Complete Guide to Setting Up Your Anycubic Photon Mono 4 🌟

Introduction

The Anycubic Photon Mono 4 is a compact and precise resin 3D printer, perfect for beginners and advanced users looking for professional results. In this guide, we will explain step by step how to set up and start printing with your Photon Mono 4. Get ready to get the most out of your 3D printer!

⚡ Free guide for makers Get the most out of your Photon Mono 4 Download the Anycubic Resin Field Manual 2026 for free — 48 pages with exact settings, calibration tips and fault diagnosis for the entire Anycubic range. Download free guide ⬇ No spam. No commitment. Just real calibration tips and tricks.

Step 1: Unboxing and Content Verification 📦

Before getting started, make sure all components are present and in perfect condition:

• Anycubic Photon Mono 4 3D printer.

• Print platform.

• Resin tank.

• High-resolution monochrome LCD screen.

• Accessories (power cable, USB memory, tools).

• User manual.

Tip: If any component is missing or you notice any issue, contact Anycubic support before continuing.

Step 2: Installation and Leveling 🛠️

1. Place the 3D printer

Place the Photon Mono 4 on a stable, level, and well-ventilated surface. This will minimize vibrations and ensure high-quality prints.

2. Platform leveling

• Place a sheet of paper between the base and the platform.

• Loosen the platform screws.

• Lower the platform until the paper is snug but can move slightly.

• Tighten the screws to secure the platform in place.

See also: For more details on resin settings and parameters, check out our article here.

Step 3: Software Setup 💻

Download a slicing software such as Chitubox or Lychee Slicer, both compatible with the Photon Mono 4.

Basic setup:

1. Select the Anycubic Photon Mono 4 as the default 3D printer.

2. Adjust the initial settings:

   • Layer resolution.

   • Exposure time.

   • Z lift speed.

Tip: Discover the best platforms for finding free STL files in this article.

Step 4: Resin Preparation 🧪

Resin recommendations:

• Anycubic Texture Resin: Ideal for precise details and matte finishes.

• Water-washable resin: Perfect for avoiding the use of isopropyl alcohol.

Steps:

1. Shake the resin bottle well before use.

2. Fill the resin tank up to the indicated maximum line.

3. Use nitrile gloves and work in a ventilated area to avoid direct contact with the resin.

Step 5: First Print 🎨

Process:

1. Save your sliced file to a USB drive.

2. Insert the USB into the printer.

3. Configure the final settings on the touchscreen.

4. Press "Print" and watch your model take shape.

Tip: Adjust the exposure time and other settings if the initial results do not meet your expectations.

Step 6: Post-processing 🛠️

Washing:

• Remove your model from the build plate.

• Submerge it in 99.9% isopropyl alcohol to remove uncured resin. Check our guide here.

Curing:

• Use a UV curing machine to harden your model and give it a professional finish.

Step 7: Regular Maintenance 🔧

• Clean the resin tank and LCD screen after each use.

• Inspect the FEP film and replace it if worn.

• Store leftover resin in its original container to avoid contamination.

Tip: Carry out preventive maintenance to extend the lifespan of your printer.

Conclusion 🎯

The Anycubic Photon Mono 4 is a versatile and efficient 3D printer that allows you to create detailed and professional models. By following this guide, you'll be ready to make the most of your 3D printer and bring your ideas to life. Happy Printing! 🚀

Additional Resources 📚

• Resin parameters and settings.

• Free STL files.

• Guide on isopropyl alcohol.

Shop Anycubic resins — all resins compatible with your 3D printer.

Explore more articles on our Mr Resin blog and discover how to take your 3D printing projects to the next level! 📚✨

Want more tips and deals? Join our Telegram group here and don't miss a thing! 🚀