear.

Which one should you choose as a beginner? We recommend starting with Grey. Why? Because grey is where details and any imperfections show up best. It will help you calibrate your 3D printer and learn faster. Translucent colors are great for light effects, while opaque ones give a solid, professional finish. Don't be afraid to experiment!

You can view the full color range of Anycubic Water Wash 2.0 here

Tips for the best results ✨

To get the most out of your resin, keep these tricks in mind:

1. Shake the bottle well: Before each use, shake the bottle for at least one minute. The components of the resin tend to separate, and this ensures a homogeneous mixture.
2. Use the correct settings: Don't take any chances. Search online for exposure tables for your 3D printer model and this resin. Starting with the correct settings will save you a lot of headaches. On our blog we have a guide to Anycubic resin settings.
3. Control the temperature: Try to keep the room above 15°C. Although the V2 has improved a lot, resin likes a bit of warmth.
4. Don't over-cure: Too much UV light can make parts turn yellow and more brittle. Follow the recommended times.
5. Avoid water in hollow sections: If your print has hollow parts, make sure to add drainage holes. If water gets trapped inside during curing, the part could crack!

Who is this resin ideal for? 🤔

Let's sum it up so you have no doubts.

✅ It's perfect for you if:

• You're a beginner and want everything to be easy.
• You print in an apartment or at home and don't want bad odors.
• You make miniatures and decorative figures.
• You value convenience and safety above all else.

❌ Better look for another resin if:

• You need functional and resistant parts (gears, brackets...).
• You're looking for the highest level of detail for competition.
• You're going to create mechanical parts that will be subject to stress.

```

FAQ: Frequently asked questions

1. Can tap water be used? Yes! That's its main advantage. You don't need anything else. If your water is very hard, a final rinse with distilled water can improve the finish, but it's not required.

2. Is it really odorless? Compared to a standard resin + alcohol, the smell is very low, almost imperceptible for most people. Even so, always ventilate the room for safety.

3. Does it work with Elegoo or Creality 3D printers? Yes, no problem. It is compatible with most LCD/SLA 3D printers on the market (405nm), such as Elegoo, Creality, Phrozen, etc.

4. Are the parts water-resistant after curing? Absolutely. Once cured, the part is a solid plastic and completely water-resistant. The "washable" property only exists when the resin is in liquid form.

5. Can I mix it with standard resin? No. Don't do it. They have different chemistries and the result will be a disaster. Each resin in its own tank!

Conclusion: is this your ideal resin? 🚀

The Anycubic Water Washable 2.0 is a fantastic resin that eliminates the main barriers to entry in 3D printing: the smell, the cost, and the complexity of alcohol.

It is the ideal option if you value convenience and want a clean and safe process, especially if you print at home. It lets you focus on the fun part: creating!

Ready to try 3D printing without the hassle? Stop by our store and take a look at the full range of Anycubic resins.

And don't leave without joining our Telegram community. Discounts, coupons, news and exclusive events are waiting for you there. Oh! And don't forget to subscribe to our Newsletter so you never miss a deal.

✨Happy Printing! 🚀