💧 Anycubic Water-Washable Resin, Water-Wash Resin 2.0 HD Grey – Extreme detail, washing with water

The water-washable resin Anycubic Water-Wash Resin 2.0 HD is optimized for micro-details, sharp edges and fine text without compromising strength. It retains all the advantages of Water-Wash 2.0: cleans with water, low odour, low shrinkage and low viscosity that flows well even at 15–20 °C. The neutral grey tone enhances volumes and makes inspection and painting easier.

🎯 Why choose the HD version

• HD Precision: detail reproduction of up to ≈0.15 mm with very smooth surfaces.
• Water-washable: convenient, safe and cost-effective post-processing (fewer chemicals).
• More resistant: elongation 16–22%; fewer brittle parts after curing.
• Low shrinkage: reliable fits and stable dimensions.
• Low odour: a more pleasant 3D printing experience.
• Anti-yellowing: cleaner and longer-lasting colours.
• Stable flow: low viscosity and better bed adhesion in cold environments.

🧪 Properties (typical ranges)

• Viscosity: 190–230 mPa·s · Density: 1.07–1.09 g/cm³
• Hardness: 82–85 HD · Tensile strength: 38–43 MPa · Young's modulus: 2350–2950 MPa
• Flexural strength: 48–60 MPa · Modulus: 2300–3000 MPa
• Elongation: 16–22% · Mould shrinkage: 2.2–5.5%
• Heat deflection temperature: 60–65 °C

⚙️ Indicative settings

Layer height 0.05 mm · exposure time 2–3 s · 4–6 base layers · light-off 0.5–1 s. Adjust according to your 3D printer and temperature.

🧼 Use and post-processing (summary)

1. Shake well and check that the vat/platform are clean.
2. Print using the recommended settings.
3. Wash with water (agitation or ultrasonic) and drain.
4. Remove supports and cure fully to achieve the intended properties.