Anycubic Photon P1 Max, impresora 3D de resina de gran formato con figura impresa de elefante

Anycubic Photon Mono M7 Max

$869.00
Skip to product information
Anycubic Photon P1 Max, impresora 3D de resina de gran formato con figura impresa de elefante

Anycubic Photon Mono M7 Max

$869.00
Payment methods
  • American Express
  • Apple Pay
  • Google Pay
  • Klarna
  • Maestro
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Reliable shipping

Hassle-Free Returns

Anycubic Photon P1 Max: Large-Format 12K Resin 3D Printer

Overview: The Anycubic Photon P1 Max is a large-format MSLA resin 3D printer featuring a 14-inch 12K mono LCD, a build volume of 285.5 × 214 × 300 mm (18.3 liters), Wave Release film that cuts separation force by over 60%, and a heated 1.9 L vat supporting resins up to 8,000 cps. It's designed for advanced users, studios, and small-batch production that demand large parts or full build plates without sacrificing precision.

Key Specs at a Glance

  • Build Volume: 285.5 × 214 × 300 mm (18.3 L) — nearly three times the build volume of the Photon P1.
  • Screen: 14" 12K mono LCD (11,520 × 8,640 px), square 24.8 µm pixel size.
  • Light Source: LighTurbo 4.0 with 92% uniformity.
  • Release System: Wave Release film — over 60% reduction in peel force.
  • Resin Compatibility: Up to 8,000 cps, with a 1.9 L vat heated to 35 °C.
  • Mechanical Precision: Dual linear rails + C7 ball screw, ±0.01 mm repeatability.
  • Automation: Auto-leveling, AI print inspection, and Intelligent Printing Assistant 3.0.

How Large Can I Print on the Photon P1 Max?

The usable print area is 285.5 × 214 mm with 300 mm of build height. In practice, that means busts and statues up to 25–30 cm tall in a single piece, cosplay helmets and armor parts in two or three sections instead of six or eight, or a full plate packed with dozens of 32 mm miniatures in a single run. It's the natural upgrade when a desktop printer forces you to split models and deal with seams that need filling and sanding.

What Level of Detail Does the 14" 12K Screen Deliver?

The 11,520 × 8,640-pixel panel uses square 24.8 µm pixels, meaning X and Y resolution are identical — curves and textures look the same regardless of how you orient your model. The LighTurbo 4.0 light engine (COB LED, Fresnel lens, and light mask) achieves 92% uniformity. On a large build plate this matters more than the "K" count: it ensures a part printed in the corner cures identically to one in the center, so you can use the entire plate and get consistent results across every print. Layer thickness ranges from 0.02 to 0.15 mm.

Why Don't Large Parts Fail? Wave Release and the Heated Vat

The biggest challenge when printing large cross-sections in resin is suction force during layer separation: the larger the surface area, the greater the peel stress, and the higher the risk of print failure or deformation. The P1 Max tackles this on two fronts:

  • Wave Release: A release film that, according to Anycubic, reduces peel force by over 60%. Less stress on supports and the model means cleaner surfaces and fewer failed prints.
  • Dynamic Release 3.0: The printer measures peel force in real time on every layer and adjusts the lift motion accordingly.
  • 1.9 L Heated Vat (up to 35 °C): Keeps resin fluid and at a stable viscosity even in a cold workspace, reducing suction and enabling the use of technical resins up to 8,000 cps.

What Automation Features Are Included?

The Intelligent Printing Assistant 3.0 bundles several time- and resin-saving features:

  • Factory calibration and Auto-Leveling 3.0, with a self-check before every print and an assistant that displays the pressure at each of the four corners of the build plate.
  • AI-powered inspection that monitors build plate placement, first-layer adhesion, resin levels, and debris in the vat. Disabled by default and alerts you when it is recording.
  • Dynamic Light-Off Compensation (Light-Off 3.0), which adjusts the pause between layers to increase print speed without sacrificing quality.
  • Pre-configured exposure profiles for Anycubic resins.

How is it built?

The Z-axis travels on dual linear rails with a C7-grade ball screw, delivering ±0.01 mm repeatability — the foundation of consistent layer-to-layer precision. The build plate is ground steel and, along with the resin vat, features a quick-release mechanism. The exposure screen can be removed tool-free should it ever need replacing. The cover opens past 45° for comfortable access, operation is handled through a 4.5" touchscreen, and noise levels stay below 45 dB. Overall dimensions are 430 × 414 × 625 mm with a weight of 21.6 kg.

Technical Specifications

Technology MSLA / LCD, 405 nm
Screen 14'' 12K Mono LCD (11,520 × 8,640 px)
XY Resolution 24.8 × 24.8 µm
Layer Height 0.02 – 0.15 mm
Print Speed 15 – 25 mm/h (0.05 mm layer, standard resin)
Build Volume 285.5 × 214 × 300 mm (18.3 L)
Light Source LighTurbo 4.0: COB + Fresnel lens + mask, 92% uniformity
Release Mechanism Wave Release (60%+ less peel force) + Dynamic Release 3.0
Resin Vat 1.9 L, heated up to 35 °C, quick-release
Supported Viscosity Up to 8,000 cps
Z-Axis Dual linear rails + C7 ball screw, ±0.01 mm repeatability
Build Plate Ground steel, quick-release
Leveling Auto Leveling 3.0 + factory calibration
Monitoring AI inspection (build plate, first layers, resin level, debris detection)
Control 4.5'' touchscreen
Connectivity Wi-Fi, LAN (Ethernet), USB 2.0
Slicers Anycubic Photon Workshop, Chitubox, Lychee, Tango
Noise Level ≤ 45 dB
Power Supply AC 110–240 V, 50/60 Hz; max. power consumption 296 W
Dimensions 430 × 414 × 625 mm
Weight 21.6 kg

Photon P1 Max vs Photon P1 vs Photon Mono M7 Max

Photon P1 Max Photon P1 Photon Mono M7 Max
Build Volume 285.5 × 214 × 300 mm (18.3 L) 223 × 126 × 230 mm (6.5 L) 298 × 164 × 300 mm (14.7 L)
Resolution 12K, 11,520 × 8,640 px 14K, pixel 16.8 × 24.8 µm 7K, 6,480 × 3,600 px
Wave Release Yes Yes See spec sheet
Ball Screw Yes Yes See spec sheet
Resin Viscosity up to 8,000 cps 8,000 cps See spec sheet
Best for Large prints with maximum detail and batch production Miniatures and small high-precision parts in a desktop footprint Large-format printing on a tighter budget

If you mainly print miniatures and smaller parts, the Anycubic Photon P1 delivers outstanding detail in a more compact form factor. If you want large-format printing at the lowest possible cost, take a look at the Photon Mono M7 Max. The P1 Max is the right choice when you need build volume, 12K resolution, and the reliable peel performance of the P1 lineup all in one machine.

Compatible Resins and Slicing Software

You can slice with Anycubic Photon Workshop — which includes built-in machine profiles — or use Chitubox, Lychee, or Tango if you already have a preferred workflow. Jobs are sent via WiFi, Ethernet, or USB. For materials, any 405 nm LCD resin works, including high-viscosity technical resins. Browse the full range in our 3D resins section: Anycubic resins with official profiles, high-temperature resistant resins for functional parts, and water-washable resins — a huge practical advantage with large prints, since you won't need to fill a massive vat with IPA. With a 1.9 L tank, buying 1 kg bottles or larger makes good sense.

What's in the Box?

  • Anycubic Photon P1 Max printer
  • Build plate and resin vat
  • Two scrapers, Allen keys, and resin filter
  • Gloves, mask, and cleaning wipes
  • USB drive, power cable, and user manual

The dual color/material printing kit is sold separately as an optional accessory.

Who Is the Photon P1 Max For?

  • Sculptors, bust painters, and diorama builders: print pieces 25–30 cm tall with no cuts or seams.
  • Cosplay and prop making: helmets, armor, and props in far fewer separate parts.
  • Miniature sellers and batch production: more pieces per plate with consistent quality across the entire print surface.
  • Studios, workshops, and labs: daily production runs using technical, rigid, flexible, castable, or dental resins.

Workflow: Print, Wash, and Cure

Every resin print goes through three stages: printing, washing off uncured resin (with isopropyl alcohol, or water if using a water-washable resin), and UV curing to reach final hardness. For prints this size, your post-processing station needs to keep up: the Anycubic Wash & Cure 3 Max is the natural companion thanks to its capacity, and you'll find more options in our wash and cure stations collection. Round out your setup with IPA and post-processing supplies.

Recommended Accessories

Anycubic Photon P1 Max — Frequently Asked Questions

What is the build volume of the Anycubic Photon P1 Max?

The build volume is 285.5 × 214 × 300 mm — 18.3 liters total. That's nearly triple the Photon P1 (6.5 L) and larger than the Photon Mono M7 Max (14.7 L).

What resolution does the Photon P1 Max have?

It features a 14-inch mono LCD screen at 12K resolution (11,520 × 8,640 px) with a 24.8 µm square pixel size and layer heights starting from 0.02 mm.

What's the difference between the Photon P1 and the Photon P1 Max?

Size. Both share Wave Release, LighTurbo 4.0, ball screw, and compatibility with resins up to 8,000 cps. The P1 features a 10.1'' 14K screen and 6.5 L build volume; the P1 Max steps up to a 14'' 12K screen and 18.3 L.

What resins are compatible?

Any 405 nm LCD resin, including high-viscosity technical resins up to 8,000 cps: standard, rigid, flexible, castable, and dental. Pre-configured profiles for Anycubic resins are included.

What slicing software does it use?

Anycubic Photon Workshop, with additional support for Chitubox, Lychee, and Tango. Files can be sent via Wi-Fi, LAN, or USB.

Does it have a camera or print failure detection?

Yes. It includes an AI inspection system that monitors platform placement, first-layer adhesion, resin level, and debris in the vat. Disabled by default.

Do I need to level the build plate?

Not manually. It comes factory-calibrated and performs automatic leveling with a self-check before every print.

Can it print in two colors or two materials?

Yes, with the dual color/material printing kit, sold separately.

Do I need a wash and cure machine?

It's not required, but for large prints it saves significant time and improves surface quality. The Wash & Cure 3 Max is sized to handle prints at this scale.

How much space does it need and what setup is required?

It measures 430 × 414 × 625 mm and weighs 21.6 kg. It requires a sturdy, level table, enough overhead clearance to open the cover, a standard outlet (110–240 V, up to 296 W), and a well-ventilated area.

Frequently Bought Together

Mr Resin

Mr Resin

Your 3D Printing Supplies Destination!

You may also like