Anycubic Photon Mono M7 Pro

Anycubic Photon Mono M7 Pro: The Fully Automated 14K Resin 3D Printer

The Anycubic Photon Mono M7 Pro is one of the most advanced LCD resin 3D printers in its class, combining a 14K monochrome screen, an auto-resin refill system, and dynamic vat temperature control to deliver a nearly hands-free workflow. It's designed for demanding makers, miniature and figure hobbyists, jewelers, prototypers, and design studios who want the highest level of detail without sacrificing speed or ease of use. Whether you're coming from an FDM printer or a more basic resin model, the jump in definition and automation is immediate and striking.

With a build volume of 223 × 126 × 230 mm (6.5 usable liters of height), the M7 Pro isn't just precise — it lets you print large parts or fill the build plate with dozens of miniatures in a single run. Below, we break down everything that makes it stand out.

Precision, Screen, and LighTurbo 3.0 Light Source

At the heart of the Photon Mono M7 Pro is its 10.1-inch monochrome LCD with 14K resolution (13,312 × 5,120 pixels), delivering an XY resolution of 16.8 × 24.8 microns. This pixel density makes it possible to reproduce incredibly fine details — skin textures, scales, weapon edges, facial features, and jewelry settings — with a sharpness that's hard to match at this price point.

Lighting is handled by the LighTurbo 3.0 optical system, built around a COB light source paired with a Fresnel lens and a light uniformity algorithm. The result is a light intensity of approximately 5,500 μW/cm² and over 90% uniformity across the entire surface, ensuring parts cure evenly from the center to the corners of the build plate. Consistent lighting is essential for uniform layer adhesion and for preventing soft or undercured spots.

On the Z-axis, the printer features a dual linear rail system that delivers positioning accuracy down to 10 microns, minimizing visible layer lines and keeping the assembly stable during fast movements.

Automation and Real Smart Features: Auto-Leveling, Auto-Refill, and Temperature Control

What truly sets the M7 Pro apart is its level of automation. Here are its most notable features:

• Leveling-free design: the build plate comes factory-calibrated and requires no tedious manual leveling with a sheet of paper. Just install the plate and start printing.
• Auto resin refill system: using a peristaltic pump, the printer automatically refills the vat as resin is consumed and alerts you when levels run low. Once the print is done, it can drain the leftover resin back into the reservoir, reducing waste and minimizing contact with the material.
• Dynamic resin vat temperature control: a built-in heating system keeps the resin at its optimal temperature (~25 °C), stabilizing viscosity and improving print consistency — even in winter or cold workshops.
• Upgraded ACF film: the vat features a low release-force ACF release liner that makes layer separation easier, reduces stress on printed parts, and offers a longer service life compared to standard FEP film.

These automated features mean less babysitting, fewer failed prints due to resin runout, and a higher overall print success rate — especially valuable during long overnight print runs.

Design and build quality

The Photon Mono M7 Pro keeps the solid, robust aesthetic Anycubic is known for, measuring 312 × 315 × 520 mm and weighing approximately 12.8 kg — providing excellent stability during fast Z-axis movements. The build plate features a laser-engraved surface to maximize first-layer adhesion, and the vat holds up to 1 liter of resin. The machine is operated via an intuitive touchscreen, and a cover shields the print from ambient light and fumes.

Print speed

Despite its ultra-high resolution, the M7 Pro is no slouch when it comes to speed: it reaches up to 130 mm/h with standard resins and up to 170 mm/h with high-speed resins at a 0.1 mm layer height. This combination of fine detail and fast throughput makes it a highly productive machine, capable of completing in just a few hours jobs that would have taken a full day on older models.

Specifications

Compatible Resins & Software

The M7 Pro is compatible with virtually all 405nm UV resins on the market. You can use 3D printing resins of every type depending on your project: from clear resins for translucent parts, to ABS-like tough resins for functional components, or flexible resins. Take full advantage of its high-speed mode with optimized Anycubic resins. For post-print cleaning without IPA, water-washable resins are also fully supported.

For slicing, the M7 Pro works seamlessly with Photon Workshop (Anycubic's official slicer), as well as Chitubox and Lychee Slicer. The Anycubic app also lets you monitor prints and send jobs wirelessly over WiFi.

What's in the Box?

The M7 Pro arrives ready to print right out of the box. Inside you'll find the printer with resin vat and ACF film pre-installed, the laser-engraved build plate, the auto-refill system with reservoir and pump, the power supply, basic tools (spatulas, gloves, filters), and documentation including a quick-start guide. We recommend picking up post-processing consumables from day one to complete your setup.

Who Is It For?

This printer is ideal for miniature and wargaming hobbyists, painters and scale modelers, jewelers and product designers, and for anyone already familiar with resin printing who wants to step up to maximum resolution with minimal maintenance. Its automation also makes it a great fit for small print-on-demand businesses that need reliable performance over long print runs. If you're looking for high-definition 3D printers, this is one of the most complete options available.

Workflow: Print, Wash, and Cure

Resin printing involves three steps. 1) Print: slice your model, send it via WiFi or USB, and let the M7 Pro handle resin refilling and temperature control. 2) Wash: remove the print and clean off uncured resin with isopropyl alcohol or water (depending on the resin). 3) Cure: expose the print to UV light to achieve its final mechanical properties. To automate washing and curing, we recommend a wash & cure machine, and for cleaning supplies, check out our alcohol and post-processing products.

Recommended Accessories

To get the most out of your printer and keep it protected, we suggest: a screen protector to shield the LCD from resin spills; replacement FEP, nFEP, and ACF film for the vat; and cleaning and finishing supplies. If you plan to paint your prints, take a look at our painting auxiliaries.

M7 Pro vs. Photon Mono M7: What's the Difference?

The M7 Pro sits above the standard Photon Mono M7. Both printers share the same high-speed philosophy, but the Pro model adds 14K resolution (versus the lower resolution of the base model), an automatic resin refill system, dynamic vat temperature control, and an upgraded ACF film. In short: the M7 is a great entry point into high-speed resin printing, while the M7 Pro adds automation and detail for those who want the most convenient and precise experience.

Frequently Asked Questions

What resolution does the Anycubic Photon Mono M7 Pro have?

It features a 10.1-inch mono LCD screen with 14K resolution (13,312 × 5,120 pixels), delivering an XY resolution of 16.8 × 24.8 microns — ideal for maximum detail.

Does it require manual leveling?

No. The M7 Pro features a leveling-free design: it comes pre-calibrated from the factory, so you can set up the build plate and start printing right away.

What is the automatic resin refill system?

It's a peristaltic pump that automatically refills the vat as resin is consumed and alerts you when levels run low. Once printing is complete, it can return leftover resin to the reservoir, reducing waste and minimizing contact with the material.

What resins can I use?

The M7 Pro is compatible with any 405nm UV resin, including high-speed resins to take full advantage of its 170mm/h print speed. Browse our full selection in the resins collection.

How fast does it print?

Up to 130mm/h with standard resins and up to 170mm/h with high-speed resins at 0.1mm layer height, thanks to the LighTurbo 3.0 optical system.

What slicing software is compatible with the M7 Pro?

It works with Photon Workshop (Anycubic's official slicer), Chitubox, and Lychee Slicer. Files can be sent via USB, WiFi, or LAN, and it also supports the Anycubic mobile app.